-
-
Using FFST dumps
-
Using the VTAM internal trace
-
VTAM internal trace (VIT) record descriptions
-
**** Entry for SDUMP taken for CSDUMP request
-
**** Entry for VTAM CSDUMP trigger
-
**** Entry for VTAM ISTORFBA DUMP
-
**** Entry for VTAM FFST
-
**** Entry for VTAM Phantom FFST
-
ABND entry for abend SNAP routine
-
ACA1 or ACI1 entry for LU 6.2 authorized IO or LU 6.2 TPIO (Part 1)
-
ACP1 or ACR1 entry for LU 6.2 user post or RPL exit (Part 1)
-
ACRC entry for RPL6 return code
-
ACSN entry for APPC sense code
-
ACU1 entry for LU 6.2 user exit (Part 1)
-
ADE entry for device errors
-
AFSM entry for altering an FSM state
-
AI1 entry for authorized IO (Part 1)
-
ALSx entry for adjacent link station
-
AP entry for signals passed between components of the APPN CP
-
ARB entry for RTP LU-LU session data
-
ARBB entry for HPR trace option
-
ARBR entry for HPR trace option
-
AREL entry for abend RELSTORE
-
ARP or ARS entry for RTP session data reply (Part 1)
-
ARQ entry for RTP session data request (Part 1)
-
ASNB entry for ASSIGN_BUFFER requests
-
ATSK entry for attach of a subtask
-
ATTx entry for attention
-
BSPx entry for ADD, DELETE, and FIND macros
-
BSSx entry for Add, Delete, and Find
-
BSXx entry for Add, Delete, and Find
-
BTSK entry for begin a subtask
-
BUFF entry for 8K external buffer
-
C64Q entry for CDSG queue manager events (IUTC64QM macro) (Part 1)
-
CCI or CCO entry for SSCP (RUPE — Part 1)
-
CCI or CCO entry for SSCP (NCSPL — Part 1)
-
CCI or CCO entry for SSCP (not RUPE or NCSPL)
-
CCR entry for a communication channel operation
-
CCR2 entry for communication channel operation (Part 2)
-
CDHx entry for CIDCTL HOSTNODE Add, Change, Delete, and Find macros
-
CDNx entry for CIDCTL NEXTNODE Add, Delete, and Find macros
-
CDSQ entry for CDS queue manager event (IUTCDSQM macro)
-
CFAL entry for coupling facility IXLALTER service (Part 1)
-
CFCE entry for coupling facility request completion exit
-
CFCN entry for coupling facility connection service (Part 1)
-
CFDS entry for coupling facility disconnection service (Part 1)
-
CFEE entry for coupling facility connection event exit
-
CFER entry for coupling facility connection event exit response service
-
CFFC entry for coupling facility IXLFORCE service
-
CFLS entry for coupling facility IXLLIST service (Part 1)
-
CFNF entry for event notification
-
CFPG entry for IXLPURGE service
-
CFRB entry for structure rebuild service
-
CFTP entry for coupling facility TCP/IP interface requests
-
CFTX entry for coupling facility TCP/IP event exit invocation
-
CFUS entry for user sync point service
-
CFVC entry for IXLVECTR service
-
CHGO entry for CHANGE_OWNER requests
-
CI1 or CO1 trace entries
-
CMER entry for error in CMIP services (Part 1)
-
CNA entry for VCNSCMD issued by application
-
CNP1 or CNR1 entry for ECB posted or RPL exit dispatched (Part 1)
-
CNTP entry for buffer pool contraction
-
CONT entry for buffer pool contraction
-
CPx entry for requests/responses processed by the CP (Part 1)
-
CPPG or CPPT entry for CPPURGE or CPPOST event (Part 1)
-
CPRC entry for CPRC (Part 1)
-
CPWT entry for CPWAIT events (Part 1)
-
CPYB entry for COPY_DATA requests
-
CRx entry for ADD, DELETE, or FIND control block
-
CSx entry for resource state change
-
DAPT entry for HPR out of sequence or received segments queue DAPTR
-
DBx entry for DBDELETE, DBQUERY, and DBUPDATE
-
DCON entry for discarded container
-
DEVx entry for MPNCB device counter update
-
DLT entry for directory services locate (Part 1)
-
DRBx entry for invoking a RoCE doorbell operation
-
DRPx entry for DLURRTP macroinstruction invocation (Part 1)
-
DSCx entry for discarded TSCBs or TIPAC (Part 1)
-
DSP entry for PAB dispatch
-
DTSK entry for detach a subtask
-
ENFx entry for ENF exit
-
ENR entry for APPN resource registration processing
-
ERPx entry for error recovery procedures
-
ESC entry for the TPESC macro
-
ETSK entry for exit a subtask
-
EXIT entry for the TPEXIT macro
-
EXPN entry for buffer pool expansion
-
EXPP entry for buffer pool expansion
-
FBLK entry for FREEBLK macro (Part 1)
-
FIXB entry for FIX_BUFFER requests
-
FRBF entry for FREE_BUFFER requests
-
FRES entry for FREESTOR macro
-
GBLK entry for GETBLK macro (Part 1)
-
GCEL entry for Get Cell requests
-
GCEx entry for CSM storage movement
-
GETS entry for GETSTOR macro
-
GNAM entry for GNAME macro invoked (Part 1)
-
GTBF entry for GET_BUFFER requests
-
HCLK entry for HPR clock event
-
HCR entry for invoking a RoCE HCR operation (Part 1)
-
HIOx entry for Halt I/O
-
HLST entry for subtrace tree
-
HPR entry for HPRCTL macroinstruction (Part 1)
-
HPRT entry for HPR timer control macroinstruction
-
IDXx entry for identification exchange
-
INOP entry for the INOPINFO macro
-
INTx entry for channel interrupt
-
IO1 entry for TPIO request (Part 1)
-
IOSP entry for invoking a Peripheral Component Interconnect Express (PCIe) service (Part 1)
-
IPAD entry for Enterprise Extender Address Management
-
IPGN entry for host name
-
IPOG entry for getibmopt call
-
IPTC entry for altering an Enterprise Extender timer FSM state
-
IPTM entry for Enterprise Extender timer operation
-
IRBD entry for IRB dispatch
-
IRBX entry for IRB exit
-
IUTx entry for IUT processing (Part 1)
-
LCSx entry for LAN channel station error (Part 1)
-
LCSM entry for MACaddress for DATA SEND/RECEIVE
-
LDLC entry for invoking LDLC
-
LKEX entry for TPLOCK exclusive
-
LKSH entry for TPLOCK shared
-
LNKx entry
-
LOST entry for lost trace record
-
LSNA entry for local SNA record (Part 1)
-
MCO1 entry for MIBConnect (Part 1)
-
MDEL entry for MIBSendDeleteRegistration
-
MDIS entry for MIBDisconnect
-
MMG entry for memory management (Part 1)
-
MNPS entry for MNPS macro
-
MPDU entry for MPC PDU processing
-
MQRQ or MQRS entry for MIBSendRequest or MIBSendResponse
-
MREG entry for MIBSendRegister
-
MRG entry for updates to the VTAM topology agent (Part 1)
-
MRG2 entry for updates to the VTAM topology agent (Part 2)
-
MSG entry for message issued
-
MSGS entry for message sent (Part 1)
-
MT entry for module trace
-
MU1 entry for LU 6.2 message unit (Part 1)
-
NIPx entry for IP characteristics list add, delete, or find
-
NLPx entry for network layer packet (Part 1)
-
NRSP entry for negative response to PIU request (Part 1)
-
NSD entry for NSIND exit
-
ODPK entry for OSA-Express QDIO or HiperSockets packets (Part 1)
-
ODTE entry for outbound DLC timer events
-
ONLP entry for orphaned Network Layer Packet
-
OON entry for module trace
-
OOSQ entry for HPR out of sequence queue sequence numbers
-
OOX entry for module trace
-
OPER entry for operator command (Part 1)
-
ORMG entry for storage management
-
P64Q entry for 64-bit PLO queue manager events (IUTP64QM macro) (Part 1)
-
PAGB entry for PAGE_BUFFER requests
-
PCIx entry for program-controlled or suspend interrupt
-
PIU entry (Part 1)
-
PKI or PKO entry for TCP/IP packet sent or received
-
PLOQ entry for PLO queue manager event (IUTPLOQM macro)
-
POOF entry for freeing storage from GETBLK pool
-
POST entry for post waiting event
-
PROA or PROD entry for Profile Add or Delete
-
QAPL entry for OSA-Express QDIO or HiperSockets accelerator parameter list
-
QDIP entry for QDIO performance statistics
-
QREQ entry for queued REQSTORE
-
QRE2 entry for queued REQSTORE
-
QRYL entry for query language
-
QSRB entry for Queue Service Request Block (SRB) events
-
QSR2 entry for Queue Service Request Block (SRB) event (Part 2)
-
QUE entry for work element queued to PAB
-
QUEN entry for work element queued to any control block
-
RACR entry for LU 6.2 invocation of RACROUTE
-
RAPB entry for invoking a RoCE anchor pool operation (Part 1)
-
RCEx entry for RCE macroinstruction
-
RCM entry for RCM PAB dispatch
-
RCPx entry for invoking a RoCE verb (Part 1)
-
RCV entry for RCV PAB dispatch
-
RDSC entry for RUPE discard (Part 1)
-
RDVX entry for channel exit redrive
-
RE entry for RPL exit
-
RELS entry for release storage
-
REML entry for TPREMEL macro
-
REMQ entry for APPC
-
REQS entry for request storage (Part 1)
-
RESM entry for resume event processing
-
RIOx entry for Resume I/O (Part 1)
-
RPLx entry for invoking a RoCE Poll command (Part 1)
-
RPST entry for invoking a RoCE Post command (Part 1)
-
RQE entry for read queue exit
-
RSCx entry for RSCVSCAN macroinstruction (Part 1)
-
RSLK entry for invoking a RoCE shared lock operation
-
RTP entry for RTP PAB dispatch
-
RTPE entry for RTP error detection
-
RTPP entry for path switch processing
-
RTSx entry for route setup (Part 1)
-
RVM entry for RVM PAB dispatch
-
RXMT entry for adding PDU to RPNCB queue
-
SBAL entry for Storage Block Address Lists (Part 1)
-
SCHD entry for schedule of PAB dispatch
-
SIGA entry for Signal Adapter event
-
SIOx entry for Start I/O
-
SLSB entry for OSA-Express QDIO or HiperSockets Storage List Status Bytes (Part 1)
-
SPT entry for SPT macro invoked (Part 1)
-
SRBD entry for SRB dispatch
-
SRBX entry for SRB exit
-
SRTx entry for SRTADD, SRTCHG, SRTDEL, SRTFIND macros
-
SRT2 entry for the SRTADD macro
-
TGM entry for APPN TG management (Part 1)
-
TGVC entry for Transmission Group Vector (Part 1)
-
TOD entry for time of day
-
TOKx entry for token collection
-
TOPN entry for node modified (Part 1)
-
TOPT entry for TG modified (Part 1)
-
TREx entry for routing tree Build or Update
-
TRMR entry for mark record (Part 1)
-
TRNM entry for translate message (Part 1)
-
TRRT entry for subtrace tree
-
TSNS entry to trace sense codes
-
UE entry for USER exit (DFASY or RESP)
-
UE1 entry for USER exit (not DFASY or RESP, Part 1)
-
ULKA entry for release all locks
-
UNLK entry for release a lock
-
UP entry for user application program post
-
USI or USO entry for APPC commands
-
UVO or UVI entry for vector information
-
VCC1 entry for CNCB queued (Part 1)
-
VCDQ entry for work element dequeued
-
VHCR entry for invoking a RoCE VHCR operation (part 1)
-
VPST entry for VPOST macro
-
VRSM entry for resume after VWAIT
-
VTAL entry for allocate storage
-
VTFR entry for free storage
-
VWAI entry for VWAIT macro
-
WAIT entry for TPWAIT macro
-
XBA1 entry for extended buffer list (Part 1)
-
XBI1 entry for extended buffer list AMU, SPAC or TSCB
-
XCFC entry for save message (Part 1)
-
XCFJ entry for join XCF group (Part 1)
-
XCFL entry for leave XCF group (Part 1)
-
XCFM entry for XCF group member (Part 1)
-
XCFR entry for receive message (Part 1)
-
XCFS entry for send message (Part 1)
-
XCFX entry for VTAM XCF message exit or notify exit driven
-
XID entry for exchange ID (Part 1)
-
XPST entry for TPSWPST macro
-
Internal topology traces
-
First Failure Support Technology (FFST) probes
-
Communications storage manager (CSM) FFST probes
-
Architectural specifications
-
Accessibility
-
-
Bibliography
-
- Index for SNA Diagnosis Volume 2: FFST Dumps and the VIT