CEA messages
CEA messages use special definitions of the type codes that indicate
the severity of the detected error:
- I
- Information
- CEA0001I
CTRACE DEFINITION FAILED FOR COMMON EVENT ADAPTER. RC=rc, RSN=rsn - CEA0002I
COMPONENT TRACE PARMLIB OPTION optname IS NOT VALID. - CEA0003I
INCORRECT MODIFY COMMAND SYNTAX FOLLOWING D OR DISPLAY. TEXT SHOULD BE ONE OF: ",SUMMARY" ",CLIENT=clientname" ",CLIENTSUMMARY" ",EVENT=eventname" ",DIAG" ",PARMS" - CEA0004I
COMMON EVENT ADAPTERSTATUS: status CLIENTS: count INTERNAL: xcountEVENTS BY TYPE: #WTO: wtocnt #ENF: enfcnt #PGM: pgmcnt - CEA0005I
INCORRECT MODIFY COMMAND SYNTAX FOLLOWING F CEA TEXT SHOULD BE ONE OF: "DISPLAY" "DISPLAY," "DIAG," "MODE=" - CEA0006I
COMMAND NOT RECOGNIZED. - CEA0007I
INCORRECT MODIFY COMMAND SYNTAX FOLLOWING F CEA,D,DIAG, TEXT SHOULD BE ONE OF: "EXIT=*" "EXIT=exitname" - CEA0008I
INCORRECT MODIFY COMMAND SYNTAX FOLLOWING F CEA,DIAG. TEXT SHOULD BE: "F CEA,DIAG,REMOVE, CLIENT=xx, FORCE" OR: "F CEA,DIAG,REMOVE,CLIENT=xx,EVENT=xxxx"OR: "F CEA,DIAG,REXXDEBUG=xxxxxxxx"OR: "F CEA,DIAG,COMPTABLE" - CEA0009I
TERMINATING QUOTE NOT FOUND. - CEA0010I
REMOVE REQUEST SUCCESSFUL - CEA0011I
REMOVE REQUEST FAILED. DIAG1=rc DIAG2=rsn. VERIFY SPELLING OF CLIENT AND/OR EVENT NAME. - CEA0012I
INCORRECT MODIFY COMMAND SYNTAX FOLLOWING F CEA,MODE=, TEXT SHOULD BE ONE OF: "MIN" "FULL". - CEA0013I
MODE REQUEST SUCCESSFUL. - CEA0014I
MODE REQUEST FAILED. DIAG1=rc DIAG2=rsn - CEA0015I
COMMON EVENT ADAPTER ALREADY PROCESSING IN REQUESTED MODE. - CEA0016I
CEA REXX DEBUG TRACE IS [OFF|ON] DIAG="nnnnnnnn" - CEA0017I
THE VALUE ‘NNNNNNNN’ IS INCORRECT. POSSIBLE VALUES ARE “ON”, “OFF”, OR A VALID HEXADECIMAL VALUE. - CEA0018I
COMPONENT TABLE RELOAD SUCCESSFUL. - CEA0019I
COMPONENT TABLE LOAD FAILED. RC=XXXXXXXX RSN=YYYYZZZZ. - CEA0020I
DROPIPCS REQUEST SUCCESSFUL. - CEA0021I
DROPIPCS REQUEST FAILED. DIAG1=XXXXXXXX DIAG2=XXXXXXXX. - CEA0022I
traceoptn IS NOT A VALID TRACE OPTION FOR SYSCEA. ALLOWABLE OPTIONS ARE ALL, ERROR, CNTLFLOW, EVNTFLOW, JOBSFLOW, AND PDWBFLOW. - CEA0023I
COMMON EVENT ADAPTERSTATUS: status CLIENTS: count INTERNAL: xcountCEA = membersSNAPSHOT = Y|NHLQLONG = hlqlong HLQ = hlqBRANCH = bbb COUNTRYCODE = cccCAPTURE RANGE FOR SLIP DUMPS:LOGREC = HH:MM:SS LOGRECSUMMARY=HH:MM:SS OPERLOG = HH:MM:SSCAPTURE RANGE FOR ABEND DUMPS:LOGREC = HH:MM:SS LOGRECSUMMARY=HH:MM:SSOPERLOG = HH:MM:SSCAPTURE RANGE FOR CONSOLE DUMPS:LOGREC = HH:MM:SS LOGRECSUMMARY=HH:MM:SSOPERLOG = HH:MM:SSSMS STORAGE CLASS = smsclass VOLSER, 1-4 = volumexx, volumexx, volumexx, volumexx,VOLSER, 5-8 = volumexx, volumexx, volumexx, volumexx - CEA0101I
COMMON EVENT ADAPTER IS ALREADY ACTIVE - CEA0102I
COMMON EVENT ADAPTER INITIALIZATION COMPLETE. - CEA0103I
COMMON EVENT ADAPTER HAS ENDED. - CEA0104I
ASCRE TO COMMON EVENT ADAPTER FAILED. RC=rc, RSN=rsn - CEA0105I
COMMON EVENT ADAPTER IS RUNNING IN MINIMUM MODE. UNIX SYSTEM SERVICE syservname ENDED WITH RETURN CODE return_code REASON CODE reason_code. - CEA0106I
COMMON EVENT ADAPTER IS RUNNING IN MINIMUM MODE. OMVS IS NOT ACTIVE. - CEA0107I
COMMON EVENT ADAPTER IS RUNNING IN FULL FUNCTION MODE. - CEA0108I
COMMON EVENT ADAPTER IS NOT ACCEPTING subscriptions THE MAXIMUM NUMBER HAS BEEN REACHED. - CEA0109I
STOP COMMON EVENT ADAPTER COMMAND ACCEPTED - CEA0110I
COMMON EVENT ADAPTER MODIFY/STOP COMMAND FAILED. RETRY. - CEA0111I
COMMON EVENT ADAPTER IS RUNNING IN MINIMUM MODE. UNIX SYSTEM SERVICES ARE NOT AVAILABLE. - CEA0112I
COMMON EVENT ADAPTER IS RUNNING IN MINIMUM MODE. MODE SET BY THE SYSTEM OPERATOR. - CEA0113I
COMMON EVENT ADAPTER IS NOT ACCEPTING CLIENT CONNECTIONS. status. - CEA0114I
COMMON EVENT ADAPTER IS NOW ACCEPTING requests - CEA0115I
USERID clientuserid ATTEMPTED TO ACCESS A RESOURCE THAT IS NOT DEFINED TO THE SECURITY PRODUCT. resource - CEA0116I
COMMON EVENT ADAPTER (CEA) MUST BE STARTED AS A STARTED TASK. IT CANNOT BE STARTED FROM A BATCH JOB (jobname) - CEA0500I
ERROR(S) FOUND PROCESSING PARMLIB MEMBER=member textstring describing failure - CEA0501I
FROM member: keyword option - CEA0502I
CEA PARMLIB PROCESSING COMPLETE - CEA0600I
THE z/OS DIAGNOSTIC SNAPSHOT OPTION FAILED. text - CEA0601I
THE Z/OS DIAGNOSTIC SNAPSHOT OPTION FAILED FOR LOGREC SUMMARY SNAPSHOT TYPE: LOGREC SUMMARY RETURN CODE = xxxxxxxx REASON CODE = yyyyyyyy SOURCE NAME: Name of SNAPSHOT source, OPERLOG or name of the logstream TARGET NAME: data set name of SNAPSHOT target - CEA0602I
THE Z/OS DIAGNOSTIC SNAPSHOT OPTION FAILED. SNAPSHOT TYPE: stype DIAG1 = xxxxxxxx DIAG2 = yyyyyyyy DIAG3 = zzzzzzzz SOURCE NAME: Name of SNAPSHOT source TARGET NAME: Data set name of SNAPSHOT target DIAGNOSTIC MESSAGES: Message returned from service - CEA0603I
The z/OS Diagnostic Snapshot option failed. z/OS component CEA is unavailable for processing this request. Diagnostic data will be missing for the following incident with: DUMP TITLE: dump-title DATE AND TIME: date-time DUMP DATA SET NAME: data-set-name REASON: reason-text - CEA0701I
command‐name version version starting. - CEA0702I
command‐name ended. - CEA0703I
command‐name completed with errors. - CEA0704I
Version version‐number [version‐id]. - CEA0710I
Invocation option ‐ &sdq;option&sdq; is not valid. - CEA0711E
Parameter missing for invocation option ‐&sdq;option&sdq;. - CEA0712E
Required value missing for option &sdq;option&sdq;. - CEA0713E
Unrecognized option &sdq;option&sdq; not processed. - CEA0714E
Unexpected option &sdq;option&sdq; not processed. - CEA0715E
Option &sdq;option‐1&sdq; is required when option &sdq;option‐2&sdq; is specified. - CEA0717E
Option &sdq;option&sdq; value &sdq;value&sdq; is not valid. - CEA0718E
Option &sdq;option&sdq; value &sdq;value&sdq; is too small, the minimum value allowed is minimum‐value. - CEA0719E
Option &sdq;option&sdq; value &sdq;value&sdq; is too large, the maximum value allowed is maximum‐value. - CEA0750I
The delete incidents command has completed. - CEA0751E
Function function‐name failed with CEA return code return‐code, reason code 0x<reaon-code>, diagnostic words [0xword1, 0xword2, 0xword3, 0xword4]. - CEA0752E
Additional information follows: info‐text. - CEA0760I
Deleting incidents with retention period number days. - CEA0761I
Dump data sets associated with incidents will be deleted. - CEA0762I
Dump data sets associated with incidents will be kept. - CEA0763I
Incidents to be deleted: delete‐count. Total defined: total‐count (active‐count). - CEA0764I
Incidents not deleted due to preview mode. - CEA0766I
Obtaining list of incidents. - CEA0780E
Request not completed, the CEA address space is not active. - CEA0781E
Request not completed, not authorized to function‐name, return code return‐code, reason code 0x<reaon-code>, diagnostic words [0xword1, 0xword2, 0xword3, 0xword4]. - CEA0782I
The sysplex dump directory is empty. - CEA0783E
Request not completed, the SYSREXX service is not active. - CEA0784I
No incidents match the filtering criteria. - CEA0785E
Request not completed, error occurred running SYSREXX exec, return code return‐code, reason code 0x<reaon-code>, diagnostic words [0xword2, 0xword2, 0xword3, 0xword4]. - CEA0786E
Request not completed, unable to determine time of day: clock stopped or in error. - CEA0787E
Request not completed, unable to obtain number bytes of storage. - CEA0797E
Message retrieval failed for message message‐id in set set‐id in catalog &sdq;catalog‐name&sdq;, catgets error: error‐text. - CEA0798E
Message 0xmessage‐id in set set‐id not found in catalog &sdq;catalog‐name&sdq;. - CEA0799E
Message catalog &sdq;catalog‐name&sdq; failed to open, check NLSPATH: error‐text.