CPO messages
The Capacity Provisioning programs may issue information messages, warnings or errors if such situations are detected. These programs are the Control Center and the Provisioning Manager. The Provisioning Manager also issues messages in response to Provisioning Manager commands and in situations where an operator should take an action, for example when the Provisioning Manager is running in confirmation mode and the operator needs to confirm a provisioning action that has been detected.
Capacity Provisioning message identifiers have the form CPOnnnns where nnnn is the
message number and s specifies the severity.
The severity can be one of the following:
- Severity
- Description
- I
- Informational messages. Such messages report information and do not require any action.
- W
- Warning messages. Such messages are issued in situations that may prevent successful completion of the processing. You should check if you need to perform an action to resolve the situation.
- E
- Error messages. Such messages are issued in situations where a program operation is unsuccessful. You must perform some action to recover from the situation.
- CPO1001I
Rule name successfully enabled - CPO1002I
Provisioning condition condition in rule rule successfully enabled - CPO1003I
Rule name successfully disabled - CPO1004I
Provisioning condition condition in rule rule successfully disabled - CPO1005I
Policy report generated at time - CPO1006W
Command "input" not recognized - CPO1007I
Stop command for the Provisioning Manager accepted - CPO1008I
Domain report generated at time - CPO1009I
Processing mode successfully changed to mode - CPO1010I
Configuration report generated at time - CPO1011I
CPC cpc in current configuration successfully enabled - CPO1012I
CPC cpc in current configuration successfully disabled - CPO1013I
System system in sysplex sysplex of current configuration successfully enabled - CPO1014I
System system in sysplex sysplex of current configuration successfully disabled - CPO1017E
Required object missing for command command - CPO1018I
Current policy successfully reset - CPO1019I
Current configuration successfully reset - CPO1020I
Policy successfully changed to name - CPO1023I
Temporary upgrade for CPC name to model model successfully initiated - CPO1024E
Object object not supported with verb command - CPO1025I
Temporary downgrade for CPC name to model model successfully initiated - CPO1026I
Activation level change to number zAAPs successfully initiated for CPC name - CPO1027I
Activation level change to number zIIPs successfully initiated for CPC name - CPO1028I
Activation level change to number zAAPs successfully initiated for CPC name - CPO1029I
Activation level change to number zIIPs successfully initiated for CPC name - CPO1030I
Report successfully written to file filename - CPO1031I
Logging successfully activated for log name - CPO1032I
Logging successfully activated - CPO1033E
Unknown log name - CPO1034I
Logging successfully deactivated for log name - CPO1035I
Logging successfully deactivated - CPO1036E
Unknown log name - CPO1037E
Unknown log name - CPO1038E
Cannot open destination file filename for writing log information - CPO1039E
Error writing to file filename. The reason is "text" - CPO1040I
Log name successfully written to file filename - CPO1041I
Domain configuration name successfully activated - CPO1042I
Activity report generated at time - CPO1043I
Content of policy file name successfully retrieved - CPO1044I
Content of domain configuration file name successfully retrieved - CPO1045I
Content for policy name successfully installed - CPO1046I
Content for domain configuration file name successfully installed - CPO1047I
Workload report generated at time - CPO1048I
Policy list generated at time - CPO1049I
Domain configuration list generated at time - CPO1050I
Trace report generated at time - CPO1060I
The global trace level has been set to level - CPO1061I
The trace level for component component has been set to level - CPO1062E
Unknown trace level level - CPO1063E
Unknown trace component component - CPO1064I
Activation level change to number IFLs successfully initiated for CPC name - CPO1065I
Activation level change to number ICFs successfully initiated for CPC name - CPO1066I
Activation level change to number SAPs successfully initiated for CPC name - CPO1067I
Activation level change to number IFLs successfully initiated for CPC name - CPO1068I
Activation level change to number ICFs successfully initiated for CPC name - CPO1069I
Activation level change to number SAPs successfully initiated for CPC name - CPO1070I
The trace configuration has been reset - CPO1071I
CPC list generated at time - CPO1072I
Record list for CPC name generated at time - CPO1080E
Error creating trace file filename. Error is "error" - CPO1081E
Error writing to trace file filename. Error is "error" - CPO1082W
The directory directory for writing trace information does not exist - CPO1083W
The directory directory for writing trace information is not set up correctly or trace directory is full - CPO1084E
Error writing trace information - CPO1085I
Continue writing trace information - CPO1086E
Could not get lock for trace file prefix trace file prefix - CPO1087E
Error creating trace lock file filename. Error is "error" - CPO1088I
Dump manager command for dump type type successfully performed - CPO1090I
Writing log name successfully initiated - CPO1091I
Log status report generated at time - CPO1092I
Static power save mode for CPC name successfully enabled - CPO1093I
Static power save mode for CPC name successfully disabled - CPO1094I
Health status report generated at time - CPO1095I
Defined capacity report generated at time - CPO1096I
Group capacity report generated at time - CPO1103E
Parameter name is duplicate - CPO1104E
Unknown parameter name - CPO1105E
Syntax error. The command you passed ends with a comma (,) - CPO1106E
Required parameter name is missing - CPO1107E
Unknown command "text" - CPO1108E
Command is empty - CPO1109E
Syntax error in command; expected token but found string - CPO1110E
Syntax error. The command must not end with keyword parameter - CPO1111E
Syntax error. Parameter parameter is missing a value - CPO1114E
Unexpected end of string. Start position offset after token - CPO1115E
Internal error - CPO1116E
Internal error - CPO1118W
Required parameter missing - CPO1119E
Too many parameters specified - CPO1120W
Required parameter missing - CPO1121E
Too many parameters specified - CPO1122E
Cannot open report file "filename" - CPO1126E
Unexpected end of comment. Start position offset after token - CPO1127E
Policy name not found - CPO1128I
Policy not changed - CPO1129E
I/O error reading policy name - CPO1130E
Processing mode mode not supported - CPO1131E
Stop mode mode not supported - CPO1132E
Rule name is not part of active policy - CPO1133E
Provisioning condition condition is not part of rule rule - CPO1134E
System system in sysplex sysplex is not part of the current configuration - CPO1135E
CPC name is not part of the current configuration - CPO1138E
The specified number "value" is not in a correct format - CPO1139E
The specified amount of number is out of range - CPO1140E
The CPC name is not in the correct state for the operation - CPO1141E
Insufficient processors. Available spares are amount - CPO1142E
Insufficient general purpose capacity. The residual capacity is amount - CPO1143W
Required parameter missing - CPO1144E
Too many parameters specified - CPO1146E
Insufficient zAAP capacity. The residual capacity is amount - CPO1147E
Insufficient zIIP capacity. The residual capacity is amount - CPO1148E
Target number of zAAPs (target number) is not below current number of active zAAPs (current number) at CPC name - CPO1149E
Target number of zIIPs (target number) is not below current number of active zIIPs (current number) at CPC name - CPO1150E
On/Off CoD record id for CPC name is expired - CPO1151E
On/Off CoD record id for CPC name currently active for TEST - CPO1152E
Another On/Off CoD record than id for CPC name is currently active - CPO1153E
On/Off CoD record id for CPC name has no activations left - CPO1154E
CPC name is not configured to allow capacity changes - CPO1155E
The specified value for the FROM parameter (data) is incorrect - CPO1156E
The specified value for the TO parameter (data) is incorrect - CPO1157E
FROM date from date is after TO date to date - CPO1158E
Target model model for CPC name not possible - CPO1159E
Activation with less general purpose capacity not allowed - CPO1160E
Activation with less zAAP capacity not allowed - CPO1161E
Activation with less zIIP capacity not allowed - CPO1162E
Deactivation with more general purpose capacity not allowed - CPO1163E
Insufficient processors. Available spares are amount - CPO1164E
Required parameter missing - CPO1165E
Too many parameters specified - CPO1166E
Target model name not possible with current On/Off CoD record - CPO1167E
Target model name has less capacity than is currently active - CPO1168E
Target model name not possible with current On/Off CoD record - CPO1169E
Target model name has more capacity than is currently active - CPO1170W
Target model model already active at CPC name - CPO1171E
Target number number is not above current number of active zAAPs for CPC name - CPO1172E
Target number number is not above current number of active zIIPs for CPC name - CPO1173E
Requested number of zAAPs (number) exceeds limit limit - CPO1174E
Requested number of zIIPs (number) exceeds limit limit - CPO1175E
Deactivation of zAAP capacity not allowed. Requested delta (requested number) is above current activation level (current number) - CPO1176E
Deactivation of zIIP capacity not allowed. Requested delta (requested number) is above current activation level (current number) - CPO1177E
Activation with fewer general purpose processors not allowed - CPO1178E
Deactivation with more general purpose processors not allowed - CPO1180E
I/O error "error" reading policy list - CPO1181E
I/O error "error" reading domain configuration list - CPO1182E
CPC name is not in correct state for this operation - CPO1183E
CPC name is not in correct state for this operation - CPO1184E
CPC name does not have a valid On/Off CoD record - CPO1185E
CPC name does not have a valid On/Off CoD record for use by the Provisioning Manager - CPO1186E
Dump type type not supported - CPO1187E
Writing log information for log name is not active - CPO1188W
No information to write to log type - CPO1189E
Report type type not supported - CPO1190E
The CPC name is not in the correct state for the power save operation - CPO1191E
Static power save mode for CPC name not supported - CPO1192W
Static power save mode for CPC name already enabled - CPO1193W
Static power save mode for CPC name already disabled - CPO1194E
Report type type not supported - CPO1195E
CPC name unknown - CPO1201E
Duplicate element name - CPO1204E
I/O error writing to file "filename". Error is "error" - CPO1205E
I/O error reading file "filename". Error is "error" - CPO1206E
Policy name does not exist - CPO1207E
Incorrect policy name in policy file filename - CPO1208E
Incorrect domain configuration name in domain configuration file filename - CPO1209E
Parser initialization error: error - CPO1210E
Policy is not correct - CPO1211E
Domain configuration file name does not exist - CPO1212E
Domain configuration name is for domain domain name 1 (must be domain name 2) - CPO1230E
I/O error reading file "filename". Error is "error" - CPO1231E
Domain configuration file "filename" not found - CPO1232E
Domain configuration is not correct - CPO1250W
Required parameter missing - CPO1251W
Required parameter missing - CPO1252E
The specified number "value" for parameter ZAAP is not in a correct format - CPO1253E
The specified number value for parameter ZAAP is out of range - CPO1254E
The specified number "value" for parameter ZIIP is not in a correct format - CPO1255E
The specified number value for parameter ZIIP is out of range - CPO1256E
The specified number "value" for parameter KEEPTIME is not in a correct format - CPO1257E
The specified number of value for parameter KEEPTIME is out of range - CPO1258I
Manage resource for CPC name successfully initiated - CPO1260E
Target number number is not above current number of active IFLs for CPC name - CPO1261E
Target number number is not above current number of active ICFs for CPC name - CPO1262E
Target number number is not above current number of active SAPs for CPC name - CPO1263E
Insufficient IFL capacity. The residual capacity is amount - CPO1264E
Insufficient ICF capacity. The residual capacity is amount - CPO1265E
Insufficient SAP capacity. The residual capacity is amount - CPO1266E
Requested number of IFLs (number) exceeds limit limit - CPO1267E
Requested number of ICFs (number) exceeds limit limit - CPO1268E
Requested number of SAPs (number) exceeds limit limit - CPO1269E
Target number of IFLs (target number) is not below current number of active IFLs (current number) at CPC name - CPO1270E
Target number of ICFs (target number) is not below current number of active ICFs (current number) at CPC name - CPO1271E
Target number of SAPs (target number) is not below current number of active SAPs (current number) at CPC name - CPO1272E
Deactivation of IFL capacity not allowed. Requested delta (requested number) is above current activation level (current number) - CPO1273E
Deactivation of ICF capacity not allowed. Requested delta (requested number) is above current activation level (current number) - CPO1274E
Deactivation of SAP capacity not allowed. Requested delta (requested number) is above current activation level (current number) - CPO1280I
Defined capacity for system system name in sysplex sysplex name increased to number MSU - CPO1281E
The specified number "value" for parameter MSU is not in a correct format - CPO1282E
The specified number value for parameter MSU is out of range - CPO1283E
System system name and sysplex sysplex name is not unique - CPO1284E
System system name and sysplex sysplex name is not unique - CPO1285E
System system name and sysplex sysplex name not found on a managed CPC - CPO1286E
LPAR LPAR name not found on CPC CPC name - CPO1287E
Defined Capacity for LPAR LPAR name on CPC CPC name is turned off - CPO1288E
Specified new defined capacity of new value MSU for LPAR LPAR name on CPC CPC name is not above the current defined capacity of current value MSU - CPO1289I
Defined capacity for LPAR LPAR name on CPC CPC name increased to value MSU - CPO1290I
Group capacity for system system name in sysplex sysplex name increased to value MSU - CPO1291E
LPAR LPAR name on CPC CPC name running system system name in sysplex sysplex name is not connected to a capacity group - CPO1292E
No LPAR found that is connected to capacity group group name on CPC CPC name - CPO1293E
LPAR LPAR name on CPC CPC name is not connected to group group name - CPO1294E
Group Capacity for Group group name on CPC CPC name is turned off - CPO1295E
Specified new capacity of new value MSU for capacity group group name on CPC CPC name is not above the current capacity of current value MSU - CPO1296E
Error changing group capacity for group group name on CPC CPC name - CPO1297E
Error changing defined capacity for LPAR LPAR name on CPC CPC name - CPO1298I
Group capacity for group group name on CPC CPC name increased to value MSU - CPO1299E
Too many parameters specified - CPO1300E
Required parameter missing - CPO1301E
Too many parameters specified - CPO1302E
Required parameter missing - CPO1303E
Group capacity changes not supported on CPC name - CPO1304E
Specified new capacity of new value MSU for capacity group group name on CPC CPC name is not below the current capacity of current value MSU - CPO1305E
Turning off defined capacity is not allowed - CPO1306E
Specified new defined capacity of new value MSU for LPAR LPAR name on CPC CPC name is not below the current defined capacity of current value MSU - CPO1307E
Not authorized to change group capacity for LPAR LPAR name on CPC CPC name - CPO1308E
Error changing defined capacity for LPAR LPAR name on CPC CPC name. Return information is index, key, actual, expected, communication error, text - CPO1309E
Not authorized to change defined capacity for LPAR LPAR name on CPC CPC name - CPO1310I
Defined capacity for LPAR LPAR name on CPC CPC name decreased to value MSU - CPO1311I
Defined capacity for system system name in sysplex sysplex name decreased to value MSU - CPO1312I
Group capacity for group group name on CPC CPC name decreased to value MSU - CPO1313I
Group capacity for system system name in sysplex sysplex name decreased to value MSU - CPO1314E
Error changing group capacity for group group name on CPC CPC name. Return information is index, key, actual, expected, communication error, text - CPO1401E
Cannot read from command input device: error information - CPO1402E
Unexpected error during command processing - CPO1403E
Unexpected error during console request processing - CPO2001I
Provisioning Manager starting at time for Domain domain with policy policy and mode mode - CPO2002E
The PARM member is missing - CPO2003E
I/O Error reading PARM member - CPO2004E
The PARM member contains the number "value" that is not valid - CPO2005E
The value for configuration key name is out of range - CPO2006E
The configuration contains inconsistent information. The value value for key key 1 requires also a value for key key 2 - CPO2007E
The number of start parameters is incorrect. Found found number but required are required number - CPO2008E
The configuration file is missing a value for key name - CPO2009E
Current domain current name does not match restart information domain name restart name - CPO2010W
The PARM member contains incorrect information. The key key is not supported - CPO2011I
Provisioning Manager terminates due to errors - CPO2012W
Error initializing CIM provider interface: error - CPO2013E
SNMP Java API not found, class class - CPO2014E
CIM Client not found, class class - CPO2015I
Provisioning Manager successfully initialized. Policy is policy name, Configuration is configuration name, and Processing Mode is MANUAL - CPO2016I
Provisioning Manager successfully initialized. Policy is policy name, Configuration is configuration name, and Processing Mode is ANALYSIS - CPO2017I
Provisioning Manager successfully initialized. Policy is policy name, Configuration is configuration name, and Processing Mode is CONFIRMATION - CPO2018I
Provisioning Manager successfully initialized. Policy is policy name, Configuration is configuration name, and Processing Mode is AUTONOMIC - CPO2019E
CIM Client not found, class class - CPO2020I
Register with ARM using element type type and element name name was successful - CPO2021W
Registration with ARM using element type type and element name name not successful - CPO2022E
ARM registration failed with return code return code reason reason code - CPO2023E
ARM ready failed with return code return code reason reason code - CPO2024E
ARM de-registration failed with return code return code reason reason code - CPO2025E
The PARM member contains incorrect information. The value value for key key is not valid - CPO2026W
The PARM member contains inconsistent information. The key synonym is a synonym for key key - CPO2027E
PassTicket generation services not found. Class class - CPO2028E
The value number 1 for configuration key name 1 is not higher than the value number 2 for configuration key name 2 - CPO2030I
Log information written to file name - CPO2035E
Unable to setup the CIM provider query communication with security group group - CPO2036E
Unable to setup the CIM provider control communication with security group group - CPO2050E
Unable to load Java runtime library - CPO2051E
Unable to locate JNI functions in loaded runtime library - CPO2052E
Failed to create Java VM - CPO2053E
Could not load invocation class - CPO2054E
Could not find main method - CPO2055E
Could not create string for argument array - CPO2056E
Could not create argument array - CPO2057E
Could not build argument string - CPO2070W
Following message may be truncated or missing: text - CPO2101E
I/O error "error" reading restart data from file name - CPO2102E
The restart information found in name is incorrect - CPO2103E
The restart information found for element name is incorrect - CPO2104W
The restart information cannot be written. Error: error - CPO2105E
The restart information cannot be written. Error: error - CPO2106E
The log file name cannot be opened. Error: error - CPO2110E
An internal error occurred for component - CPO2111E
An internal error occurred during HMC or SE observation - CPO2112E
An internal error occurred during topology observation on HMC or SE - CPO2113E
An internal error occurred during policy processing - CPO2115E
Provisioning Manager ends due to environmental problems - CPO2120E
The specified repository location path is not a directory - CPO2121E
The specified repository location location may not be a PDS or PDSE - CPO2122E
A directory entry was found with incorrect data - CPO2130I
The Provisioning Manager state is now GOOD - CPO2131W
The Provisioning Manager is in a WARNING state - CPO2132E
The Provisioning Manager is in an ERROR state - CPO2201E
Policy name missing - CPO2202E
Policy name too short - CPO2203E
Policy name "policy name" longer than 8 characters - CPO2204E
Policy name "name" has incorrect starting character - CPO2205E
Policy name "name" contains incorrect character - CPO2206E
Rule set name missing - CPO2207E
Rule set name too short - CPO2208E
Rule set name "name" longer than 12 characters - CPO2209E
Rule set name "name" has incorrect starting character - CPO2210E
Rule set name "name" contains incorrect character - CPO2211E
Rule name missing - CPO2212E
Rule name too short - CPO2213E
Rule name "name" longer than 12 characters - CPO2214E
Rule name "name" has incorrect starting character - CPO2215E
Rule name "name" contains incorrect character - CPO2216E
Provisioning condition name missing - CPO2217E
Provisioning condition name too short - CPO2218E
Provisioning condition name "name" longer than 12 characters - CPO2219E
Provisioning condition name "name" has incorrect starting character - CPO2220E
Provisioning condition name "name" contains incorrect character - CPO2221E
Time condition name missing - CPO2222E
Time condition name too short - CPO2223E
Time condition name "name" longer than 12 characters - CPO2224E
Time condition name "name" has incorrect starting character - CPO2225E
Time condition name "name" contains incorrect character - CPO2226E
Workload condition name missing - CPO2227E
Workload condition name too short - CPO2228E
Workload condition name "name" longer than 12 characters - CPO2229E
Workload condition name "name" has incorrect starting character - CPO2230E
Workload condition name "name" contains incorrect character - CPO2231E
Domain name missing - CPO2232E
Domain name too short - CPO2233E
Domain name "name" longer than 8 characters - CPO2234E
Domain name "name" has incorrect starting character - CPO2235E
Domain name "name" contains incorrect character - CPO2236E
CPC name missing - CPO2237E
CPC name too short - CPO2238E
CPC name "name" longer than 8 characters - CPO2240E
CPC name "name" contains incorrect character - CPO2241E
System name missing - CPO2242E
System name too short - CPO2243E
System name "name" longer than 8 characters - CPO2245E
System name "name" contains incorrect character - CPO2246E
Sysplex name missing - CPO2247E
Sysplex name too short - CPO2248E
Sysplex name "name" longer than 8 characters - CPO2250E
Sysplex name "name" contains incorrect character - CPO2251E
WLM policy name missing - CPO2252E
WLM policy name too short - CPO2253E
WLM policy name "name" longer than 8 characters - CPO2254E
WLM policy name "name" has incorrect starting character - CPO2255E
WLM policy name "name" contains incorrect character - CPO2256E
Service definition name missing - CPO2257E
Service definition name too short - CPO2258E
Service definition name "name" longer than 8 characters - CPO2259E
Service definition name "name" has incorrect starting character - CPO2260E
Service definition name "name" contains incorrect character - CPO2261E
Service class name missing - CPO2262E
Service class name too short - CPO2263E
Service class name "name" longer than 8 characters - CPO2264E
Service class name "name" has incorrect starting character - CPO2265E
Service class name "name" contains incorrect character - CPO2266E
Domain configuration name missing - CPO2267E
Domain configuration name too short - CPO2268E
Domain configuration name "name" is longer than 8 characters - CPO2269E
Domain configuration name "name" has incorrect starting character - CPO2270E
Domain configuration name "name" contains incorrect character - CPO2271E
Provisioning Manager connection name missing - CPO2272E
Provisioning Manager connection name too short - CPO2273E
Provisioning Manager connection name "name" longer than 8 characters - CPO2274E
Provisioning Manager connection name "name" has incorrect starting character - CPO2275E
Provisioning Manager connection name "name" contains incorrect character - CPO2276E
Record ID missing - CPO2277E
Record ID too short - CPO2278E
Record ID "name" longer than 8 characters - CPO2279E
Record ID "name" has incorrect starting character - CPO2280E
Record ID "name" contains incorrect character - CPO2281E
Description missing - CPO2282E
Description too short - CPO2283E
Description "text" longer than 128 characters - CPO2284E
Description "text" has incorrect starting character - CPO2285E
Description "text" contains incorrect character - CPO2290E
Service class "name" not supported - CPO2291E
Capacity group name missing - CPO2292E
Capacity group name too short - CPO2293E
Capacity group name "name" is longer than 8 characters - CPO2294E
Capacity group name "name" contains incorrect character - CPO2500W
MISSING APF AUTHORIZATION. EXECUTION MAY FAIL - CPO2501E
SEVERE ERROR - DUMP REQUESTED - CPO2502E
BYPASSING DUMP IN UNAUTHORIZED ENVIRONMENT - CPO2503E
MISSING APF AUTHORIZATION - CPO2504E
FUNCTION MUST BE EXECUTED AS STARTED TASK - CPO2505E
FUNCTION NOT AVAILABLE - CPO3001E
Unable to connect to HMC or SE at address "address" - CPO3002W
Connection problem for connection to HMC or SE at address "address" - CPO3003E
Topology file not found at "path" - CPO3004E
Hardware configuration file for "id" not found at "path" - CPO3005E
HMC or SE not found at address "address" - CPO3006E
HMC or SE initialization error at address address - CPO3007E
HMC or SE initialization timeout at address "address" - CPO3008W
Mandatory information for a CPC not found - CPO3009I
Problem retrieving information for CPC name - CPO3010W
Hardware for CPC name not at correct level - CPO3011W
On/Off CoD record "id" not found at CPC name - CPO3012W
Activation for CPC name currently not allowed - CPO3013W
Deactivation for CPC name currently not allowed - CPO3014W
Record ID id for CPC name has an unsupported record type - CPO3015W
Connection problem for connection to HMC or SE at address address. Error is error - CPO3016W
SNMP error for request to HMC or SE at address address. Error is error - CPO3017W
Information about CPC name currently not available - CPO3018W
Command failed for HMC or SE at address address. Community community name probably not authorized - CPO3019I
Information for CPC name available - CPO3020I
Information for CPC name now accessible again - CPO3021W
No supported On/Off CoD record for CPC name found - CPO3022W
Record ID id for CPC name not available - CPO3024I
Static power save mode has been disabled for CPC name - CPO3025W
Static power save mode has been enabled for CPC name. No temporary capacity will be activated while power save mode is enabled - CPO3026I
Enabling of static power save mode now allowed for CPC name - CPO3027I
Defined capacity information for CPC name is available - CPO3030I
Command completed successfully for CPC name - CPO3031W
Unsuccessful command completion for CPC name. Reason number - CPO3032I
Command completed successfully for CPC name - CPO3033W
Unsuccessful command completion at CPC name. Reason number - CPO3034W
Priority request pending for CPC name - CPO3036I
Power save command completed successfully for CPC name - CPO3037W
Unsuccessful power save command completion for CPC name. Reason number - CPO3040W
Connection problem for getting the list of defined CPCs - CPO3041W
Connection problem for getting the list of defined CPCs. Return information is rc, index, key, actual, expected, communication error - CPO3042E
Error reading CPC information for CPC with address address - CPO3043E
Reading CPC information for CPC with address address failed. Return information is rc, index, key, actual, expected, communication error - CPO3044W
Mandatory information for CPC with address address not found - CPO3045E
Error connecting to CPC with address address - CPO3046E
Error connecting to CPC with address address. Return information is rc, index, key, actual, expected, communication error - CPO3047E
Error registering for CPC events for CPC name - CPO3048E
Error registering for CPC events for CPC name. Return information is rc, index, key, actual, expected, communication error - CPO3050E
Error on activation command: error - CPO3051E
Error on deactivation command: error - CPO3052E
Cannot connect to the hardware because BCPii is not available - CPO3053E
Not authorized to connect to CPC name due to an invalid community name - CPO3054E
Not authorized to connect to CPC name. Return information is index, key, actual, expected, communication error, 'text' - CPO3055E
Cannot connect to CPC name because BCPii is not available - CPO3056E
Error on power save control command: error - CPO3060W
Domain name is configured to use SNMP - CPO3800I
The system at address address is available - CPO3801W
The system at address address is temporarily unavailable - CPO3802W
The system at address address is unavailable - CPO3805W
The system at address address could not be identified - CPO3806I
The system at address address is name in sysplex sysplex name - CPO3807W
The system at address address is not the defined system name in sysplex sysplex name - CPO3808W
The version of the system at address address is not available - CPO3809W
The version version of the system at address address is not supported - CPO3810W
The CPC the system at address address is running on is not available - CPO3811W
Cannot correlate system at address address to a CPC with serial number number - CPO3812W
The CPC name the system at address address is running on is not part of the domain - CPO3813I
The system at address address is running on CPC name - CPO3815W
Insufficient information for retrieving metric values from the system at address address - CPO3816W
Missing information about the WLM service definition for the system at address address - CPO3817W
Missing information about WLM service class periods for the system at address address - CPO3818I
The WLM service definition for the system at address address has been changed. Name is name, policy policy activated at policy activation time - CPO3819W
Metric values not available for system at address - CPO3820W
Long metrics retrieval interval for system at address - CPO3829E
An internal error occurred for observer of system at address - CPO3830W
The metric name is not defined to CIM server at address address - CPO3831E
Error retrieving metric definitions from CIM server at address address - CPO3833W
No instances of class name retrieved from CIM server at address address - CPO3834E
Error retrieving instances of class name from CIM server at address address - CPO3836W
No metric values for class name retrieved from CIM server at address address - CPO3837E
Error retrieving metric values for class name from CIM server at address address - CPO3838E
Error retrieving metric values for metric name from CIM server at address address - CPO3850E
Unable to connect to CIM server at address - CPO3851E
Timeout while connecting to CIM server at address - CPO3852E
No CIM server at address - CPO3853E
Unknown address address - CPO3855E
Authentication error at CIM server at address - CPO3856E
Proxy authentication error at CIM server at address - CPO3860E
CIM_ERR_ACCESS_DENIED at CIM server at address. Error is "error" - CPO3861E
CIM_ERR_NOT_SUPPORTED at CIM server at address. Error is "error" - CPO3862E
CIM_ERR_INVALID_CLASS at CIM server at address. Error is "error" - CPO3863E
CIM_ERR_INVALID_NAMESPACE at CIM server at address. Error is "error" - CPO3864E
CIM_ERR_LOW_ON_MEMORY at CIM server at address. Error is "error" - CPO3865E
CIM_ERR_NOT_FOUND at CIM server at address. Error is "error" - CPO3866E
CIM_ERR_FAILED at CIM server at address. Error is "error" - CPO3870E
Error at CIM server at address. Error is "error" - CPO3880I
System system name in sysplex sysplex name is now monitored - CPO3881I
System system name in sysplex sysplex name monitoring stopped - CPO3900E
Error reading simulation file "filename". Error is "error" - CPO3901W
Missing simulation data for system at address address - CPO3902W
Missing simulation data for resource name - CPO3910I
CONFIG ONLINE for processors at system system name in sysplex sysplex name requested. CP/zAAP/zIIP: number of CPs/number of zAAPs/number of zIIPs - CPO3911I
CONFIG OFFLINE for processors at system system name in sysplex sysplex name requested. CP/zAAP/zIIP: number of CPs/number of zAAPs/number of zIIPs - CPO3912I
CONFIG ONLINE for processors at system system name in sysplex sysplex name requested. CP/zAAP/zIIP: number of CPs/number of zAAPs/number of zIIPs - CPO3913I
CONFIG OFFLINE for processors at system system name in sysplex sysplex name requested. CP/zAAP/zIIP: number of CPs/number of zAAPs/number of zIIPs - CPO3914I
CONFIG ONLINE for processors at system system name in sysplex sysplex name requested. CP/zAAP/zIIP: number of CPs/number of zAAPs/number of zIIPs - CPO3915I
CONFIG OFFLINE for processors at system system name in sysplex sysplex name requested. CP/zAAP/zIIP: number of CPs/number of zAAPs/number of zIIPs - CPO3940E
Error detecting the Provisioning Manager user name. Error is "error" - CPO3950E
Pass ticket generation for user user and application applid failed with return codes racf rc,racf rsn,saf rc - CPO3960I
Defined capacity base is value MSU for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name - CPO3961I
Capacity base is value MSU for capacity group group name of CPC CPC name - CPO3962I
Defined capacity increase initiated to value MSU for LPAR LPAR name of CPC CPC name with running system system name in sysplex sysplex name - CPO3963I
Group capacity increase initiated to value MSU for group group name of CPC CPC name - CPO3964I
Defined capacity decrease initiated to value MSU for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name - CPO3965I
Group capacity decrease initiated to value MSU for group group name of CPC CPC name - CPO3966I
Defined capacity is turned off for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name. Defined capacity management for this system stops - CPO3967I
Capacity management for group group name of CPC CPC name stops - CPO3968I
Defined capacity policy limit is reached for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name. Blocking policy limit is value MSU - CPO3969I
Group capacity policy limit is reached for group group name of CPC CPC name. Blocking policy limit is value MSU - CPO3970I
Policy limit no longer blocking defined capacity management for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name - CPO3971I
Policy limit no longer blocking capacity management for group group name of CPC CPC name - CPO3972I
Defined capacity change could not be initiated for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name. Target was value MSU - CPO3973I
Capacity change could not be initiated for group group name of CPC CPC name. Target was value MSU - CPO3974I
Defined capacity change for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name failed. Target was value MSU - CPO3975I
Capacity change for group group name of CPC CPC name failed. Target was value MSU - CPO3976I
An increase of defined capacity is recommended for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name. Allowed policy limit is value MSU - CPO3977I
An increase of group capacity is recommended for group group name of CPC CPC name. Allowed policy limit is value MSU - CPO3978I
A decrease of defined capacity is recommended for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name - CPO3979I
A decrease of group capacity is recommended for group group name of CPC CPC name - CPO3980I
Increase of defined capacity no longer recommended for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name - CPO3981I
Increase of group capacity no longer recommended for group group name of CPC CPC name - CPO3982I
Decrease of defined capacity no longer recommended for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name - CPO3983I
Decrease of group capacity no longer recommended for group group name of CPC CPC name - CPO3984I
Defined capacity change detected. New defined capacity is value MSU for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name - CPO3985I
Group capacity change detected. New capacity is value MSU for capacity group group name of CPC CPC name - CPO3986I
Defined capacity observed. Current capacity is value MSU for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name - CPO3987I
Group capacity observed. Current capacity is value MSU for capacity group group name of CPC CPC name - CPO3988E
Unexpected error occurred while changing defined capacity or group capacity - CPO3990I
Deprovisioning is not allowed. The global minimum defined capacity of value MSU is reached for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name - CPO3991I
Deprovisioning is not allowed. The global minimum group capacity of value MSU is reached for capacity group group name of CPC CPC name - CPO3992W
The base defined capacity of base value MSU is below the global minimum defined capacity of minimum value MSU for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name - CPO3993W
The base group capacity of base value MSU is below the global minimum group capacity of minimum value MSU for for capacity group group name of CPC CPC name - CPO3994I
No more defined capacity is needed for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name - CPO3995I
No more capacity is needed for group group name of CPC CPC name - CPO3996I
Defined capacity management for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name stops - CPO4001E
resource type resource name monitoring data monitoring metric was not available for analysis - CPO4002E
Analysis-step decision ID lacked of necessary data for deciding on provisioning provisioning type resources - CPO4003E
resource type resource name monitoring data monitoring metric has value 0 that is not valid - CPO4101W
Manual intervention detected for CPC name. Continue managing model model (CP number/capacity level) with zAAP number zAAPs and zIIP number zIIPs - CPO4103I
A change of the manually activated resources has been detected for CPC name. The base levels for provisioning management are now CP number CP, capacity level capacity level, zAAP number zAAP and zIIP number zIIP - CPO4104I
A change of the On/Off CoD record has been detected on CPC name. New record id is record id - CPO4105I
A change of the manually activated resources has been detected for CPC name. All resources of the defined On/Off CoD record recordid are now managed by the Provisioning Manager - CPO4106E
I/O error sending request to operator: "text" - CPO4107I
Message message for CPC name is cancelled - CPO4108I
Activation of resources for CPC name successfully initiated: model model (CP number/capacity level) with zAAP number zAAPs and zIIP number zIIPs - CPO4109I
Deactivation of resources for CPC name successfully initiated: model model (CP number/capacity level) with zAAP number zAAPs and zIIP number zIIPs - CPO4110E
Response "reply" to operator request for CPC name is not valid - CPO4111E
Response "reply" to operator request for CPC name is not valid - CPO4112I
Activation request for CPC name rejected - CPO4113I
Deactivation request for CPC name rejected - CPO4114I
The requested capacity on CPC name has been reached. Message message for this CPC is cancelled - CPO4115I
The CPC name is being stopped. Message message for this CPC is cancelled - CPO4116I
Workload situation has changed on CPC name. Message message for this CPC is cancelled - CPO4117I
No more capacity change needed on CPC name. Message message for this CPC is cancelled - CPO4118I
Provisioning timer timed out on CPC name. Message message for this CPC is cancelled - CPO4119I
Deprovisioning timer timed out on CPC name. Message message for this CPC is cancelled - CPO4120I
The provisioning planner is not in confirmation mode anymore. Message message for CPC name is cancelled - CPO4121I
Some temporary resources were already active when starting managing the CPC name. Only resources exceeding CP number CP, capacity level capacity level, zAAP number zAAP and zIIP number zIIP will be managed by the Provisioning Manager - CPO4122I
CPC name does not allow to activate capacity. Message message for this CPC is cancelled - CPO4130E
Response "reply" to operator request for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name is not valid - CPO4131E
Response "reply" to operator request for capacity group group name of CPC CPC name is not valid - CPO4150I
Policy recommends provisioning of resources due to scheduled activation on CPC CPC name. New recommendation is: New MSU MSU/New zAAP zAAP/New zIIP zIIP. Previous recommendation was: Old MSU MSU/Old zAAP zAAP/Old zIIP zIIP - CPO4151I
Policy recommends deprovisioning of resources due to scheduled deactivation on CPC CPC name. New recommendation is: New MSU MSU/New zAAP zAAP/New zIIP zIIP. Previous recommendation was: Old MSU MSU/Old zAAP zAAP/Old zIIP zIIP - CPO4152I
Policy recommends provisioning of resources due to scheduled activation on CPC CPC name. Recommendation is: MSU MSU/zAAP zAAP/zIIP zIIP - CPO4153I
Policy recommends deprovisioning of resources on CPC CPC name. New recommendation is: New MSU MSU/New zAAP zAAP/New zIIP zIIP. Previous recommendation was: Old MSU MSU/Old zAAP zAAP/Old zIIP zIIP - CPO4154I
Policy recommends provisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Increase CP capacity settings. Policy limit is New MSU MSU - CPO4155I
Policy recommends provisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Increase CP capacity settings or activate zAAPs. Policy limit is New MSU limit MSU/New zAAP limit zAAP - CPO4156I
Policy recommends provisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Increase CP capacity settings or activate zIIPs. Policy limit is New MSU limit MSU/New zIIP limit zIIP - CPO4157I
Policy recommends provisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Increase CP capacity settings or activate zAAPs or zIIPs. Policy limit is New MSU limit MSU/New zAAP limit zAAP/New zIIP limit zIIP - CPO4158I
Policy recommends provisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Increase CP capacity level. Policy limit is New MSU MSU - CPO4159I
Policy recommends provisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Increase CP capacity level or activate zAAPs. Policy limit is New MSU limit MSU/New zAAP limit zAAP - CPO4160I
Policy recommends provisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Increase CP capacity level or activate zIIPs. Policy limit is New MSU limit MSU/New zIIP limit zIIP - CPO4161I
Policy recommends provisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Increase CP capacity level or activate zAAPs or zIIPs. Policy limit is New MSU limit MSU/New zAAP limit zAAP/New zIIP limit zIIP - CPO4162I
Policy recommends provisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Activate zAAPs. Policy limit is New zAAP limit zAAP - CPO4163I
Policy recommends provisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Activate zIIPs. Policy limit is New zIIP limit zIIP - CPO4164I
Policy recommends provisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Activate zAAPs or zIIPs. Policy limit is New zAAP limit zAAP/New zIIP limit zIIP - CPO4165I
Policy recommends deprovisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Decrease CP capacity settings. Policy limit is New MSU MSU - CPO4166I
Policy recommends deprovisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Decrease CP capacity settings or deactivate zAAPs. Policy limit is New MSU limit MSU/New zAAP limit zAAP - CPO4167I
Policy recommends deprovisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Decrease CP capacity settings or deactivate zIIPs. Policy limit is New MSU limit MSU/New zIIP limit zIIP - CPO4168I
Policy recommends deprovisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Decrease CP capacity settings or deactivate zAAPs or zIIPs. Policy limit is New MSU limit MSU/New zAAP limit zAAP/New zIIP limit zIIP - CPO4169I
Policy recommends deprovisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Decrease CP capacity level. Policy limit is New MSU MSU - CPO4170I
Policy recommends deprovisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Decrease CP capacity level or deactivate zAAPs. Policy limit is New MSU limit MSU/New zAAP limit zAAP - CPO4171I
Policy recommends deprovisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Decrease CP capacity level or deactivate zIIPs. Policy limit is New MSU limit MSU/New zIIP limit zIIP - CPO4172I
Policy recommends deprovisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Decrease CP capacity level or deactivate zAAPs or zIIPs. Policy limit is New MSU limit MSU/New zAAP limit zAAP/New zIIP limit zIIP - CPO4173I
Policy recommends deprovisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Deactivate zAAPs. Policy limit is New zAAP limit zAAP - CPO4174I
Policy recommends deprovisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Deactivate zIIPs. Policy limit is New zIIP limit zIIP - CPO4175I
Policy recommends deprovisioning of resources on behalf of observed workload on CPC CPC name. New recommendation is: Deactivate zAAPs or zIIPs. Policy limit is New zAAP limit zAAP/New zIIP limit zIIP - CPO4201I
Proposed upgrade for CPC name is model target with zAAP count zAAPs and zIIP count zIIPs. Enter 1 to activate or 2 to reject - CPO4202I
Proposed downgrade for CPC name is model target with zAAP count zAAPs and zIIP count zIIPs. Enter 1 to deactivate or 2 to reject - CPO4203I
Unexpected capacity setting for CPC name. Action may be pending. Expected expected model(expected CP count/expected capacity level) expected zAAP count/expected zIIP count. Actual: actual model(actual CP count/actual capacity level) actual zAAP count/actual zIIP count - CPO4204I
Unexpected capacity setting for CPC name. Action may be pending. Expected expected model(expected CP count/expected capacity level) expected zAAP count/expected zIIP count. Actual: actual model(actual CP count/actual capacity level) actual zAAP count/actual zIIP count - CPO4205I
CPC name: Enter '1' to keep waiting for pending activation or '2' to accept current capacity setting - CPO4206I
CPC name: Enter '1' to keep waiting for pending deactivation or '2' to accept current capacity setting - CPO4210I
Proposed increase of DC for LPAR LPAR name on CPC CPC name to value MSU. Enter 1 to increase or 2 to reject - CPO4211I
Proposed increase of GC for group group name on CPC CPC name to value MSU. Enter 1 to increase or 2 to reject - CPO4212I
Proposed decrease of DC for LPAR LPAR name on CPC CPC name to value MSU. Enter 1 to decrease or 2 to reject - CPO4213I
Proposed decrease of GC for group group name of CPC CPC name to value MSU. Enter 1 to decrease or 2 to reject - CPO4214I
Operator request message is cancelled for the increase of defined capacity for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name - CPO4215I
Operator request message is cancelled for the increase of group capacity for group group name of CPC CPC name - CPO4216I
Operator request message is cancelled for the decrease of defined capacity for LPAR LPAR name of CPC CPC name with system system name in sysplex sysplex name - CPO4217I
Operator request message is cancelled for the decrease of group capacity for group group name of CPC CPC name - CPO4250I
Failing command for CPC name detected. Continuing with current information - CPO4301E
System information for system system in sysplex sysplex not available - CPO4302E
System information for system system in sysplex sysplex not available - CPO4307W
Requested CONFIG ONLINE of processors for system system in sysplex sysplex did not occur in time - CPO4308W
Requested CONFIG OFFLINE of processors for system system in sysplex sysplex did not occur in time - CPO4309W
Failed to request CONFIG ONLINE of processors for system system in sysplex sysplex failed. - CPO4310W
Requested CONFIG OFFLINE of processors for system system in sysplex sysplex failed. - CPO4400E
The requested model target for CPC name is not allowed - CPO4402E
The target model target for CPC name is not allowed - CPO4403E
The target model target for CPC name is not allowed - CPO4404E
The target model target for CPC name is not allowed - CPO4405W
The target model target for CPC name is not allowed - CPO4406I
No additional resources will be managed by the Provisioning Manager. Managed resources for CPC name remain active for at least minutes minutes - CPO4407I
Management for CPC name to model model started. Managed resources remain active for at least minutes minutes - CPO4410E
Target number of target zAAP processors for CPC name is not allowed. The number of manually activated zAAP processors is number - CPO4411W
No manually activated zAAP processors active for CPC name - CPO4412I
Management of number zAAP processors for CPC name started. Managed resources remain active for at least minutes minutes - CPO4420E
Target number of target zIIP processors for CPC name is not allowed. The number of manually activated zIIP processors is number - CPO4421W
No manually activated zIIP processors active for CPC name - CPO4422I
Management of number zIIP processors for CPC name started. Managed resources remain active for at least minutes minutes - CPO4430I
Record report generated at time - CPO5000E
The Provisioning Manager is not started - CPO5001E
The Provisioning Manager may not be started - CPO5010E
User is not authorized to query the Provisioning Manager - CPO5011E
User is not authorized to query the Provisioning Manager - CPO5012E
User is not authorized to control the Provisioning Manager - CPO8010E
Authentication error: User or password may not be valid. For further information check the z/OS console messages - CPO8011E
Authentication error: User or password may not be valid. For further information check the z/OS console messages - CPO8020E
Security error: Access to the host is denied. For further information check the z/OS console messages - CPO8021E
Security error: Access to the host is denied. For further information check the z/OS console messages - CPO8022E
A security error occurred: "CIMException class". For further information check the z/OS console messages - CPO8030E
No CIM server found - CPO8031E
Unable to connect to CIM server - CPO8032E
The specified host address is unknown - CPO8033E
Timeout while connecting to host address - CPO8034E
An unknown CIM transport exception occurred: "CIMException class". For further information check the z/OS console messages - CPO8040E
Access to the host is denied. For further information check the z/OS console messages - CPO8041E
Unable to connect to Capacity Provisioning CIM provider - CPO8042E
No Capacity Provisioning Domain configured on the target system - CPO8050E
A CIM exception occurred: Error is "error". For further information check the z/OS console messages - CPO8051E
Unable to connect to CIM server, the connection is lost. Connect to the host again - CPO8052E
No Provisioning Manager configured for domain domain name - CPO8053E
No connection established to domain domain name - CPO8054I
Connection established to domain domain name - CPO8056I
Status information successfully refreshed - CPO8057I
Disconnected from domain domain name - CPO8058W
Status information could not be refreshed - CPO8059E
The target system (z/OS version release) and the version of the Control Center are not compatible - CPO8060E
The connection to domain domain name is lost. Connect again - CPO8061E
The Control Center is not connected to a Provisioning Manager - CPO8063E
The CIM client was not found. Specify the CIM client in the "Preferences" dialog. For details refer to the product documentation - CPO8064I
CIM client jarFile specified. If CIM traces are needed, restart the Capacity Provisioning Control Center - CPO8065W
Different CIM client jarFile specified, restart the Capacity Provisioning Control Center for the changes to take effect - CPO8066I
The time zone changed from oldtimezone to newtimezone - CPO8067E
The CIM client was not found. Specify the CIM client in the "Preferences" dialog. For details refer to the product documentation - CPO8068I
CIM client jarFile specified. If CIM traces are needed, restart the Capacity Provisioning Control Center - CPO8069W
Different CIM client jarFile specified, restart the Capacity Provisioning Control Center for the changes to take effect - CPO8071E
The Provisioning Manager ist not started - CPO8072E
The request failed - CPO8073E
The response failed - CPO8074E
Unknown error - CPO8075E
The installation of name was not successful - CPO8076I
name is successfully installed - CPO8100E
The settings file filename cannot be found - CPO8101E
The settings file filename cannot be saved - CPO8105E
Unable to read settings file filename - CPO8106E
Unable to save settings file filename - CPO8107E
Unable to store the user preference "value" for key "value key" - CPO8108E
Unable to retrieve the user preference for key "value key" - CPO8110E
Unable to parse the policy filename. Error details - CPO8111E
Unable to parse the configuration filename. Error details - CPO8112E
Unable to parse the Provisioning Manager connections filename. Error details - CPO8121W
At least one daylight saving time switch is contained during start and end date - CPO8122E
Start Time and End Time must be different - CPO8123E
Deadline Time must be between Start Time and End Time or equal to End Time - CPO8200W
If you specify the trace level traceLevelALL or traceLevelFINER for the component AUIML the trace could contain your password - CPO8300E
Internal error - CPO8301E
Internal error - CPO8302E
Internal error - CPO8303E
Internal error - CPO8304E
Internal error - CPO8305E
Internal error - CPO8306E
Internal error - CPO8307E
Internal error - CPO8308E
Internal error - CPO8309E
Internal error - CPO8310E
Internal error - CPO8311E
Internal error - CPO8312E
Internal error - CPO8313E
Internal error - CPO8700E
Report parsing error - CPO8701E
Report download error - CPO8703E
Policy Installation Error - CPO8704E
Policy Activation Error - CPO8705E
Configuration Installation Error - CPO8706E
List download error - CPO8707E
Configuration Activation Error - CPO8708E
Policy Download Error - CPO8709E
Configuration Download Error - CPO9800E
Index index is out of bounds - CPO9801E
Attribute attribute already exists - CPO9802E
Referenced attribute attribute not found - CPO9803E
Attribute attribute does not exist - CPO9804E
Attribute attribute does not support multiple values - CPO9805E
Child of type type not found - CPO9806E
Policy element namespace namespace is incompatible - CPO9807E
Policy element is already contained in a policy element - CPO9808E
Policy element element 1 is not a valid first child element of a element 2 policy element - CPO9809E
Policy element element 1 is not a valid last child element of a element 2 policy element - CPO9810E
Policy element element 1 is not a valid successor of a element 2 policy element - CPO9811E
Policy element element 1 is not a valid predecessor of a element 2 policy element - CPO9812E
Policy element element can not be replaced - CPO9813E
A element 1 element can not contain more than number element 2 elements - CPO9814E
Operation not possible because policy element element is not contained in a tree - CPO9815E
Policy tree structure disrupted - CPO9816E
Referenced policy element of type type not found - CPO9817E
Passed input parameter is null - CPO9818E
Policy element element 1 is not a valid child element of element 2 - CPO9819E
Policy element has no ID attribute - CPO9820E
Integer value not allowed for attribute attribute - CPO9821E
Cannot convert value of attribute attribute to integer - CPO9822E
Date value not allowed for attribute attribute - CPO9823E
Cannot convert value of attribute attribute to date - CPO9824E
Fixed-point value not allowed for attribute attribute - CPO9825E
Cannot convert value of attribute attribute to fixed-point - CPO9828E
Policy element value not allowed for attribute attribute - CPO9829E
Cannot convert value of attribute attribute to policy element value - CPO9831W
An identical Service Class Period Filter already exists - CPO9832E
Resource type type is unknown - CPO9833E
Deprovisioning PI must be at least difference less than Provisioning PI - CPO9834E
A definition for the system system - sysplex sysplex combination already exists - CPO9835E
A definition for that CPC already exists - CPO9836W
Alternate Host Address equal to Primary Host Address - CPO9837E
Property value must not be set - CPO9838E
Property value must be set - CPO9839E
Multiple definitions exist for CPC "CPC name" - CPO9840W
A MSU, zAAP, or zIIP limit greater than zero should be defined - CPO9841W
An Importance or Included Service Class Filter should be defined - CPO9842W
A Time Condition with such properties already exists - CPO9843W
A Connection with such properties already exists - CPO9844E
Value property must not be longer than number characters - CPO9845W
Max. Activation (MSU) value limit1 is higher than Max. Activation (MSU) value limit2 in Maximum Processor Scope - CPO9846W
Max. zAAP Processors value limit1 is higher than Max. zAAP Processors value limit2 in Maximum Processor Scope - CPO9847E
Element element is missing - CPO9848E
Element element contains too few elements - CPO9849E
Property value is mandatory - CPO9850E
Value is not a valid property value - CPO9851E
A element with such a property value already exists - CPO9852E
A element has to be specified - CPO9853E
Property value must not be less than minimum - CPO9854E
Property value must not be higher than maximum - CPO9855E
Property value 1 must be less than property value 2 of predecessor element - CPO9856E
Property value 1 must be less than or equal to property value 2 of predecessor element - CPO9857E
Property value 1 must be higher than property value 2 of predecessor element - CPO9858E
Property value 1 must be higher than or equal to property value 2 of predecessor element - CPO9859E
Property value 1 must be less than property value 2 of successor element - CPO9860E
Property value 1 must be less than or equal to property value 2 of successor element - CPO9861E
Property value 1 must be higher than property value 2 of successor element - CPO9862E
Property value 1 must be higher than or equal to property value 2 of successor element - CPO9863E
Property value 1 must be less than property value 2 - CPO9864E
Property value 1 must be less than or equal to property value 2 - CPO9865E
Property value 1 must be higher than property value 2 - CPO9866E
Property value 1 must be higher than or equal to property value 2 - CPO9867E
Value is not a valid property value. Valid values are floating-point numbers in the range range - CPO9868E
Value is not a valid property value. Valid values are integers in the range range - CPO9869W
A Processor Limit for CPC CPC name is not defined in the Maximum Processor Scope - CPO9870W
A element should be specified - CPO9871W
Max. zIIP Processors value limit1 is higher than Max. zIIP Processors value limit2 in Maximum Processor Scope - CPO9872W
Primary Activation (MSU) value limit1 is higher than Max. Activation (MSU) value limit2 in Maximum Processor Scope - CPO9873W
Secondary Activations (MSU) value limit1 is higher than Max. Activation (MSU) value limit2 in Maximum Processor Scope - CPO9874W
Defined Capacity Limit for system system and sysplex sysplex in rule rule is not defined in the Maximum Defined Capacity Scope - CPO9875E
Element does not exist for namespace namespace - CPO9876E
Value is not a valid property value. Valid values are integers in the range range or '*' - CPO9877W
Short duration values may require setup adjustments - CPO9878W
At least one day of the week should be specified - CPO9879W
Max. Increase (MSU) value increase1 for system system in sysplex sysplex in Defined Capacity Scope is higher than Max. Increase (MSU) value increase2 in Maximum Defined Capacity Scope - CPO9880E
At least one limit in Maximum Processor Scope, Maximum Defined Capacity Scope or Maximum Group Capacity Scope has to be specified. - CPO9881W
Primary Increment (MSU) value increment for system system in sysplex sysplex is higher than Max. Increase (MSU) value increase - CPO9882W
Secondary Increment (MSU) value increment for system system in sysplex sysplex is higher than Max. Increase (MSU) value increase - CPO9883E
A definition for capacity group groupname on CPC cpc already exists - CPO9884W
Max. Increase (MSU) value increase1 for capacity group groupname on CPC cpc in Group Capacity Scope is higher than Max. Increase (MSU) value increase2 in Maximum Group Capacity Scope - CPO9885W
Group Capacity Limit for group groupname and CPC cpc in rule rule is not defined in the Maximum Group Capacity Scope - CPO9886W
Primary Increment (MSU) value increment for capacity group groupname on CPC cpc is higher than the Max. Increase (MSU) value increase - CPO9887W
Secondary Increment (MSU) value increment for capacity group groupname on CPC cpc is higher than the Max. Increase (MSU) value increase - CPO9888E
At least one limit in Processor Scope, Defined Capacity Scope or Group Capacity Scope has to be specified. - CPO9900E
Fatal parsing error at line line: message - CPO9901E
Parsing error at line line: message - CPO9902W
Parsing warning at line line: message - CPO9903E
Parsing error at line line: Unknown processing instruction - CPO9904E
Parsing error at line line: Unknown entity entity - CPO9905E
Parsing error at line line: Element element does not allow multiple values - CPO9906E
Parsing error at line line: No character data allowed within element element - CPO9907E
Parsing error at line line: Unexpected end of document - CPO9908E
Parsing error at line line: document structure is not valid, contains nested attributes - CPO9909E
Parsing error at line line: document structure is not valid, end of document expected - CPO9910E
Parsing error at line line: root element is not valid - CPO9911E
Parsing error at line line: Unknown namespace - CPO9912E
Parsing error at line line: Unknown element element of namespace namespace found - CPO9913E
Parsing error at line line: Misplaced element element found - CPO9914E
Parsing error at line line: End-tag tag does not have corresponding start-tag - CPO9915E
Parsing error at line line: End-tag end-tag does not match start-tag start-tag - CPO9916E
Parser configuration error: message