z/OS Security Server RACF Messages and Codes
Previous topic | Next topic | Contents | Contact z/OS | Library | PDF


Dynamic parse (IRRDPI00) messages

z/OS Security Server RACF Messages and Codes
SA23-2291-00

Dynamic parse messages can be issued at the following times:
  • When dynamic parse is initialized
  • When IRRDPI00 is run (usually during system IPL)
  • When a user issues a RACF® command that uses dynamic parse to check the syntax of the operands specified on the RACF command.
  • IRR52001I
    Command IRRDPI00 is invalid when RACF is not active.
  • IRR52002I
    User userid not authorized to issue command IRRDPI00.
  • IRR52003I
    Command IRRDPI00 failed. Unable to establish ESTAE environment. Return code from ESTAE is return-code
  • IRR52004I
    Command IRRDPI00 failed. Unable to process the parameters specified.
  • IRR52005I
    Dynamic parse initialization failed. No action was taken. Return code from IKJPARS is return-code
  • IRR52006I
    Unable to completely parse command command because the command line was incomplete. Processing continues with the next input line.
  • IRR52007I
    Command IRRDPI00 failed. No action was taken. Return code from STACK is return-code
  • IRR52008I
    Command IRRDPI00 failed. No action was taken. Return code from GETLINE is return-code
  • IRR52009I
    Error in PUTLINE service routine. Processing continues with next input line. Return code is return-code
  • IRR52010I
    Keyword keyword is specified out of order. Processing continues with next command.
  • IRR52011I
    Name name is invalid. Possible line continuation problem. Processing continues with the next input line.
  • IRR52012I
    Segment name invalid for profile type specified. Processing continues with the next command.
  • IRR52013I
    Field name invalid for profile type specified.
  • IRR52014I
    SUBFIELD keyword is invalid for flag field specifications. Processing continues with the next command.
  • IRR52015I
    Mask values are required for flag field specifications, but are not specified. Processing continues with the next command.
  • IRR52016I
    SUBFIELD, TRANSLATE, and ANDMASK/ORMASK are mutually exclusive, only one may be specified. Processing continues with the next command.
  • IRR52017I
    LIST keyword was not specified for a repeat group specification. Processing continues with the next command.
  • IRR52018I
    Length of ORMASK is too long for field in RACF data base. Processing continues with the next command.
  • IRR52019I
    Length of ANDMASK is too long for field in RACF data base. Processing continues with the next command.
  • IRR52020I
    Dynamic Parse storage allocation failed. No action taken. Return code is return-code. Internal code is internal-code
  • IRR52021I
    You are not authorized to view segment-name segments.
  • IRR52022I
    Severe program error occurred. Consult your System Programmer. Internal code is code
  • IRR52023I
    Invalid input to dynamic parse table update.
  • IRR52024I
    Unable to obtain space for Dynamic Parse Update work area. Return code from GETMAIN is return-code
  • IRR52025I
    Unable to obtain space for Dynamic Parse Table. Return code from GETMAIN is return-code.
  • IRR52026I
    Unable to FREEMAIN space for dynamic parse table. Size of FREEMAIN is size at location location. Return code is return-code.
  • IRR52027I
    Unable to perform a check for this field against the RACF template definition because either PROFILE keyword information or SEGMENT keyword information was incomplete. Processing continues with the next command.
  • IRR52028I
    Either PROMPT or DEFAULT must be specified for the SUBFIELD keyword. Processing continues with the next input command.
  • IRR52029I
    PROMPT and DEFAULT are mutually exclusive, only one may be specified. Processing continues with the next input command.
  • IRR52030I
    PTYPE must be specified when SUBFIELD is specified.
  • IRR52031I
    Command IRRDPI00 failed because the dynamic parse specifications data set is empty. No action was taken.
  • IRR52100I
    Processing terminated. Dynamic parse is not active. Contact your system programmer.
  • IRR52101I
    Processing terminated. Unable to obtain storage for dynamic parse work area.
  • IRR52102I
    Insufficient storage for internal work area. Processing terminated.
  • IRR52103I
    FREEMAIN failed for PCL work area. Contact your IBM support center.
  • IRR52104I
    Dynamic parse exit module-name not found in load library. Command processing continues.
  • IRR52105I
    Field in dynamic parse table is not found in template. Contact your system programmer.
  • IRR52106I
    Segment not found in Template. Contact your system programmer.
  • IRR52107I
    NOTIFY exit module-name not found.
  • IRR52108I
    Insufficient storage for internal workarea. Processing terminated. GETMAIN return code is return-code. Internal code is code.
  • IRR52109I
    Dynamic parse storage allocation failed. No action taken. Return code is return-code.
  • IRR52110I
    Insufficient storage for command buffer. Processing terminated.
  • IRR52112I
    Sub-operands are not allowed with ‘NO-’ keyword. Processing terminated.
  • IRR52113I
    Keyword keyword contains invalid or missing subfield(s). Processing continues.
  • IRR52114I
    Processing terminated. Unable to obtain storage requested.
  • IRR52115I
    Error during RACF manager processing. Return code is return-code. Reason code is reason-code.
  • IRR52116I
    RACF data base access denied RACF is not currently active or the RACF dataset containing the requested profile is not active.
  • IRR52117I
    LISTING exit module-name not found.
  • IRR52118I
    Segment name abbreviation value is ambiguous. Please enter again.
  • IRR52119I
    Keyword name abbreviation value is ambiguous. Please enter again.
  • IRR52120I
    SIZE size is out of range.
  • IRR52121I
    SIZE specified is greater than MAXSIZE. SIZE is adjusted to be equal to MAXSIZE.
  • IRR52122I
    Conflict between SIZE and MAXSIZE. Operand ignored.
  • IRR52123I
    Data must be hexadecimal.
  • IRR52124I
    Operand is not valid. Session key interval is not in range 1 - value.
  • IRR52125I
    Operand is not valid. Session key exceeds 8 characters.
  • IRR52126I
    RACXTRT failed. Return code is return-code. Reason code is reason-code.
  • IRR52127I
    Field level access checking failed for segment segment-name.
  • IRR52128I
    Mutually exclusive operands are specified for keyword keyword. Processing terminated.
  • IRR52129I
    The PRIMARY sub-operand was ignored. value is not a valid language code.
  • IRR52130I
    The PRIMARY sub-operand was ignored. The MVS message service is not active.
  • IRR52131I
    The PRIMARY sub-operand was ignored. The specified language is not active.
  • IRR52132I
    The SECONDARY sub-operand was ignored. value is not a valid language code.
  • IRR52133I
    The SECONDARY sub-operand was ignored. The MVS message service is not active.
  • IRR52134I
    The SECONDARY sub-operand was ignored. The specified language is not active.
  • IRR52135I
    The PRIMARY sub-operand was ignored. QRYLANG macro failed with return code xxxx and reason code yyyy.
  • IRR52136I
    The SECONDARY sub-operand was ignored. QRYLANG macro failed with return code xxxx and reason code yyyy.
  • IRR52137I
    Purge of VLF class IRRUMAP failed with return code nn
  • IRR52138I
    Purge of VLF class IRRGMAP failed with return code nn
  • IRR52139I
    KEYMASKED or KEYENCRYPTED data must be 16 hexadecimal characters.
  • IRR52140I
    Either the KEYMASKED or the KEYENCRYPTED sub-operand has been specified twice. Command Processing stops.
  • IRR52141I
    KEYMASKED and KEYENCRYPTED are mutually exclusive sub-operands, and both have been specified. Command Processing stops.
  • IRR52142I
    The KEYENCRYPTED sub-operand was specified but a Cryptographic product is not available on this system. Command Processing stops.
  • IRR52143I
    Warning: =MEMBER should not be specified for both USER and GROUP.
  • IRR52144I
    Warning: User userid is not defined to RACF.
  • IRR52145I
    Warning: Group group-name is not defined to RACF.
  • IRR52146I
    Warning: User userid is not connected to group group-name.
  • IRR52147I
    Note: Specification of a value for GROUP is recommended for this profile.
  • IRR52148I
    Warning: A value for USER should be specified in STDATA.
  • IRR52149I
    Warning: STARTED profiles should have (or match) names with two qualifiers.
  • IRR52150I
    Warning: SETROPTS GENERIC(STARTED) should have been issued before defining this profile.
  • IRR52151I
    Unexpected RACROUTE REQUEST=EXTRACT error while retrieving profile profile. SAF RC = safrc, RACF RC = racfrc, RACF RSN = rsncode.
  • IRR52152I
    Both AT and ONLYAT cannot be specified for the same command. The command is not issued.
  • IRR52153I
    Unexpected return code return-code and reason code reason-code encountered while attempting an ICHEINTY operation.
  • IRR52154I
    The information in the class1 mapping profile profile1 does not match the profile2 profile in the class2 class.
  • IRR52155I
    The DCE principal UUID must be unique for each RACF User ID. The DCEUUIDS mapping profile is not updated.
  • IRR52156I
    Purge of VLF class IRRSMAP failed with return code return-code.
  • IRR52157I
    Field field-name is not allowed for a profile in class class-name.
  • IRR52158I
    Field field-name exceeds limit characters.
  • IRR52159I
    Required subfield subfield-name in field field is not specified.
  • IRR52160I
    Subfield subfield-name in field field is not valid.
  • IRR52161I
    The application user identity must be unique for each RACF User ID. The mapping profile for userid will not be not updated.
  • IRR52162I
    Unable to determine the name of the local Kerberos realm. Command processing ends.
  • IRR52163I
    The "char" character is not allowed in KERBNAME. Command processing ends.
  • IRR52164I
    KERBNAME may not be prefixed by "/.../". Command processing ends.
  • IRR52165I
    The value for the segment_name segment operand_name operand must be unique. Command processing ends.
  • IRR52166I
    The fully qualified form of the local Kerberos principal name must not exceed 240 characters. Command processing ends.
  • IRR52167I
    Unable to validate MINTKTLFE, MAXTKTLFE, and DEFTKTLFE. Ticket lifetime values are ignored.
  • IRR52168I
    Values specified for MINTKTLFE, MAXTKTLFE, or DEFTKTLFE are not valid. Ticket lifetime values are ignored.
  • IRR52169I
    A request to process Kerberos key information for profile-name failed. Command processing continues.
  • IRR52170I
    The LDAP URL specified by the LDAPHOST operand was not prefixed by "ldap://" or "ldaps://". Command processing ends.
  • IRR52171I
    Password not valid for LDAP BIND. Command processing ends.
  • IRR52172I
    A request to process LDAP BIND password information for profile-name failed. Command processing continues.
  • IRR52173I
    RACF was unable to determine if additional application password processing is required. Command processing continues.
  • IRR52174I
    Incorrect [UID|GID] id. This value is already in use by name.
  • IRR52175I
    You are not authorized to specify the SHARED keyword.
  • IRR52176I
    SHARED.IDS is defined, but application identity mapping is not implemented.
  • IRR52177I
    [User|Group] name was assigned an OMVS [UID|GID] value of id.
  • IRR52178I
    You cannot use automatic [UID|GID] assignment when a value already exists.
  • IRR52179I
    The BPX.NEXT.USER profile must be defined before you can use automatic [UID|GID] assignment.
  • IRR52180I
    The BPX.NEXT.USER profile does not allow automatic [UID|GID] assignment.
  • IRR52181I
    The BPX.NEXT.USER profile has run out of possible [UID|GID] values.
  • IRR52182I
    Automatic [UID|GID] assignment requires application identity mapping to be implemented.
  • IRR52183I
    Use of automatic [UID|GID] assignment requires SHARED.IDS to be implemented.
  • IRR52184I
    You cannot use automatic [UID|GID] assignment with a list of names.
  • IRR52185I
    The same [UID|GID] cannot be assigned to more than one [user|group].
  • IRR52186I
    You cannot specify both [AUTOUID|AUTOGID] and SHARED.
  • IRR52187I
    Incorrect APPLDATA syntax for the BPX.NEXT.USER profile.
  • IRR52188I
    The POSIT value is missing for the CDT profile profile-name. You must correct this error before the class profile-name can be added to the dynamic class descriptor table.
  • IRR52189I
    Incorrect POSIT value. The valid range is 0 to 1023.
  • IRR52190I
    Warning: The POSIT value is not within the recommended ranges for installation use. The valid ranges are 19-56 and 128-527.
  • IRR52191I
    Incorrect [ GROUP group-name | MEMBER member-name ]. This name is already used by class class-name.
  • IRR52192I
    Incorrect [ MAXLENGTH | MAXLENX ] value. The valid range is 1 to 246.
  • IRR52193I
    Incorrect DEFAULTRC value. The valid values are 0, 4, and 8.
  • IRR52194I
    Incorrect KEYQUALIFIERS value. The valid range is 0 to 123.
  • IRR52195I
    Incorrect profile name profile-name . A class by this name is already defined in the class descriptor table supplied by IBM.
  • IRR52196I
    Incorrect profile name profile-name. USER, GROUP, and DATASET are reserved class names.
  • IRR52197I
    Warning: Class name class-name is a duplicate of a class in the installation-defined class descriptor table (ICHRRCDE).
  • IRR52198I
    Warning: The attribute class-attribute in class class-name may be in error. The value in the static definition (ICHRRCDE) is value-1. The value in the dynamic definition is value-2.
  • IRR52199I
    Warning: Class name class-name does not contain a national character nor a number.
  • IRR52200I
    [ GROUP | MEMBER ] name and profile name must be different. You must correct this error before the class profile-name can be added to the dynamic class descriptor table.
  • IRR52201I
    SIGNAL(YES) is not valid with RACLIST(DISALLOWED). You must correct this error before the class profile-name can be added to the dynamic class descriptor table.
  • IRR52202I
    MAXLENX value must be greater than or equal to the MAXLENGTH value. You must correct this error before the class profile-name can be added to the dynamic class descriptor table.
  • IRR52203I
    MEMBER and GROUP are mutually exclusive. You must correct this error before the class profile-name can be added to the dynamic class descriptor table.
  • IRR52204I
    Warning: segment-name segment is only valid for the class-name class.
  • IRR52205I
    Warning: CDTINFO is required for the CDT class.
  • IRR52206I
    Unable to establish ESTAE environment. Return code from ESTAE is return-code
  • IRR52207I
    The attribute class-attribute in class profile-name is in error. The value in the static definition (ICHRRCDE) is value-1. The value in the dynamic definition is value-2.
  • IRR52208I
    Incorrect { RSLKEY | TSLKEY } value. The valid range is 0 to maximum-value, or you may specify 99 to indicate all { resource | transaction } security level keys.
  • IRR52209I
    Incorrect { RSLKEY | TSLKEY } value. You cannot specify key-value in a list of keys.
  • IRR52210I
    Incorrect MAPPINGTIMEOUT value. The valid range is 1 to 3600.
  • IRR52211I
    The IRRDPI00 LIST command encountered an error. parameter is not valid.
  • IRR52212I
    Warning: GENERIC(ALLOWED) is ignored for profile profile-name because MEMBER was also specified.
  • IRR52213I
    keyword-1 is not valid with keyword-2. You must correct this error before the class profile-name can be added to the dynamic class descriptor table.
  • IRR52214I
    Warning: USEMAP=NO, DOMAP=NO, and MAPREQUIRED=YES is not a valid configuration.
  • IRR52215I
    The attribute keyword-1 in class class-1 is not compatible with the attribute keyword-2 in class class-2 because the classes share a POSIT number.
  • IRR52216I
    An error was detected in the definition of custom field profile-name. error-description
  • IRR52217I
    Command failed by field validation exit. exit-text
  • IRR52218I
    The value specified for keyword-name is not valid. The { maximum value | minimum value | maximum length } allowed is limit.
Parent topic: IRR messages for commands, utilities, and other tasks

Go to the previous page Go to the next page

Notices | Terms of use | Support | Contact z/OS | zFavorites



Copyright IBM Corporation 1990, 2014