Checking the message logs (EQQMLOG)

When you have created a current plan and have started all Tivoli Workload Scheduler for z/OS address spaces in your configuration, check the message log of the controller and of all trackers.

Controller message log

Look for these messages in the message log of the controller:

Active normal-mode manager messages

EQQZ005I OPC SUBTASK NORMAL MODE MGR  IS BEING STARTED
EQQN013I OPC JOB TRACKING IS NOW ACTIVE AND CURRENT PLAN DD-NAME
         IS EQQCP1DS

Note:

Active job-tracking log archiver messages. In the preceding message, the active current plan ddname is either EQQCP1DS or EQQCP2DS.

EQQZ005I OPC SUBTASK JT LOG ARCHIVER IS BEING STARTED
EQQN080I THE LOG ARCHIVER TASK HAS STARTED

Active job-tracking log archiver messages

Note:

The preceding messages, EQQZ085I and EQQG001I, are repeated for each general service executor that is started. The number of executors started depends on the value you specified on the GSTASK keyword of the OPCOPTS initialization statement. The default is to start all five executors.

Active data-router-task messages

EQQZ005I OPC SUBTASK DATA ROUTER TASK IS BEING STARTED
EQQF001I DATA ROUTER TASK INITIALIZATION IS COMPLETE

If you have specified that APPC support should be started, check that these messages appear:

Active APPC-task messages

EQQZ005I OPC SUBTASK APPC TASK IS BEING STARTED
EQQO001I APPC TASK INITIALIZATION IS COMPLETE

This message must be issued for the first controller or server start after APPC starts; it is issued by APPC to the system log:

APPC scheduler active - system log messages

ATB050I LOGICAL UNIT IS4MEOP4 FOR TRANSACTION SCHEDULER EOP4 HAS BEEN
ADDED TO THE APPC CONFIGURATION.

If you have specified an event-reader function, check that these messages appear:

Active event-reader messages

EQQZ005I OPC SUBTASK EVENT READER IS BEING STARTED
EQQR025I ERDR 01 STARTED

The numeric value on message EQQR025I indicates which event reader is started. The same value cannot be specified on more than one ERSEQNO keyword at the same node. No more than 16 event-reader tasks can be specified at the same node.

If the controller uses XCF connections, the XCF group is activated when the controller is started. Several messages can appear in the message log, indicating that a tracker or standby controller has started and that it has joined the group. If the controller communicates with a tracker using XCF, check for this message to verify the connection:

Active tracker-connection message

EQQF007I XCF MEMBER TRACK2 HAS JOINED THE GROUP. THE DESTINATION WILL BE
EQQF007I REPORTED ACTIVE

If a standby controller is started, check for this message:

Active standby-controller-connection message

EQQF008I XCF MEMBER CTRSTBY1 HAS JOINED THE GROUP AS STANDBY FOR THE
EQQF008I OPC CONTROLLER

If the controller uses an NCF connection, check that these messages appear (where NCFCON01 is the VTAM® application ID of the controller, and NCFTRK01 is the VTAM application ID of the tracker):

Active NCF-connection messages

EQQZ005I OPC SUBTASK VTAM I/O TASK IS BEING STARTED
EQQV001I NCF APPLICATION STARTED
EQQV024I ACB SUCCESSFULLY OPENED
EQQV036I SESSION NCFCON01-NCFTRK01 ESTABLISHED

If the controller uses the end-to-end with fault tolerance capabilities feature to schedule on distributed environments, check that these messages appear in the controller EQQMLOG:

Messages for active end-to-end scheduling with fault tolerance capabilities

EQQZ005I OPC SUBTASK END TO END ENABLER IS BEING STARTED

EQQZ085I OPC SUBTASK END TO END SENDER IS BEING STARTED

EQQZ085I OPC SUBTASK END TO END RECEIVER IS BEING STARTED

EQQG001I SUBTASK END TO END ENABLER HAS STARTED

EQQG001I SUBTASK END TO END RECEIVER HAS STARTED

EQQG001I SUBTASK END TO END SENDER HAS STARTED

When the end-to-end server is started, with the properties file customized to enable all EQQPT messages to be issued to the Server MLOG by default, check that these messages appear in the server EQQMLOG:

Messages in the server for active end-to-end scheduling with fault tolerance capabilities

EQQPH33I THE END-TO-END PROCESSES HAVE BEEN STARTED

EQQPT01I Program "/usr/lpp/TWS/TWS820/bin/translator" has been started, 
pid is pid number

EQQPT15I The USS bindir "/usr/lpp/TWS/TWS820" maintenance level
is maintenance level

EQQPT01I Program "/usr/lpp/TWS/TWS820/bin/netman" has been started, pid is pid num

If a Symphony file has been created and is active, these messages will follow:

EQQPT20I Input Translator waiting for Batchman and Mailman are started

EQQPT21I Input Translator finished waiting for Batchman and Mailman

Otherwise, if the Symphony file is not present or a new one must be produced, this message will follow:

EQQPT22I Input Translator thread stopped until new Symphony will be available

The first time that the controller is being started with the fault-tolerant end-to-end scheduling in use or after the event data sets (EQQTWSIN and EQQTWSOU) have been reallocated, the event data sets need to be formatted. The following messages appear in the controller EQQMLOG before the messages about sender and receiver have started:

EQQW030I A DISK DATA SET WILL BE FORMATTED, DDNAME = EQQTWSIN

EQQW030I A DISK DATA SET WILL BE FORMATTED, DDNAME = EQQTWSOU

EQQW038I A DISK DATA SET HAS BEEN FORMATTED, DDNAME = EQQTWSIN

EQQW038I A DISK DATA SET HAS BEEN FORMATTED, DDNAME = EQQTWSOU

Also, the following messages might appear in the server EQQMLOG:

EQQPT56W The /DD:EQQTWSIN queue has not been formatted yet

EQQPT56W The /DD:EQQTWSOU queue has not been formatted yet

If the controller uses the Restart and Clean Up functionality check that the following messages appear in the Controller MLOG:

EQQZ005I OPC SUBTASK FL TASK IS BEING STARTED

EQQZ005I OPC SUBTASK PRE-SUBMIT IS BEING STARTED

EQQFSD1I SYSOUT DATABASE ERROR HANDLER TASK STARTED

EQQFSK1I PRIMARY KEY FILE INITIALIZATION COMPLETED

EQQFSF1I DATA FILE EQQSDF01 INITIALIZATION COMPLETED

EQQFSF1I DATA FILE EQQSDF02 INITIALIZATION COMPLETED

...

EQQFSF1I DATA FILE EQQSDFnn INITIALIZATION COMPLETED

EQQFSI1I SECONDARY KEY FILE INITIALIZATION COMPLETED

EQQFSD5I SYSOUT DATABASE INITIALIZATION COMPLETE

EQQPS01I PRE SUBMITTER TASK INITIALIZATION COMPLETE

EQQFL01I JOBLOG FETCH TASK INITIALIZATION COMPLETE

If the XCF is used to connect with Data Store Following messages should occur:

EQQFCCAI XCF JOIN STARTED

EQQFCC9I XCF XCFCLC02 HAS JOINED XCF GROUP OPCGRPQ

If the SNA is used to connect with Data Store following messages should occur:

EQQFV01I FN APPLICATION STARTED

EQQFV24I ACB SUCCESSFULLY OPENED

EQQFV36I SESSION I9PC45RA-I9PC45AA ESTABLISHED

Figure 24 shows an example of the MLOG for a controller. The controller is connected to three trackers through shared DASD, XCF, and NCF. A standby controller is also started in this configuration.

Figure 24. Sample Message Log for a controller

04/08 12.13.19 EQQZ013I NOW PROCESSING PARAMETER LIBRARY MEMBER CONTROLR
04/08 12.13.19 EQQZ015I INIT STATEMENT: OPCOPTS  OPCHOST(YES)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          APPCTASK(YES)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          RECOVERY(YES)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          RODMTASK(YES) RODMPARM(RODM)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          ERDRTASK(0)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          EWTRTASK(NO)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          GTABLE(JOBCARD)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          NCFTASK(YES)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          NCFAPPL(NCFFN002)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          SERVERS(OSR1,OSR2)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          BUILDSSX(REBUILD)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          VARSUB(SCAN)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          SSCMNAME(EQQSSCMJ,TEMPORARY)
04/08 12.13.19 EQQZ015I INIT STATEMENT:
04/08 12.13.19 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.13.19 EQQZ015I INIT STATEMENT: ALERTS   MLOG(DURATION,ERROROPER,OPCERROR,QLIMEXCEED,RESCONT)
04/08 12.13.19 EQQZ015I INIT STATEMENT:

04/08 12.13.19 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.13.19 EQQZ015I INIT STATEMENT: AUTHDEF  CLASS(IBMOPC) SUBRESOURCES(CP.CPGDDEF LT.LTGDDEF)
04/08 12.13.19 EQQZ015I INIT STATEMENT:
04/08 12.13.19 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.13.19 EQQZ015I INIT STATEMENT: EXITS    CALL00(NO)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          CALL01(NO)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          CALL02(YES)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          CALL03(NO)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          CALL04(NO)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          CALL05(NO)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          CALL06(YES)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          CALL07(NO)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          CALL09(YES)
04/08 12.13.19 EQQZ015I INIT STATEMENT:
04/08 12.13.19 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.13.19 EQQZ015I INIT STATEMENT: ROUTOPTS DASD(SUBCPU1)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          SNA(NCFFN003)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          USER(OS2LAN1,OS2LAN2)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          XCF(SMOPC)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          APPC(ROMEAS1:ITIBM200.S44D1288)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          TCP(ROM2:9.52.52.11)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          TCPIPID(TCPIPROC)
04/08 12.13.19 EQQZ015I INIT STATEMENT:
04/08 12.13.19 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.13.19 EQQZ015I INIT STATEMENT: XCFOPTS  MEMBER(OPC)
04/08 12.13.19 EQQZ015I INIT STATEMENT:          GROUP(PLEXM101)
04/08 12.13.19 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.13.19 EQQZ014I MAXIMUM RETURN CODE FOR PARAMETER MEMBER CONTROLR IS: 0000
04/08 12.13.20 EQQZ013I NOW PROCESSING PARAMETER LIBRARY MEMBER RODM
04/08 12.13.20 EQQZ015I INIT STATEMENT: RODMOPTS RODMSYSTEM(EKGXRODM)
04/08 12.13.20 EQQZ015I INIT STATEMENT:          OPCRESOURCE(TAPE)
04/08 12.13.20 EQQZ015I INIT STATEMENT:          OPCFIELD(QUANTITY)
04/08 12.13.20 EQQZ015I INIT STATEMENT:          RODMCLASS(TAPE)
04/08 12.13.20 EQQZ015I INIT STATEMENT:          RODMFIELD(NUMBEROF)
04/08 12.13.20 EQQZ015I INIT STATEMENT:          RODMLOST(LAST)
04/08 12.13.20 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.13.20 EQQZ014I MAXIMUM RETURN CODE FOR PARAMETER MEMBER RODM
04/08 12.13.21 EQQZ172I SSX BLOCK OF VERSION 09HWSZ200  SUCCESSFULLY BUILT
04/08 12.13.21 EQQZ073I OPC HAS RECOGNIZED THAT THIS IS A JES2 SYSTEM WITH
04/08 12.13.21 EQQZ073I COMMAND CHARACTER $ AND THAT THE NJE NODE NAME IS ROMEMVS
04/08 12.13.22 EQQZ005I OPC SUBTASK VTAM I/O TASK IS BEING STARTED
04/08 12.13.22 EQQZ005I OPC SUBTASK NORMAL MODE MGR IS BEING STARTED
04/08 12.13.22 EQQZ005I OPC SUBTASK TCP/IP TASK IS BEING STARTED
04/08 12.13.22 EQQZ005I OPC SUBTASK APPC TRACKER IS BEING STARTED
04/08 12.13.22 EQQZ005I OPC SUBTASK JOB SUBMIT TASK IS BEING STARTED
04/08 12.13.22 EQQZ005I OPC SUBTASK DATA ROUTER TASK IS BEING STARTED
04/08 12.13.22 EQQZ005I OPC SUBTASK RODM TASK IS BEING STARTED
04/08 12.13.22 EQQZ005I OPC SUBTASK APPC TASK IS BEING STARTED
04/08 12.13.23 EQQV001I NCF APPLICATION STARTED
04/08 12.13.23 EQQZ013I NOW PROCESSING PARAMETER LIBRARY MEMBER CONTROLR
04/08 12.13.23 EQQZ015I INIT STATEMENT: AUDIT    ACCESS(UPDATE) AMOUNT(KEY) FILE(ALL)
04/08 12.13.23 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.13.23 EQQZ015I INIT STATEMENT: AUDIT    ACCESS(UPDATE) AMOUNT(DATA) FILE(JS)
04/08 12.13.23 EQQZ015I INIT STATEMENT:

04/08 12.13.23 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.13.23 EQQZ015I INIT STATEMENT: JTOPTS   BACKUP(NO)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          STATMSG(CPLOCK EVENTS GENSERV)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          ETT(YES)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          HIGHRC(0)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          JOBCHECK(SAME)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          JTLOGS(5)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          OPINFOSCOPE(ALL)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          JOBSUBMIT(YES)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          MAXJSFILE(NO)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          NEWOILIMIT(30)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          OFFDELAY(3)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          PLANSTART(7)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          PRTCOMPLETE(YES)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          DUAL(NO)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          SHUTDOWNPOLICY(75)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          SUBFAILACTION(E)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          SUPPRESSACTION(C)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          SUPPRESSPOLICY(75)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          TRACK(JOBOPT)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          WSFAILURE(ERROR,REROUTE,IMMED)
04/08 12.13.23 EQQZ015I INIT STATEMENT:          WSOFFLINE(ERROR,REROUTE,IMMED)
04/08 12.13.23 EQQZ015I INIT STATEMENT:
04/08 12.13.23 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.13.23 EQQZ015I INIT STATEMENT: NOERROR  LIST(MYJOB.*.STEP4.0002
04/08 12.13.23 EQQZ015I INIT STATEMENT:               HISJOB.*.STEP6.0004
04/08 12.13.23 EQQZ015I INIT STATEMENT:               HERJOB.*.STEP9.0016)
04/08 12.13.23 EQQZ015I INIT STATEMENT:
04/08 12.13.23 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.13.23 EQQZ014I MAXIMUM RETURN CODE FOR PARAMETER MEMBER CONTROLR IS: 0000
04/08 12.13.23 EQQSU12I MAX NUMBER OF WORKSTATIONS CHECKPOINTED BY THIS SUBMIT TASK: 0046
04/08 12.13.23 EQQO001I APPC TASK INITIALIZATION IS COMPLETE
04/08 12.13.23 EQQF007I XCF MEMBER SMOPC HAS JOINED THE GROUP. THE DESTINATION WILL BE
04/08 12.13.23 EQQF007I REPORTED ACTIVE
04/08 12.13.23 EQQF008I XCF MEMBER SBOPC HAS JOINED THE GROUP AS STANDBY FOR THE
04/08 12.13.23 EQQF008I OPC CONTROLLER
04/08 12.13.23 EQQF001I DATA ROUTER TASK INITIALIZATION IS COMPLETE
04/08 12.13.23 EQQTA01I THE TCP/IP COMMUNICATION TASK HAS STARTED
04/08 12.13.24 EQQSU01I THE SUBMIT TASK HAS STARTED
04/08 12.13.24 EQQAT01I THE APPC TRACKER TASK HAS STARTED
04/08 12.13.26 EQQQ502I SPECIAL RESOURCE DATASPACE HAS BEEN CREATED
04/08 12.13.26 EQQQ502I 0000020 PAGES ARE USED FOR 00000100 SPECIAL RESOURCE RECORDS
04/08 12.13.45 EQQN018I VSAM LSR BUFFERS HAVE BEEN SUCCESSFULLY ALLOCATED FOR VSAM FILE EQQCP1DS
04/08 12.13.45 EQQN018I NUMBER OF INDEX BUFFERS ARE 000006 WITH SIZE 016384
04/08 12.13.45 EQQN018I NUMBER OF DATA  BUFFERS ARE 000010 WITH SIZE 032768
04/08 12.13.45 EQQN012I OPC JOB TRACKING EVENTS ARE NOW BEING LOGGED ON FILE EQQJT01
04/08 12.13.45 EQQN013I OPC JOB TRACKING IS NOW ACTIVE AND CURRENT PLAN DD-NAME IS EQQCP1DS
04/08 12.13.45 EQQZ005I OPC SUBTASK EVENT MANAGER IS BEING STARTED
04/08 12.13.45 EQQZ005I OPC SUBTASK GENERAL SERVICE IS BEING STARTED
04/08 12.13.45 EQQZ005I OPC SUBTASK AUTO RECOVERY IS BEING STARTED
04/08 12.13.45 EQQZ005I OPC SUBTASK JT LOG ARCHIVER IS BEING STARTED
04/08 12.13.45 EQQZ005I OPC SUBTASK EXTERNAL ROUTER IS BEING STARTED
04/08 12.13.45 EQQZ005I OPC SUBTASK WS ANALYZER IS BEING STARTED
04/08 12.13.45 EQQN080I THE LOG ARCHIVER TASK HAS STARTED
04/08 12.13.46 EQQZ013I NOW PROCESSING PARAMETER LIBRARY MEMBER STDAR
04/08 12.13.46 EQQZ015I INIT STATEMENT: AROPTS PREDWS(CPU*)
04/08 12.13.46 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.13.46 EQQZ014I MAXIMUM RETURN CODE FOR PARAMETER MEMBER STDAR    IS: 0000
04/08 12.13.46 EQQW505I THE WORK STATION ANALYZER TASK HAS STARTED
04/08 12.13.46 EQQZ085I OPC SUBTASK GS EXECUTOR 01 IS BEING STARTED
04/08 12.13.46 EQQC001I THE AUTOMATIC RECOVERY SUBTASK HAS STARTED

04/08 12.13.46 EQQZ085I OPC SUBTASK GS EXECUTOR 02 IS BEING STARTED
04/08 12.13.46 EQQEX01I THE EXTERNAL ROUTER TASK HAS STARTED
04/08 12.13.46 EQQZ085I OPC SUBTASK GS EXECUTOR 03 IS BEING STARTED
04/08 12.13.46 EQQZ085I OPC SUBTASK GS EXECUTOR 04 IS BEING STARTED
04/08 12.13.46 EQQZ085I OPC SUBTASK GS EXECUTOR 05 IS BEING STARTED
04/08 12.13.46 EQQG001I SUBTASK GENERAL SERVICE HAS STARTED
04/08 12.13.46 EQQE025I THE EVENT MANAGER HAS STARTED
04/08 12.13.46 EQQE017I THE ETT FUNCTION IS ACTIVATED
04/08 12.13.46 EQQG001I SUBTASK GS EXECUTOR 01 HAS STARTED
04/08 12.13.46 EQQG001I SUBTASK GS EXECUTOR 02 HAS STARTED
04/08 12.13.46 EQQG001I SUBTASK GS EXECUTOR 03 HAS STARTED
04/08 12.13.46 EQQG001I SUBTASK GS EXECUTOR 04 HAS STARTED
04/08 12.13.46 EQQG001I SUBTASK GS EXECUTOR 05 HAS STARTED
04/08 12.17.29 EQQV024I ACB SUCCESSFULLY OPENED
04/08 12.17.59 EQQV036I SESSION NCFFN002-NCFFN003 ESTABLISHED
04/08 12.20.35 EQQN051I A CURRENT PLAN BACKUP PROCESS HAS STARTED. TRIGGER WAS: BACKUP CMD
04/08 12.20.35 EQQN012I OPC JOB TRACKING EVENTS ARE NOW BEING LOGGED ON FILE EQQJT02
04/08 12.20.35 EQQQ507I A SPECIAL RESOURCE DATASPACE BACKUP PROCESS HAS STARTED
04/08 12.20.35 EQQQ508I A SPECIAL RESOURCE DATASPACE BACKUP PROCESS HAS ENDED
04/08 12.20.35 EQQQ508I 00000003 RECORDS WERE WRITTEN TO CX
04/08 12.20.38 EQQN056I A CURRENT PLAN COPY PROCESS HAS STARTED
04/08 12.20.40 EQQN057I A CURRENT PLAN DATA SET WAS SUCCESSFULLY COPIED: FROMDD=EQQCP1DS, TODD=EQQCP2DS
04/08 12.20.40 EQQN023I VSAM LSR BUFFERS HAVE BEEN SUCCESSFULLY DELETED FOR VSAM FILE EQQCP2DS
04/08 12.20.41 EQQN018I VSAM LSR BUFFERS HAVE BEEN SUCCESSFULLY ALLOCATED FOR VSAM FILE EQQCP2DS
04/08 12.20.41 EQQN018I NUMBER OF INDEX BUFFERS ARE 000006 WITH SIZE 016384
04/08 12.20.41 EQQN018I NUMBER OF DATA  BUFFERS ARE 000010 WITH SIZE 032768
04/08 12.20.41 EQQN090I THE JOB TRACKING LOG DATA SET DEFINED BY DDNAME EQQJT01  HAS BEEN
04/08 12.20.41 EQQN090I COPIED TO THE JOB TRACKING LOG ARCHIVE DATA SET
04/08 12.20.57 EQQZ000I A STOP OPC COMMAND HAS BEEN RECEIVED
04/08 12.20.57 EQQN000I THE NORMAL MODE MANAGER TASK HAS BEEN REQUESTED TO TERMINATE
04/08 12.20.57 EQQSU02I THE SUBMIT TASK HAS ENDED
04/08 12.20.57 EQQEX02I THE EXTERNAL ROUTER TASK HAS ENDED
04/08 12.20.57 EQQZ034I OPC SUBTASK DATA ROUTER TASK HAS ENDED.
04/08 12.20.57 EQQZ034I SUBTASK WAS ACTIVE      453 SECONDS AND USED      0.1 CPU SECONDS
04/08 12.20.57 EQQZ034I OPC SUBTASK APPC TASK HAS ENDED.
04/08 12.20.57 EQQZ034I SUBTASK WAS ACTIVE      453 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.20.57 EQQZ034I OPC SUBTASK JOB SUBMIT TASK HAS ENDED.
04/08 12.20.57 EQQZ034I SUBTASK WAS ACTIVE      453 SECONDS AND USED      0.1 CPU SECONDS
04/08 12.20.57 EQQE000I TOTAL NUMBER OF EVENTS PROCESSED BY THE EVENT MANAGER TASK IS:      34
04/08 12.20.57 EQQE000I NUMBER OF EVENTS SINCE THE PREVIOUS MESSAGE IS:                     34
04/08 12.20.57 EQQE000I EVENT MANAGER QUEUE LENGTH STATISTICS FOLLOW:
04/08 12.20.57 EQQE000I  TOTAL     Q1     Q2     Q5    Q10    Q20    Q50   Q100   >100
04/08 12.20.57 EQQE000I     31     28      2      1      0      0      0      0      0
04/08 12.20.57 EQQE006I EVENT MANAGER EVENT TYPE STATISTICS FOLLOW:
04/08 12.20.57 EQQE006I TYPE     NTOT    NNEW     TTOT     TNEW     TAVG    NAVG     NSUS
04/08 12.20.57 EQQE007I ALL        34      34      0.2      0.2     0.00    0.00        0
04/08 12.20.57 EQQE007I 1           3       3      0.0      0.0     0.03    0.03        0
04/08 12.20.57 EQQE007I 2           3       3      0.0      0.0     0.02    0.02        0
04/08 12.20.57 EQQE007I 3S          0       0      0.0      0.0     0.00    0.00        0
04/08 12.20.57 EQQE007I 3J          4       4      0.0      0.0     0.00    0.00        0
04/08 12.20.57 EQQE007I 3P          4       4      0.1      0.1     0.02    0.02        0
04/08 12.20.57 EQQE007I 4           0       0      0.0      0.0     0.00    0.00        0
04/08 12.20.57 EQQE007I 5          12      12      0.0      0.0     0.00    0.00        0
04/08 12.20.57 EQQE007I USER        0       0      0.0      0.0     0.00    0.00        0
04/08 12.20.57 EQQE007I CATM        0       0      0.0      0.0     0.00    0.00        0
04/08 12.20.57 EQQE007I OTHR        8       8      0.0      0.0     0.00    0.00        0
04/08 12.20.57 EQQE004I CP ENQ LOCK STATISTICS SINCE PREVIOUS MESSAGE FOLLOW:
04/08 12.20.57 EQQE004I NAME               NEXCL  NSHRD  THELD  TWAIT    AHELD   AWAIT
04/08 12.20.57 EQQE005I NORMAL MODE MGR       18      0    7.0    0.0     0.39    0.00
04/08 12.20.57 EQQE005I WS ANALYZER            7      0    0.7    0.1     0.10    0.02
04/08 12.20.57 EQQE005I EVENT MANAGER         31      0    0.2    5.6     0.00    0.18

04/08 12.20.57 EQQV037I SESSION NCFFN002-NCFFN003 ENDED
04/08 12.20.57 EQQC003I THE AUTOMATIC RECOVERY SUBTASK HAS ENDED NORMALLY
04/08 12.20.57 EQQTA02I THE TCP/IP COMMUNICATION TASK HAS ENDED
04/08 12.20.57 EQQAT01I THE APPC TRACKER TASK HAS ENDED
04/08 12.20.57 EQQG010I GENERAL SERVICE REQUEST STATISTICS FOLLOW:
04/08 12.20.57 EQQG010I TYPE       TOTAL   NEWRQS   TOTTIME   NEWTIME    TOTAVG   NEWAVG
04/08 12.20.57 EQQG011I ALL            0        0       0.0       0.0      0.00     0.00
04/08 12.20.57 EQQV020I ACB SUCCESSFULLY CLOSED
04/08 12.20.57 EQQZ034I OPC SUBTASK EXTERNAL ROUTER HAS ENDED.
04/08 12.20.57 EQQZ034I SUBTASK WAS ACTIVE      431 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.20.57 EQQE023I THE EVENT MANAGER ENDED NORMALLY
04/08 12.20.57 EQQW503I THE WORK STATION ANALYZER ENDED NORMALLY
04/08 12.20.57 EQQG003I SUBTASK GS EXECUTOR 01 HAS ENDED
04/08 12.20.57 EQQG003I SUBTASK GS EXECUTOR 02 HAS ENDED
04/08 12.20.57 EQQV006I NCF APPLICATION ENDED
04/08 12.20.57 EQQZ034I OPC SUBTASK AUTO RECOVERY HAS ENDED.
04/08 12.20.57 EQQZ034I SUBTASK WAS ACTIVE      431 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.20.57 EQQZ034I OPC SUBTASK TCP/IP TASK HAS ENDED.
04/08 12.20.57 EQQZ034I SUBTASK WAS ACTIVE      431 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.20.57 EQQZ034I OPC SUBTASK APPC TRACKER HAS ENDED.
04/08 12.20.57 EQQZ034I SUBTASK WAS ACTIVE      431 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.20.57 EQQG003I SUBTASK GS EXECUTOR 03 HAS ENDED
04/08 12.20.57 EQQG003I SUBTASK GS EXECUTOR 04 HAS ENDED
04/08 12.20.57 EQQG003I SUBTASK GS EXECUTOR 05 HAS ENDED
04/08 12.20.57 EQQE018I THE ETT FUNCTION IS DEACTIVATED
04/08 12.20.57 EQQZ034I OPC SUBTASK VTAM I/O TASK HAS ENDED.
04/08 12.20.57 EQQZ034I SUBTASK WAS ACTIVE      454 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.20.57 EQQZ034I OPC SUBTASK WS ANALYZER HAS ENDED.
04/08 12.20.57 EQQZ034I SUBTASK WAS ACTIVE      431 SECONDS AND USED      0.4 CPU SECONDS
04/08 12.20.57 EQQZ034I OPC SUBTASK EVENT MANAGER HAS ENDED.
04/08 12.20.57 EQQZ034I SUBTASK WAS ACTIVE      431 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.21.03 EQQZ034I OPC SUBTASK GS EXECUTOR 01 HAS ENDED.
04/08 12.21.03 EQQZ034I SUBTASK WAS ACTIVE      431 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.21.03 EQQZ034I OPC SUBTASK GS EXECUTOR 02 HAS ENDED.
04/08 12.21.03 EQQZ034I SUBTASK WAS ACTIVE      431 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.21.03 EQQZ034I OPC SUBTASK GS EXECUTOR 03 HAS ENDED.
04/08 12.21.03 EQQZ034I SUBTASK WAS ACTIVE      431 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.21.03 EQQZ034I OPC SUBTASK GS EXECUTOR 04 HAS ENDED.
04/08 12.21.03 EQQZ034I SUBTASK WAS ACTIVE      431 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.21.03 EQQZ034I OPC SUBTASK GS EXECUTOR 05 HAS ENDED.
04/08 12.21.03 EQQZ034I SUBTASK WAS ACTIVE      431 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.21.03 EQQG003I SUBTASK GENERAL SERVICE HAS ENDED
04/08 12.21.03 EQQZ034I OPC SUBTASK GENERAL SERVICE HAS ENDED.
04/08 12.21.03 EQQZ034I SUBTASK WAS ACTIVE      437 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.21.05 EQQN081I THE LOG ARCHIVER TASK HAS ENDED
04/08 12.21.05 EQQZ034I OPC SUBTASK JT LOG ARCHIVER HAS ENDED.
04/08 12.21.05 EQQZ034I SUBTASK WAS ACTIVE      439 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.21.05 EQQN107I THE NORMAL MODE MANAGER TASK HAS ENDED
04/08 12.21.05 EQQZ034I OPC SUBTASK NORMAL MODE MGR HAS ENDED.
04/08 12.21.05 EQQZ034I SUBTASK WAS ACTIVE      461 SECONDS AND USED      7.0 CPU SECONDS
04/08 12.21.06 EQQZ173I SSX BLOCK OF VERSION 09HWSZ200 SUCCESSFULLY RESTORED
04/08 12.21.08 EQQZ006I NO ACTIVE OPC SUBTASKS. OPC IS ENDING

Tracker message log

Look for these messages in the message log of each tracker:

Active data-router-task messages

EQQZ005I OPC SUBTASK DATA ROUTER TASK IS BEING STARTED
EQQF001I DATA ROUTER TASK INITIALIZATION IS COMPLETE

Active submit-task messages

EQQZ005I OPC SUBTASK JOB SUBMIT TASK IS BEING STARTED
EQQSU01I THE SUBMIT TASK HAS STARTED

Also, verify that the tracker has started an event writer. You should see these messages:

Active event-writer messages

EQQZ005I OPC SUBTASK EVENT WRITER IS BEING STARTED
EQQW065I EVENT WRITER STARTED

If the tracker forwards events to the controller, ensure that an event-reader function is specified. This can be a separate event-reader task or an event writer that has been started with the EWSEQNO keyword. In some configurations, both functions can be started in a tracker.

Although no messages are issued if you use EWSEQNO to start the reader function, check that EWSEQNO appears on the EWTROPTS statement and that the return code for this statement is 0.
If you have specified a separate event-reader function, check that these messages appear:
Active event-reader messages
```
EQQZ005I OPC SUBTASK EVENT READER IS BEING STARTED
EQQR025I ERDR 01 STARTED
```
The numeric value on message EQQR025I indicates which event reader is being started. The same value cannot be specified on EWSEQNO and ERSEQNO keywords at the same node, and no more than 16 reader tasks can be specified at this node.

Note:

If the tracker uses an XCF connection, no messages appear in the tracker message log unless an error has occurred. To verify XCF connection messages, check the message log of the controller.

If the tracker uses an NCF connection, check that these messages appear (where NCFTRK01 and NCFCON01 represent the VTAM application IDs of the tracker and controller):

Active NCF-connection messages

EQQZ005I OPC SUBTASK VTAM I/O TASK IS BEING STARTED
EQQV001I NCF APPLICATION STARTED
EQQV024I ACB SUCCESSFULLY OPENED
EQQV036I SESSION NCFTRK01-NCFCON01 ESTABLISHED
EQQV040I CURRENTLY RUNNING WITH 'NCFCON01' AS CONTROLLER

Figure 25 shows an example of the MLOG for a tracker. The tracker is connected to the controller via a VTAM link. The VTAM application IDs are NCFTRK01 for the tracker and NCFCON01 for the controller. The controller is active.

Figure 25. Sample message log for a tracker

04/08 12.14.08 EQQZ013I NOW PROCESSING PARAMETER LIBRARY MEMBER TRKV
04/08 12.14.08 EQQZ015I INIT STATEMENT: OPCOPTS  OPCHOST(NO)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          NCFTASK(YES)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          NCFAPPL(NCFFN003)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          JCCTASK(NO)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          EWTRTASK(YES)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          EWTRPARM(WTRPARMS)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          ERDRTASK(0)

04/08 12.14.08 EQQZ015I INIT STATEMENT:          SSCMNAME(EQQSSCMJ,TEMPORARY)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          BUILDSSX(REBUILD)
04/08 12.14.08 EQQZ015I INIT STATEMENT:
04/08 12.14.08 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.14.08 EQQZ015I INIT STATEMENT: JOBOPTS  CHSMWAIT(1)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          JOBLOGRETRIEVAL(DELAYED)
04/08 12.14.08 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.14.08 EQQZ015I INIT STATEMENT: AUTHDEF  CLASS(IBMOPC) SUBRESOURCES(RL.WSNAME SR.SRNAME)
04/08 12.14.08 EQQZ015I INIT STATEMENT:
04/08 12.14.08 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.14.08 EQQZ015I INIT STATEMENT: EXITS    CALL00(NO)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          CALL01(NO)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          CALL02(NO)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          CALL03(NO)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          CALL04(NO)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          CALL05(NO)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          CALL06(NO)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          CALL07(NO)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          CALL09(NO)
04/08 12.14.08 EQQZ015I INIT STATEMENT:
04/08 12.14.08 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.14.08 EQQZ015I INIT STATEMENT: TRROPTS  HOSTCON(SNA)
04/08 12.14.08 EQQZ015I INIT STATEMENT:          SNAHOST(NCFFN002)
04/08 12.14.08 EQQZ015I INIT STATEMENT:
04/08 12.14.08 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.14.08 EQQZ014I MAXIMUM RETURN CODE FOR PARAMETER MEMBER TRKV     IS: 0000
04/08 12.14.08 EQQZ172I SSX BLOCK OF VERSION 09HWSZ200 SUCCESSFULLY BUILT
04/08 12.14.08 EQQZ073I OPC HAS RECOGNIZED THAT THIS IS A JES2 SYSTEM WITH
04/08 12.14.08 EQQZ073I COMMAND CHARACTER $ AND THAT THE NJE NODE NAME IS ROMEMVS
04/08 12.14.08 EQQZ005I OPC SUBTASK EVENT WRITER IS BEING STARTED
04/08 12.14.08 EQQZ005I OPC SUBTASK VTAM I/O TASK IS BEING STARTED
04/08 12.14.08 EQQZ005I OPC SUBTASK JOB SUBMIT TASK IS BEING STARTED
04/08 12.14.08 EQQZ005I OPC SUBTASK DATA ROUTER TASK IS BEING STARTED
04/08 12.14.09 EQQZ013I NOW PROCESSING PARAMETER LIBRARY MEMBER WTRPARMS
04/08 12.14.09 EQQZ015I INIT STATEMENT: EWTROPTS   HOLDJOB(USER)
04/08 12.14.09 EQQZ015I INIT STATEMENT:            EWWAIT(7)
04/08 12.14.09 EQQZ015I INIT STATEMENT:            SUREL(NO)
04/08 12.14.09 EQQZ015I INIT STATEMENT:            EWSEQNO(01)
04/08 12.14.09 EQQZ015I INIT STATEMENT:            STEPEVENTS(NZERO)
04/08 12.14.09 EQQZ015I INIT STATEMENT:            RETCODE(HIGHEST)

04/08 12.14.09 EQQZ016I RETURN CODE FOR THIS STATEMENT IS: 0000
04/08 12.14.09 EQQZ014I MAXIMUM RETURN CODE FOR PARAMETER MEMBER WTRPARMS IS: 0000
04/08 12.14.09 EQQZ064I OPC WILL USE THE NJE NODE NAME ROMEMVS FOR JOBS HELD ON THIS NODE
04/08 12.14.09 EQQV001I NCF APPLICATION STARTED
04/08 12.14.09 EQQZ065I OPC WILL RELEASE HELD JOBS USING THE JES2 COMMAND CHARACTER $
04/08 12.14.09 EQQW026I THE JOB COMPLETION CHECKER STARTED
04/08 12.14.09 EQQF001I DATA ROUTER TASK INITIALIZATION IS COMPLETE
04/08 12.14.09 EQQSU12I MAX NUMBER OF WORKSTATIONS CHECKPOINTED BY THIS SUBMIT TASK: 0046
04/08 12.14.09 EQQSU01I THE SUBMIT TASK HAS STARTED
04/08 12.14.14 EQQW065I EVENT WRITER STARTED
04/08 12.15.59 EQQV033E ACB OPEN FAILED FOR THE LAST 2 MINUTES - NCF APPLICATION NOT ACTIVE
04/08 12.17.49 EQQV024I ACB SUCCESSFULLY OPENED
04/08 12.17.59 EQQV036I SESSION NCFFN003-NCFFN002 ESTABLISHED
04/08 12.18.09 EQQV040I CURRENTLY RUNNING WITH 'NCFFN002' AS CONTROLLER
04/08 12.22.23 EQQZ000I A STOP OPC COMMAND HAS BEEN RECEIVED
04/08 12.22.23 EQQW011I THE EVENT WRITER ENDED NORMALLY
04/08 12.22.23 EQQV037I SESSION NCFFN003-NCFFN002 ENDED
04/08 12.22.23 EQQSU02I THE SUBMIT TASK HAS ENDED
04/08 12.22.23 EQQZ034I OPC SUBTASK DATA ROUTER TASK HAS ENDED.
04/08 12.22.23 EQQZ034I SUBTASK WAS ACTIVE      494 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.22.23 EQQZ034I SUBTASK WAS ACTIVE      494 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.22.23 EQQZ034I OPC SUBTASK EVENT WRITER HAS ENDED.
04/08 12.22.23 EQQZ034I SUBTASK WAS ACTIVE      494 SECONDS AND USED      0.1 CPU SECONDS
04/08 12.22.23 EQQZ034I OPC SUBTASK JOB SUBMIT TASK HAS ENDED.
04/08 12.22.23 EQQZ034I SUBTASK WAS ACTIVE      494 SECONDS AND USED      0.2 CPU SECONDS
04/08 12.22.27 EQQV020I ACB SUCCESSFULLY CLOSED
04/08 12.22.27 EQQV006I NCF APPLICATION ENDED
04/08 12.22.27 EQQZ034I OPC SUBTASK VTAM I/O TASK HAS ENDED.
04/08 12.22.27 EQQZ034I SUBTASK WAS ACTIVE      498 SECONDS AND USED      0.0 CPU SECONDS
04/08 12.22.28 EQQZ173I SSX BLOCK OF VERSION 09HWSZ200 SUCCESSFULLY RESTORED
04/08 12.22.30 EQQZ006I NO ACTIVE OPC SUBTASKS. OPC IS ENDING