TERMINAL definition statement

The TERMINAL definition statement defines BSC and start-stop devices attached to the NCP.

The following items are NCP-only operands that should be looked at carefully for VTAM® restrictions. See NCP, SSP, and EP Resource Definition Reference for information about coding these operands.

ADDR
CONV
DIRECTN

Table 1. NCP major node statements and operands
Name	Definition statement	Operands	Page	Req	Sift effect	Default	Restrictions, dependencies
name	PCCU	AUTODMP	AUTODMP			NO	DUMPDS
		AUTOIPL	AUTOIPL			NO
		AUTOSYN	AUTOSYN			YES
		BACKUP	BACKUP			NO	OWNER
		CDUMPDS	CDUMPDS			DUMPDS value
		CHANCON	CHANCON			COND
		CONFGDS	CONFGDS
		CONFGPW	CONFGPW				CONFGDS
		CUADDR	CUADDR
		DELAY	DELAY			0
		DUMPDS	DUMPDS
		DUMPLD	DUMPLD			NO
		DUMPSTA	DUMPSTA
		GWCTL	GWCTL			SHR	SNI only
		INITEST	INITEST			NO	3705 only
		LOADFROM	LOADFROM			HOST	see description
		LOADSTA	LOADSTA
		MAXDATA	MAXDATA			65535
		MDUMPDS	MDUMPDS			DUMPDS value
		NETID	NETID				see description
		NEWPATH	NEWPATH
		OWNER	OWNER				VTAM
		RNAME	RNAME
		SAVEMOD	SAVEMOD			NO	3720 or 3745
		SUBAREA	SUBAREA
		TGN	TGN			1 (Subarea) ANY (APPN)
		VFYC	VFYC			YES
		VFYLM	VFYLM			NO

name	BUILD	LOADLIB	LOADLIB	R
		NETID	NETID				XNETALS
		SUBAREA	SUBAREA	R			VTAM & NCP
		COSTAB	COSTAB			ISTSDCOS
		MAXSUBA	MAXSUBA				Required if PRE-ENA node in network VTAM & NCP
		NEWNAME	NEWNAME
		PUNAME	PUNAME
		SALIMIT	SALIMIT			255
		VTAMTOPO	VTAMTOPO			REPORT	DIAL=YES

name	SYSCNTRL	See the NCP, SSP, and EP Resource Definition Reference for operand details.

name	HOST	INBFRS	INBFRS	R
		MAXBFRU	MAXBFRU	R
		NETID	NETID
		SUBAREA	SUBAREA			1

name	LUDRPOOL	See the NCP, SSP, and EP Resource Definition Reference for operand details.

name	PUDRPOOL	See the NCP, SSP, and EP Resource Definition Reference for operand details.

name	NETWORK	NETID	NETID	R			SNI only; COPIES
		SUBAREA	SUBAREA	R			SNI only
		COPIES	COPIES				SNI only; NETID
		COSTAB	COSTAB			ISTSDCOS	SNI only
		MAXSUBA	MAXSUBA				For pre-ENA; SNI only; VTAM & NCP
		SALIMIT	SALIMIT			255	SNI only

name	FRSESET	SUBPORTS	SUBPORTS	R			VTAM & NCP; PU type 1

name	GWNAU	See the NCP, SSP, and EP Resource Definition Reference for operand details.

name	GROUP	LNCTL	LNCTL	R			VTAM & NCP
		DIAL	DIAL			NO	VTAM & NCP
		DYNPU	DYNPU			NO
		DYNPUPFX	DYNPUPFX			CN	DYNPU=YES
		DYNVNPFX	DYNVNPFX				VNGROUP
		ECLTYPE	ECLTYPE				VTAM & NCP
		ENCR	ENCR		G,L,P	NONE	VTAM
		ENCRTYPE	ENCRTYPE		G,L,P	DES
		FRELAY	FRELAY				VTAM & NCP; PU type 1
		PHYSRSC	PHYSRSC
		PUTYPE	PUTYPE			5	VTAM & NCP
		SHM	SHM			NO	VTAM
		VTAMTOPO	VTAMTOPO				DIAL=YES

name	LINE	ANSWER	ANSWER		G	ON	VTAM
		AUTO	AUTO		G		VTAM & NCP
		AUTODL	AUTODL		G	YES	VTAM & NCP
		BUFCAP	BUFCAP		G	1	VTAM
		CALL	CALL		G	IN	VTAM, NCP, & DIAL=YES
		CKEYNAME	CKEYNAME				VTAM
		ENCR	ENCR		G,L,P	NONE	VTAM
		ENCRTYPE	ENCRTYPE		G,L,P	DES
		ISTATUS	ISTATUS		G	ACTIVE	VTAM
		LINEAUT	LINEAUT		G		VTAM & NCP
		LOCADD	LOCADD				VTAM & NCP
		POLIMIT	POLIMIT		G	(1,NOWAIT)	VTAM & NCP
		PU	PU		G	YES	VTAM
		SWNORDER	SWNORDER		G	CPNAME, FIRST	VTAM
		TERM	TERM		G		VTAM & NCP
		USE	USE		G		VTAM & NCP USE=REDEF USE=SPARE
		VNGROUP	VNGROUP		G		VNNAME; VTAM only ECLTYPE=PHYSICAL
		VNNAME	VNNAME		G		VNGROUP; VTAM only ECLTYPE=PHYSICAL
		VTAMTOPO	VTAMTOPO		G		DIAL=YES

name	PU	ADDR	ADDR				VTAM & NCP; DLCI
		ANS	ANS		G,L	STOP	VTAM & NCP
		AUTHLEN	AUTHLEN		G,L	YES	Type 2.1
		CAPACITY	CAPACITY		G,L	8K or 4M	APPN only
		CONNTYPE	CONNTYPE		G,L	CONNTYPE start option	APPN only
		COSTBYTE	COSTBYTE		G,L	0	APPN only
		COSTTIME	COSTTIME		G,L	0	APPN only
		CPCP	CPCP		G,L	CPCP start option	APPN only
		CPNAME	CPNAME
		DATMODE	DATMODE		G,L	HALF	VTAM & NCP
		DISCNT	DISCNT		G,L	(NO)	VTAM
		DLCI	DLCI				VTAM & NCP; ADDR
		DYNADJCP	DYNADJCP		G,L	DYNADJCP start option	APPN only CPNAME
		DYNLU	DYNLU		G,L	DYNLU start option	PUTYPE=1, 2; VTAM
		ENCR	ENCR		G,L,P	NONE	VTAM
		ENCRTYPE	ENCRTYPE		G,L,P	DES
		GP3174	GP3174		G,L	NO	VTAM & NCP
		HPR	HPR		G,L	YES	VTAM; APPN only; NCP V7R3
		INCLUD0E	INCLUD0E			NO
		INNPORT	INNPORT			NO	VTAM
		ISTATUS	ISTATUS		G	ACTIVE	VTAM
		LIMRES	LIMRES		G,L	NO	VTAM; LIMQSINT; LU 6.2; PUTYPE=1, 2
		LLERP	LLERP			see description	VTAM; HPR=YES
		LMODADR	LMODADR			see description	VTAM & NCP LPDATS; SEGMENT
		LPDA	LPDA			ALLOW	VTAM & NCP
		LUGROUP	LUGROUP				VTAM
		LUSEED	LUSEED				VTAM
		NATIVE	NATIVE		G,L		BN=YES APPN only
		NETID	NETID				VTAM & NCP
		NN	NN		G,L		APPN only
		OWNER	OWNER		G,L		VTAM only; PUTYPE=1 or 2
		PDELAY	PDELAY		G,L	NEGLIGIB or TERRESTR	APPN only
		PUDR	PUDR		G,L		VTAM & NCP
		PUTYPE	PUTYPE		G,L	5	VTAM & NCP
		RETRIES	RETRIES		G,L		VTAM & NCP
		SECNET	SECNET		L	NO	VTAM
		SECURITY	SECURITY		G,L	UNSECURE	APPN only
		SEGMENT	SEGMENT				VTAM & NCP
		TGN	TGN				VTAM & NCP
		TGP	TGP		G,L		APPN only
		TOPO	TOPO			CONNECT	APPN only
		UPARM1	UPARM1		G,L	128	APPN only
		UPARM2	UPARM2		G,L	128	APPN only
		UPARM3	UPARM3		G,L	128	APPN only
		VERALSID	VERALSID		G,L	NO	APPN only
		XID	XID		G,L	NO	VTAM & NCP
		XNETALS	XNETALS			XNETALS start option value

name	LU	LOCADDR	LOCADDR	R			VTAM & NCP
		ASLENT	ASLENT		G,L,P		ASLTAB; VTAM
		ASLTAB	ASLTAB		G,L,P		VTAM
		CERTIFY	CERTIFY		G,L,P	NO
		CKEYNAME	CKEYNAME				VTAM
		CLRSESSQ	CLRSESSQ		G,L,P	NO	VTAM
		DLOGMOD	DLOGMOD		G,L,P		VTAM
		ENCR	ENCR		G,L,P	NONE	VTAM
		ENCRTYPE	ENCRTYPE		G,L,P	DES
		FASTPASS	FASTPASS		G,L,P	YES	VTAM; TSO
		FEATUR2	FEATUR2		G,L,P	(MODEL1, NOEDATS, NOPRINTR, NOSELPEN)	VTAM
		ISTATUS	ISTATUS		G	ACTIVE	VTAM
		LOGAPPL	LOGAPPL		G,L,P		VTAM
		LOGTAB	LOGTAB		G,L,P		VTAM; dependent LUs
		LUDR	LUDR		G,L,P	YES	VTAM & NCP
		MAXSESS	MAXSESS		G,L,P		VTAM & NCP Independent LUs only
		MDLENT	MDLENT		G,L,P		VTAM; MDLTAB
		MDLTAB	MDLTAB		G,L,P		VTAM
		MODETAB	MODETAB		G,L,P	ISTINCLM	VTAM
		PACING	PACING		G,L,P	(1,1,ADAP)	VTAM & NCP
		REGISTER	REGISTER		P	see description	APPN only
		RESETLU	RESETLU		P	YES
		RESSCB	RESSCB			0	VTAM & NCP
		SSCPFM	SSCPFM		G,L,P	FSS	VTAM
		TERM	TERM		P
		USSTAB	USSTAB		G,L,P	ISTINCDT	VTAM; dependent LUs
		VPACING	VPACING		G,L,P	(2,1,ADAP)	VTAM

name	CLUSTER	GPOLL	GPOLL				VTAM & NCP
		ISTATUS	ISTATUS		G	ACTIVE	VTAM

name	TERMINAL	TERM	TERM	R	G,L,C		VTAM & NCP
		ASLENT	ASLENT		G,L,C		ASLTAB
		ASLTAB	ASLTAB		G,L,C
		BHSET	BHSET		G,L,C		VTAM & NCP
		DLOGMOD	DLOGMOD		G,L,C		VTAM; MODETAB
		FEATUR2	FEATUR2		G,L,C	(MODEL1, NOEDATS, NOPRINTR, NOSELPEN)	VTAM
		ISTATUS	ISTATUS		G	ACTIVE	VTAM
		LOGAPPL	LOGAPPL		G,L,C		VTAM; NetView® or TSO
		LOGTAB	LOGTAB		G,L,C		dependent LUs
		MDLENT	MDLENT		G,L,C		MDLTAB
		MDLTAB	MDLTAB		G,L,C
		MODETAB	MODETAB		G,L,C	ISTINCLM
		SSCPFM	SSCPFM		G,L,C	FSS
		USSTAB	USSTAB		G,L,C	ISTINCDT	dependent LUs
Legend: R Required operand. G Code this operand on the higher-level GROUP definition statement to take advantage of the sift effect, or code it on this definition statement. L Code this operand on the higher-level LINE definition statement to take advantage of the sift effect, or code it on this definition statement. P Code this operand on the higher-level PU definition statement to take advantage of the sift effect, or code it on this definition statement. C Code this operand on the higher-level CLUSTER definition statement to take advantage of the sift effect, or code it on this definition statement.