If you are migrating to a z990, z890, z9 EC, z9 BC, z10 EC, z10 BC, or z196 server from a CCF system, follow this procedure.

Assumptions are:

1. You used PPINIT to initialize your CKDS and PKDS.
2. You have not changed your master key since running PPINIT.
3. You are migrating to a z990, z890, z9 EC, z9 BC, z10 EC, z10 BC, or z196 from a CCF system and using the same CKDS and PKDS from assumption number 1.

The procedure is as follows:

• Access the primary menu panel and select option 6, PPINIT. The Pass Phrase MK/KDS Initialization panel appears.
  Notes:

  1. Panel CSFPMC30 appears if you are running on a z9, z10, or z196 server with the Nov. 2008 or later licensed internal code (LIC).
  2. Panel CSFPMC40 appears if you are running on a z196 server with the Sept. 2010 or later LIC.
• Select the 'Reinitialize system' action and enter the same pass phrase from assumption number 1 and the same CKDS and PKDS.
  Figure 28. ICSF Pass Phrase MK/CKDS/PKDS Initialization Panel

   CSFPMC10 ------- ICSF - Pass Phrase MK/CKDS/PKDS Initialization ---
   Command ===>
   Enter your pass phrase (16 to 64 characters)
     ===>
  
   Select one of the initialization actions then press ENTER to process.
  
  _ Initialize system - Load the DES and asymmetric master keys to all
      coprocesors and initialize the CKDS and the PKDS.  
      CKDS ===>
      PKDS ===>
  
  s Reinitialize system - Load the DES and asymmetric master keys to all
      coprocesors and make the specified CKDS and the PKDS the current key data
      sets. 
      CKDS ===>
      PKDS ===>
  
  
   _ Add coprocessors - Initialize additional online coprocessors with the 
     same DES and asymmetric master keys.
  
  
   Press ENTER to process.
   Press END   to exit to the previous menu.
  
   

• Press ENTER to run the utility
• When the utility has completed successfully, press END to return to the primary menu.