When you restore the entire system, the i5/OS correctly establishes the receiver chains when the journals and journal receivers are the restored. You can use the OPTION(*APYJRNCHG) on the Start Recovery using BRM (STRRCYBRM) command to assist you in apply changes to the journaled objects in user libraries. See Recovery with Apply Journal Changes for additional information about using BRMS to assist you in applying journaled changes.
**************************************************************************************************** STEP 023 : Apply Journal Changes Start date/time __________________ Stop date/time __________________ Duration _________________ To determine if you need to apply journal changes, refer to the section "Determining Whether You Need to Apply Journaled Changes" under chapter "Restoring Changed Objects and Applying Journaled Changes" as detailed in the "Recovering your system" topic. --- Attention ------------------------------------------------------- The recovery includes objects saved with pending changes. You must apply journal changes for these objects to be usable. --------------------------------------------------------------------- Use one of the following commands to specify journals for applying journal changes. STRRCYBRM OPTION(*APYJRNCHG) JRN(*JRNLST) STRRCYBRM OPTION(*APYJRNCHG) JRN((library-name/journal-name) (library-name/journal-name) ... ) Type your command choice then press "Enter". __ Select Option 1=Apply journal changes on the Work with Journals using BRMS display for those journals you want to apply changes. __ Select F16=Apply changes on the Apply Journal Changes using BRMS display to confirm your decision to apply the journal changes. --- Attention ------------------------------------------------------- Changes will be applied to the journaled objects of the selected journals for the journal receivers currently on the system. --------------------------------------------------------------------- --- Attention ------------------------------------------------------- If you are applying changes to journals on auxiliary storage pool devices, you must set the auxiliary storage pool device to the current job before applying changes. To do so, type the following command then press "Enter". SETASPGRP ASPGRP(primary-auxiliarystorage-pool) --------------------------------------------------------------------- ****************************************************************************************************