If you used values other than default values on the BRMS device and media library information displays, you should verify that your changes are still in effect. You can do this using the Work with Devices (WRKDEVBRM) command.
**************************************************************************************************** STEP 008 : Initialize BRMS Device and Media Library Information Start date/time __________________ Stop date/time __________________ Duration _________________ You must initialize the BRMS device and media library information. Clear and initialize the BRMS device and media library information with the tape and media library devices currently configured on the system. To do so, type the following command then press "Enter". INZBRM OPTION(*DEVICE) --- Attention ------------------------------------------------------- INZBRM OPTION(*DEVICE) resets some device information to the BRMS supplied defaults. --------------------------------------------------------------------- Review the BRMS device information. To do so, type the following command then press "Enter". WRKDEVBRM Update the BRMS device information with any changes necessary before continuing with the recovery. ****************************************************************************************************