Explanation
CF request time ordering is required for operations
to this coupling facility; however the timing characteristics of
the coupling facility are not consistent with timing characteristics
of the z/OS® system. The coupling
facility is identified by the node descriptor. See mapping macro
IXLYNDE. The reason why that CF request time ordering will not be
enabled is described in the message text.
- text
- text is
COUPLING FACILITY type.mfg.plant.sequence
PARTITION: partition side CPCID: cpcid
- type
- Node type (See ndetype in IXLYNDE).
- mfg
- Node manufacturer ID (See ndemfg in IXLYNDE).
- plant
- Node manufacturer plant ID (See ndeplant in IXLYNDE).
- sequence
- Node sequence number (See ndesequence in IXLYNDE).
- partition
- Node LPAR partition number (See ndepartition in IXLYNDE).
- side
- The node PP/SI mode indicator and configuration code from the
IXLYNDE are used to determine the value for side.
Value and meaning are:
- SIDE: 0 means that the coupling facility is on SIDE 0 of
a partitionable CPC.
- SIDE: 1 means that the coupling facility is on SIDE 1 of
a partitionable CPC.
- Blank means that the coupling facility is in a non-partitionable
CPC.
- cpcid
- Node Central Processor Complex (CPC) ID (See ndecpcid in IXLYNDE).
- reason
- reason is one of the following:
- REASON: CTNID MISMATCH - CF CTNID: cfstpid-cfetrid
- The CF request time ordering function is required for operations
to the CF; however, the CTNID that is defined for the CEC that is
running the CF does not match the CTNID that is defined for the CEC
that is running the z/OS system.
The cfstpid is the eight-byte STP portion of the
CTNID that has been defined for the CEC running the CF. The cfetrid is
the ETR Network ID of the ETR that is connected to the Coupling Facility.
Issue
D ETR to obtain CTN information for the CEC running the z/OS system.
In the message text:
System action
The system will discontinue using the coupling
facility if the timing characteristics are not corrected within 24
seconds.
Operator response
Notify the system programmer if the coupling
facility identified is critical for system operations.
System programmer response
Based on the reason described in the
message, determine the cause of the failure and correct it.
Source
Cross System Extended Services (XES)
Module
Routing code
Descriptor code