The storage administrator can redefine a tape library by specifying
a tape library that has a record in the TCDB, but no corresponding
library definition in this SCDS. The Tape Library Redefine panels
(Figure 1, Figure 2, Figure 3, and Figure 4) are displayed when the storage administrator
selects option 3, DEFINE, on the Tape Library Application Selection
panel, and there is already a tape library record for this library
name in the TCDB. The library is redefined since most of the information
describing the library already resides in the TCDB and does not have
to be re-entered.
When the redefine panel is first shown, message DGTLM020—ATTRIBUTES
PRIMED appears to emphasize that a redefine is taking place. When
END is pressed, a record is added to the new SCDS. The TCDB is updated
only if one of the relevant fields on a redefine panel is changed.
The changes are not effective until the updated SCDS is activated.
Figure 1. Tape Library Redefine Panel (Page 1 of 4) Panel Utilities Scroll Help
------------------------------------------------------------------------------
TAPE LIBRARY REDEFINE ATTRIBUTES PRIMED
Command ===>_
SCDS Name . :SCDS.TEMP2.PRIMARY
Library Name :LIB1
Library Type :AUTOMATED
Device Type :3495-L50
To Redefine Library, Specify:
Description ===> Automated tape library 0001C in
===> building 031
Library ID . . . . . . . . . . . 0001C (00001 to FFFFF)
Note: Library ID changes will be reflected in the TCDB without having the
configuration with the Library Name activated.
Console Name . . . . . . . . . . LIB1CON
Entry Default Data class . . . .
Entry Default Use Attribute . . P (P=PRIVATE or S=SCRATCH)
Eject Default . . . . . . . . . K (P=PURGE or K=KEEP)
Use ENTER to Perform Verification; Use DOWN Command to View Next Panel;
Use HELP Command for Help; Use END Command to Save and Exit; CANCEL to Exit.
Figure 2. Tape Library Redefine Panel (Page 2 of 4) Panel Utilities Scroll Help
------------------------------------------------------------------------------
TAPE LIBRARY REDEFINE ATTRIBUTES PRIMED
Command ===>_
SCDS Name . :SCDS.TEMP2.PRIMARY
Library Name :LIB1
Library Type :AUTOMATED
Device Type :3495-L50
Media Type: Scratch Threshold Scratch Number
Media1 . . . . . . . . . . . 100 (0 to 999999) 1250
Media2 . . . . . . . . . . . 150 (0 to 999999) 725
Media3 . . . . . . . . . . . 100 (0 to 999999) 1100
Media4 . . . . . . . . . . . 0 (0 to 999999) 0
Media5 . . . . . . . . . . . 0 (0 to 999999) 0
Media6 . . . . . . . . . . . 0 (0 to 999999) 0
Media7 . . . . . . . . . . . 0 (0 to 999999) 0
Media8 . . . . . . . . . . . 0 (0 to 999999) 0
Media9 . . . . . . . . . . . 0 (0 to 999999) 0
Media10 . . . . . . . . . . . 0 (0 to 999999) 0
Media11 . . . . . . . . . . . 0 (0 to 999999) 0
Media12 . . . . . . . . . . . 0 (0 to 999999) 0
Media13 . . . . . . . . . . . 0 (0 to 999999) 0
Use ENTER to Perform Verification; Use DOWN Command to View Next Panel;
Use HELP Command for Help; Use END Command to Save and Exit; CANCEL to Exit.
Figure 3. Tape Library Redefine Panel (Page 3 of 4) Panel Utilities Scroll Help
------------------------------------------------------------------------------
TAPE LIBRARY REDEFINE ATTRIBUTES PRIMED
Command ===>
SCDS Name . . . :SCDS.TEMP2.PRIMARY
Library Name . . :LIB1
Library Type . . :AUTOMATED * SYS GROUP= Sysplex minus systems in
Device Type . . :3495-L50 sysplex explicitly defined SCDS
Library ID . . . :0001C
Number of Slots :16260 Empty Slots . . :2050
Initial Online Status (Yes, No, or Blank):
*SYSPLX01 ===> *SYSPLX02 ===> *SYSPLX03 ===> *SYSPLX04 ===>
SYSSTM01 ===> YES SYSSTM04 ===> YES SYSSTM07 ===> SYSSTM10 ===>
SYSSTM02 ===> SYSSTM05 ===> SYSSTM08 ===> SYSSTM11 ===>
SYSSTM03 ===> SYSSTM06 ===> SYSSTM09 ===> SYSSTM12 ===>
WARNING:
When you connect a tape library to a system group rather than a system,
you lose the ability to vary that library online or offline to the
individual systems in the system group. It is strongly recommended that
the tape library be connected to individual systems only.
Use ENTER to Perform Verification; Use UP/DOWN Command to View Other Panels;
Use HELP Command for Help; Use END Command to Save and Exit; CANCEL to Exit.
Figure 4. Tape Library Redefine Panel (Page 4 of 4) Panel Utilities Scroll Help
------------------------------------------------------------------------------
TAPE LIBRARY REDEFINE ATTRIBUTES PRIMED
Command ===>
SCDS Name . . :SCDS.TEMP2.PRIMARY
Library Name :LIB1
Library Type :AUTOMATED * SYS GROUP = Sysplex minus systems in
Device Type . :3495-L50 sysplex explicitly defined in SCDS.
Library ID . :0001C
Number of Slots :16260 Empty Slots . :2050
Initial Online Status (Yes, No, or Blank):
SYSSTM13 ===> YES SYSSTM17 ===> YES SYSSTM21 ===> SYSSTM25 ===>
SYSSTM14 ===> SYSSTM18 ===> SYSSTM22 ===> SYSSTM26 ===>
SYSSTM15 ===> SYSSTM19 ===> SYSSTM23 ===> SYSSTM27 ===>
SYSSTM16 ===> SYSSTM20 ===> SYSSTM24 ===> SYSSTM28 ===>
WARNING:
When you connect a tape library to a system group rather than a system,
you lose the ability to vary that library online or offline to the
individual systems in the system group. It is strongly recommended that
the tape library be connected to individual systems only.
Use ENTER to Perform Verification; Use UP Command to View Previous Panel;
Use HELP Command for Help; Use END Command to Save and Exit; CANCEL to Exit.
The following fields are primed from the TCDB when the Tape Library
Redefine panels are displayed:
- DESCRIPTION
- LIBRARY ID
- CONSOLE NAME
- SCRATCH THRESHOLD
The following fields are maintained in the SCDS and not in the
TCDB. Since there is no SCDS definition to supply these values for
redefine, the redefine panel displays the following primed values: