A storage administrator can display the attributes of a tape library
dataserver by:
- Select option 2, DISPLAY,
on the Tape Library Application Selection
panel (Figure 3).
- Press
ENTER.
Figure 1 shows the
first of the two
TAPE LIBRARY DISPLAY panels that are displayed.
Figure 1. Tape Library Display Panel (Page 1 of 2) Panel Utilities Scroll Help
------------------------------------------------------------------------------
TAPE LIBRARY DISPLAY Page 1 of 2
Command ===>_
CDS Name . . . : SCDS.TEMP.PRIMARY
Library Name . :LIB1 Device Type . :3495-L50
Library Type . :AUTOMATED Library ID . . :0001C
Description . :Automated tape library 0001C in building 031
Console Name . . . . . . . :LIB1CON
Entry Default Data Class . :DCATLDS
Entry Default Use Attribute :PRIVATE
Eject Default . . . . . . . :KEEP
Media Type: Media1 Media2 Media3 Media4 Media5
Scratch Threshold: 100 150 100 0 0
Scratch Number: 1250 725 1100 0 0
Media Type: Media6 Media7 Media8 Media9 Media10
Scratch Threshold: 100 150 100 0 0
Scratch Number: 1250 725 1100 0 0
Media Type: Media11 Media12 Media13
Scratch Threshold: 50 100 500
Scratch Number: 250 150 1000
Use DOWN Command to View Next Panel;
Use HELP Command for Help; Use END Command to Exit.
The following fields are displayed:
- CDS NAME
- The name of the control data set to which this library
is associated.
- LIBRARY NAME
- The
name you specified in the library definition on the Tape Library
Management Application Selection panel.
- LIBRARY TYPE
- The type of library. Valid types are: AUTOMATED
and MANUAL.
- DEVICE TYPE
- The device
type associated with the library:
- dddd-mmm (for an automated tape library
including a virtual tape library), where dddd is the device type of the library, and mmm is the model. For a composite library that is part of a multi-cluster
grid, the distributed libraries should be displayed for the underlying
machine and model types. "GRID" might be displayed for the
composite library’s device type
- MANUAL (for a Manual Tape
Library)
- -------- the value is not available.
- ????????
the value cannot be displayed due to an error.
- LIBRARY ID
- Establishes the connection between
the software-assigned library
name and the tape drives that belong to the library. A valid value
is entered as five-hexadecimal digits. For an ATLDS, it is defined
at the library by the customer engineer and must also match what is
optionally specified in the HCD LIBRARY-ID parameter. This value is
returned by the control unit in response to a read device characteristics
command. For an MTL, it must match what was specified in the HCD LIBRARY-ID
parameter. Valid values are 00001 - FFFFF; a default value of 00000
is not allowed.
- DESCRIPTION
- This
is a 120-byte field that the installation uses to describe
the library. There are no restrictions on its content.
- CONSOLE NAME
- The name of the MVS console associated
with the tape library being
defined. The console name provides for precise routing of console
messages pertaining to a specific library. When the console name is
not specified, console name routing support is not provided. The console
name is passed to the installation exits for their use.
- ENTRY DEFAULT DATA CLASS
- Specifies the data class
to be used to determine the interchange
attributes for private volumes entered into the tape library. No other
attributes of the data class are used. You can use the cartridge entry
installation exit (CBRUXENT) to assign appropriate interchange values
that override the default data class specifications.
Note: The specified
data class name is not automatically assigned or used as the default
data class policy name for outboard policy management.
- ENTRY DEFAULT USE ATTRIBUTE
- The default
volume use attribute for the cartridges entered into
the library.
- PRIVATE
- These
tape cartridges can be used to satisfy specific volume requests.
- SCRATCH
- These tape cartridges can be
used to satisfy nonspecific volume
requests.
- EJECT DEFAULT
- The default action for the TCDB volume record when a tape cartridge
is ejected from the library being defined.
- PURGE
- The volume record is deleted from the TCDB.
- KEEP
- The volume record is kept in the
TCDB.
Note: No matter which disposition is specified,
the
volume record in the ATLDS library manager inventory is deleted upon
cartridge ejection.
- MEDIA TYPE
- The following are recognized media types:
- MEDIA1
- IBM Cartridge System Tape
- MEDIA2
- IBM Enhanced Capacity Cartridge System
Tape
- MEDIA3
- IBM High Performance
Cartridge Tape
- MEDIA4
- IBM Extended
High Performance Cartridge Tape
- MEDIA5
- IBM Enterprise Tape Cartridge
- MEDIA6
- IBM Enterprise WORM Tape Cartridge
- MEDIA7
- IBM Enterprise Economy Tape Cartridge
- MEDIA8
- IBM Enterprise Economy WORM Tape Cartridge
- MEDIA9
- IBM Enterprise Extended Tape
Cartridge.
- MEDIA10
- IBM Enterprise
Extended WORM Tape Cartridge.
- MEDIA11
- IBM Enterprise Advanced Tape Cartridge.
- MEDIA12
- IBM Enterprise Advanced WORM Tape Cartridge.
- MEDIA13
- IBM Enterprise Advanced Economy
Tape Cartridge.
- SCRATCH
THRESHOLD
- The minimum acceptable number of scratch volumes
for each media
type in the library.
- SCRATCH NUMBER
- The number of tape cartridges available to satisfy nonspecific
volume requests.
Figure 2 shows the second part of the
Tape Library Display panel.
Figure 2. Tape Library
Display Panel (Page 2 of 2) Panel Utilities Scroll Help
------------------------------------------------------------------------------
TAPE LIBRARY DISPLAY Page 2 of 2
Command ===>
CDS Name . . . :SCDS.TEMP.PRIMARY
Library Name . :LIB1
Library Type . :AUTOMATED
Device Type . :3495-L50
Library ID . . :0001C
Number of Slots . :16260
Empty Slots . . . :2050
Initial Online Status :
*SYSPLX01: *SYSPLX02: *SYSPLX03: *SYSPLX04:
SYSSTM01:YES SYSSTM08: SYSSTM15: SYSSTM22:
SYSSTM02: SYSSTM09: SYSSTM16: SYSSTM23:
SYSSTM03: SYSSTM10: SYSSTM17: SYSSTM24:
SYSSTM04:YES SYSSTM11: SYSSTM18: SYSSTM25:
SYSSTM05: SYSSTM12: SYSSTM19: SYSSTM26:
SYSSTM06: SYSSTM13: SYSSTM20: SYSSTM27:
SYSSTM07: SYSSTM14: SYSSTM21: SYSSTM28:
Use UP Command to View Previous Panel;
Use HELP Command for Help; Use END Command to Exit.
The following fields are displayed:
- NUMBER OF SLOTS
- The number of tape cartridge slots within the tape library. This
number is always zero for an MTL.
- EMPTY
SLOTS
- The number of tape cartridge slots that are empty and
available
within the tape library. This number is always zero for an MTL.
- INITIAL ONLINE STATUS
- The status of
whether this tape library should be:
- Online
(YES)
- Offline (NO)
- Not connected (blank)
to each system or system group in the SMS complex when the SCDS
is activated. As the online/offline status is changed with the SMS
VARY, LIBRARY command, the current status is maintained in the ACDS
but not in the base SCDS. Thus, the status values in the base SCDS
may not be current. The system and system group names shown are
the actual names taken from the base configuration record of the CDS.
The number of system and system group names shown can vary between
one and thirty-two. The display shows the difference between system
names and system group names by preceding each system group name by
an asterisk.