CU table

Table 1. CU Table
Field Name	Format	Description
Table Name	Text	CU
ID	Hex	<IODF Key> The ID of the IODF object.
Container	Text	Applicable only for new control units that are not already in the PC configuration. Specifies the exact placement of the "new" control unit within a physical controller. A container object is either a controller label (for single segment controllers such as 3174), or a controller label/segment name, for controllers which have two segments. If not specified, HCM will place the device using the normal heuristics employed during the IODF load/resync process (this placement is based primarily on serial number). For example, 3174 #5, 3990 #12/SC0. Internal switch control units (those which are logically connected to port FE), and control units of type CTC or CFS, receive special treatment as follows: Import ignores this field and the objects are placed automatically. For CTC and CFS control units, export leaves this field blank since there is no meaningful container object for these control units. Ignored for control units which are already in the PC configuration file (they have already been placed).
Serial number	Text EO	The serial number of the IODF object. Note: HCM uses the serial number of the container controller to update the IODF with control unit serial numbers.
Description	Text	<Updates the IODF> The description of the IODF object.
Type	Text EO	Value taken from the IODF object.
SSID	Text	The subsystem ID of the control unit.