A fix is available
APAR status
Closed as new function.
Error description
Compatibility Toleration Coexistence with HJS77A0 z/OS JES3 V2R2 The projected closing code for this APAR is UR1 for releases HJS7780 and HJS7790. KEYWORD: ZOS0202C/K ZOS0203C/K ZOS0204C/K
Local fix
Problem summary
**************************************************************** * USERS AFFECTED: All users of HJS7780 and HJS7790 who plan * * to run JES3 release HJS77A0 in the same * * JESplex. * **************************************************************** * PROBLEM DESCRIPTION: Toleration APAR for z/OS JES3 V2R2. * **************************************************************** * RECOMMENDATION: * **************************************************************** In a JES3 JESplex, JES3 release HJS77A0 can co-exist with releases HJS7780 and HJS7790. Support of new function in JES3 release HJS77A0 requires toleration updates to pre-HJS77A0 JES3 releases.
Problem conclusion
KEYWORDS: ZOS0203C/K
Temporary fix
*** * TEMPORARY FIX MAY BE OBTAINED FROM DLL OR INFO/ACCESS **** ******************* OA43563 DECK AVAILABLE ********************
Comments
Installation On (All processors) Order (Any) Activation Order (Any) Type/JES3 restart (Hot,Local,C/I FSS) Type/IPL (None) CLPA (Yes) (See Apar II07968 for definitions) JES3 initialization modules are updated so that JES3 utilizes the copy of IEFNB903 available in LPA rather than using ALOAD of the IEFNB903 copy in LINKLIB. Starting in z/OS V2R2, JES3 will support the PROCLIB parameter of the JCLLIB JCL statement. To fully support the PROCLIB parameter, jobs using the PROCLIB parameter which have gone through input service on a V2R2 global must be scheduled for C/I by a V2R2 global. JES3 modules for V1R13 and V2R1 are updated such that jobs which have been through input service on a V2R2 global which use the PROCLIB parameter, will be held from further processing until the V2R2 global is again available. To support new functions, starting in z/OS V2R2 JES3 creates an extension of the Job Control Table (JCT) maintained for each job. Like the JCT, the JCT Extension (JCTX) is stored on spool. JES3 modules are updated to recognize and maintain the JCTX for jobs created by a JES3 global running V2R2. Starting with z/OS V2R2, JES3 adds support for a number of new parameters in the JES3 initialization statements. JES3 initialization modules are updated to recognize and save the parameter values of the keywords users may have added to the initialization statements for use with V2R2. Starting with z/OS V2R2, JES3 adds support which required extending the fixed area of the Locate Response (IATYLRS) control block. JES3 modules are updated for V1R13 and V2R1 to recognize and handle an LRS control block sent from a JES3 global running V2R2. z/OS V2R2 will be designed to support a number of enhancements for system symbols. JES3 passes system symbol tables between systems for processing of jobs using symbols. JES3 modules are updated to recognize and maintain the system symbol tables received from a JES3 global running V2R2. Starting with z/OS V2R2, JES3 adds support for the SYMBOLS= parameter of the DD JCL statement. The SYMBOLS= parameter was first supported by C/I with z/OS V2R1. JES3 modules are updated for V2R1 to support SYMBOLS=JCLONLY and SYMBOLS=EXECSYS for JES3 CIFSS running on z/OS V2R1. z/OS JES3 Messages (SA22-7552-xx) z/OS JES3 Messages (SA32-1007-xx) Chapter 6. Initialization Messages Add messages IAT3211, IAT3277 and IAT3278. IAT3211 Explanation >>- TOTAL_ _JETPOOL_ _SIZE REDUCED FROM nnn TO mmm-->< |_OSTPOOL_| |_DOTPOOL_| |_SEEPOOL_| This message indicates that the total size of the pool was rounded down to the nearest multiple of 16. nnn - The number of cells in thousands, specified in the JETPOOL|OSTPOOL|DOTPOOL|SEEPOOL keyword of the OPTIONS statement. mmm - The value calculated as a 16 multiple of the computed secondary extend size in thousands. System action JES3 processing continues. This is an informational message. Operator response Inform the systems programmer. System programmer response Adjust the total number in the displayed keyword in the initialization stream. Module Containing Detecting Issuing IATINIC IATINIC IATINIC Routing Code: 2,10 Descriptor Code: 1,7 IAT3277 Explanation WARNING: KEYWORD OUTDISP IGNORED WHEN HOLD=3540 IS SPECIFIED A SYSOUT statement in the initialization stream was found which specifies both HOLD=3540 and the the OUTDISP keyword for a SYSOUT class. System action JES3 initialization continues. OUTDISP keyword is ignored. Operator response Notify the system programmer. System programmer response Correct the SYSOUT statement in the initialization stream which specifies both HOLD=3540 and the OUTDISP keyword for a SYSOUT class. Module Containing Detecting Issuing IATINSC IATINSC IATINSC Routing Code: Note 19 Descriptor Code: -- IAT3278 Explanation WARNING: PARAMETER TSO FOR KEYWORD HOLD IGNORED WHEN OUTDISP IS SPECIFIED A SYSOUT statement in the initialization stream was found which specifies both the TSO parameter for the HOLD keyword and the OUTDISP keyword for a SYSOUT class. System action JES3 initialization continues. The TSO parameter for the HOLD keyword is ignored. Operator response Notify the system programmer. System programmer response Correct the SYSOUT statement in the initialization stream which specifies both the TSO parameter for the HOLD keyword and the OUTDISP keyword for a SYSOUT class. Module Containing Detecting Issuing IATINSC IATINSC IATINSC Routing Code: Note 19 Descriptor Code: -- Chapter 12. General Routines Messages IAT6395 Insert the following reason to the list that explains the content and meaning of the waittext in the message: | WAITING FOR A GLOBAL AT THE PROPER LEVEL | The job is requesting an unsupported function | on the current level of the global. The job | will wait until a global at a level that | supports the function is started. The | unsupported functions include: | - The JCLLIB statement's PROCLIB keyword | on pre-V2R2 globals. IAT6396 Insert the following reason to the list that explains the content and meaning of the waittext in the message: | WAITING FOR A GLOBAL AT THE PROPER LEVEL | The job is requesting an unsupported function | on the current level of the global. The job | will wait until a global at a level that | supports the function is started. The | unsupported functions include: | - The JCLLIB statement's PROCLIB keyword | on pre-V2R2 globals. Chapter 22. Utilities Messages IAT7762 Insert the following wait reason to the list that explains the contents of JQEQFLGS: | - A GLOBAL AT THE PROPER LEVEL | The job is requesting an unsupported function | on the current level of the global. The job | will wait until a global at a level that | supports the function is started. The | unsupported functions include: | - The JCLLIB statement's PROCLIB keyword | on pre-V2R2 globals. Chapter 24. Inquiry Messages IAT8679 Insert the following reason into the list that explains the contents of reasontext: | A GLOBAL AT THE PROPER LEVEL | The job is requesting an unsupported function | on the current level of the global. The job | will wait until a global at a level that | supports the function is started. The | unsupported functions include: | - The JCLLIB statement's PROCLIB keyword | on pre-V2R2 globals. ================================================================ z/OS JES3 Initialization and Tuning Reference SA22-7550-xx z/OS JES3 Initialization and Tuning Reference SA32-1005-xx The following keywords may be specified on the OPTIONS statement: >--+------------------------------------------+-------------> '-,DOTPOOL=--(--+---------+--+--------+--)-' '-primary-' '-,total-' >--+------------------------------------------+-------------> '-,JETPOOL=--(--+---------+--+--------+--)-' '-primary-' '-,total-' >--+------------------------------------------+-------------> '-,OSTPOOL=--(--+---------+--+--------+--)-' '-primary-' '-,total-' >--+------------------------------------------+-------------> '-,SEEPOOL=--(--+---------+--+--------+--)-' '-primary-' '-,total-' The following keyword may be specified on the SYSOUT class statement: >--+-----------------------------------------------+--------> '-,OUTDISP=--+--+-HOLD--+--------------------+--' ' +-KEEP--+ ' ' +-LEAVE-+ ' ' +-PURGE-+ ' ' '-WRITE-' ' ' ' '--(--+-------+--+--------+--)--' +-HOLD--+ +-,HOLD--+ +-KEEP--+ +-,KEEP--+ +-LEAVE-+ +-,LEAVE-+ +-PURGE-+ +-,PURGE-+ '-WRITE-' '-,WRITE-' Those keywords are provided for compatibility with release z/OS V2R2. See the JES3 INITIALIZATION AND TUNING REFERENCE for z/OS V2R2 for their explanation. ×**** PE15/10/20 FIX IN ERROR. SEE APAR OA49170 FOR DESCRIPTION ×**** PE16/05/31 FIX IN ERROR. SEE APAR OA50428 FOR DESCRIPTION
APAR Information
APAR number
OA43563
Reported component name
JES3
Reported component ID
5752SC1BA
Reported release
780
Status
CLOSED UR1
PE
NoPE
HIPER
NoHIPER
Special Attention
YesSpecatt / New Function / Xsystem
Submitted date
2013-10-07
Closed date
2015-04-01
Last modified date
2019-04-01
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UA76771 UA76772
Modules/Macros
IATABEFC IATABEJQ IATABN9 IATCNIN IATDJIN IATDJOT IATDMDM IATFCSN IATFPGD IATGRJS IATGRJX IATGRMN IATGRWJ IATIICC IATIICS IATIICX IATIIDR IATIIFC IATIIOR IATIIP0 IATIIP0X IATINIC IATINJB IATINJQ IATINJR IATINM3 IATINSC IATIPJDS IATIPJQE IATIPJQX IATIPJVW IATIPTVT IATISDV IATJVDR IATJVLG IATMFDT IATMSDR IATMSR1 IATMSR2 IATSIAD IATSIVI IATUTDS IATYAWR IATYEQU IATYGLOB IATYIDD IATYJCT IATYJDA IATYJDS IATYJDSO IATYJQE IATYJQX IATYJSS IATYJVW IATYLRS IATYSCT IATYTVT
| SA227552XX | SA321007XX | SA227550XX | SA321005XX |
Fix information
Fixed component name
JES3
Fixed component ID
5752SC1BA
Applicable component levels
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG19M","label":"APARs - z\/OS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"780","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":null,"label":null},"Product":{"code":"SG19O","label":"APARs - MVS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"780","Edition":"","Line of Business":{"code":"","label":""}}]
Document Information
Modified date:
01 April 2019