| APAR Number | PUT | Abstract |
| PJ25743 | 14 | Issuing successive ZMEAS functional messages to start, terminate or reset Data Collection may cause a CTL-001 to occur. |
| PJ26102 | 13 | This APAR creates a new user macro to define user created CINFC labels. |
| PJ26334 | 14 | This APAR creates a new SNAKEY parameter (RECOP) that will allow users to specify a timeout value for 3270 printers. |
| PJ26518 | 13 | A CTL-C121 or CTL-C may occur when writing over a posix file or greatly reducing the size of a TPFCS (provided with APAR PJ25098) BLOB using TO2_setSize. |
| PJ26527 | 14 | When using a 3494 tape library, the category of the volume will change when the drive is unloaded, but the operator is not notified. |
| PJ26712 | 14 | With APARs PJ21791 and PJ26683 applied, writev() issues multiple calls to write() when passed multiple buffers, as opposed to one call for all of the buffers. |
| PJ26739 | 13 | COT7 error messages are issued with an incorrect severity indicator. In addition, some tape messages are missing or incorrect in TPF Messages. |
| PJ26767 | 13 | Compiling a module that has the levtest() macro with a nonvariable argument will result in the informational message THE CONDITION IS ALWAYS TRUE or the informational message THE CONDITION IS ALWAYS FALSE. |
| PJ26794 | 13 | A CTL-052 system error may occur if a TASNC macro is issued while a tape switch is in progress on another I-stream. |
| PJ26813 | 13 | TO2_last() fails on an empty BLOB. |
| PJ26826 | 14 | Fix problems detected after closure the Multi-mod SPE, PJ26686. |
| PJ26851 | 13 | After applying PJ14605, attempts to mount an output tape on a 3494 tape library fail with an error indicating that the cartridge is write protected if the library manager is offline. |
| PJ26858 | 13 | With APAR PJ26161 applied, inbound and outbound messages associated with Type-A conversational sessions are incorrectly processed by MATIP. |
| PJ26891 | 13 | With APAR PJ20156 applied, a CTL-35, CTL-10, CTL-3, or CTL-4 may occur when a loadset containing a TPFDF fast-link program or a TPFDF fast-link table build program cannot be activated successfully. |
| PJ26897 | 13 | With APAR PJ25671 applied, a CTL-4 dump out of CMTJ may occur when running in block check mode. |
| PJ26899 | 14 | The TO2_addAllFrom() function, provided with APAR PJ25098, may fail with a CTL-3 system error under certain circumstances. |
| PJ26906 | 14 | As a result of PJ26143, TO2_cursorPlus incorrectly returns success on an attempt to position the cursor beyond the last element of an extended keyed collection. |
| PJ26932 | 13 | A CTL-C6204A dump can occur immediately after a CTL-3 or CTL-4. |
| PJ26935 | 13 | The TO2_replaceBLOB() function, provided with APAR PJ25332, may not work when the BLOB being replaced is less than 8K in size. |
| PJ26951 | 13 | Assembler debugger is not adding nonBSS subsystem programs to the program exclusion table. This problem was injected by PJ26864. Also CUDXDB needs to code the IDLOC parameter on the PROGC macro. |
| PJ26955 | 13 | There is a need for switching an ECB from one i-stream to another i-stream without creating a new ECB. |
| PJ26958 | 13 | If scanf is invoked below 1052 state, a ctl F9 is generated. |
| PJ26995 | 13 | Upon activation of the Internet daemon, the IUCV trace records every SELECT() call which causes the tape to fill with useless data. |
| PJ26996 | 13 | ZFINT ON in 1052 inadvertently marks file system as inoperative. |
| PJ27000 | 14 | Updates are needed to reserve record ID's '00FF and '00E0' for IBM ONLY use. |
| PJ27004 | 14 | A CTL-4E1 dump (attempt to SOUTC PIU with pacing window exhausted) can occur when output message transmission (OMT) segment CMTB attempts to SOUTC a PIU without locking the LU RVT. |
| PJ27011 | 14 | The Internet Daemon does not correctly handle sockets following an online load resulting in OPR-I007704 from CLTX. |
| PJ27013 | 13 | Prevent file system read from reading past the end of file. |
| PJ27017 | 13 | APAR PJ25094 overwrites the RITSYN and RITRUSR fields in DRD5 |
| PJ27019 | 13 | Addition of two new user exits and support to allow easier addition of user exits in the future. |
| PJ27025 | 13 | Log processor may be skipped for pseudo SNA/SDLC terminals, after APAR PJ24309 is applied. |
| PJ27026 | 13 | A CTL-4 system error may occur during unsolicited message processing. |
| PJ27027 | 13 | Provide support for default MQMD persistence value (PERSISTENCE_AS_Q_DEF). |
| PJ27029 | 13 | Contention winner/loser processing is not correct for LU 6.2 SLU thread sessions across PU5 networks, which results in all threads being contention winner or all threads being contention loser. |
| PJ27031 | 13 | With APAR PJ25375 applied, an incorrect client count may be displayed with the ZDTCP NETSTAT functional message. |
| PJ27035 | 13 | ZECBL may not work properly when tightly coupled. |
| PJ27038 | 13 | TPF VSAM support is not compatible with DFSMS 1.5. |
| PJ27039 | 13 | With PJ26150 applied an UNFRC for a zero file address may cause a CTL-1 dump. |
| PJ27045 | 13 | Assembling segment CLEMIC with HLASM Release 3 results in a return code of 4. |
| PJ27052 | 13 | While debugging a C or C++ program in the TPF C Debugger for VisualAge Client, a CTL-4 will result if you try to dereference a pointer contained within an array of pointers. |
| PJ27071 | 13 | CTL-4 out of CLXASNDI send intercept routine in CLXA when called from routine CXMCOTP in CLXA. |
| PJ27073 | 13 | Update IBMPAL for future TPFDF enhancements. |
| PJ27074 | 13 | In the POSTC macro, if R14 is specified in the ERCODE parameter, incorrect code is generated. |
| PJ27075 | 13 | As a result of PJ26578, setting OPT(1) for MASM compile jobs does not work, and MASM still supports compilers that are no longer usable with current levels of TPF. |
| PJ27076 | 13 | When using TPFCS, which was provided by APAR PJ25098, file system functions such as scanf or any other TPF function such as MQSeries that requires TPFCS may cause database corruption. |
| PJ27078 | 13 | Allow recursive removal of directories from a relative pathname |
| PJ27082 | 13 | Due to APAR PJ21313, SIOSC events are formatted incorrectly in a system error dump. |
| PJ27083 | 13 | Provide TPF logical record cache use of coupling facility cache structures. |
| PJ27084 | 13 | CONKC being issued against the wrong MDBF subsystem can cause a Set Path Group ID to go to the wrong device. |
| PJ27086 | 13 | C header for RVT does not include all tags. |
| PJ27087 | 13 | The threshold value for CORE0217W DEVICE cuu nnnnnn VOLUMES LEFT FOR FILL CAT-cccc, needs to accept values larger than 255. |
| PJ27088 | 13 | IBM prefix of I not appearing for system error messages. |
| PJ27089 | 13 | Trace files do not get created by the TPF Performance Analyzer when users enter certain trace file names in the VisualAge debug registration window. |
| PJ27090 | 13 | The child ECB will always be traced by the C debugger on a tpf_fork function call , even if it was only requested to trace the parent ECB. This problem was injected by PJ25589. |
| PJ27091 | 13 | Some ZFILE commands using tail can cause a ctl 4 because variables are not initialized correctly. |
| PJ27092 | 14 | Errors during restart when MQ DLL is loaded via OLDR |
| PJ27094 | 14 | The zfile ls output is always formatted for the screen and includes embedded blanks. |
| PJ27096 | 13 | When using scrolling package, extra blank lines are displayed by ZDMAP message. |
| PJ27097 | 13 | ZMCPY may hang on system when copy is from/to the system prime module. |
| PJ27099 | 13 | If a parent ECB creates more than 36 child ECBs, the first 4 bytes of the return code field of the 37th child is missing and the following area is shifted by 4 bytes. |
| PJ27100 | 13 | The table of extents in CTSD will only handle extents whose size is less than 64K tracks. If more than 64K tracks exist in an extent, copy will not copy many of the tracks in that extent. |
| PJ27102 | 13 | This APAR improves the performance of the String Find function of the TPF Assembler Debugger for VisualAge Client. This problem was introduced in APAR PJ25981. |
| PJ27104 | 13 | When using the C debugger on an application that changes the key to 0, a "step into" at any time after will change the protect key in the Program Status Word(PSW) back to 1. |
| PJ27105 | 13 | APAR PJ25449 causes streaming IPLB0072W messages for a L/C system when LKFAC support is not being used under VM. |
| PJ27107 | 13 | TPFAR may cause an OPR-7A5 dump when attempting an SQL connect with an invalid RDB name using TCP/IP (added by PJ27079). |
| PJ27108 | 13 | PJ26666 just UPDATES C$IDSICD BUT NOT IDSICD. |
| PJ27110 | 13 | PJ26146 missed two hardcoded references to the number of I-streams in C$MS0UT resulting in length calculation errors. |
| PJ27115 | 13 | POSTC ERRCODE parameter coded incorrectly. |
| PJ27154 | 13 | After applying PJ24563, end of data errors are reported when trying to read header labels on tapes that were mounted as ALT tapes. |
| PJ27155 | 13 | The C debugger option to trace created entries does not extend to those created by the swisc_create() function. |
| PJ27160 | 13 | The VisualAge TPF debug server does not restart when a loadset is activated or deactivated. |
| PJ27161 | 13 | An exiting child process wakes a blocked parent process. |
| PJ27177 | 13 | With PJ25780, a TPF system IPL'd without an initialized TPFCS results in unexpected error messages from TPF MQSeries local queue manager support. |
| PJ27178 | 13 | A program check may occur following a dump tape switch for a dump tape, causing the remainder of the dump to be aborted. |
| PJ27180 | 13 | SIP does not accommodate circular references at DLL link time. |
| PJ27182 | 13 | With Turbo MQ support(PJ27023), at the start of the queue manager, CMQS may take a CTL-10 if the sender channel has a very large outstanding batch. |
| PJ27183 | 13 | ZTGRP DISPLAY DEVICES does not display assignments made with the SSU ALL option. |
| PJ27186 | 13 | This enhancement allows the use of Diag X'44' to give up control when the non main I-streams are waiting for the dump to complete. This allows other LPARS to gain CPU cycles. |
| PJ27187 | 13 | With TCP/IP native stack support applied, the connect() API fails to timeout. |
| PJ27189 | 13 | An immediate CC3 encountered by IPLB due to path failure results in taking the device off-line. |
| PJ27190 | 13 | Issuing migrate commit in a loosely coupled environment does not notify other processors to update their memory copy of the QMGR profile. |
| PJ27191 | 15 | TO2_locate on an empty keyed collection should return TO2_ERROR_LOCATOR_NOT_FOUND instead of TO2_ERROR_EMPTY. |
| PJ27192 | 13 | As a result of PJ26707, a failure during locking restart no longer forces a system reipl. |
| PJ27194 | 13 | Running recoup may result in multiple CTL-420 system errors as a result of the addition of the TPF collection support (TPFCS) pool reuse table, made available with APAR PJ26143. |
| PJ27196 | 14 | Infinite retry of a tape operation may result in a hung tape queue and a possible system outage. |
| PJ27197 | 13 | Capture does not have a ZFCAP STATUS MODULE functional message. |
| PJ27198 | 14 | Multiple ALS/NCP/CTC links may be assigned the same CW0CC area index during SNA Restart processing. This can lead to CTL-4DB dumps from SOUTC processing. |
| PJ27199 | 13 | CTL-571 may occur after applying PJ25496. |
| PJ27200 | 13 | The cached unlock policer causes excessive software locking on the Module File Status Table (MFST). This can degrade system performance. |
| PJ27201 | 13 | When processing ACTCDRM, or DACTCDRM request/response, R1 gets corrupted and we lose addressability to the PIU block which prevents TPF from sending out responses. |
| PJ27202 | 13 | CMUB40 and CMUC40 need to be changed to use a symbolic length of DCTMDR because of APAR PJ26362. |
| PJ27203 | 14 | Erroneous statistical display and acceptance of an incorrect network mask value, when displaying IP routing table entries (PJ26890). |
| PJ27204 | 13 | With TCP/IP native stack support (APAR PJ26683), an IP CDLC link can hang due to TPF issuing an initial pre-negotiation write XID with a CV22 (XID Error CV). |
| PJ27208 | 13 | DCRS does not process lower case Assembler correctly. |
| PJ27213 | 13 | With PJ27023, in a TPF BASE only system, entering ZMQSC DEF MQP will cause a SNAPC-F8 dump because CMQS issues a SIPCC function call. |
| PJ27214 | 13 | This apar adds support in several different areas: Named Pipes are now available, Select API can now operate with Named Pipes, a Syslog Daemon is now available, and Bind Support (resolver only) is available. |
| PJ27219 | 13 | Invalid ZTVAR format may cause CTL-3. |
| PJ27220 | 13 | Responses to subsystem specific operator input messages appear to be lost when the subsystem is in 1052 state. |
| PJ27221 | 13 | With PJ27023 applied, applications issuing MQGET or MQPUT func tion calls will result in a SNAP-EB dump because CGSWBC and CRSWBC are restricted macros. |
| PJ27222 | 13 | CTL-3 in segment CSS2 due to a protection exception. |
| PJ27223 | 13 | Corrupted auto blocks lead to dumps taking a long time. |
| PJ27224 | 13 | CDBS0005E message received after issuing ZDBUG STOP. |
| PJ27227 | 13 | With APAR PJ25375 applied, the ZDTCP TRACERTE functional message may attempt to display unprintable characters on the console. |
| PJ27230 | 13 | Provide TCP/IP TPF MQSeries client support. |
| PJ27231 | 13 | Repackage TPF MQ Series user exits into a separate DLL and create a new start queue manager user exit. |
| PJ27234 | 13 | EBW000 is corrupted during tx_commit processing. |
| PJ27235 | 13 | Due to PJ25981, issuing a ZDPAT on an unallocated program causes a CTL-463 when using a 3270 RO console. |
| PJ27236 | 13 | A potential base register problem exists in the WRTDMPEXIT1 routine in CPSL. This problem was caused by APAR PJ26188. |
| PJ27237 | 13 | A CTL-3 occurs when selecting menu item, View->Change text file... in the C debugger and entering a file name that does not exist. |
| PJ27242 | 13 | A TO2_atCursorPut() function may result in an internal TO2_ERROR_METHOD error after applying APAR PJ26518 because required changes to copy member cj521 were not packaged with the APAR. |
| PJ27246 | 13 | Provide space in segment CVAH for users to apply their own modifications. |
| PJ27247 | 14 | Using VA debugger, a ctl-3 out of CUDL occurs when tracing a program in 1052 state or with CLAW devices inactive. |
| PJ27250 | 13 | Incorporate the TPFDF macros STDHD, UI0OM, and UI2PF into TPF. |
| PJ27252 | 13 | GETPC on CDBG should only be done when program entering matches. Original APAR: PJ25632 |
| PJ27254 | 13 | Using the C debugger to step into a DLL function causes the assembler debugger to get activated. |
| PJ27255 | 13 | Modify ZINET DISPLAY S-* and ZINET DISPLAY S-Server to display the socket number in hexadecimal in addition to decimal. |
| PJ27256 | 13 | ZTPLF FILL and ZTPLF UNLOAD do not always properly load and unload tapes from tape drives that are attached to a 3494 tape library. |
| PJ27261 | 13 | The number of frames used by the C debugger is greatly increased from PUT10 to PUT12. |
| PJ27262 | 13 | A CTL-4 system error can occur in PTV restart, segment PTVB. |
| PJ27263 | 13 | Increase the size of the SVC and Fast Link macro stacks. |
| PJ27266 | 13 | Message numbers 2387 and 2392 are missing from LE message module CEEMMGET which causes SUI to issue error messages. |
| PJ27267 | 13 | The scanf() function family produces incorrect results with packed decimal data. |
| PJ27268 | 13 | Add DNS server support for load balancing and provide cache support for the DNS client code. |
| PJ27269 | 13 | After installing PJ25094, record ID 0 reads are no longer being reported by Data Reduction in the VFA Summary Access Counts. |
| PJ27270 | 13 | CTL-003 in CDBG when using the C debugger to monitor storage ending in 1F1 through 1FF. |
| PJ27271 | 13 | With APAR PJ26683 applied, DTCP0040I message is displayed after ZPAGE times out on a ZDTCP NETSTAT functional message with offload suport defined. |
| PJ27272 | 13 | Adding new parameters for ZTPLF Release/Reserve. |
| PJ27273 | 13 | MPIF may cause an IPL dump in an L/C complex complex following Turbo MQ APAR PJ27023. |
| PJ27274 | 14 | Recoup descriptors for MQSeries trace records pointed to by the TPFCS DS User Dictionary are not defined causing recoup errors to occur. |
| PJ27275 | 13 | Due to APAR PJ21337, there is a need to add and update dump labels for the ISO-C Control Structures. |
| PJ27277 | 13 | This APAR makes it easier to port or create new applications & scripting languages on TPF by expanding Internet server & File System support. Various enhancements were also made to existing ZFILE functional messages.f |
| PJ27278 | 13 | With PJ25780, the ZMQSC DISP QL functional message may have an incorrect value for "Num of MQCLOSE". |
| PJ27279 | 14 | SRT slots may not be returned properly to the TPF system causing unpredictable results. |
| PJ27283 | 14 | With PJ14605 applied, unpredictable results occur following a ZTVAR DELETE request on a device with outstanding I/O. |
| PJ27285 | 13 | Restoring of logging records may end prematurely if non-logging records were written to tape. Also, restoring of keypoint records can get into a loop of sending FRST87W message when WAITC post a permanent tape error. |
| PJ27286 | 13 | Using the C debugger to display strings near a 4K boundary may result in format of value failed. |
| PJ27287 | 13 | In DRD6, provided with APAR PJ25094, missing parenthesis on two NI instructions may cause problems |
| PJ27288 | 13 | With APAR PJ21791 applied, a CTL-00C system error occurs when CLAW trace is running. |
| PJ27289 | 13 | With PJ26686 applied, if a disk error is processed by multi-mod copy segment CYPF a CTL-4 dump will occur. |
| PJ27291 | 13 | SIP Stage II job SIPI2E, which linkedits the CP, should specify exactly where the encrytion modules are to be loaded from if the user specifies that they want encryption on the CONFIG macro. |
| PJ27294 | 13 | PU 2.1 LU 6.2 sessions can be rejected by the TPF system with sense code X'0805' if initiated from a remote PU 5 node. |
| PJ27295 | 13 | With APAR PJ27191 applied, the subsystem active and suspended ECB count fields are incorrectly changed when MDBF support has not been generated. |
| PJ27296 | 13 | On a fully duplicated system, ZMCPY UP fails to copy most of the module if records are defined as non-duplicated. |
| PJ27298 | 13 | SENDC TYPE-T needs to resize messages from 1055-byte blocks into 381-byte blocks. |
| PJ27299 | 13 | Provide the ability to remove a processor's inactive connections to a coupling facility structure (ZMCFT REMOVE). |
| PJ27302 | 13 | Provide a functional message to manually delete TPF locks that reside on the Coupling Facility. |
| PJ27303 | 13 | A CTL-4 can occur when TPF receives PU2.1 LU6.2 bind request with a Mode Name Structured Data Subfield without a modename specified in the subfield. |
| PJ27304 | 13 | Step over DETAC macro acts like a run from within the assembler debugger. |
| PJ27305 | 13 | TPF changes are required to support TPFDF APAR PQ36341. |
| PJ27306 | 13 | Ctl 3 when application is running in key 0. Prior apar PJ26958 added a cinfc_read which changes the protect key |
| PJ27309 | 14 | A SNAP-1F019 error may occur when issuing a ZTGRP DISPLAY request on a non-BSS subsystem. |
| PJ27311 | 14 | VM DASD devices enabled for LKFACR option may not be allowed on-line by TPF DASD mount process. |
| PJ27312 | 13 | After installing TPF support for VSAM data sets, PJ26150, multiple volume VSAM datasets are not successfully mounted. |
| PJ27313 | 13 | FDCTC error on ESS/SHARK GDS. |
| PJ27315 | 13 | With APAR PJ25094 applied, changes for PJ26006 were overwritten. This APAR fixes PJ25094 to include PJ26006. |
| PJ27316 | 14 | CTL-E2 dump can occur in COBD when issuing a ROUTC for a chained output message from a subsystem that is cycling down to 1052 state. |
| PJ27317 | 13 | Provide support for the fnmatch() function on TPF. |
| PJ27319 | 14 | ZFCAP STATUS command will display information for processors which are inactive. |
| PJ27324 | 13 | This apar will correct the handling of pending signals. When a signal handler is invoked through tpf_process_signals, the current signal being processed will be marked as handled. This apar also corrects the initialization of the event block created by the waitpid API. |
| PJ27326 | 13 | PJ26687 did not reset the subsystem name in the commit rollback control table to BSS in a MDBF system if the recovery log resides in the BSS subsystem. This causes CL210001E message and incorrect SSN in the ZCORO response message. |
| PJ27328 | 13 | TPF SIP enhancement to include the TPFDF product. |
| PJ27329 | 14 | With APAR PJ25589 applied, CVAA may take a CTL-4 dump when processing an input message which contains a prefix only and no message text |
| PJ27330 | 13 | Correct format of error message which CIJO sends to XSC1. |
| PJ27332 | 13 | Use of CE1CPD field may not provide the correct CPU ID on which the ECB is running. |
| PJ27333 | 13 | OSA-Express support. |
| PJ27334 | 13 | Non-catastrophic OPR-6C2 may occur when deleting locks for a module going offline in an MDBF system. |
| PJ27335 | 13 | CTL-003 in CDBG when using the C debugger on a DLM built using CBLD. |
| PJ27337 | 14 | A ZDVSN functional message, issued for a realtime device, may cause a CTL-E07 to occur. |
| PJ27339 | 13 | The release of High Level Assembler (HLASM) ver 1.3 has changed the layout of the ADATA records used by the utility GNTAGH. |
| PJ27340 | 13 | CGLOBA does not calculate size of Synchronizable Global records correctly. |
| PJ27342 | 13 | CAN NOT EDIT REGISTERS IN THE PROGRAM MONITOR |
| PJ27343 | 13 | Continuous data collection (CDC), added by PJ27095, passes an incorrect value to the CDC relational database table. |
| PJ27344 | 13 | APAR PJ26273 added the TMSLC macro to CZXF. This causes ZCSON and ZRHLD to take a SNAP 2014 when these messages are entered prior to 1052 state. |
| PJ27345 | 13 | PJ26955 introduced a new segment CSWSCE but no entry was made in SPPGML. |
| PJ27346 | 13 | With APAR PJ21791 applied, select() times out when issued for readability and readiness for writing on the same socket. |
| PJ27347 | 13 | The ZMCPY routine which checks for modules on the same channel/control unit may yield incorrect results. |
| PJ27351 | 13 | Enhancements to TPF MQSeries Local Queue Manager Support to include Slow Queue Sweeper and Move Messages. |
| PJ27352 | 14 | With PJ27023 applied, a CTL-3E0 dump may occur when performing a Loader General File (LGF) IPL of the TPF system. |
| PJ27353 | 13 | CTL-024 from CONN during System Restart. Other system errors, such as CTL-8 or CTL-D upon automatic recreation of a corrupted collection, may also occur. |
| PJ27354 | 13 | Pool directory migration must be performed to prepare for the future expansion of SON pool file addresses from 4 bytes to 8 bytes. |
| PJ27355 | 13 | Provide fixes for TPF/MQSeries channel problems |
| PJ27358 | 13 | Time Available Supervisor (TAS) shutdown indicators for ECBs and common blocks are reversed in output report. |
| PJ27359 | 13 | When world trade message switching is gen'd, CVIQ can copy spurious messages to XSC1, resulting in CTL-4 dumps. |
| PJ27360 | 14 | Sense data was missing from TCTL0001 message. This error is caused by APAR PJ24563. |
| PJ27361 | 13 | Because of APARs PJ26377 and PJ26757, unresolved references for memcmp, strncat, strncmp, and strncpy functions may occur during prelinking and linking TPF modules. |
| PJ27362 | 13 | The PUT level in the dumps need to be updated to PUT13. |
| PJ27363 | 13 | Various CTL dumps(e.g. CTL-1, CTL-2, CTL-4) may occur with PJ26848 applied. |
| PJ27367 | 14 | Provide TPF support for the long long data type in standard C/C++ library functions. |
| PJ27373 | 13 | After applying PJ27087, the C header C$CK1KE does not match the assembler DSECT CK1KE. |
| PJ27375 | 13 | With PJ25780, defining an MQP may result in Unexpected Error 32 and cycling to NORM state may result in Unexpected Error 35. |
| PJ27376 | 14 | Size of control program is too big in dumps. |
| PJ27377 | 13 | With PJ27023, the MQ dead letter queue header (DLH) does not have date, time, and application name fields set up for messages put on the dead letter queue (DLQ). |
| PJ27379 | 15 | Fix TCP/IP offload (PJ21791) problems including a CTL-571 system error, connect() API timing error, CTL-573 out of select(), 9113 snapc() dumps, and CTL-3 system error during shutdown() processing. |
| PJ27380 | 14 | Data store manipulation enhancements are needed for TPF collection support (TPFCS). |
| PJ27383 | 13 | This APAR implements functional enhancements to the TPF C Debugger for VisualAge Client, the TPF Assembler Debugger for VisualAge Client, and the TPF Performance Execution Trace Analyzer for VisualAge Client. |
| PJ27384 | 13 | With PJ27023, MQSeries checkpointing causes recovery log activity even though there is no queue manager activity. |
| PJ27385 | 14 | During LU 6.2 session activation, we take certain steps to determine which path to start the session across. If the CDRM parameter was specified on the ZNCNS INIT functional message for the session we are starting, we should always attempt to use that path first. |
| PJ27386 | 13 | An OPR-C6203B system error (no conversation control blocks available) occurs when the LU 6.2 mapped conversation cminit() function is issued. |
| PJ27387 | 13 | Infrastructure for 32-Way Loosely Coupled Support SPE. |
| PJ27388 | 13 | The assembler debugger does not support the Terminate menu item. |
| PJ27389 | 14 | With APAR PJ27389 applied, TPF incorrectly builds the Network Name control vector, Control Vector 0E (CV0E). |
| PJ27390 | 14 | CTL-E2 during cycle down when TPFCS tries to delete PIDs, CTL-00C out of ECBs because of TPFCS queuing to do an immediate delete when running MQ, malloc failure when running RECOUP on a very large collection of PIDs. |
| PJ27391 | 15 | MPIF startup may not always work due to timing problems using ESCON CTC. |
| PJ27392 | 13 | CTL-4 occurs when a long DLL function or variable name not found |
| PJ27393 | 13 | Provide TPF data event control block (DECB) support to remove the limitation of 16 ECB data levels for file access and to provide APIs to access files with 8-byte file addresses. |
| PJ27395 | 14 | Incorrect output in Message Summary report when more than 204 CCW areas are defined for ALS/NCP/CTC devices |
| PJ27396 | 14 | A CTL-704 will unnecessarily occur during MPLF lock retry processing that receives a return code of X'16'. |
| PJ27398 | 14 | A CTL-I09400C may occur when using the C debugger and selecting next representation on a variable type char * in a struct. |
| PJ27400 | 14 | CEFR0331E, no formatting at beginning of volume, may be misleading. |
| PJ27403 | 14 | Ease testing of record cache support (RCS) in a Base only environment. |
| PJ27405 | 14 | A SNAP EB dump can occur if an MQCONN is done when the queue manager is not defined. This problem was injected by APAR PJ22434. |
| PJ27406 | 14 | Multiple workstations can not trace the same LNIATA. |
| PJ27407 | 14 | Enhancements to TPF MQSeries Queue Manager support to include support for the MsgId field in the MQMD. |
| PJ27409 | 13 | Recoup reports TPFCS record IDs FC15 and FC18 as being lost. Additionally, the last entry of the pool reuse table is not being initialized correctly. |
| PJ27410 | 14 | 3590 messages reference media maintenance procedures which are not valid for 3590 devices. |
| PJ27411 | 14 | CTL-600E dump introduced by PJ25094 does not include the VFA control areas necessary for problem determination. |
| PJ27412 | 14 | With HPR support (APAR PJ25760) installed, unpredictable results can occur during APPN session startup when we have to pass the LOCATE to the host owning the CP-CP sessions. |
| PJ27413 | 14 | After PJ26707 was applied an LTR instruction was deleted, erroneously, in CJIR. |
| PJ27414 | 14 | Entering the ZFCAP functional message with the MOD parameter specified after ZFCAP ALL processing is completed will cause exception recording to stop on any active processor that is not participating in the capture. |
| PJ27415 | 13 | Recoup does not chain chase the new communication record type for the SRT introduced in PJ27387. |
| PJ27416 | 14 | A monitored expression with a logical AND or a logical OR is not evaluated corretly in the C debugger. |
| PJ27421 | 14 | Because of PJ25094, ECBs may hang waiting for I/O operations that are queued in the BCA queue; incorrect branch in Record Id 0 post interrupt handler. |
| PJ27422 | 13 | The loaders enhancement for the TPF Assembler Debugger for VisualAge Client enables OLDR and TLDR to load ADATA files with E-type programs for use by the assembler debugger. |
| PJ27423 | 14 | Realtime segments CWGX and XLEE set up interface to error routines XLZ1/XLZ4 incorrectly. This results in a CTL-2E dump, and may also lock out any further ZACRS commands. |
| PJ27425 | 13 | Recoup may find lost pool addresses (FC16 and other record IDs) that are actually in use by TPFCS if the DS_RESTARTLOG collection, which was provided with APAR PJ26143, exists. |
| PJ27427 | 13 | Due to PJ27083, the CFCA0002E error message is received for processor shared logical record caches when a coupling facility is taken out of the locking configuration. |
| PJ27428 | 14 | CTS7 sets recvfrom() tolen parm incorrectly and always sets the recvfrom() caller's key to zero. |
| PJ27429 | 15 | The name of the system state status file is not correct. The name of the state status file is being set to 00LNIA+ cpuid. It should be LNIATA+cpuid. |
| PJ27430 | 14 | Add a user exit to the Multi-Mod copy selection/validation routine. |
| PJ27431 | 13 | With PJ27351, under certain conditions, messages may be lost or duplicated in TPF MQSeries queues. |
| PJ27432 | 14 | When the ZRTDM modify functional message is entered with a comma instead of a blank as a delimiter, a CTL-4 error occurs. For example, ZRTDM mod,recid-cd,log-no |
| PJ27434 | 14 | Problem with Debug on System Error (PJ26600) and selective activate. |
| PJ27436 | 14 | Use of CE1CPD field may not provide the correct CPU ID on which the ECB is running. |
| PJ27438 | 13 | With OSA-Express support (APAR PJ27333) applied, the SIOCGIFFLAGS command of the ioctl() API can return incorrect results, causing certain TCP/IP applications to fail. |
| PJ27439 | 14 | ESS device dismount may discard desired cache data. |
| PJ27440 | 14 | This internal APAR is caused by PJ26008 which is the C/Asm debugger cooperation code. With PJ26008 applied, the assembler debugger is active too long when passing control to the C debugger for programs that contain hooks. |
| PJ27441 | 14 | Breakpoints are not detected after the 'Run Execution' request is handled. |
| PJ27443 | 13 | With TPF DECB support (PJ27393) applied, a CTL-4 dump may occur out of CCFADC during processing of a DASD find or file request. |
| PJ27444 | 14 | As a result of PJ22868, dumps that are written to tape may not be formatted correctly. |
| PJ27445 | 14 | Due to PJ21791, CLAW ECBs are incorrectly formatted as permanent storage in dumps. |
| PJ27446 | 14 | Usage of RLOG records may lead to VPARS full condition. |
| PJ27449 | 14 | When the C debugger is used to step into a library function with an ordinal of 0, the Assembler debugger is (improperly) invoked for CSTRTL. |
| PJ27451 | 14 | TCP/IP Native Stack support (APAR PJ26683) and OSA-Express support (APAR PJ27333) functional message enhancements. |
| PJ27452 | 14 | System error CF4645 displays with a prefix of E instead of I. |
| PJ27453 | 14 | Perfomance problem when using the file system with the cpp code that uses cout. This was injected by PJ26188. |
| PJ27454 | 14 | Due to PJ25094, the VFA RST chains can become corrupted when running high VFA activity with a small number of buffers, resulting in a continuous loop or CTL-571 while performing FINDRST processing in CVF3. |
| PJ27455 | 14 | If the ZTPLF UNLOAD functional message is issued to a virtual tape server (VTS) drive while a volume is being loaded, the volume serial number (VSN) reported in message CORD0205I is blank. |
| PJ27456 | 13 | CTL-003 from CTKS because of PJ27422. |
| PJ27458 | 14 | Apar PJ27458 is applied onto PJ27214. This apar fixes a compilation warning from the SYSLOG Daemon created by one of the signal handlers and it also fixes the SYSD0004E message. |
| PJ27460 | 14 | RLOG performance is slow for worst case scenario. |
| PJ27461 | 14 | While processing a FDE chain, a CTL-571 may result in CCENBK if a FDE chain pointer points to a data record in VFA. A repetitive loop may also occur due to an invalid block address in IPROC_EXITO. |
| PJ27462 | 14 | In the Random File Access Summary report, VFA 'with I/O' numbers are higher than VFA 'total' for data reads and total accesses. |
| PJ27468 | 14 | When using ZNETW ACTIVATE or ZNCNS INITIALIZE, there is no way to have an LU use an APPN link once the CDRM parameter has been coded on either functional message for that LU. |
| PJ27469 | 13 | Provide support for Online Recoup and Pools Maintenance. |
| PJ27470 | 14 | With PJ27246 applied the text of the display header line is missing. |
| PJ27471 | 13 | INCORRECT VALUES FROM FSCANF OF FLOATING POINT NUMBERS. |
| PJ27473 | 13 | V2R9 compiler option ANSIALIAS may generate incorrect code. |
| PJ27474 | 13 | CTL-00C from cinet7 occurs when a loadset is activated or deactivated after PJ27363 is applied. |
| PJ27475 | 14 | The Coupling Facility Distribution List Block and the Lock Sequence Control Table are not being initialized to zero correctly. |
| PJ27477 | 14 | CTL-05A system errors can be received on tape devices when valid status is returned. |
| PJ27478 | 14 | C6202E dump occurs in CHDD when FMH7 with conditional end bracket (CEB) is received after TPF has rejected remote LU6.2 bid request with 0814 sense code. |
| PJ27479 | 14 | Some TPF source-shipped C header files and C++ header files produce a nonzero return code when compiled by themselves. |
| PJ27480 | 14 | 3270 Prime CRAS fallback to a CRAS device needs to consistently mark line 01 as invalid in order to properly allow an operator to revalidate the Prime CRAS address on line 01. |
| PJ27481 | 14 | With PJ26575 applied, ECB corruption may occur during system error processing. Furthermore, dump record validity check errors may occur when post processing RTA/L tapes containing dump output. |
| PJ27482 | 14 | With APAR PJ26686, multi-mod copy, applied if a request is made to restart a copy which is not active the Prime Mod may be taken off line. |
| PJ27483 | 13 | With PJ27393 applied, ACPL cannot complete. |
| PJ27484 | 14 | Unlimited Pool Segment Support. |
| PJ27491 | 14 | Enhancement to add a program interface to move a Virtual IP Address (VIPA) from one TPF processor to another in a loosely coupled complex. |
| PJ27492 | 14 | A CTL-4 may occur from segment ASF1 when the system scans for set buffer address (SBA) characters in an overflow block. |
| PJ27493 | 14 | A CTL-002 error may occur if the volume to be mounted does not contain a valid VOL1 record. |
| PJ27503 | 13 | PJ27180 does not put DLLs in the PARS list. |
| PJ27505 | 14 | A CTL-001 system error occurs when a SENDC T macro is issued and APAR PJ26873 is applied. |
| PJ27508 | 14 | Due to PJ25094, CLM0 may not restore ALASC base register after an ENTRC call. |
| PJ27510 | 14 | When a ZMCPY ALL is issued, a copy lock that doesn't exist is unlocked at copy end of job. |
| PJ27522 | 13 | Unresolved references for lower-case memmove function occurs during prelinking and linking TPF modules that were compiled using the OS/390 Version 2 Release 9 AGGRCOPY(OVERLAP) compiler suboption. |
| PJ27523 | 14 | Due to PJ25094, the current EHT chain was not ended and a new one started when the ECB hold count in CE1HLD became zero on a FILUC request. This resulted in CTL-21 errors. |
| PJ27524 | 14 | PJ27524 fixes source in PJ27214. The fix addresses some problems with the Syslog Daemon, Bind-Resolver, and Internet Daemon. |
| PJ27525 | 14 | With PJ20868 applied, if a request is made to turn off a user exit function which is already off, the function will be set on. |
| PJ27526 | 14 | TPF may take a CTL-1 system error dump when running MQSeries in a tightly coupled system due to simultaneous updates to the MQSeries low log sequence number (LLSN) chain. This error is introduced by APAR PJ27023. |
| PJ27530 | 14 | Support for TPFDF Common Entry Point co-requiste APAR PQ32210. |
| PJ27531 | 14 | DASD Channel Check recovery enhancements |
| PJ27532 | 14 | Use of CE1CPD field may not provide the correct CPU ID on which the ECB is running. |
| PJ27534 | 14 | A CTL-4 may occur out of segment CMTF when using the ZNRPT functional message. |
| PJ27536 | 14 | The TPF MQSeries resource manager shipped with PJ27023 slows down the advancement of system recovery point in the recovery log even when the system has no MQSeries activities. |
| PJ27538 | 14 | After applying PJ25129, a failed ZTMNT with overlay may leave an ALT tape write protected. |
| PJ27539 | 14 | APAR PJ27214 (FIFO/NamedPipes) was shipped with cbster.c missing. |
| PJ27540 | 14 | PJ27383 version of TPFDBG produces an invalid LST file |
| PJ27543 | 14 | Support the new feature of Selective Attention Message Suppression for the 3494 Virtual Tape Server. |
| PJ27547 | 15 | Various CTL dumps (including CTL-2 and CTL-4A0 dumps) can occur with PJ25583 applied when SNA read buffers for ALS/NCP links fit exactly in a 4K frame. |
| PJ27548 | 14 | Segments may not assemble without warnings using the latest version of the High Level Assembler (HLASM). |
| PJ27552 | 14 | When using the ADATA feature of the online loaders, the ADATA file is not found when attempting to debug a segment within a library module. This APAR corrects this problem introduced by APAR PJ27422. |
| PJ27553 | 14 | Loss of system heap due to connection resets on a TPF MQSeries receiver channel. |
| PJ27555 | 14 | Messages put to the dead letter queue (DLQ) from a transmission queue contain an MQSeries Transmission Queue Header (MQXQH) and do not have the correct format in the message descriptor (MQMD) of the message. |
| PJ27557 | 14 | APAR PJ27440 causes an error when issuing file system functional messages. FILE0002I 11.28.26 START OF ERROR DISPLAY FROM ... Cannot fork: pwd: Invalid argument |
| PJ27558 | 14 | With APAR PJ27367 applied, the atof() and strtod() functions may produce unexpected behavior. |
| PJ27559 | 14 | An enhancement to TPF MQSeries local queue manager support is needed to stop a channel if the channel cannot process certain undeliverable messages. |
| PJ27562 | 15 | System error dumps are aborted with sense data that indicates a temporary error and tapes are not being unloaded if the tape becomes full during a system error dump. |
| PJ27563 | 14 | With the MQSeries resource manager defined, a CTL-4 system error followed by a CTL-3 system error occurs when the performance analyzer is activated. The problem is caused by APAR PJ27383. |
| PJ27565 | 14 | Named Pipes device driver does not handle get_raw_pipe_storage() failures properly. |
| PJ27566 | 15 | With APAR PJ25375 applied, a gethostbyname() call issued for an alias will not return the canonical (official) name for the host in the correct field of the hostent structure. |
| PJ27567 | 14 | The appended dump message comes out incorrectly if there are multiple consecutive carriage returns in it. |
| PJ27568 | 14 | With APAR PJ26161 applied, CPU utilization on the main I-stream and CCLAW1/CCLAW3 activity increase. |
| PJ27570 | 14 | After installing PJ25098, CTL-C system outages may result after recoup completes. |
| PJ27571 | 15 | A tape switch may not complete if an Input List shutdown condition is encountered. |
| PJ27572 | 14 | Enhancements to TPF MQSeries Queue Manager support to include support for the dead letter queue name (DEADQ). |
| PJ27573 | 14 | Correct timing problems causing IP message table (IPMT) pointer corruption in TCP/IP native stack support (APAR PJ26683). |
| PJ27574 | 14 | Due to PJ26146, I-stream numbers will appear incorrectly for cross list entries (D-CROS) in the macro trace section of formatted dumps. |
| PJ27575 | 14 | With PJ27334 applied, a non-catastrophic 6C2 dump may occur in segment CLMN. |
| PJ27578 | 14 | The C debugger uses an excessive amount of storage on "step overs". After applying APAR PJ27639, block variables in C++ class members cannot be displayed. |
| PJ27580 | 14 | A CTL-4 from CUD1 of the assembler debugger occurs upon a stepinto. |
| PJ27582 | 14 | The use of the CE1CPD field in the APPN communication segments may not provide the correct CPU ID on which the ECB is running. |
| PJ27583 | 14 | With APAR PJ26686 (Multi-Mod Copy) applied, the copy abort function may not return the copy module VSN to its original value of 'aa9999'. |
| PJ27584 | 14 | During EXITC processing a CTL-DB0112 dump can follow immediately after a CTL-8 dump. |
| PJ27585 | 14 | Unable to set monitor for STL string (PJ25632) |
| PJ27586 | 14 | An entry in the CLAW device table is not copied to the in-core CLAW table after decreasing the value of CLAWADP in CTK2 and loading the new keypoint 2 to the system. |
| PJ27588 | 14 | With multiple module copy support (APAR PJ26686) applied, the copy code uses a hardcoded value for the number of DASD modules defined per control unit. |
| PJ27589 | 14 | SNAP dump 9100 occurred because socket sweeper was not activated after hard IPL. This problem is introduced by PJ24525. |
| PJ27593 | 14 | CTL-4A0 dumps may occur when an APPN LOCATE spans across multiple PIUs with APAR PJ24916 applied. |
| PJ27594 | 14 | ZPLMT may result in CTL-5A dumps if end-of-volume is hit with an unblocked PLM tape. |
| PJ27595 | 14 | Entering the ZLSTP functional message against a 3270 local line that has a hardware problem can result in an endless loop, which prevents the ZLSTP functional message from being completed. |
| PJ27596 | 15 | A CTL-001 dump may occur when processing a SNA force deactivate virtual route (NC-DACTVR) path information unit (PIU). |
| PJ27602 | 14 | With APAR PJ23378 applied, a CTL-E08 dump can occur out of CHDF when data is received that satisfies an outstanding LU 6.2 ACTIVATE_ON_RECEIPT request. |
| PJ27604 | 14 | Assembler Debugger is unable to trace transfer vectors. |
| PJ27605 | 14 | The ZDPAT functional message may incorrectly show that a program is active when it is not. |
| PJ27606 | 14 | Various changes to Online Recoup and Pool Directory Update (PDU) |
| PJ27607 | 14 | iovec structure and writev function call are defined in both socket.h and uio.h header files. |
| PJ27608 | 14 | With TCP/IP Native Stack applied (APAR PJ26683), locking problems can occur in IP over CDLC I/O processing. |
| PJ27611 | 14 | An invalid record may be written to a blocked RTA tape during clock restart. |
| PJ27612 | 14 | When CUDN was released in PJ27383, some code anomilies were in place which prevented it from compiling with a return code of zero. This APAR corrects the coding issues. |
| PJ27614 | 14 | A CTL-749 system error will result when a ZBROW NAME DISPLAY ALL functional message has a pending ZPAGE functional message that times out. |
| PJ27617 | 14 | Individual IP trace support. |
| PJ27618 | 14 | With TPF data event control block (DECB) support (PJ27393) applied, incorrectly coded DECBC macro calls may not be identified during assembly. |
| PJ27619 | 14 | Internet Daemon (INETD) performance enhancement. |
| PJ27621 | 14 | Issuing a ZMATP DISPLAY ASCU RHOST-xx with a MATIP session started does not correctly display the ASCU list associated with the hostname. |
| PJ27622 | 14 | "MQSC9998E UNEXPECTED CHANNEL ERROR CODE 1073766802" is not documented with TPF MQSeries. |
| PJ27624 | 14 | With APAR PJ25375 applied, ZDTCP PING may time out when the destination host is available. |
| PJ27625 | 14 | Enhancement to support the Fast Ethernet OSA-Express adapters. |
| PJ27626 | 14 | Two warnings caused by CHECKOUT(CAST) and two caused by #define _POSIX_SOURCE after affected #includes. This problem was injected by PJ25880. |
| PJ27627 | 14 | Provide support for select classes of the IBM Application Support Class Library. |
| PJ27628 | 14 | When using TCP/IP Native Stack (APAR PJ26682), the socket cycle-up user exit, CLCV, is never called. |
| PJ27633 | 15 | SNAP dump 0000EB will occur if applications issuing C-language LU 6.2 APIs do not have authority to issue restricted macros. |
| PJ27634 | 14 | This APAR adds the ability to read (parse) Extensible Markup Language (XML) data on the TPF 4.1 system. |
| PJ27635 | 14 | Using the storage monitor from the ASM debugger, ASCII or character data is processed as HEX data and written to memory. If valid HEX data is NOT found, the user receives an "Invalid Data" error. Fixes PJ25981. |
| PJ27636 | 14 | Because APAR PJ27469 obsoleted the Data General File (DGF), related code needed to be removed and obsoleted. |
| PJ27638 | 14 | A CTL-4613 catastrophic dump may occur when using a coupling facility (CF) for locking. Also, miscellaneous updates to APAR PJ26707. |
| PJ27639 | 14 | Debugger not displaying DLL function variable. |
| PJ27647 | 14 | PJ27469 has allocation errors in IBMPAL and SPPGML, a FONTA macro commented out in BAM0, and a problem in the BSYNC macros. |
| PJ27648 | 14 | TO2_convertEBCDICtoBinPID attempts to convert invalid characters and returns garbage data instead of an error. |
| PJ27650 | 14 | Diagnostic tools enhancement, provides the ability to determine if a given socket or an OSA-Express connection is in a hung state. |
| PJ27660 | 14 | With PJ27023 applied, a CTL-94000 may occur during TPF restart if CUIU is entered before the ISO-C library has been loaded. |
| PJ27664 | 14 | Because of APAR PJ26967, the spelling of the word "exception" in message I094204 needs to be corrected. Additionally, do a #pragma export of __unexpected() for STLport. |
| PJ27665 | 15 | The E-type program count is limited to 32767 in message ACPL0006I. |
| PJ27667 | 15 | The IBMSVC macro needs to be updated for new KEYRC parameter. |
| PJ27670 | 15 | Extraneous COSK0001E DEVICE cuu NOT READY messages are receieved for automount enabled tapes that are attached to a 3494 tape library. |
| PJ27672 | 16 | MQ Series support messages MQSC9996E and MQSC9997E do not exist in the documentation. In addition, these two messages insufficiently explain what errors have occurred. More of an explanation has to be added to each error to better explain why the error is being created. |
| PJ27673 | 14 | The Step into macro causes the run to end. |
| PJ27674 | 15 | With PJ27023 applied, looping CTL-C catastrophic dumps may occur during restart, preventing the TPF system from reaching 1052 state. |
| PJ27679 | 14 | TPF activate_on_receipt load balancing support for sockets. |
| PJ27680 | 14 | With PJ27023 applied, CTL-4 taken out of CMQR when receiving a nonpersistent message over a FAST Receiver channel. |
| PJ27682 | 14 | With PJ27023 applied, the TPF MQSeries sweeper does not get control to free up resources during input list lockout conditions. |
| PJ27683 | 14 | A program may get CTL-4 system error when issuing the longjmp function after applying APAR PJ26967. |
| PJ27684 | 14 | There exists a failure to recognize an FID4 transmission header in path information unit (PIU) trace processing. |
| PJ27685 | 15 | A CTL-4 may occur since ZCHCH does not verify the input displacement of a chain with different pool types. |
| PJ27686 | 14 | 32-Way Loosely Coupled Pool Support. |
| PJ27687 | 14 | A remote queue manager may shut down its receiver channel if a TPF MQSeries sender channel fails to correctly convert the version field in the transmission queue header of a message it sends. |
| PJ27688 | 14 | The MATIP data store does not get recouped properly. Also, a MATP0022E HOST FILE ERROR -17 may result when defining host names and agent set control units (ASCUs). |
| PJ27689 | 14 | Message COSK0200I has been replaced by message COSK0396A because user action is required. |
| PJ27691 | 14 | CTL-004 from exit processing when DLLs in use. |
| PJ27692 | 14 | Provide a field in the C startup code for customer use. |
| PJ27693 | 15 | LU 0 messages sent using the ROUTC macro may be sent out of order. |
| PJ27696 | 14 | With PJ27351 applied, TPF MQSeries sweeper monitor program CUIU accesses a SWB after it has been released. This can result in a CTL-004 dump. |
| PJ27698 | 14 | With PJ27023 applied, a CTL-3 from CMQM may result during TPF MQSeries RESTART |
| PJ27702 | 14 | Incorrect headers appear on some FILE detail reports in a multiple subsystem environment if FILE COMPAR is not optioned. |
| PJ27703 | 14 | As a result of APAR PJ27469, the active ECB counts in CA2NEBA may be inaccurate in a TPF complex with more than one subsystem. |
| PJ27706 | 15 | CTL-749 taken while running MQ on PUT11 system. |
| PJ27708 | 14 | With PJ27023, the TPF MQSeries resource manager neglects to free ECB heap resulting in slow frame depletion for long running ECBs. |
| PJ27709 | 15 | With APAR PJ27023 applied, TPF MQSeries may cause a CTL-10 system error dump out of CMQR when the batch size of a channel is too big. |
| PJ27713 | 14 | A CTL-4 system error dump may occur in CLM9 during ZCFLK MIGRATE functional message processing. |
| PJ27714 | 14 | With APAR PJ27491 applied, compiler errors may occur when including the socket.h header file. |
| PJ27716 | 14 | With TPF data event control block (DECB) support (APAR PJ27393) applied, applications that issue the FAC8C macro using register 7 (R7) as a parameter will receive a CTL-3 system error. |
| PJ27717 | 17 | Error message FILE0097E occurs for 3270 SNA terminals logged into an application that has the SMP type indication on in the RCAT (RCAT2SMP), and that issue ZFILE commands because mixed-case copying is not performed (APAR PJ25589). |
| PJ27719 | 14 | IP over CDLC polling enhancement. |
| PJ27724 | 14 | Segment CYAA, shipped with APAR PJ27469, causes recoup functional messages to reference the incorrect recoup keypoint. |
| PJ27726 | 14 | With APAR PJ26693 applied, a CTL-4 out of program CMOA prevents MATIP from retrieving a WGTA entry until the next IPL of the system. |
| PJ27727 | 15 | A CTL-004 occurs when ZAFIL, ZAREC or ZAPGM functional messages are issued with validation data that extends past the end of the record. |
| PJ27728 | 15 | Add user exit to support customer data recovery software. |
| PJ27730 | 15 | With PJ27351 applied, there is a possibility that the sequence counter for accessing a TPFCS BLOB collection during a TPF MQSeries sweep process is incorrectly updated causing a TPFCS error to occur and possibly a CTL-200C8. |
| PJ27737 | 15 | If errors are encountered during ZFRST processing and message: FRST0098A TAPE ON cuu - NOT A RESTORE TAPE --REMOVE is issued, restore will not end properly. |
| PJ27740 | 14 | Some SIP Stage II jobs to compile offline segments could fail because certain OS/390 header files are not available to the job. |
| PJ27746 | 14 | With APAR PJ27530, CTKO does not build the DBTAB table in restart, CCNUCL gives CTL-4 dumps in ZINET processing, CCENBK has assembly errors, CFMDC has assembly errors without TPFDF, and segments are obsoleted in SPPGML. |
| PJ27747 | 14 | The PUT level specified in the dumps needs to be updated to PUT 14. |
| PJ27758 | 14 | TCP/IP native stack support (APAR PJ26683) for socket APIs activate_on_receipt (AOR) and activate_on_accept (AOA) does not save and restore the caller's subsystem userid correctly. |
| PJ27759 | 14 | Because of APAR PJ26064, a CTL-004 can occur in CHDDEL when freeing a DLL that has no static storage |
| PJ27760 | 15 | With PJ26686 applied the ZMCPY time initiated status display is not always activated. |
| PJ27761 | 14 | PJ27761 fixes the ioctl() api for native stack when an SIOCFIGFLAGS call is made. The problem occurred because the SIOCGFFLAGS call wrote beyond the IFREQ structure that was passed. |
| PJ27762 | 14 | When a non-MDBF system does a ZRIPL from NORM state, a CTL-22 will occur in segment BLOG on cycle to NORM following the IPL. |
| PJ27764 | 14 | With PJ27351 applied, falling back a TPF MQSeries local queue manager from a system with Turbo MQ applied (PJ27023) to a system without PJ27023 during migration mode will result in TPFCS errors. |
| PJ27769 | 15 | The @RCOUP global is no longer used and should be removed from the system. |
| PJ27772 | 14 | The ported list.h header file is in the wrong hfs subdirectory because of APAR PJ27214. |
| PJ27773 | 14 | Cannot IPL Loosely-Coupled system with PJ26826 applied. |
| PJ27774 | 15 | The tpf_decb_sys structure defined in i$decb.h, introduced by TPF DECB support (PJ27393), does not match the definition in idecb.mac. |
| PJ27775 | 15 | Various header files and C segments fail to compile. |
| PJ27779 | 15 | Routing of TPF MQSeries operator messages are incorrectly sent to application terminals and operator messages are not correctly sent to TPF functional support consoles. |
| PJ27784 | 14 | TPF Internet mail server infrastructure provides internal TPF updates to enable TPF Internet mail server support. |
| PJ27785 | 15 | 32-Way Loosely Coupled Processor Support |
| PJ27786 | 15 | Remove user-modifiable code from the CISO library and move OBJONLY segment CFTOK40 from the COMX library into the CISO library. |
| PJ27789 | 15 | A CTL-03 system error may occur from segment CMTL because of an incorrectly set protection key. |
| PJ27790 | 15 | With PJ27355 applied, starting TPF MQSeries sender channel may result in the error message MQSC9998E or MQSC0007E because the transmission queue associated with the sender channel is not defined. |
| PJ27792 | 14 | When individual IP trace support (APAR PJ27617) is applied a CTL-1 can occur. |
| PJ27793 | 15 | 4505 to 3270 CRT output simulation display error. |
| PJ27797 | 15 | Following the stop of an TPF MQSeries sender channel, the sender channel can automatically restart again. |
| PJ27799 | 15 | Provide an enhancement to allow OSA-Express support (APAR PJ27333) to be applied to a back-level system. |
| PJ27801 | 15 | A CTL-D4 out of system error processing may occur as a result of APAR PJ25496. |
| PJ27804 | 14 | Various enhancements and fixes needed for Recoup (PUT 13). |
| PJ27806 | 15 | BLOG may cause a CTL-6E8 while attempting to file a release block during pool cycle down. |
| PJ27808 | 15 | When using ZDPGM to display a program, the program may be displayed in the disassembled view even if the INSTR parameter is not specified by the operator. |
| PJ27813 | 15 | Unpredictable results may occur following system error 01F01F, issued from segment UIO2. |
| PJ27814 | 15 | DASD activity monitor (CYED) does not run during input list shutdown. |
| PJ27816 | 15 | With APAR PJ26914 applied, EXITC processing may corrupt the prefix page area leading to unpredictable results. |
| PJ27818 | 15 | When a non-loosely coupled system is IPLed using load clear and a Sysplex Timer is attached, a confirmation of the TOD clock is requested. |
| PJ27819 | 15 | With TCP/IP native stack support applied (APAR PJ26683), a bad branch can cause an IP over CDLC link to break. |
| PJ27820 | 15 | With TPF DECB support (PJ27393) applied, an OPR-0DECB0 system error dump may occur during processing of certain macros that accept a DECB as input. |
| PJ27822 | 15 | After installing PJ27328 the SIP macro SPPROC generates TPFDF datasets in the offline PROC BSSOFL when TPFDF is not defined to the system. |
| PJ27824 | 15 | Expand Stacks causes a CTL-3 system error. |
| PJ27829 | 16 | With APAR PJ26693 applied, a CTL-3 may occur when stopping and starting MATIP host names. Enhancement to ZMATP STOP RH-hn command to close all sessions using the specified host name. |
| PJ27830 | 15 | Enhancements to TPF MQSeries Local Queue Manager support to allow altering channel socket buffer size, specifying a local IP address for sender channel, and balance all AORed channel ECBs to all i-streams. |
| PJ27831 | 15 | A software problem exists in routine CJIVSSST (CCRCSC) at label OVERLOOK when searching the RCS Subsystem Status Table overflow area. |
| PJ27835 | 15 | Some TPF C header files may produce a nonzero return code. |
| PJ27842 | 15 | The C Debugger may cause corruption of C++ function parameters, resulting in unpredictable behavior. |
| PJ27844 | 15 | Whenever a resume error occurs during MQSeries commit processing, message MQSC9997E erroneously indicates it was an error in suspend processing. |
| PJ27845 | 15 | With TCP/IP Native Stack support, TPF may not recognize a FIN when the FIN is received out of order. |
| PJ27846 | 15 | Data loss after Pinned Data condition. |
| PJ27847 | 15 | Support for TPFDF APARs PQ42198 and PQ46459. |
| PJ27848 | 15 | Miscellaneous fixes to Recoup for PUT 14 (APAR PJ27804). |
| PJ27851 | 15 | SMDT entries for CF tables are not setup correctly. |
| PJ27852 | 15 | LU 6.2 sessions may become hung when using TPF Application Requester (TPFAR). |
| PJ27853 | 15 | The symptoms of this APAR are a CTL-3 followed by a CTL-75 when running the performance analyzer. In some cases, a message may appear on the prime CRAS that too many files are open. |
| PJ27854 | 15 | Performance enhancement to TPF MQSeries local queue manager sweeper to use TPFCS cursors. |
| PJ27855 | 15 | Unresolved external references occur when link editing C++ (cpp) programs that have been compiled with the syslog.h header as a result of PJ27214. |
| PJ27856 | 15 | A CTL-3 system error may occur on calls to math functions with the implementation of APAR PJ21337. |
| PJ27857 | 14 | Directory capture does not correctly capture in-core directories on secondary processors and the descriptor for #SONSP does not include the anchor for the 4DP-D pool section. |
| PJ27858 | 16 | With PJ27023 Turbo MQSeries applied, recoup errors are reported from MQ collections after ZMQSC MIGRATE COMMIT. |
| PJ27859 | 14 | The ZSOCK DATAFLOW function, added by PJ27650, incorrectly inactivates a socket. |
| PJ27861 | 14 | There is no check for extraneous parameters for GROUP and INDEX macros. In the INDEX macro, there are byte count problems for FI and FA with TYP= C, F and M. These problems exist in APAR PJ27469 and PJ27606. |
| PJ27862 | 15 | The C Debugger can hang after changing the storage monitor style. This problem was introduced by APAR PJ25632. |
| PJ27863 | 15 | Secure Sockets Layer (SSL) support for TPF. |
| PJ27865 | 14 | TPF Internet mail server support provides a set of servers that implement the standard Internet mail protocols on the TPF 4.1 system. Users, or mail clients of these servers, send and retrieve e-mail. |
| PJ27866 | 15 | APAR PJ24845 causes an ABEND 0C4 in NLDT when loading load modules. |
| PJ27871 | 15 | VATPF - NO DEBUG USER OPTION NOT RESET |
| PJ27872 | 14 | CPSA fails during SIP assembly in a non-TPFDF system with APAR PJ27530 (TPFDF common entry point) applied. |
| PJ27873 | 15 | CTL-00C dump may occur when processing the ZECBL functional message with the D option specified. |
| PJ27874 | 14 | TPFCS PIDs stored in TPF files may not be recouped & database corruption may occur, an OPR-0200FA TO2 UNABLE TO ALLOCATE MALLOC STORAGE system error may occur running recoup, and TO2_ACTIVE_USER is recouped twice. |
| PJ27876 | 15 | After APAR PJ27619 is applied, a CTL-3 or an OPR-572 may occur when an INETD server entry is deleted. The client count is not correct on the ZINET DISPLAY command if the server is model AOR. |
| PJ27877 | 15 | Unpredictable results may occur when using a TPF collection support (TPFCS) bag or set collection. |
| PJ27879 | 17 | PROBLEM WITH LOWER-CASE STAGE-INITIATED MESSAGE |
| PJ27880 | 15 | Due to PJ25094, a find and hold operation using a record ID of zero for a VFA synchronization candidate in a commit scope can cause a CTL-704 catastrophic system error. |
| PJ27881 | 15 | ZRLMT functional message may fail to transmit message to input LNIATA because RID of input LNIATA is corrupted. |
| PJ27882 | 17 | CTL-6DA FROM IP ROUTER INACTIVATION. |
| PJ27887 | 16 | TPFAR compatibility with DB2 version 6 |
| PJ27888 | 15 | The ZDTCP functional message with the NETSTAT parameter specified does not display the correct information for TCP servers whose listener socket is inactive. |
| PJ27890 | 16 | A CTL-1 dump may occur out of CCIISC when TPF is running at or near 100% CPU utilization in a shared PR/SM environment. |
| PJ27892 | 15 | With TPF MQSeries APAR PJ27023 applied, multiple CTL-E1 dumps from CUIU may occur during cycle down. |
| PJ27893 | 15 | Output message SOCK0011E, displayed by issuing the ZSOCK DISPLAY SOCKET functional message, is incorrect. |
| PJ27894 | 14 | BRTV and B0PA should not be labelled as &SBMASS in GENSIP. |
| PJ27895 | 15 | With APAR PJ27333, unexpected results may occur when filing OSA-Express tables because of an address that is not valid being used to disable and enable I/O interrupts. |
| PJ27898 | 15 | Copy member CT09 in CSCET CCCTIN has hardcoded 'BSS' subsystem name. |
| PJ27899 | 15 | A CTL-3 occurs out of the kill() function due to apar number PJ26188. |
| PJ27900 | 15 | A DB0146 system error does not occur when a TPFDF file is left open with APAR PJ27156 applied and the error message length is incorrect. The stack chaining equates in ECBEQ are now obsolete. |
| PJ27902 | 17 | A CTL-704 may occur during a ZCFLK MIGRATE from coupling facility to control unit. |
| PJ27903 | 15 | After applying PJ27484, pool deactivation may not complete successfully. |
| PJ27904 | 14 | Unexpected CTL-05A system errors when tape stalled-queue processing is enabled after applying PJ27477. |
| PJ27905 | 15 | This APAR enhances the evaluation of symbolic data in two ways: adding symbolic evaluation to the Assembler Debuggers. |
| PJ27910 | 15 | I$BREQ header, created by APAR PJ27469, does notbal symbol evaluator to the Assembler and C Debuggers. |
| PJ27911 | 15 | A CTL-4 dump will occur out of CMVW on the processor that currently owns a movable VIPA that is in the process of bein g moved to another processor if the current processor has more than 500 socket block entries (CK2SOKN field in CTK2) defined. |
| PJ27915 | 15 | A CTL-734 dump occur following a CTL-736 dump due to premature clearing the FCTBINUSE field. |
| PJ27917 | 15 | The File Access Summary report drops significant digits from the weighted message rate because intermediate variables in program JRF4 are too small for current message rates. |
| PJ27918 | 15 | With PJ26707 applied and VFA Sync records in the system, a ZBUFC ALLOCATE IMPLEMENT will issue CTL-38 unlock failure(s). |
| PJ27920 | 15 | State change enabled following ZSLDR on LGF. |
| PJ27922 | 15 | No error checking is performed by FCTBG for record type #APRG8, which was introduced by PJ27422. |
| PJ27925 | 15 | With turbo enhancements for TPF support of MQSeries Local Queue Manager (PJ27023) applied, a CTL-C system error may occur during TPF system restart because of an excessive use of SWBs and system heap. |
| PJ27931 | 15 | PJ26887 unintentionally removed the PJ26714 change in c$to2r.h header. |
| PJ27932 | 15 | Simple Network Management Protocol (SNMP) agent support. |
| PJ27934 | 15 | CTL-3 may occur with PJ26515 applied when a Daemon model server is started. |
| PJ27935 | 15 | TO2_atCursorPut, nextPut, nextRBAfor, and other cursor functions may fail or not work properly for BLOB collections. |
| PJ27941 | 15 | TPFLDR terminates when it finds a C load module that it is unable to load. |
| PJ27944 | 15 | Recovery log OPR-I00C115 catastrophic infinite loop. |
| PJ27945 | 15 | CSS1 problem following APAR PJ27814. |
| PJ27948 | 15 | Output messages sent from the scrolling program may not have the last line of the message displayed. |
| PJ27949 | 15 | The pool recycling command, ZGFSP RCY, is rejected by the system when PDU is active, possibly causing a CTL-11, long term pool section depleted. |
| PJ27950 | 15 | With PJ26686 applied, multi-mod copy error message numbers 229, 231, and 232 are built incorrectly. |
| PJ27951 | 15 | A CTL-004 may occur with BRTP if BRTT and BRTS are not loaded. Records BKD4K and BKDSV are no longer needed. |
| PJ27953 | 16 | TPFAR support for TCP/IP ports other than 446 |
| PJ27954 | 15 | With APAR PJ27786 applied, ICONV fails because embedded calls to the csnam() function will return NULL. The symptoms of this problem include return message "NO RECOVERY" when issuing the ZDTCP PING or ZDTCP TRACEROUTE commands. |
| PJ27959 | 16 | Add defaults of NOSEARCH and NOLSEARCH to MASM |
| PJ27960 | 15 | PJ27180 removed the compiler run-time datasets from the CBLD jobs in the SIP stage II deck. |
| PJ27962 | 15 | APAR PJ27962 adds a PID file specification option for the syslog daemon. Before this fix the PID file for the daemon could only reside in /etc/syslog.pid. Now it can be configured. |
| PJ27966 | 15 | APAR PJ27966 improves the performance and functionality of TPF Internet Mail Server support. |
| PJ27967 | 15 | With OSA-Express support (APAR PJ27333), the TPF system can be IPLed without a default IP address defined to the system. |
| PJ27968 | 15 | With TCP/IP Native Stack support (APAR PJ26683), duplicate socket descriptors can be assigned to new sockets resulting in socket errors. |
| PJ27969 | 15 | With APPN support, APAR PJ19949, session deactivation can hang on VTAM when an APPN session is deactivated with a LOCATE CDTERM-INACT-ORDERLY. |
| PJ27973 | 16 | Debugger cleanup of sockets on hang conditions. |
| PJ27975 | 15 | The Program Allocation Table (PAT) hash table may not be cleaned up properly when the activate of a loadset containing an unallocated program fails. |
| PJ27976 | 15 | Looping 6D9 or 736 dumps out of EXITC processing may occur when running in block check mode. |
| PJ27977 | 15 | DLM call parameters are corrupted when using the assembler debugger. |
| PJ27978 | 15 | A C6204C system error dump can occur when a locate is received. |
| PJ27979 | 16 | TPF MQSeries does not mantain the message descriptor when placing messages on the DLQ. |
| PJ27985 | 15 | If the ZVIPA DISPLAY functional message creates enough output to require a ZPAGE to display more information, a CTL-3 dump in CMV240 results. Prior APAR is PJ27451. |
| PJ27986 | 18 | After applying APAR PJ25098, TPFCS function TO2_setPosition may not set an EODAD error condition correctly. |
| PJ27991 | 15 | With APAR PJ27023 applied, a CTL-D4 system error issued from CMQX or a CTL-3 system error issued from CMQM can occur during TPF system restart if an unknown MQSeries recovery log record is encountered. |
| PJ27992 | 15 | A CTL-4 error may occur from CUPH or any other TPF system or application program that attempts to read an Array or BLOB collection containing a corrupt record. |
| PJ27993 | 15 | With APAR PJ26188 applied, the file system generates an incorrect default /etc/group file. |
| PJ27997 | 15 | While using C debugger and processing a CTL-3, a CTL-1 catastrophic or ISO-C STACK OVERFLOW occurs. |
| PJ28000 | 15 | With APAR PJ26206 applied, a CTL-571 system error occurs. |
| PJ28001 | 15 | With MATIP 2 (PJ26693), it may not be possible to delete a hostname if there are DNS problems and there may be problems with hostnames that begin with the same letter. |
| PJ28002 | 15 | With APAR PJ26793 applied, an incorrect secondary return code is returned for a nonblocking server socket when the TPF C Debugger for VisualAge Client is running. |
| PJ28011 | 16 | With APAR PJ22600 applied, the ordinal number is missing in ACPD error messages. |
| PJ28014 | 15 | Add new CP user exit in get pool file address support. |
| PJ28016 | 16 | DLL Linkedit jobs should not be punched if LINKALL=N in GENSIP and LINK=YES in SPPGML |
| PJ28017 | 16 | With PJ27351 applied, a CTL-I9320 dump may occur when an MQSeries channel is stopped. |
| PJ28019 | 15 | With PJ27214 applied, ECBs which issue select() that specify only socket descriptors will do an unnecessary I/O operation. |
| PJ28020 | 16 | If a processor runs low on resources while holding the E-type loader master record (EMR), other processors may be locked out while attempting to hold the EMR. |
| PJ28021 | 15 | Select portability enhancement SPE. Allows for easier porting of applications that use the BSD select() function. |
| PJ28024 | 15 | When RVTSCAN (CCSNA4) processes an SNA shutdown command, a CTL-1 may occur. |
| PJ28026 | 15 | Internet Daemon (INETD) Listen Backlog Support. |
| PJ28029 | 15 | An operator interface to resolve host names or addresses. |
| PJ28030 | 15 | With PJ27446 applied, a catastrophic CTL-C117 dump may occur when attempting to force deactivate another processor in the loosely-coupled complex. |
| PJ28032 | 15 | While merging files using the TPF merge tool, if there is a difference or a conflict occurring at the beginning of input file 2, the TPF merge tool cannot detect all differences or conflicts between the files. |
| PJ28034 | 15 | IP packet network prioritization support |
| PJ28038 | 15 | With APAR PJ26570 applied, a CTL-3 may occur when a search-only LOCATE is received from a remote LU0 Primary Logical Unit (PLU). |
| PJ28040 | 16 | ERROR DURING RECOUP IRSCT BUILD DUE TO SSU UNIQUE RECORD ERROR CONDITION. |
| PJ28041 | 15 | After installing JSUI 9.1.1, attempting to use the C debugger results in a pop up window displaying the following message "CEEMGET() No msg text for: EQA 2331" and the C debugger halts execution. |
| PJ28043 | 15 | APAR PJ26746 added the CE1DFD label to the EB0EB macro, but did not add the label to the ECBEQ macro. This field should have the same label to avoid confusion as to the availability of this field. |
| PJ28044 | 16 | Structured programming macros (SPMs) may resolve to an unconditional branch without warning when you code a zero in an #IF instruction. In addition, some SPM macros do not support all five equates to handle register zero. |
| PJ28050 | 16 | CDRM may still show active after underlying CTC link is inactivated. |
| PJ28055 | 15 | If SIGACTION is used, the handler will get the structure with PSID. A signal handler installed by SIGACTION may be passed incorrect information about the sender of the signal. |
| PJ28057 | 16 | If a continuous long busy condition occurs, resource depletion may occur, resulting in a system outage. |
| PJ28058 | 15 | With APAR PJ27969 applied, the PCID table can become full, causing all session requests to be rejected with a sense code of 0812. |
| PJ28059 | 15 | Allow selective actions to be applied to CL22 dumps to prevent looping dumps during restart. |
| PJ28062 | 15 | If there is a blank line at the beginning of any one of the input files to the TPF merge tool, the merge will result in a ArrayOutOfBoundsException and TPF merge tool doesn't detect any differences and conflicts. |
| PJ28064 | 15 | Open Systems Adapter (OSA) Polling Enhancement. |
| PJ28065 | 15 | A MATIP enhancement to continue loading MATIP definitions to core after an error occurs. |
| PJ28066 | 15 | Enhancement to TPF MQSeries queue checkpoint performance using DECB support. |
| PJ28067 | 15 | Open Systems Adapter (OSA)-Express gateway selection enhancement. |
| PJ28069 | 15 | On IPL from a Loader General File (LGF), CYGR will cause a CTL-3, leaving the TPF system in Restart. |
| PJ28070 | 16 | An OPR-4B6 dump can occur when processing three PIUs received at the same time (on a single channel program) for the same RID. |
| PJ28072 | 15 | Structured programming macros (SPMs) #POPAAC#, #PUSHAAC and #PUSHINS require updates for the new DBEMPTY parameter for SPM conditional expressions in TPFDF programs. |
| PJ28087 | 15 | Greater than 32K socket send support for TCP/IP native stack support. |
| PJ28088 | 16 | A system hang may occur instead of a CTL-571 system error. This problem was introduced by APAR PJ27199 |
| PJ28089 | 15 | Due to PJ26600, a bad branch may occur during system error processing if an internal program check occurs in the CCDBLO routine in copy member CPSE. |
| PJ28090 | 16 | MPIF may cause a CTL-1 retrying MPIF I/O following a lost interrupt. |
| PJ28092 | 15 | An OPR-I041122 dump occurs on BCC2 with descriptor BKDA. BWRT has a logic problem to count the TPFCS records. |
| PJ28093 | 15 | Domain Name System (DNS) server wildcard support. |
| PJ28094 | 16 | SUBSYSTEM STATUS TABLE CORRUPTION: OPR-1F1 DUMP. |
| PJ28097 | 15 | Provide support for an 8-byte file address (FARF6). |
| PJ28104 | 15 | After applying APAR PJ27023, when a new local queue is defined, the Slow Queue Sweeper may incorrectly move messages from memory into a TPFCS BLOB even though the queue depth is not large enough to warrant the queue being swept. |
| PJ28105 | 15 | The evnqc C language API may return an incorrect return code value to the application when an ECB is not running in the EVM. |
| PJ28106 | 16 | ICKDSF jobs generated by SIP must specify NOINDEX option explicitly |
| PJ28108 | 15 | CL80 was incorrectly marked as object shippable by APAR PJ26366. Also, C header c$feat.h was incorrectly placed in the CHDR library instead of the SYMACRO library by APAR PJ27530. |
| PJ28114 | 15 | When the user edits a variable in the Local Variable Monitor, the displayed value will be correct. If the user edits another variable, the value displayed will be the original value. The value is updated in memory. |
| PJ28116 | 15 | If an all-file copy takes an I/O error writing the VSN with APAR PJ26686 applied, copy will timeout. |
| PJ28117 | 15 | After applying APAR PJ26707, a CTL-6C9 system error may occur during COPY EOJ lock movement because of a CTL-10 system error in CLML. |
| PJ28118 | 15 | Shared SSL session support. |
| PJ28119 | 15 | A CTL-4 may occur in BRTS and BRTT because of APAR PJ27848. Recoup phase 5 restart may not run. Recoup descriptor BKDU is not correct. |
| PJ28121 | 15 | A CTL-3 may result on the internal call error path in CYH4. |
| PJ28125 | 16 | Core corruption due to incorrect error recovery during tape switch. |
| PJ28126 | 15 | With PJ27023, TPF MQSeries recoup index entries for the TPFCS QDEF collection may be missing. This can cause database corruption if TPF recoup is executed and pools are erro neously returned. |
| PJ28128 | 15 | Set the ARCH() C/C++ compiler option to ARCH(0) in MASM |
| PJ28129 | 17 | TPF segment updates required for the co-requisite TPFDF data event control block (DECB) APAR PQ51955. |
| PJ28131 | 16 | A CTL-1 dump may occur out of cccief.asm after a CTL-E07 dump is issued. |
| PJ28132 | 17 | The ZNETW INACT command for an NCP hangs when another channel program is in progress for that NCP. |
| PJ28133 | 15 | Turbo MQ time initiated routines are activated too frequently with PJ27446 applied. |
| PJ28134 | 15 | Entering a sub-system specific Z-functional message from an EOCF/2 console window other than the Prime CRAS console may be rejected with a CVAD0008E error message. |
| PJ28135 | 16 | The SYSRCE member LOADDECK in the stage2 output is incorrect as a result of APAR PJ27328. The LOADER LOAD CTKX card is missing, the ONE TIME CALL segments are not generated, and the OPL load cards are incomplete. |
| PJ28136 | 15 | TPF MQSeries local queue manager support for trigger on every message as well as the get message option of MQGMO_WAIT. |
| PJ28138 | 18 | Users is given the option to allow SWISC CREATE to pass the most recent system activation number to the child ECB instead of assigning the activation number of the parent. |
| PJ28139 | 16 | Corrected the valid configuration table for short term pools and corrected selected error messages. |
| PJ28140 | 16 | Lost addresses may occur during Recoup of TPF Collection Support (TPFCS) collections, leading to data corruption. |
| PJ28143 | 15 | This APAR corrects problems with TCP/IP on Program Update Tape 15. |
| PJ28144 | 16 | PROBLEM WITH PJ27000 |
| PJ28145 | 15 | With APAR PJ27023 applied, a CTL-3 in CMQF during TPF restart can occur when the number of #IMQCK MQSeries checkpoint records is altered below 4000. In addition, an infinite loop can occur, causing TPF restart to hang when the number of checkpoint records is altered such that the number of available records is reduced. |
| PJ28147 | 16 | Assembly errors on the EVNTC macro on an HLASM V 1.2 after applying PJ27387. |
| PJ28148 | 16 | BOF3 Assumes IPART to be in Directory Ordinal Order |
| PJ28149 | 16 | CSCQ can take CTL-6DF dump (no available IOBs) if NCB records are in VFA. |
| PJ28150 | 16 | CTL-F9 will occur on a system with multiple subsystems when SYSTC SBDLOCK is off. |
| PJ28152 | 15 | Warning for HOWMANY in sysgtime.h |
| PJ28153 | 16 | It is possible to receive CTL-038 dumps during processor deactivation. |
| PJ28154 | 19 | The version code obtained by the STIDP instruction is not meaningful for newer processors. |
| PJ28155 | 16 | A ZBROW DISP COL ALL command, issued on a data store without any inventory, results in a nondescript error message. |
| PJ28159 | 16 | Due to PJ25094, a data mismatch can occur between the prime and duplicate modules. |
| PJ28161 | 16 | When APAR PJ26683 is applied, a timing problem in AOA processing can cause a CTL-003. |
| PJ28162 | 16 | The ICFLDT, ICFTBL, and ICFLSCT selective memory dump table (SMDT) entries appear to overlap. |
| PJ28163 | 15 | Erroneous deadlock condition may occur in a loosely couple system. |
| PJ28167 | 16 | Bypass tape dumps when drives that are part of a tape library are either #CP DETACH or ZTVAR DELETE. |
| PJ28168 | 16 | Create a TPF operator command to display SNMP MIB information. |
| PJ28169 | 16 | With APAR PJ27023 applied, TPF MQSeries may cause a CTL-C catastrophic dump because of a "deadly embrace" while running TPF data collection. |
| PJ28170 | 15 | With PJ28136, an uninitialized field in the queue definition causes a "025: TO2_atRBAwithBuffer failed." message to appear on the TPF console during TPF restart. |
| PJ28171 | 16 | A Snap EB dump occurs when calling syslog() APIs via programs defined as non-restrict. |
| PJ28172 | 17 | The C debugger displays a lowercase p instead of q in the string. |
| PJ28176 | 16 | This APAR expands the ability to read (parse) Extensible Markup Language (XML) data on the TPF 4.1 system. |
| PJ28177 | 16 | Irrelevant sense data is displayed following a channel error. |
| PJ28178 | 16 | The tmslc function is incompatible with the C++ compiler. |
| PJ28180 | 16 | Due to APAR PJ25089, 4DP Pools used by POSIX files are not being returned to the system until inode is reused. |
| PJ28184 | 16 | The TPF IP trace function can display the TCP window size as a negative number. |
| PJ28191 | 17 | With APAR PJ27693 applied, problems can occur with the output message transmitter (OMT) for secondary logical unit (SLU) thread applications, including forcing all messages to the OMT and stalling the OMT queue. |
| PJ28192 | 16 | With PJ26146 applied, fixed record types unique to an I-stream greater than 9 are not displayed correctly in the FACE Table Generator report. |
| PJ28193 | 16 | Listener sockets are being closed when receiving a SOCACCES errno on the accept API. |
| PJ28195 | 16 | TCP/IP Network Services Database support |
| PJ28197 | 16 | Inactivation of many sockets using AOA/AOR may cause CTL-00C. |
| PJ28198 | 18 | Messages queued up on the OMT and NCP queues could not be purged, even after deactivating and clearing the NCB. |
| PJ28202 | 16 | Due to PJ17852, msgs ALDR0901E, ALDR0902E, ALDR0903E, ALDR0904E, ALDR0905E missing newline |
| PJ28203 | 16 | GARBAGE IS WRITTEN TO SYSLOG DEFAULT LOG |
| PJ28205 | 16 | RCS State Change processing timer routine CJIVBTMR needs to use SSST/MFST control block locking. |
| PJ28206 | 16 | A CTL-3 system error may occur during DBCLS REUSE processing when using a commit scope and TPFDF Transaction Manager services, introduced by TPF APAR PJ26746. A TPFDF APAR (PQ51339) and a TPF APAR are required for associated changes. |
| PJ28209 | 16 | With APAR PJ26161 applied, MATIP does not correctly process multiblock chained output messages. |
| PJ28210 | 17 | After applying APAR PJ24563, miscellaneous system errors are encountered when channel errors are received for a 3590 device. |
| PJ28213 | 16 | TCP/IP Packet Filtering Firewall support. |
| PJ28218 | 16 | ECB heap storage is depleted when gethostbyname() or gethostbyaddr() is called too many times by the same ECB. |
| PJ28219 | 16 | A CTL-6D9 may occur if a unit exception occurs on a tape that is being switched. |
| PJ28221 | 16 | With APAR PJ27351 applied, TPF MQSeries messages may get out of order if the MQSeries sweeper is invoked. |
| PJ28224 | 16 | An incorrect compare and swap instruction was placed in the TPF Internet Mail Server Data Collection macro. |
| PJ28226 | 16 | Collection released chains are not always recouped, possibly resulting in database corruption. Also, CTL-749 errors may occur when corrupt collections are encountered by recoup, file systems, or any other TPF function that uses collection support. |
| PJ28228 | 16 | After applying PJ27925, a CTL-I00003 may be received out of CMQX during recovery log processing for MQSeries in system restart or processor deactivation. |
| PJ28229 | 16 | The source code for ZDTCP PING and TRACERTE programs CLTQ and CLTT and for TCP/IP header files icmp.h and udp.h is currently not shipped. |
| PJ28230 | 16 | FICON CTC Support SPE |
| PJ28233 | 16 | A CTL-4 dump or a tight loop in the system can occur when the TCP/IP native stack socket sweeper is running. |
| PJ28234 | 16 | From the expression monitor window in the C debugger, dereferncing a structure pointer that is a member of another structure fails; A pop-up box is displayed stating "Error occurred: Expression validation failed" |
| PJ28235 | 16 | Fixes multiple types of dumps when trying to use the Performance Analyzer on C code without hooks or assembler code. |
| PJ28237 | 16 | TCP/IP native stack IP message table corruption can cause a CTL-1 system error. |
| PJ28240 | 17 | Duplicate tape generations result from concurrent tape switch requests. Also, even with PJ28057 applied, TPF may fail to wait 1 second before retrying a tape operation that encountered a long busy condition. |
| PJ28241 | 16 | Due to PJ24472 an infinite loop may occur in ISO-C application cleanup (cxxfun) after a CTL-E2 occurs. |
| PJ28245 | 16 | Issuing the ZDCOR command with the INST parameter specified may be misleading. |
| PJ28251 | 16 | OPR-I0DECB0 WHEN RUNNING RECOUP OR DOING A PDU_ |
| PJ28254 | 16 | With TCP/IP native stack (APAR PJ26683), receiving a retransmitted SYN message can causes the acknowledgement to be sent with the wrong sequence number. |
| PJ28255 | 16 | CPA0 MEMBER PROFFUNC.CPP OVERWRITES EBROUT. |
| PJ28256 | 16 | With PJ27023, OPR-C117 may occur due to hanging MQSeries checkpoint process. |
| PJ28257 | 16 | Reserved customer field MIOUSER in DCTMIO was used as a work area by PJ25094. |
| PJ28261 | 16 | Allow recovery log to be initialized on FINDC error. |
| PJ28262 | 16 | Periodic rise in used frames when TPF is connected to a 3494 tape library device. |
| PJ28263 | 16 | With TPF DECB support (PJ27393) installed, the find_record_ext API with a DECB specified does not return a NULL pointer to the caller when an error occurs. |
| PJ28265 | 16 | An OPR-4F1 can occur when a BID is sent immediately after receiving a request. |
| PJ28266 | 16 | With APAR PJ21791 applied, a read() or recv() returns with a -1 return code after a successful connect() call on a multi I-stream system. |
| PJ28267 | 17 | Various MATIP Security Enhancements to APAR PJ26161. |
| PJ28268 | 16 | MPIF paths may not connect following PJ27391 when using 3088 MCCU devices. |
| PJ28285 | 16 | If an I/O error occurs during DASD module mount in a loosely coupled system, lock activity remains suspended on the affected DASD pair, causing locking I/O to back up. |
| PJ28286 | 16 | FACE file type update required in segment SYSEQ for IRCDDF. Segment UFHN needs to be added to segment SPPGML. |
| PJ28287 | 16 | FIX LOST ADDRESSES PROVOKED BY BCC2 |
| PJ28288 | 17 | For SNA PU5 (subarea) NCP links, VR blocked condition can occur with PUT 14 APARs PJ27477 applied. Outbound PIUs and packets can be lost for SNA PU2.1 (LEN and APPN) links and IP CDLC links. |
| PJ28289 | 16 | Enhancement to enable the KEEPALIVE option of TCP/IP native stack sockets used by MQSeries receiver channels. |
| PJ28294 | 16 | Due to PJ25880, an OPR-C202 error may occur out of CUPH every 15 minutes if the TPF system is running in file system migration mode. |
| PJ28295 | 16 | CLEAN UP C/C++ HEADER FILES |
| PJ28296 | 16 | With APAR PJ26578 applied it is possible for an erroneous MNOTE 100 to be issued when a SIP Stage I deck is assembled. |
| PJ28297 | 16 | RESTARTING IN PHASE 2 RESULTS IN DOUBLE ID COUNTS. |
| PJ28303 | 16 | Enhancement to post all pending socket APIs to prevent sockets from hanging when remote delays the close() sequence. |
| PJ28304 | 16 | BBEWP RECOUP CODE REPORTING ERRORS INCORRECTLY. |
| PJ28306 | 16 | With PJ25094 applied, ECBs that issue the LODIC macro while running in a commit scope may be suspended or returned to the application erroneously. |
| PJ28308 | 16 | The ZECBL E command does not handle 4 byte ECBs correctly |
| PJ28311 | 16 | ZRBKD entries are not allowed from an EOCF multiple support console. |
| PJ28312 | 16 | SNA Path Information Unit (PIU) trace corrupts core when processing a Format Identification 4 (FID4) virtual route (VR) pacing response. |
| PJ28314 | 16 | BSSC. INCORRECT ID TABLE COUNTS FOR LAST SSU AND BSS. |
| PJ28315 | 16 | A looping condition may occur in CPAA when trying to mount an offline device. |
| PJ28319 | 16 | Correct problems in BAM1. |
| PJ28320 | 16 | When performing a chain-chase through globals, a CTL-3 may occur in segment BRPT. |
| PJ28321 | 16 | ZNKEY command not processed when Native Stack (PJ26683) or OSA-Express is defined in the system without SNA and CLAW support enabled. |
| PJ28323 | 17 | WTOPC's have ENDOFM=NO incorrectly coded, causing hung terminal conditions. |
| PJ28324 | 16 | Send RIP messages only in CRAS state or above. |
| PJ28327 | 16 | With PJ27596 applied, a CTL-001 system error may occur in the channel-to-channel (CTC) interrupt handler after a CTC link is deactivated. |
| PJ28332 | 18 | LU 3600 messages sent using the ROUTC macro may be sent out of order. |
| PJ28333 | 17 | With PJ25780 applied, the MQSeries QDEPTH warning message may not be generated if the QDT is set to zero and then reset to a non-zero value. |
| PJ28334 | 17 | Certain tape I/O errors during dump processing can cause tape I/O to loop and not time out possibly hanging the system. |
| PJ28335 | 16 | TPF MQSeries console messages may result in OPR-346 dumps. |
| PJ28339 | 16 | Enhancement to TPF MQSeries local queue manager support to provide administrators with a clear queue function and also enhancements to the existing displays for channels and queues. |
| PJ28340 | 16 | A CTL-4 system error may occur out of CHDL when an LU 6.2 SEND_DATA verb is issued with an output message in AM0SG format that contains an incorrect AM0CCT value. |
| PJ28344 | 16 | TCP/IP Fast Retransmit support. |
| PJ28346 | 17 | GET UNAUTHORIZED USE OF MACRO WHEN STARTING DEBUGGER. |
| PJ28348 | 16 | With TCP/IP native stack (APAR PJ26683), a TCP RST, without a corresponding socket block, will be built with an incorrect acknowledgement number. |
| PJ28352 | 16 | ERROR IN DIAG X'08' SETUP IN PJ27446. |
| PJ28353 | 16 | TPFAR erroneously returns a parser error (PRSE0011E) when processing ZSQLD ADD with the PORT parameter (added by APAR PJ27953) specified. |
| PJ28354 | 17 | After applying PJ16206, conditions may exist where ZFCAP results in a CTL-4 from realtime segment BXBB. |
| PJ28358 | 16 | ESS devices taken offline due to SIMs exceeding SONS error limit. |
| PJ28360 | 16 | With TCP/IP native stack support (APAR PJ26683), a timing problem can occur if an ECB issues an activate_on_receipt (AOR) API for a socket that already has a read API pending. |
| PJ28361 | 17 | When a X'0831' sense code is received by the TPF system, an UNBIND is not sent out in some cases causing the session to hang. |
| PJ28363 | 16 | System Heap Enhancements. |
| PJ28364 | 16 | The hop count on RIP messages needs to change from two to three to account for different customer configurations. |
| PJ28367 | 16 | INCORRECT RETURN CODE FROM CFS181'S __WAIT_ON FUNCTION |
| PJ28369 | 16 | Diffie-Hellman support and IBMPAL for SSL not configured correctly. |
| PJ28370 | 17 | After applying APAR PJ27785, CRAS data in CTKC is not converted correctly to 32-Way format and CTKC is not generated correctly by SIP. |
| PJ28371 | 16 | A CTL-10 may occur while processing FON records during phase I of recoup. |
| PJ28372 | 16 | PJ28372 seals a memory leak located in cicont.c used by ICONV. |
| PJ28375 | 17 | Software errors occurred when processing s8 records in BKDB. |
| PJ28376 | 17 | Add SSU checks for Recoup selective error processing. |
| PJ28380 | 17 | CTL-4 OCCURS DURING ZRPDU DISPLAY. |
| PJ28383 | 17 | Error BOF70012E provides no diagnostic information. |
| PJ28386 | 16 | Enhance the ZBROW command for TPF Collection Support collections. |
| PJ28388 | 16 | ZBUFC ALLOC IMPLEMNT CAUSES TWO MPLF CONNECT DEVICES |
| PJ28389 | 16 | With PJ27830 applied, OPR-I0200C8 may result from ZMQSC ALT CHL command. |
| PJ28390 | 16 | CTL-33 out of CL24 and system hang condition. |
| PJ28391 | 17 | CTL-002 out of IP CDLC activation code in CTX2 when PJ27932 is applied. |
| PJ28393 | 17 | CFISVC returns the wrong SVC table entry address when the SVC2L parameter is not a good index. |
| PJ28394 | 17 | Locking errors can occur on a cached unlock retry. If the retry is unsuccessful, the rest of the chained CCW will not be issued potentially causing additional locking errors. |
| PJ28395 | 16 | Provide the ability for TPFDF to use the TPF Assembler Debugger for VisualAge Client and the TPF C Debugger for VisualAge Client. |
| PJ28396 | 16 | TPF Internet Mail server path length, I/O, and ECB startup overhead reduction. |
| PJ28397 | 17 | CTL-777 and CTL-6D9 dumps may occur when multiple unit checks are received on a 3590 device during attention processing. |
| PJ28399 | 16 | LINKING DLL/DLM/LLM WITH MORE THAN 1 FILE INCLUDING c$pnl.h WILL GET DUPLICATE SYMBOL IDSPNL. |
| PJ28400 | 16 | KILL FUNCTION WILL NOT WAKE PAUSED PROCESS. |
| PJ28406 | 17 | LIBI AND STUB uses hard coded time stamp in the END card when creating stubs. |
| PJ28411 | 16 | TPFTAPE.H CONTAINS A CIRCULAR HEADER REFERENCE |
| PJ28412 | 17 | Allow MATIP and MQ Series local queue manager support to utilize IP Routing Table support (PJ26890). |
| PJ28414 | 17 | Read Count CCW string conversion incorrect for ESS. |
| PJ28415 | 17 | Sessions that support session-outage notification (SON) and that are in the beginning stages of session activation do not get cleaned up when a DACTCDRM request is received. |
| PJ28416 | 17 | Lost MPLF attention message at Copy End of Job |
| PJ28417 | 16 | NOT COUNTING PRIME PNR'S |
| PJ28418 | 17 | With APAR PJ26719 applied, program CLZK hangs after a ZCLAW ACTIVATE command is entered and a SNAP-910A occurs. |
| PJ28421 | 17 | CVG5 DOES NOT SUPPORT VARIABLE-LENGTH DATA RECORDS. |
| PJ28422 | 17 | With OSA-Express support applied (PJ27333), a CTL-1 can occur when the SNAKEY macro parameter MAXIPCCW is set to zero. |
| PJ28423 | 17 | TPF MQSeries channels are not automatically started after an IPL. |
| PJ28424 | 17 | ZDMAP OUTPUT CORRUPTION. The last information printed in the ZDMAP output gets overlaid with underscores if the function names are too large. |
| PJ28429 | 17 | LINK MAX CONSTANT IS INCORRECTLY SET TO 256, CONFLICT. |
| PJ28431 | 16 | Update DRVA so that the NOMARGINS compiler option can be used for SIP-compiled C++ programs. |
| PJ28432 | 17 | TPF Application Requester (TPFAR) may receive a CTL-7E7 system error because of a bad TCP connection used from the hotcon table. |
| PJ28433 | 17 | Issue a CTL-588 dump if PAUSC is not responded to by the application I-stream in reasonable amount of time. |
| PJ28435 | 16 | TPF MQSeries support for MQServer, Database Rebuild, and enhanced user exits. |
| PJ28438 | 17 | PROBLEM WITH CTL-10 TIMEOUT LIST IN CTME |
| PJ28441 | 17 | NEED INFORMATIONAL DUMP IN PURGE LOCK CODE. |
| PJ28442 | 17 | IPART not built before reaching 1052 state. |
| PJ28443 | 17 | With APAR PJ27023 applied, the TPF MQSeries sweeper can create a deadly embrace condition where one ECB waits on a CORHC queue lock while a second sweeper ECB waits on an FINHC (macro) for the queue definition record. |
| PJ28448 | 17 | This APAR adds enhancements to improve performance of the CLAW code. |
| PJ28449 | 17 | PJ26432 CAUSES CC-2 ON RETRY OF CONSOLE WRITE |
| PJ28451 | 17 | Following APARs PJ24412 and PJ25294, processor deactivation may not be completed properly. |
| PJ28452 | 17 | The ZMQSC MIGRATE COMMIT command may result in a CTL-C error, and other ZMQSC commands as well as other TO2 applications may fail with a 'CURSOR NOT VALID' error because of incorrect return settings from TO2_CursorPlus for extended keyed collections. |
| PJ28453 | 17 | Correct check of Error Log for ZRECP SEL by File Address. |
| PJ28454 | 17 | Streaming DYDN0002E messages during pool directory update verify. |
| PJ28455 | 17 | Incorrect display of the SSPS field can occur when SMPx/ZCTKA DISPLAY is issued. |
| PJ28456 | 16 | The TPF Collection Support functions TO2_removeIndex and TO2_removeValue do not properly set a return code. When checking the return code, applications may erroneously detect an error return. |
| PJ28459 | 17 | Header file c$cy3d.h does not match the equivalent macro file CY3DR.mac |
| PJ28460 | 17 | A CTL-3 can occur in CTSC when an IPMT block is inadvertently queued to a socket without any data. |
| PJ28461 | 17 | MQSeries TPFCS errors require ZOODB SET TO2 TEXTDUMP-ON to get a dump. |
| PJ28462 | 17 | DOCUMENTATION FOR SYSTEM ERROR 0000D9 IS MISLEADING. |
| PJ28463 | 17 | SYSTEM HANG DURING RECOVERY LOG RESTART/RECOVERY |
| PJ28464 | 17 | With APAR PJ27023 applied, a CTL-C dump may occur during TPF system restart when processing MQSeries batch-related log records for transmission queues, a CTL-4 from CMQX may occur when locating the message ID in a sweep recovery log record, and the system may hang when in input list shutdown and only MQSeries ECBs are active. |
| PJ28465 | 17 | ZVIPA DISPLAY doesn't correctly display if an IP address is active or inactive if its primary OSA-Express connection is not active. |
| PJ28466 | 16 | After applying PJ27023, deleting a item which is managed by MQ using a hash table can result in a CTL-004 system error. This includes channels, queues, processes and trace entries. |
| PJ28467 | 16 | A CTL-4 system dump may occur in CL20 of CCTLOG when processing a WLOGC wait queue. |
| PJ28469 | 17 | NOT CLEARING OF BL0SUA ON RECOUP START. |
| PJ28470 | 17 | TPF incorrectly sends a RST if a SYN message is received without the MSS option. |
| PJ28471 | 17 | With PJ27023 applied, application data stored in EBW001-EBW003 may be corrupted by MQSeries tx_rollback processing. |
| PJ28475 | 16 | With APAR PJ28195 applied, entering a ZSTAT command in restart will cause a CTL-4. |
| PJ28479 | 17 | With OSA-Express polling enhancement applied (APAR PJ28064), locking problems can occur in TPF's Event Facility. |
| PJ28480 | 17 | CRETC's created with the STATE=1052 option may be lost when cycling down a non-BSS subsystem |
| PJ28481 | 17 | With APAR PJ26686 applied, multiple copy aborts are allowed for the same copy, which could cause an incorrect module to be taken offline. |
| PJ28482 | 17 | CTL-C during a tape DDR(LIFO), because the system ran out of SWBs |
| PJ28483 | 17 | OSA-Express read buffer usage display support |
| PJ28488 | 17 | Due to PJ28097, condition code was not set before a branch instruction in IB05 of IPLB. |
| PJ28490 | 17 | Move locks from MPLF to CF may leave locks in the FROM control unit, which may result in a CTL-704 dump. |
| PJ28491 | 17 | The C language mapping of a WGTA entry does not include all of the same bit settings that are contained in the equivalent assembler language macro. |
| PJ28493 | 17 | TCP Connection Limiting Support |
| PJ28494 | 17 | With APAR PJ25375 applied, local port numbers greater than 32767 are not displayed by the ZDTCP NETSTAT command for servers created by the TCP/IP offload code. |
| PJ28495 | 17 | A program error in ccccpse may occur when the contents of the detached block table are corrupted. |
| PJ28496 | 17 | Add support for the activate_on_accept(AOA) model on INETD. |
| PJ28498 | 17 | PROBLEM WITH PROGRAM KEY ON CROSC ENTRC.APAR PJ18628 changed the call to MONTC with a call $MONTC. The result was that the CROSC ENTRC target program may receive control with key 0, although caller was in key 1. |
| PJ28499 | 17 | A deadlock condition can occur when multiple ZDVSN commands are issued for the same device. |
| PJ28501 | 17 | Any program that attempts to include header file c$bk0rp.h twice may not compile properly. |
| PJ28502 | 24 | With PJ32081 applied, applications with Activate on Receipt
(AOR) pending may not be properly activated when a TCP RST is
received.
|
| PJ28503 | 16 | CAPT NEEDS TO BE UPDATED TO SPECIFY PUT16 AS PUT LEVEL, SPPGML NEEDS CYIELD RESTORED |
| PJ28504 | 17 | IP routing table entries can be deleted during a system IPL. |
| PJ28506 | 17 | With PJ28136 applied, MQSeries trigger first segment CUIR may not get triggered when the process name of the queue is empty. |
| PJ28507 | 17 | Master processor id in copy keypoint corrupted when ZMCPY RESTART issued from another processor. |
| PJ28508 | 17 | With PJ26686 applied, the prime module could accidentally be taken offline if multiple copy aborts are running. |
| PJ28509 | 17 | ZMCPY RESTART aborts after establishing a new master processor. |
| PJ28511 | 16 | After applying PJ28386, unresolved references are generated when attempting to linkedit CJ10. |
| PJ28519 | 17 | The source line extends past column 72 in the source file. |
| PJ28520 | 17 | A CTL-4 occurs when a DLL is loaded after DLL cleanup. |
| PJ28521 | 17 | TPF syslog daemon does not reread the configuration file when the SIGHUP signal is received. |
| PJ28526 | 17 | Disable socket creation support. |
| PJ28531 | 17 | With PJ25780, CTL-F9 results when connections are made to the listener with no MQSeries profile defined. |
| PJ28532 | 16 | JCI2.C compile fails with a syntax error. |
| PJ28534 | 17 | After applying APAR PJ15728, when the capture of one module requires more than one tape, capture may not be completed correctly in a loosely coupled environment. |
| PJ28536 | 17 | With APAR PJ27422 applied, problems occur when loading programs with ADATA. |
| PJ28537 | 17 | ZMCPY does not abort properly when errors are taken during EOJ processing. |
| PJ28538 | 17 | CATASTROPHIC CTL-EA DURING CYCLING TO 1052 STATE. |
| PJ28539 | 17 | With APAR PJ27023 applied, MQGET inside a commit scope may retrieve messages from the wrong common queue. |
| PJ28540 | 17 | Output messages sent from the scrolling program may contain more than the defined maximum number of display lines. |
| PJ28542 | 17 | Exit code in BKD0 causes CTL-4 system errors in BCC2. |
| PJ28543 | 17 | Due to long I/O retry interval, IPL DASD roll call time is longer than necessary if I/O error occurs. |
| PJ28549 | 17 | Incorrect reporting of large cache sizes in 3990 Storage Control reports. |
| PJ28550 | 17 | CTL-4 in deadlock detection program CL40. This error was introduced by APAR PJ25094. |
| PJ28551 | 17 | Insufficient number of digits allowed for entry of directory. |
| PJ28552 | 17 | An intermittent problem exists with the ZRECP ABORT command. |
| PJ28553 | 17 | With PJ17568 applied, various system errors may occur, including CTL-4, CTL-6DA, CTL-4A0, and OPR-C62048, when an ECB allocates at least one LU 6.2 shared conversation. |
| PJ28555 | 17 | ZMCPY ALL of prime IPL mod while up on dup causes IPLB0058E on next IPL. |
| PJ28557 | 19 | Multiple segments have code that extends beyond column 72. |
| PJ28559 | 17 | A CTL-6ED or CTL-1 system error can occur after a ZFILE command or a FORKC macro with APAR PJ27277 is applied. |
| PJ28560 | 17 | After APAR PJ25761 is applied, a CTL-3 occurs when issuing ZINET STOP with a wildcard character in the input server name at 1052 state. |
| PJ28563 | 17 | Hashing collision in SSST entries can cause corruption. |
| PJ28564 | 17 | After applying APAR PJ28386, incorrect messages may be displayed when ZBROW commands are issued. |
| PJ28565 | 17 | When servicing a GETFC with BLOCK=YES and COMMON=YES, control is not always returned with the block address in R14 and block type in R15, which may cause a CTL-3 in the calling program. |
| PJ28568 | 17 | Support setsockopt() SO_SNDTIMEO option for TCP/IP offload support to enable send(), sendto(), and write() functions to time out. |
| PJ28570 | 17 | With APAR PJ26895 applied, there can be false ready and other potential problems with the select() API. |
| PJ28571 | 17 | A CTL-C Catastrophic system error (out of frames) may occur with online recoup and pools maintenance APAR PJ27469 applied. |
| PJ28573 | 17 | High cache miss rates experienced. with the filesystem's directory cache. |
| PJ28575 | 17 | RLCHA in cycle down state renders RLCHA queue lost. |
| PJ28578 | 17 | OSA-Express Gateway Failure Detection Enhancement |
| PJ28579 | 17 | VATPF DEBUGGER DISPLAYS 1-DIMENS. ARRAY AS 2 OR 3-DIM. |
| PJ28583 | 17 | When the TYPE parameter of the CFCONC macro is coded incorrectly, assembler error ASMA163W is received instead of an MNOTE. |
| PJ28584 | 17 | Add a new option to automatically swing virtual Internet Protocol addresses (VIPAs) when all default gateways defined to an OSA-Express connection fail. |
| PJ28585 | 17 | LOGGING RESTORE TAKES A CTL-3. |
| PJ28586 | 17 | Default Domain Name and delete DNS support. |
| PJ28587 | 17 | Enhanced Denial of Service Detection and Prevention. |
| PJ28588 | 17 | 3215 CONSOLE SUPPORT WITH NETWORK CRT/PRT PAIR FALLBACK. |
| PJ28590 | 17 | ZRECP SEL may not work correctly with TPFDF installed |
| PJ28591 | 17 | Movable VIPA with Force Enhancement |
| PJ28593 | 17 | SYSTEM PROCESSES FUNCTIONAL INPUT ENTRIES > MAX SIZ DEFINED |
| PJ28595 | 17 | After applying PJ27477 CTL-5A dump on a 3590 device. |
| PJ28596 | 17 | After applying APAR PJ24563, ATTENTION PROCESSING FAILED message is received on a 3590 device after a cartridge is unloaded by an operator. |
| PJ28598 | 17 | With OSA-Express support (APAR PJ27333), RIP client processing for movable VIPA support sends RIP messages out with the wrong metric. |
| PJ28604 | 17 | Potential keypoint error in BCC5. |
| PJ28607 | 17 | With APAR PJ28339 applied, response messages to the console incorrectly overlap when performing ZMQSC DISPLAY command processing with the Q-ALL or CHL-ALL keyword. |
| PJ28608 | 17 | CTL-38 at multi-mod copy end-of-job due to cached unlock on delay queue. |
| PJ28609 | 17 | Paused I-streams consume cycles on VM and shared PR/SM. |
| PJ28612 | 17 | Due to PJ25094, a bad branch instruction in cvf340.cpy may cause records without a fast record sharing hash table (RSHT) lock not be hardened in a commit scope. |
| PJ28613 | 17 | Link-edits for TPF DLMs need temporary definition side-decks. |
| PJ28614 | 18 | When an additional tape volume is needed to capture a module and it is not available, capture may incorrectly start an additional module, exceeding the desired number of maximum modules in progress. |
| PJ28615 | 17 | PJ23269 neglected to disable DASD interrupts at CCDLCKD2 as is done at PRCHAPP2. This can result in a CTL-38 reporting a logic error due to undefined CC from SIOSC. |
| PJ28617 | 17 | After applying PJ26943, declarations for IBM reserved fields may not be compiled properly. |
| PJ28618 | 17 | Insure CTL-38 unlock failure messages are displayed correctly. |
| PJ28619 | 17 | A CTL-3 may occur when a core global chain chase times out with a FACE error. |
| PJ28620 | 17 | A TPF MQSeries receiver channel hangs when a dump occurs in the TPF MQSeries ROUTC bridge. |
| PJ28621 | 17 | After applying APAR PJ27530, loading and activating a loadset containing TPFDF fast-link segments using the E-type loader will not update the fast-link directory correctly. This causes the base versions of the fast-link segments to be called instead of the activated fast-link segments. In addition, after applying APAR PJ26707, the stub for CFL6 may not be generated correctly. |
| PJ28622 | 17 | Allow TPF to use the HMC as the system console. |
| PJ28623 | 17 | Implement Semaphore and Messaging Facilities for TPF. |
| PJ28625 | 17 | CONSOLE FALLBACK TO NETWORK CRT/PRT ALTERS PRT ANT INDEX. |
| PJ28626 | 17 | Recoup loses a common block. |
| PJ28627 | 17 | ITSSWG WRONG APPENDED MESSAGE IN FORMATTED DUMP FOR CT |
| PJ28628 | 17 | HUNG COMMIT SCOPE WHEN USING VFAF=IMMED. |
| PJ28631 | 17 | With PUT 15 applied, a CTL-572 system error can occur during TCP/IP native stack restart. |
| PJ28635 | 17 | Pointer members of C++/STL base classes cannot be de-referenced. |
| PJ28637 | 17 | Correct Multi-group chain chasing for nonunique and partially unique record types. |
| PJ28638 | 17 | Various system errors can occur when a hardware error occurs on the console. |
| PJ28639 | 17 | A CTL-3 may occur because BS0C may not function correctly when ID=X'0000'. |
| PJ28640 | 17 | With TCP/IP native stack support (APAR PJ26683), a timing problem can cause a CTL-3 system error from accept() socket API processing. |
| PJ28642 | 17 | ZSTIM setup and routing of messages is incomplete when native (3270) console support is used. |
| PJ28645 | 17 | Messages can be written erroneously. Introduced by APAR PJ28575. |
| PJ28647 | 17 | With APAR PJ25094 applied, the delayed file path ignores contention pending, resulting in a possible hung VFA sync lock. |
| PJ28648 | 17 | ZSTIM command entries issued for a subsystem will get activated on the basic subsystem (BSS) instead when TIME=1052S or TIME=1052E. |
| PJ28649 | 17 | This APAR merges the C/C++ and Assembler debuggers into one TPF debugger. |
| PJ28651 | 17 | ZSTAT display is truncated to show only 5 digits. |
| PJ28652 | 17 | Segment CFL2 has unprintable characters in a comment block. |
| PJ28653 | 17 | SELECT FAILS WHEN MULTIPLE NON NATIVE FD'S READY. |
| PJ28654 | 17 | The lodic_ext function is not compatible with the C++ compiler (NO OPERATOR TO ADD/SUBTRACT ENUMERATED TYPES). |
| PJ28656 | 17 | TPF Application Requester (TPFAR) feature may take a CTL-4 system error dump when using the ZSTTD command with the DET option following APAR PJ23931. |
| PJ28658 | 17 | APAR PJ27530 BASE REGISTER CORRUPTION IN CPSL. |
| PJ28659 | 17 | ZDTCP PING Packet Size & Count Support |
| PJ28660 | 17 | With APAR PJ26683 (TCP/IP native stack support) applied, a SYN request with no TCP options will be rejected incorrectly. |
| PJ28661 | 17 | Recoup is able to start when ZRPDU command processing is active. |
| PJ28663 | 17 | An enhancement to support remote platforms that generate zero-length TCP keepalive messages. |
| PJ28664 | 17 | Certain messages that are displayed only on the RO CRAS should also be routed to the prime CRAS (PRC). |
| PJ28667 | 18 | Customize throttling code in CLIB. |
| PJ28668 | 17 | The c$recoup header file is out of sync with the recoup macro. |
| PJ28672 | 17 | Pool directory keypoint may file the pool directories to the wrong record ordinal during recoup directory capture. |
| PJ28674 | 17 | CTL-4 WHEN PDU EXC TABLE IS FULL |
| PJ28675 | 17 | ZRECP AUTO-ABORT follows ZRECP SEL. |
| PJ28676 | 17 | CTL-572 system error dumps may occur after APAR PJ27619 is applied. |
| PJ28677 | 18 | With APAR PJ27028 applied, data is not written correctly to the FTP log. |
| PJ28679 | 17 | A CTL-3 dump or some other error may occur out of CHKR when an SCB chain error is detected (OPR-C62050 dump) during TPF system restart. |
| PJ28680 | 17 | Deactivating a processor while PDU is active causes FC33 and CA pool records to be lost. |
| PJ28681 | 17 | SNAP-575 BOFB, ZRECP PROTECT SEL. |
| PJ28682 | 17 | With APAR PJ27351 applied, swept persistent messages may be lost after restarting the queue manager. |
| PJ28683 | 17 | Additional checks needed to detect if module in copy. |
| PJ28685 | 17 | MPIF may take a CTL-3 during MPIF restart following a ZMPIF PDR INIT ALL added by APAR PJ27785. |
| PJ28688 | 17 | After applying APAR PJ28386, the ZBROW ALTER ELEMENT command, issued for a keyed log collection, will fail with error message BROW0153E, no search specified. |
| PJ28691 | 17 | With the OSA-Express polling enhancement (APAR PJ28064) applied, a CTL-572 system error can occur in the TPF I-stream scheduler. |
| PJ28693 | 17 | CE1FA0 corruption may occur when a SENDC or ROUTC macro is issued for a file-chained message in a multiple database function (MDBF) environment. |
| PJ28694 | 17 | TPF MQSeries sender channels may discard a message when the channel is reset and the batch size is set to 1. |
| PJ28695 | 17 | With PJ27023 applied, MQSeries checkpointing frequency for less than 5 seconds is prevented. |
| PJ28700 | 17 | NESTED OFL= MAY NOT GET CHAIN CHASED |
| PJ28701 | 17 | Starting all TPF MQSeries channels prevents channel displays. |
| PJ28702 | 17 | TPF may clear the 3270 PRC screen too quickly. |
| PJ28703 | 17 | A CTL-3 dump may occur in segment CYGN after a ZBUFC ALLOCATE IMPLEMNT interprocessor communications (IPC) trigger. |
| PJ28705 | 17 | A CTL-6DA dump may occur out of CPSI if an error is received while attempting to write SNAPC dump data to the RTA/RTL tape. |
| PJ28706 | 17 | APAR PJ27870 describes my problem with socket.h. |
| PJ28707 | 17 | GRFS module down routine is not working correctly. |
| PJ28709 | 17 | A CTL-4 or CTL-7 system error may occur in segment cpaa.asm after applying APAR PJ28499. |
| PJ28710 | 17 | GENSIP macro change to support headers used by IPTPRT. |
| PJ28712 | 18 | Failure of ESCON director card caused lost interrupts resulting in a system outage. |
| PJ28713 | 17 | With APAR PJ27023 applied, TPF MQSeries channels can hang the TPF system because of an infinite loop while processing an error return from a TCP/IP recv() function call. |
| PJ28714 | 17 | With APAR PJ26498 applied, TPF MQSeries sender channels may not autostart correctly, and message "MQSC0019I xx.xx.xx START QUEUE MANAGER SUCCESSFUL" may not be displayed on the TPF console. |
| PJ28715 | 17 | With APAR PJ27693 applied, OPR-4E0 and OPR-500 dumps can occur when certain LU 0 commands are sent. This APAR also corrects problems with LU 0 message sequencing. |
| PJ28716 | 17 | Adjusted CPU utilization may be calculated incorrectly. |
| PJ28720 | 17 | Support for a timeout on TPF MQSeries sender channels when connecting to remote MQSeries receiver channels. |
| PJ28722 | 17 | Random File Access Summary report may overstate FDCTC completions and DASD service times for devices having zero 'total accesses'. |
| PJ28723 | 17 | The GENSIP macro generates bad Stage II JCL because of APAR PJ28613. |
| PJ28724 | 17 | A deadlock condition between TO2 and file systems may occur as a result of APAR PJ28180. |
| PJ28725 | 17 | CTL-3C6 CLOE - INVALID 3270 WRITE COMMAND |
| PJ28726 | 17 | The Network Services Database (APAR PJ28195) does not work correctly with port numbers greater than 32 K. |
| PJ28732 | 17 | Program BPDH updates the error logging record without holding it. This may result in an erroneous multiple release count. This error is caused by APAR PJ27469. |
| PJ28737 | 17 | Correct error processing for errors detected in DYD9. |
| PJ28738 | 17 | Use a doubleword for the SUBDLC and ADDDLC macros. |
| PJ28739 | 17 | With APAR PJ28371 applied, an incorrect file address is reported by online message BWRA0400E after a recoup timeout. In addition, unpredictable results may occur during FON or sequential access processing; and attempts to dump specific areas of storage fail if the length of data to dump is between 32K and 64K. |
| PJ28745 | 17 | A CTL-6EA dump will occur if a CTL-6DB dump occurs during enter/back processing. |
| PJ28747 | 17 | When writing more than 64 KB of data to large TPF Collection Support (TPFCS) binary large object (BLOB) collections using the TO2_atRBAPut function, "UPDATE SEQUENCE COUNTER MISMATCH" (-6) errors may occur. |
| PJ28748 | 17 | Received CTL-6DF and CTL-4 dumps after applying APAR PJ28390. |
| PJ28751 | 17 | APAR PJ28323 causes an extra tape switch and a CTL-6E8 dump during PDU and recoup rollin. |
| PJ28755 | 17 | ZSTRC ALTER commands may undo previous ZSTRC ALTER commands. |
| PJ28757 | 17 | Add a user exit for looping catastrophic dumps. |
| PJ28758 | 17 | TPF MQSeries support for channel retry, definition capture, max handles, and sweeper enhancements. |
| PJ28759 | 17 | TPF enhancement to support a new ZEXEC command, which processes individual TPF commands from a file. |
| PJ28760 | 17 | Corrupted static storage may lead to further core corruption. This problem was caused by APAR PJ24091. |
| PJ28764 | 17 | With APAR PJ27023 applied, TPF MQSeries sender channels may send the incorrect number of message segments. |
| PJ28765 | 17 | Implement the fork and exec functions for TPF. |
| PJ28766 | 17 | SPPGML updates were left out for CHDDBG. |
| PJ28768 | 17 | Pre-recoup released file addresses may be reported as lost addresses by recoup. |
| PJ28770 | 17 | With TPF MQSeries APAR PJ25780 applied, there may be no response from a ZMQSC ALT CHL command if it is immediately preceded by ZMQSC DEF CHL. |
| PJ28771 | 17 | High-speed message counter enhancement to ensure that no messages go uncounted. |
| PJ28772 | 17 | With APAR PJ26188 applied, CTL-4s can occur when pipes are closed. |
| PJ28773 | 18 | The read and write counts displayed by ZSLDR are not correct when more than 65,535 records are processed. |
| PJ28774 | 17 | CP STACK CORRUPTION/MULTI DUMP ERRORS WITH PJ28649 APPLIED |
| PJ28775 | 17 | When converting CTKC to and from 32-way format, APAR PJ27785 fails to update the functional support console (FSC) indexes, causing FSC terminals to become inactive. |
| PJ28776 | 17 | Update the FACE Table Generator (FCTBG) to be more efficient with OS/390 storage when generating FACE tables (FCTBs). |
| PJ28777 | 17 | A CTL-7 system error dump may occur in BRUC. |
| PJ28780 | 17 | With APAR PJ28097 applied, a CTL-3 system error dump out of B1A6 may occur because of an incorrect branch on an FIWHC macro error. |
| PJ28781 | 17 | A CTL-571 may occur out of CCSTOR on the ICPTH_PLLCK lock. This problem resulted from APAR PJ26575 |
| PJ28782 | 17 | With APAR PJ28195 applied and TCP/IP native stack support not defined, data reduction will not run to completion. |
| PJ28783 | 17 | With APAR PJ27023 applied, all MQGET attempts from a common queue result in an OPR-200C8 dump when only a single message BLOB is corrupt. |
| PJ28784 | 17 | FILE NAMES > 6 CHARS THAT ARE THE SAME, NO DEBUG INFO |
| PJ28785 | 17 | The listing file is loaded incorrectly from the HFS. |
| PJ28786 | 18 | Provide LOG processing for MATIP devices. |
| PJ28787 | 17 | With APAR PJ26904 applied, the LOCAL parameter for the ZDTCP PING/TRACERTE commands does not work with multiple TCP/IP offload devices. |
| PJ28788 | 17 | Incorrect sequence number copied into the message block with APAR PJ28070 applied. |
| PJ28789 | 19 | Implement a Missing Attention Handler (MAH). |
| PJ28790 | 17 | Messages to indicate that insufficient SRM31A8, SRM41A8, SRM51A8, or SRM61A8 records are coded are missing the '8' at the end of the record type. |
| PJ28791 | 17 | Unable to establish new path for a CFLF connect device after consecutive path failures, resulting in lock request backups and a system outage. |
| PJ28792 | 17 | A CTL-2D error may occur if BR0FIL contains an incorrect address after an IPL. |
| PJ28794 | 17 | A CTL-C system error may still occur after APARs PJ25098 and PJ27570 are applied. |
| PJ28795 | 17 | An enhancement to TPF MQSeries support to add checks in the FACE table generator to ensure that the MQSeries checkpoint (IMQCK) records are processor unique. |
| PJ28796 | 17 | With TCP/IP native stack support (APAR PJ26683), inbound data can be lost when using activate_on_receipt (AOR). |
| PJ28797 | 17 | X'FDDC' records are being counted as lost addresses. |
| PJ28799 | 17 | Deadlock detection will not be kicked off in an input list shutdown condition. |
| PJ28801 | 17 | Unprintable characters in ZRHLD display of holders/waiters for special locks after APAR PJ28097 is applied. |
| PJ28802 | 17 | Loss of data during log recovery and loss of system heap during log takeover. |
| PJ28803 | 17 | FC33 records are not switched correctly during PDU and recoup. |
| PJ28806 | 18 | Loadset display is truncated if program names do not have version codes. |
| PJ28808 | 17 | CTL-6DF catastrophic error occurs during recoup phase 3. |
| PJ28809 | 17 | TPF Debugger Command view allows TPF commands to be entered. |
| PJ28810 | 17 | The Program Command Routing Service (PCRS) will route TPF commands from applications to the TPF system message processor (SMP) by line number, interchange address, and terminal address (LNIATA). |
| PJ28811 | 17 | HAVING ADR TAPE UP DURING RECOUP PREVENTS REBUILD |
| PJ28812 | 17 | ZGFSP DSP does not work correctly. |
| PJ28814 | 17 | With APAR PJ28161 applied, the activate_on_accept pending and posted bits are not cleared during an AOA timeout condition. |
| PJ28815 | 18 | ZDUPD E produces an OPR-I000340 dump. |
| PJ28817 | 17 | ZOLDR DISPLAY LOADSET command output may contain an unexpected end of message character that could cause problems with automated operations programs. |
| PJ28818 | 17 | After applying APAR PJ27785, a CTL-4 in CYPS may result on event wait errors. |
| PJ28819 | 17 | Multi-mod copy errors on a cylinder 4K or greater do not display correctly after applying APAR PJ26707. |
| PJ28820 | 17 | With APAR PJ27469 (online recoup and pools maintenance) applied, a CTL-10 may occur during TPF collection support (TPFCS) recoup processing. |
| PJ28822 | 17 | With APAR PJ26143 applied, failed attempts to add to an extended keyed collection due to corruption may appear successful. As a result, functions like MQPUT for shared queues may lose data. |
| PJ28823 | 17 | With APAR PJ24563 applied, a CTL-00C system error occurs following streaming CEFR0332E Positioning Lost messages. |
| PJ28824 | 17 | The check for a real-time module is not correct after applying APAR PJ26686. |
| PJ28825 | 17 | With APAR PJ28584 applied, all RIP messages sent after swinging a VIPA must contain a metric of 1. |
| PJ28826 | 17 | A CTL-10 error can occur in CP code called by SYSLOGD or DASD RCS. |
| PJ28827 | 17 | After a read error on the first cylinder, file copy does not abort. |
| PJ28828 | 17 | With APAR PJ21791 applied, a CTL-1 catastrophic error occurs during ZCLAW ACT ALL error processing. |
| PJ28830 | 18 | With APARs PJ25780 and PJ27830 applied, start and stop of sender channels, a CTL-3 system error dump or MQSERIES UNEXPECTED TO2 ERROR may occur. |
| PJ28836 | 17 | A CTL-34A or CTL-34C dump may occur after an ECB has ended because of a previous system error. |
| PJ28837 | 17 | The OSA gateway failure detection processing can erroneously mark gateways as failed when TPF is cycling to 1052 state or is in input list shutdown. |
| PJ28841 | 17 | The 20th multi-mod copy will not start because of a 'TO' MOD IS IN-USE message. |
| PJ28847 | 17 | Cannot display (or alter) the MCHR address. This problem was caused by APAR PJ28097. |
| PJ28848 | 17 | A CTL-3 may result when switching between programs. |
| PJ28849 | 18 | A CTL-1 or CTL-4 may occur when a client attempts to establish a TCP connection using an MSS value that is less than the size of the IP and TCP headers(40 bytes). |
| PJ28850 | 17 | With APAR PJ28344 applied, some packets that should be retransmitted will not, causing the sockets to stall or end unexpectedly. |
| PJ28851 | 17 | A CTL-1 error can occur in CTSS40 when an automatic swing of the VIPAs is initiated by the gateways failing. |
| PJ28853 | 17 | With APAR PJ27079 applied, TPFAR may take a CTL-4 due to an infinite loop using a user-supplied host name. |
| PJ28855 | 17 | Globals cannot be locked with APAR PJ28649 applied. |
| PJ28856 | 17 | Update ZRHLD to display the HOLDER/WAITER bits. |
| PJ28857 | 17 | If the existing attributes for a data store are INVENTORY and DELETE-DELAY, specifying NOINVENTORY and DELETE-IMMED on the ZOODB CHANGE command for this data store will cause a CTL-C11C to occur. |
| PJ28861 | 17 | Multi-mod copy timeout during end-of-job processing results in a CTL-4 out of CYPS. |
| PJ28862 | 17 | If a timeout occurs on a directory merge, abort Recoup. |
| PJ28863 | 17 | A CTL-22 system error may occur out of CHUR when an LU 6.2 transaction program using ACTIVATE_ON_RECEIPT experiences a session outage. |
| PJ28864 | 17 | ZFECB 000/EVNWC will cause a CTL-4 or CTL-6DA dump to occur. This problem was introduced by APAR PJ23981. |
| PJ28866 | 17 | With APAR PJ28339 applied, clearing a TPF MQSeries processor unique queue may result in a CTL-21 catastrophic error. |
| PJ28867 | 17 | With TPF MQSeries APAR PJ27023 applied, ZMQSC SWQ command processing for a queue with a large current depth may result in a catastrophic CTL-C dump. |
| PJ28868 | 17 | Permit full RCC support with ALTIDs and enhance the NAB and BCH parameters. |
| PJ28870 | 17 | A CTL-C dump may occur because of a lack of an SWB throttling mechanism for Time Available Supervisor (TAS) servicing. |
| PJ28873 | 17 | A CTL-3 error in CPAB occurs when trying to mount a module that took an OPR-1F1 dump in CPAI during dismount. |
| PJ28876 | 17 | LONG BUSY REDRIVE ON VM RESULTS IN LOCK I/O FAILURES |
| PJ28878 | 18 | Enhance PAUSC timeout detection introduced in APAR PJ28433. |
| PJ28880 | 17 | With APAR PJ26515 applied, an OPR-F9 dump may occur when entering a ZINET command during restart. |
| PJ28881 | 18 | Processor unique Capture/Restore keypoint record access may be incorrect after APAR PJ28097. |
| PJ28882 | 18 | TSTB2 Entry with information from a previous mount causes a CTL-766 system error dump during ZTVAR ADD processing. |
| PJ28883 | 17 | FFREC length in some cases. |
| PJ28884 | 17 | An incorrect UDP packet can be sent after APAR PJ27932 is applied. |
| PJ28887 | 17 | A correction to allow an 8-character ordinal number and to prevent corruption of the common block save area (EBW040). |
| PJ28888 | 17 | With APAR PJ28720 applied, idle MQSeries sender channels close after 10 seconds. |
| PJ28891 | 17 | A CTL-010 system error occurs from BCC2 when the NAB field is zero. |
| PJ28892 | 18 | Support the formatting DASD with more than 8737 cylinders. |
| PJ28893 | 19 | System hangs in restart because of RLOG recovery. |
| PJ28894 | 18 | THE BASE MODULE NUMBER CAN BE INCORRECT |
| PJ28895 | 18 | ZRECP SEL not checking to see if SEL is running already. |
| PJ28900 | 17 | APAR PJ25449 is too restrictive. |
| PJ28901 | 18 | Add Traffic Limiting and various other Network Services Database enhancements |
| PJ28902 | 17 | Problems with soft IPLs after applying APAR PJ27469. |
| PJ28903 | 17 | With APAR PJ28097 applied, an RIATA macro coded for FARF6 pools does not set the correct bits in the RIAT. |
| PJ28904 | 17 | CTL-5A catastrophic error. |
| PJ28908 | 17 | A hang condition may occur or records may not be filed out during a soft IPL after APAR PJ28097 is applied. |
| PJ28909 | 17 | FITS ITEM 74336: Adding information from the VisualAge registration window to the performance analyzer trace file. |
| PJ28910 | 17 | Unable to complete an exception recording or logging restore because the Exception Recording End or Logging End record is missing from the tape. |
| PJ28912 | 17 | With PJ28213 applied, the offline IP trace facility (IPTPRT) translates hexidecimal data into readable text incorrectly. |
| PJ28914 | 18 | Enhancement to prevent dump processing from hanging because of ISO-C (ISOC) stack corruption. |
| PJ28915 | 17 | With APAR PJ27530 applied, the base register for routine CPSEDFST is not restored in CPSL. |
| PJ28917 | 17 | A CTL-4 system error occurs when loading a C DLL or DLM. |
| PJ28923 | 17 | DBSRT problem with Recoup and ZRECP DISPLAY COUNTS. |
| PJ28924 | 18 | The stand-alone dump (SADUMP) utility may fail with a disabled wait state PSW. |
| PJ28925 | 17 | With APAR PJ26904 applied, the return code of sock_errno() is displayed incorrectly when bind() fails. |
| PJ28926 | 18 | The control unit lock table full recovery process does not work correctly when the system uses VFA Sync locks. The error is caused by APAR PJ25094. |
| PJ28927 | 17 | Unsolicited messages are not trapped by the Program Command Routing Service (PCRS). |
| PJ28928 | 17 | A CTL-10 system error from CFIX or an OPR-7777 system error from zfile programs may occur when piping and syntax is incorrect. |
| PJ28930 | 17 | A CTL-I094000 system error can occur when processing ZCLAW functional messages during restart. |
| PJ28931 | 17 | CRETC STATE=1052 may cause a CTL-EA dump. |
| PJ28932 | 17 | Appended message text is corrupted. |
| PJ28934 | 17 | With TCP/IP native stack support, invalid error return codes can be sent to the application after a TCP connection is established. |
| PJ28935 | 18 | ZFRST CAP ALL can result in a CTL-I000C system error because of an excessive number of FRST0114I ZEROED RECORD NOT RESTORED - NEVER CAPTURED messages being sent to the console. |
| PJ28936 | 17 | OPR-708 CATASTROPHIC |
| PJ28939 | 18 | 1) With PJ28195 applied, a CTL-4 system error can occur when sending fragmented UDP messages. 2) R3 does not always have the address of the IP header when queuing |
| PJ28940 | 17 | With APAR PJ26515 applied, the INETD server may be recycled if both PARM and XPARM are specified. |
| PJ28942 | 17 | One character in a DC instruction in copy segment CJ10240 was changed inadvertently to a different character when packaged on PUT 13. |
| PJ28943 | 17 | Some TPF source code contains unprintable binary characters or other incorrect character data that can affect readability. |
| PJ28945 | 17 | With APAR PJ25094 applied, SDELAY candidates are flushed from VFA during cycle-down. |
| PJ28947 | 17 | After installing APAR PJ27328, TPFDF segments are missing from PARS13. |
| PJ28948 | 17 | Enhancement to the IP packet filtering support (APAR PJ28213) to bypass the filtering rules for SYN/ACK messages. |
| PJ28951 | 17 | Sending a multi-block chained message to the 3270 PRC may cause auto screen clearing to stall. |
| PJ28952 | 18 | TCP/IP native stack activate_on_accept (AOA) function does not process new connection requests correctly. |
| PJ28953 | 17 | APAR PJ28431 OVERWRITES C++ COMPILER OPTIONS PAST NOMARGINS |
| PJ28954 | 17 | Support is being added to TPF MQSeries to allow ZMQSC CLEAR QL and ZMQSC DISP commands to function in any state other than during TPF restart. |
| PJ28955 | 18 | ALDR skips the next program after a load module in the load deck. |
| PJ28956 | 17 | A CTL-C138 system error may occur during cycle-down when not using the TPF mail server. |
| PJ28957 | 17 | Do not write to RECOUP log skipped records. |
| PJ28963 | 17 | Missing "end of FCTB relocation table" entry in IPLB may cause work block reduction. |
| PJ28965 | 17 | With APAR PJ25089 applied, the TPF file system is not marking a file's time stamp for update when a user writes to the file. |
| PJ28966 | 17 | When programs are registered by the TPF debugger, the activate_on_accept(AOA) and activate_on_receipt(AOR) functions can report the wrong return code to the application. |
| PJ28967 | 17 | With APAR PJ27785 applied, a CTL-I09400C system error may occur when ZINET DISP S-server is issued and system heap usage is increased dramatically. |
| PJ28968 | 18 | Remove padded blanks in the TPF APPN control point name (CPNAME) when building control vector 60 (fully qualified PCID control vector). |
| PJ28969 | 18 | Modify the calculation of storage required to support existing pool directories. |
| PJ28970 | 17 | APAR PJ22325 causes a CTKB retrieval error in IPLA on the first IPL after the loader general file load. |
| PJ28979 | 17 | With APAR PJ28888 applied, starting TPF MQSeries channels using TCP/IP offload sockets results in an unsupported setsockopt error. "MQSC0357E START SENDER CHANNEL - channelname FAILED SETSOCKETOPT ERROR, CHANNEL STOPPED" |
| PJ28981 | 18 | TPF MQSeries does not save the EBW area over calls to the MQ Bridge user exit. Results are unpredictable if the EBW area is altered by the user exit. |
| PJ28982 | 17 | Modify SIP to support a new PDS for open source header files. |
| PJ28993 | 17 | An IPL failed with error message CTIN0082E when the IOCP has more than 3840 DASD defined. |
| PJ28994 | 19 | Sending mail to an incorrect host name results in the mail message being put on the deferred queue instead of bounced back to the sender. |
| PJ28996 | 18 | Separate TCP keepalive timer value. |
| PJ28997 | 18 | Display of sockets that are using the most IP message table (IPMT) resources. |
| PJ28998 | 18 | OPR-041122 dump may occur in BCC2 for global record chain chase. |
| PJ29000 | 18 | With APAR PJ27785 applied, OSTG abends with "*S032* EXEC PARM SDPSID FORMAT ERROR" when a dash is used to specify a processor range. |
| PJ29001 | 17 | The VIPAC general macro and tpf_vipac() C/C++ function may attempt to move the VIPA with force. |
| PJ29003 | 17 | SYNCC in tightly coupled (TC) system results in a CTL-1 error with APAR PJ28649 applied. |
| PJ29005 | 17 | Nonzero pointers in the commit and rollback control table (CRTB) can cause a CTL-573 dump during IPL. This error is caused by APAR PJ27785. |
| PJ29007 | 17 | With APAR PJ25375 applied, a listener socket created with TPF offload TCP/IP support may still seem to be active in the NETSTAT table after the socket is closed. |
| PJ29011 | 17 | Reset lock time when the record hold table (RHT) queue is promoted. |
| PJ29012 | 18 | With APAR PJ28930 installed, a CTL-3 can occur after issuing a ZCLAW command. |
| PJ29013 | 18 | Only the first ordinal of the #BRIDTO8 record is copied to the #BRHIST8 record type. |
| PJ29014 | 18 | CTL-3 in B0P5 |
| PJ29016 | 18 | With APAR PJ27023 applied and there are queues with a large number of swept BLOBs with nonpersistent messages, a catastrophic CTL-C117 dump may occur when the ZMQSC START/STOP QMGR command is entered. |
| PJ29018 | 18 | BRV2 uses the wrong loop counter. |
| PJ29019 | 18 | ZRECP RESTART at the wrong time exits Phase 1. |
| PJ29020 | 18 | TCP/IP connect() does not detect duplicate sockets. |
| PJ29021 | 17 | With APAR PJ21791 applied, port numbers that are greater than 32767 and saved in the TCP/IP offload file descriptor table are displayed as negative numbers. |
| PJ29023 | 17 | CAPT NEEDS TO BE UPDATED TO SPECIFY PUT17 AS PUT LEVEL. |
| PJ29024 | 18 | Changes are needed to TPF C/C++ code and SIP to support the z/OS V1R2 compiler. |
| PJ29029 | 18 | CTL-1 on IPL when attempting to sync Sysplex Timer clock. |
| PJ29031 | 18 | With APAR PJ28758 applied, starting a sender channel may result in an Unexpected Channel Error 962. |
| PJ29032 | 17 | TPF MQSeries enhancement to provide a checkpoint monitor and to enable the sweeper during a TPF cycle whenever GFS is active. |
| PJ29033 | 18 | TPF syslog daemon logs partial strings and inconsistent time stamps. |
| PJ29036 | 18 | ZRECP ONEL REC-ALL may cause a CTL-3C7 on a 3270 console. |
| PJ29037 | 18 | Sockets that have an activate_on_receipt (AOR) pending will not be cleaned up by the socket sweeper after an application close() API is issued. |
| PJ29040 | 17 | APAR PJ27785 neglected to update a loop counter for 32-way processor support in CNAH. |
| PJ29041 | 18 | CTL-E00 can occur in loosely-coupled envirnoment |
| PJ29043 | 18 | When TCP/IP native stack client sockets bind to local ports in the server range (1-1023 and 5000-65535), incorrect data can be displayed in ZDTCP NETSTAT and the wrong network services database entries may be updated when counting messages. |
| PJ29044 | 17 | With APAR PJ28267 applied, MATIP Type-A host-to-host sessions will not work. |
| PJ29045 | 17 | DEREFERENCED LOCAL VARIABLES DELETED ON BLOCK CHANGE. |
| PJ29046 | 17 | With APAR PJ26143 applied, TO2_createReadWriteCursor on an extended keyed collection may fail with a CTL-4. |
| PJ29056 | 18 | The TO2_remove API may incorrectly issue a return code indicating an error has occurred. |
| PJ29057 | 18 | With APAR PJ27785 applied, if the keypoint control record is in pre-32-way format, the keypoint control record is corrupted when loading keypoints and keypoint patch records in the same load deck. |
| PJ29058 | 18 | CTL-61 from CSS8. |
| PJ29059 | 19 | TPFCS will automatically attempt to fix a corrupted master control record when found by updating an existing record with valid data. This can cause more corruption if another application is still using this record. |
| PJ29060 | 18 | Restarting a TPF client socket that binds to a specific local port after an IPL can cause the connect() API to hang. |
| PJ29061 | 18 | With PJ28339 applied, TPF MQSeries displays an incorrect date when processing a ZMQSC DISPLAY CHS-ALL LSTMSGDAT command. |
| PJ29062 | 17 | Enhancement to TPF MQSeries to support MQGET with browse, search, and lock. |
| PJ29063 | 18 | GENSIP produces incorrect compiler options for USOTDC, CGSTDC, and UGSTDC. |
| PJ29065 | 17 | With APAR PJ29032 applied, TPF MQSeries checkpointing will result in a CTL-3 dump out of CMQK when more than 8000 SWBs worth of messages exist on a queue or in a CTL-4 dump out of CMQM during TPF restart. |
| PJ29067 | 18 | IPC does not always indicate a successful return for inter-I-stream communication. |
| PJ29069 | 18 | With APAR PJ27302 applied, CLME must initialize fields in the auto storage block that it allocates. |
| PJ29070 | 18 | A CTL-4 system error may occur in applications (such as TPF MQSeries) that use TPFCS cursor APIs for collections that use flat structures. |
| PJ29071 | 18 | CTL-3C7 dump provides insufficient data for diagnosis. |
| PJ29074 | 18 | When APAR PJ21791 is applied, a CTL-1 system error occurs during claw_send() error processing. |
| PJ29075 | 18 | APAR PJ27785 does not set the event count following the SIPCC to switch RTA tapes. |
| PJ29076 | 19 | With APAR PJ27023 applied, the TPF MQSeries queue manager will remove nonpersistent memory messages that are in a commit scope on a ZMQSC STOP QMGR command. The active commit scopes will then fail with either a CTL-6D9, CTL-C13C, or CTL-3 at commit time. |
| PJ29077 | 18 | TPF Internet Mail Server Administrative Enhancements |
| PJ29079 | 18 | Value FLDCNT in SYNLST is too high. |
| PJ29080 | 18 | With APAR PJ28759 applied, the ZEXEC command fails even though the command read from the command file completed successfully. |
| PJ29081 | 18 | RECOUP MAX ECB VALUE NOT KEPT ON RESTART FOLLOWING IPL |
| PJ29083 | 18 | Implement various enhancements involving file system integrity, FTP throttling, and capture/restore logging capability. |
| PJ29085 | 18 | CVLA is not turning off the AAA File Address Present bit (WG0FAP) for a failing 3270 local device, which later may cause an OPR-0210F0 dump while the local line is being restarted. |
| PJ29086 | 18 | With APAR PJ28759 applied, the ZEXEC command can result in a CTL-4. |
| PJ29087 | 18 | CTL-4 system error occurred during commit process of a transaction including delay file records and caused a CTL-C13C catastrophic error. The error was injected by APAR PJ25094. |
| PJ29089 | 17 | As a result of C++ segments introduced with TPFDF APAR PQ51955, the SIP package needs to be updated. |
| PJ29090 | 18 | With APAR PJ24557 applied, the ALASC macro may corrupt the format flag of auto storage frames when the TPF system is running in block check mode. |
| PJ29095 | 18 | With APAR PJ19966 applied, a CTL-4 system error dump may occur after excluding a library load module in a selectively activated loadset. |
| PJ29096 | 18 | With APAR PJ28097 applied, the size of bcasect in c$vfac is incorrect. |
| PJ29104 | 18 | Message DTCP0044E has a missing reason code. |
| PJ29109 | 18 | The record hold table (RHT) may not be promoted because of a CTL-32 dump. |
| PJ29110 | 18 | With APAR PJ28965 applied, closing pipes causes an OPR-I007511 dump,"ERROR GENERATING THE FILE ADDRESS OF ORDINAL FFFFFFFF OF RECORD TYPE INODE". |
| PJ29111 | 18 | With APAR PJ28799 applied, a SNAP-3E0 system error occ urs when IPLing from the loader general file because of a STIMC macro call to activate deadlock detection program cl40. |
| PJ29113 | 18 | TCP/IP native stack fast retransmit support (APAR PJ28344) is skipped when the socket is in send window blocked state. |
| PJ29114 | 18 | With APAR PJ28526 applied, the offline IP trace facility may not generate formatted traces. |
| PJ29116 | 18 | With APAR PJ28064 applied, a timing problem can cause a CTL-571 catastrophic locking dump. |
| PJ29117 | 18 | Enhance TPF MQSeries to check for corrupt message SWBs. |
| PJ29118 | 18 | Provide support for new socket APIs: tpf_read_TCP_message() and activate_on_receipt_of_TCP_message(). |
| PJ29120 | 18 | MATIP devices are bypassed by ZSNDU command processing. |
| PJ29121 | 18 | CTL-4 system error dump occurs when running the performance analyzer (PA). |
| PJ29123 | 18 | After PJ27189 a CC3 when reading Keypoint I gives incorrect error message. |
| PJ29124 | 18 | Multi-mod copy abort processing causes a bottleneck on keypoint 6 by forcing all processors to make the same update. |
| PJ29125 | 18 | MPIF startup may hang following APAR PJ27391. |
| PJ29129 | 18 | After applying APAR PJ28097, issuing ZFRST LOG may request that the incorrect tapes be mounted. |
| PJ29130 | 18 | A CTL-577 dump may occur after applying APAR PJ28480. |
| PJ29131 | 18 | Problem with ZRPDU CREATE EXC |
| PJ29132 | 18 | With APAR PJ28758 applied, 9323 DATA LENGTH IS TOO LARGE OR NOT VALID or 9300 COULD NOT GET STORAGE FOR SWEPT BLOB errors occur on an MQGET of a swept message. Browsing of a swept queue is also exceptionally slow. |
| PJ29137 | 18 | The ZFILE tail command produces a CTL-75 out of CFIL under certain conditions. |
| PJ29142 | 18 | With APAR PJ25375 applied, the gethostbyname() TCP/IP API may return incorrect information or a CTL-4 system error may occur. |
| PJ29144 | 18 | TCP/IP Congestion Control and Avoidance |
| PJ29145 | 18 | APAR PJ27945 activating RCS timers for nonlocking CUs. |
| PJ29146 | 18 | When the system console is running in Multiple Console Support mode, FSC routing codes may not be set correctly for certain messages sent to the PRC. |
| PJ29151 | 18 | ZSLDR output messages may hang printers. |
| PJ29153 | 18 | PAUSC macro should be restricted. |
| PJ29156 | 18 | RCS RESTART stores CFWID after an SSID entry is removed. |
| PJ29159 | 18 | Make debugger files complient with the Z/OS 1.2 compiler. |
| PJ29160 | 18 | Provide DECB Support for Tape functions. |
| PJ29162 | 18 | A CTL-2 system error occurs during tape dump processing because R13 was not saved around a call to TCLSC. |
| PJ29163 | 18 | A CTL-10 dump may occur in event processing after applying APAR PJ27387. This is most often seen when issuing a ZOLDR ACT or ZOLDR DEACT command. |
| PJ29164 | 18 | APAR PJ28314 erroneously deletes the BRID call for TO2 in BSSC. |
| PJ29171 | 18 | TOD clock confirmation may not work. |
| PJ29172 | 18 | With PJ28136 applied, TPF MQSeries trigger monitor may cause high CPU utilization. |
| PJ29173 | 18 | With APAR PJ28464 applied, messages in the batch are not discarded after an IPL. This results in duplicate messages sent to the remote system. |
| PJ29176 | 18 | Incorrect characters can be displayed in the SYFCTB macro generated by the FACE table generator (FCTBG). This can prevent the SYFCTB macro from assembling. |
| PJ29177 | 18 | When entering a ZSTIM command and nothing is specified in the MSG parameter, a CTL-4 dump occurs. |
| PJ29181 | 20 | Tolerate known PPRC path failures so that the copy group is not halted and the copy services monitor does not exit. Also, a CTL-230 was found in CXCW due to PJ30677. |
| PJ29183 | 20 | With APAR PJ25780 applied, an OPR-I0000EB, UNAUTHORIZED USE OF MACRO, can occur in TPF MQSeries applications. |
| PJ29184 | 18 | A CTL-3 may occur when entering ZPOOL GENERATION INIT or ZPOOL GENERATION CREATE. |
| PJ29189 | 18 | Correct assembly errors for BK0RP macro call using a suffix. |
| PJ29190 | 18 | CCCCP1/CLPA receives ASMA045W assembly warnings after APAR PJ28622 is applied. |
| PJ29191 | 18 | TPF MQSeries support for message expiry. |
| PJ29192 | 18 | With PJ27023 applied, starting all TPF MQSeries channels may result in I200FA TO2 UNABLE TO ALLOCATE MALOC STORAGE or MQSC9998E unexpected channel error 536895543. |
| PJ29193 | 18 | Deactivated pools are not being logged when REFFROM=DEACTIVATION is specified. |
| PJ29198 | 18 | Recoup aborts if ZRECP RESUME is entered in recoup phase 1. |
| PJ29200 | 18 | ZDUPD E command may display incorrect information. |
| PJ29201 | 18 | Select function problems with nonsocket descriptors. |
| PJ29207 | 18 | No ECB available when trying to log DASD error during CTL-C processing. |
| PJ29209 | 18 | With APAR PJ28213 applied, ZSOCK INACT processing may leave some sockets active that should be deactivated. |
| PJ29210 | 18 | There is the potential for a CTL-732 dump, which leaves the console disabled, during 3215 automatic fallback processing. |
| PJ29212 | 18 | Corrupted TPFDF core block pointers (CE1DFSTK) may cause a CTL-4 to occur when the system attempts to release these blocks when block check mode is active. |
| PJ29213 | 18 | TPFDF FARF6 Infrastructure Support |
| PJ29214 | 18 | Enhance TPF MQSeries to display the number of SWBs that are currently in use by MQSeries and the number of aborted sweeps occurring for a specific queue. |
| PJ29215 | 18 | ZRPDU CREATE slowed drastically by LODIC with SUSPEND. |
| PJ29216 | 18 | Application log messages are misrouted to the Log Processor. |
| PJ29217 | 18 | With APAR PJ28622 applied, the first write message to the 3215 console may not always be displayed. |
| PJ29218 | 18 | Miscellaneous updates. |
| PJ29219 | 18 | Obsolete the NC2EC Pool Deactivation Record and use the IPART to check for deactivated pools. |
| PJ29220 | 18 | BPDH40 CTL-4 IN RECOUP PHASE 1 |
| PJ29221 | 18 | IPC does not stop in restart with APAR PJ27785 applied. |
| PJ29225 | 18 | With APAR PJ27023 applied, when nonpersistent messages are sent or received on a fast sender/receiver channel, a sequence number error may occur on the subsequent start of the channel. |
| PJ29226 | 18 | With APAR PJ28791 applied, incorrect use of the index register in program cyed.asm may result in a CTL-6DA system error. |
| PJ29227 | 18 | Copy cannot be aborted if the owning processor IPLs during abort. |
| PJ29229 | 19 | System may get into C13C catastrophic dump loop if a transaction is committed, but cannot be hardened to the file. |
| PJ29236 | 18 | TPF TCP/IP native stack support may send an ACK erroneously when data arrives for an application that has already issued a close(). |
| PJ29238 | 18 | With APAR PJ29062 applied, swept memory queues may become corrupt, causing CTL-4 errors, OPR-9320 errors, or other unpredictable results. |
| PJ29240 | 18 | Correct PDU resource checking. |
| PJ29241 | 18 | With APAR PJ28702 applied, 3270 prime CRAS keyboards may get locked out early in restart if a command is used to clear the "MORE..." message before the TOD clock has been enabled. |
| PJ29243 | 18 | With PJ29062 applied, a TPF MQSeries CTL-9323 dump from CUIU may occur during TPF restart. |
| PJ29244 | 18 | After applying APAR PJ28129, an error with a return code 4 will occur from @@entrc during the link step. |
| PJ29246 | 18 | With APAR PJ28324 applied, attempts to send out RIP messages while in Restart can cause control dumps in the IPSDC service routine. |
| PJ29247 | 18 | A CTL-1 system error or other unpredictable results may occur when using the ZSTRC command to alter TPF tracing options. |
| PJ29248 | 18 | Timing problem can occur, causing the TPF DNS server to fail after an IPL. |
| PJ29249 | 18 | OPR-1F1 out of CPAI during GF dismount processing |
| PJ29251 | 18 | The performance analyzer (PA) is not recognizing that the program has trace hooks set. |
| PJ29254 | 18 | Unable to restart PDU verify process. |
| PJ29259 | 18 | With APAR PJ28219 applied, a CTL-6D9 system error may occur during tape switching. |
| PJ29268 | 18 | With PJ29118 applied, a length error or lock error can occur. |
| PJ29270 | 18 | With APAR PJ27028 applied, the FTP server may cause file corruption when receiving large files in ASCII mode. |
| PJ29271 | 18 | A TDTAC macro with an incorrect length causes unpredictable errors. |
| PJ29272 | 18 | The ZFCAP STATUS display shows the IOTIME parameter as being the same for all processors. |
| PJ29273 | 18 | With PJ28849 applied, new TCP connections can be rejected. |
| PJ29274 | 18 | The ZSTRC ALTER ENTER NOMACRO command gives inconsistent results. |
| PJ29280 | 18 | A CP call to the ESFAC macro for a 4-byte address could fail or provide incorrect information because the high-order 4 bytes of the 8-byte file address are not cleared. |
| PJ29282 | 18 | Correctly set up selective activation levels for the debugger ECB (corrects APAR PJ27905). |
| PJ29284 | 18 | BS0D treats MU0SSU like a fullword instead of a halfword. |
| PJ29285 | 18 | TPF Support for LLR. |
| PJ29286 | 18 | An OPR-428 dump may occur from ASF1, during 3270 input map processing. |
| PJ29288 | 18 | CSTRTL user exit. |
| PJ29289 | 18 | Keypointing added in APAR PJ29164 used an incorrect register. |
| PJ29290 | 18 | With APAR PJ28856 applied, ZRHLD DISPLAY in restart may not work for multiple locks. |
| PJ29293 | 18 | A CTL-1 in enter/back processing may occur after an ECB has corrupted the CE1PSW field. |
| PJ29295 | 18 | ZRHLD DISPLAY FA may not work during module copy. |
| PJ29296 | 18 | The CYYC keypoint retrieval routine may not time out correctly if the issuing processor enters input list shutdown. |
| PJ29297 | 18 | With APAR PJ28097 applied, VFA may reinitialize itself on an IPL. |
| PJ29298 | 18 | With APAR PJ28344 applied, window size calculation is incorrect |
| PJ29299 | 18 | VA/TPF Performance Analyzer causes CTL-4 in CPA0. |
| PJ29302 | 18 | Disabled wait state during re-IPL on faster processors. |
| PJ29306 | 18 | ZFCAP STATUS MODULE will only return status for the first 1024 modules when more than 1024 modules are defined. |
| PJ29307 | 18 | Correct errors caused by APAR PJ29171 when a loosely coupled complex is running on VM. |
| PJ29308 | 18 | With PJ28591 applied, a CTL-75 system error may occur out of CMVO when moving a VIPA with the force option specified. |
| PJ29309 | 18 | Provide support for greater than 16 LPARs |
| PJ29310 | 18 | ZPOOL GENERATION UPDATE has errors when more than 512 directories are in a pool section. |
| PJ29312 | 18 | Export the terminate and set_terminate functions. |
| PJ29313 | 18 | A CTL-4 dump results from ZLDLE CU ALL and ZLAEC ALL commands if there are no control units defined to the TPF system. |
| PJ29314 | 18 | CTL-E00 system error can occur with B0PE in a loosely coupled environment. |
| PJ29315 | 18 | TPF Performance Analyzer problem with nesting in trace files including TPF enter without return macros. |
| PJ29317 | 18 | After applying APAR PJ29083, C++ programs may fail to compile correctly and will receive CBC1263 syntax errors. |
| PJ29318 | 18 | Pool monitor may fail to issue warning messages on a processor with little or no pool activity. |
| PJ29319 | 18 | OPR-4 system error in BAM0. |
| PJ29320 | 18 | Update message MCPY0205T to specify which module is already in copy. |
| PJ29322 | 18 | Transaction drain loop problem at processor deactivation. |
| PJ29323 | 19 | Pool deactivation does not process chain blocks correctly. |
| PJ29324 | 18 | PDU does not work correctly in CRAS state. |
| PJ29326 | 18 | Multiple CEEMGET error messages when analyzing Apache code. |
| PJ29327 | 18 | TPF performance analyzer mkdir error message. |
| PJ29328 | 19 | Support increased MPLF lockspace for Enterprise Storage Server (ESS). |
| PJ29333 | 18 | With APAR PJ25089 applied, paths containing unnecessary leading or intermediate slashes are interpreted incorrectly. |
| PJ29335 | 18 | With APAR PJ26693 applied, a CTL-3 system error occurs when MATIP is entered from a customer application and MATIP is not active. |
| PJ29336 | 18 | Incorrect ordinal count displayed for Phase I status. |
| PJ29339 | 18 | Recoup pseudo directory handling is not correct in 1052 state. |
| PJ29341 | 18 | TO2_more and TO2_atEnd may not always return the correct result for a read cursor on a compact keyed collection if the collection is updated by a write cursor. |
| PJ29343 | 22 | ERA 50 during tape switch causes switch to hang
|
| PJ29344 | 18 | Recoup may not correctly count the remaining number of fixed errors when the ZRECP SEL command has been entered. |
| PJ29346 | 18 | Pool directory set sizes are not being copied on a pool reconfiguration. |
| PJ29348 | 18 | With APAR PJ26683 applied, a CTL-C dump may occur when cycling below CRAS state with a large number of outstanding AOA or AOR requests. |
| PJ29350 | 18 | A CTL-573 system error may occur during the setup for the CTL-C dump. This problem was injected by APARs PJ21167 and PJ26575. |
| PJ29352 | 18 | With APAR PJ29083 (PJ29317), C++ programs may pack subsequent structures incorrectly. |
| PJ29354 | 18 | Negative ECB counter in BRFM. |
| PJ29356 | 18 | VA/TPF performance analyzer produces CTL-I00C11F dumps. |
| PJ29357 | 18 | CTL-3 error in PTV0. |
| PJ29358 | 19 | Upgrade the coupling facility (CF) TPF lock distribution algorithm for prime/dupe module pairing. |
| PJ29360 | 18 | IP address translation on the firewall causes debugger connection to fail. |
| PJ29361 | 18 | The ZFCAP STATUS MODULE ALL command, introduced by APAR PJ27197, fails to display modules remaining when ZFCAP ALL has been entered. |
| PJ29362 | 18 | The ZDTCP command can fail when using the DEFINE option. |
| PJ29363 | 18 | 'Trace By Terminal' debug entry can be assigned to the wrong terminal if an incorrect comparison instruction is used in the matching routine. |
| PJ29366 | 18 | With APAR PJ25094 (VFA Synchronization SPE) applied, ZRTDM MOD results in a catastrophic CTL-6DF error (no available IOBs) when changing from VFAF-SIMMED to VFAF-NO. |
| PJ29367 | 18 | ZNOPL BUILD does not rebuild the SNA tables on processors 9 and above. |
| PJ29369 | 18 | ZCACH command may not recognize mixed case entries |
| PJ29370 | 18 | A step over return statement in C code causes the application to run to completion. |
| PJ29371 | 18 | Use strtoll and strtoull for converting a string to a long long in the asLongLong and asUnsignedLongLong functions. The strtoll and strtoull functions perform better than istrstream::iss |
| PJ29372 | 18 | Invalid processor ordinal may be used when IPLing with restored keypoints, causing the IPL to fail. |
| PJ29375 | 19 | TPF MQSeries QMGR erroneously starts following ZCYCL from 1052 to CRAS or MESW state. |
| PJ29376 | 20 | With APAR PJ29117 applied, ZMQSC DISP QL-qname DEBUG may result in a catastrophic OPR-9324 system error. |
| PJ29378 | 18 | Output message transmission (OMT) processing hangs the TPF system or else a CTL-03 system error may occur. |
| PJ29379 | 19 | A CTL-38 cached unlock failure may occur after a CTL-3A dump. |
| PJ29380 | 18 | Communications-related messages should also be sent to the COMM and AUDT FSCs during system cycling. |
| PJ29381 | 18 | The MORE... message that is being sent to a 3270 PRC or 3270 local console may be placed in the wrong screen location. |
| PJ29382 | 18 | R15 not valid after APAR PJ28622 and CTL-10 condition. |
| PJ29383 | 18 | With APAR PJ21791 applied, a 9102 SNAP error and CTL-3 occur during the deactivation of a TCP/IP offload device. |
| PJ29385 | 18 | With APAR PJ29296 applied, the CYYC keypoint retrieval routine may not time out correctly. |
| PJ29388 | 18 | When issuing a ZFCAP STATUS command from a processor whose ordinal number is higher than a processor ordinal that is inactive in the complex, the tape status information in the message is not completed and is missing the CP status for tape drives. |
| PJ29389 | 18 | A CTL-C system error may occur after applying APAR PJ27847. |
| PJ29390 | 18 | With APAR PJ28435 applied, the default value of MQCCSI_Q_MGR was correctly set to 0 rather than 500. However, the TPF MQSeries queue manager does not update the CodedCharSetId field in the MQMD to match its own CCSID. |
| PJ29391 | 18 | With APAR PJ28591 applied, CTL-4/CTL-10 dumps may occur when returning socket blocks to the system. |
| PJ29392 | 20 | With APAR PJ25094 applied, a deadly embrace can occur between DASD locks after a module status change. |
| PJ29394 | 19 | With APAR PJ27023 applied, ZPSMS PROC FORCE DEACT fails with CTL-8 if the TPF MQSeries QMGR is not defined. |
| PJ29395 | 18 | OPR-I0412F5 dump can occur during recoup timeout after APAR PJ28739 is applied. |
| PJ29396 | 18 | TPF SOAP support delivers the ability to process SOAP messages on the TPF system. It also adds TPF-specific C functions for converting EBCDIC to or from Unicode and Latin1. |
| PJ29398 | 18 | Message "Error Occurred" is too vague. |
| PJ29401 | 19 | When doing a ZAPGM on NUCL at displacement FCC or FCD, or FCE or FCF, ZAPGM gets a CTL-4. |
| PJ29402 | 18 | ZFECB does not allow for an 8-byte ECB address. When ECB addresses are 8 bytes long, we do not display the high- order byte. |
| PJ29403 | 18 | CPSE may be hung in an infinite loop because of APAR PJ21167. |
| PJ29404 | 18 | With APAR PJ27785 applied, receive error DSMG0070E occurs when mounting extended GDS volumes. |
| PJ29407 | 18 | Possible system hang occurs following a C121 dump after FILUC in CMVO. |
| PJ29409 | 18 | Recoup Phase 1 ECBs exit incorrectly. |
| PJ29411 | 18 | With APAR PJ28849 applied, a SNAP-785C dump occurred for UDP packets with no data. |
| PJ29412 | 18 | A CTL-4 might occur during Recoup in method recoupRecordObject of CJ00 if pool records have been corrupted. |
| PJ29413 | 18 | APAR PJ29077 version of tpfmail.h dropped APAR PJ28943. |
| PJ29418 | 19 | With APAR PJ27023 applied, MQSeries APIs executed while the application ECB can be suspended by LODIC may cause MQSeries to hang with queue locks outstanding. This may cause the recovery log to fill and result in a catastrophic CTL-C117. |
| PJ29420 | 18 | Correct PDU resource checking caused by APARs PJ28808 and PJ29240. |
| PJ29422 | 18 | An ECB may be lost if a dump occurs during SNAPC processing. |
| PJ29424 | 18 | With PJ28849 applied, a TCP/IP connections can be rejected. |
| PJ29425 | 18 | With the OSA polling enhancement (APAR PJ28064) applied, some hardware utilities may report TPF CPU utilization incorrectly. |
| PJ29427 | 18 | FAC8C ignores the first 4 bytes of the input 8-byte ordinal number for non-FARF6 requests. |
| PJ29428 | 18 | A CTL-571 deadlock condition may occur involving CMMPRCLK and the event table with CLAW. |
| PJ29430 | 18 | Provide support for open XML Debugger registration. |
| PJ29431 | 18 | ZPOOL GENERATION RECONFIGURE error messages. |
| PJ29432 | 18 | TPF MQSeries support for date/time in MQMD during MQPUT/MQPUT1. |
| PJ29433 | 18 | Recoup directory integrity checks failed. |
| PJ29434 | 18 | The first waiter field of the ZDLCK DISPLAY MOD output is truncated. |
| PJ29436 | 19 | New AOR interface that has the address of data in EBW024 - EBW027 for future considerations. |
| PJ29437 | 18 | Support for TPF MQSeries Instrumentation Events. |
| PJ29439 | 21 | COPY SERVICES RESULTS IN XCPY0031E MSG AFTER ZMCPY |
| PJ29440 | 19 | Various mail( ) API updates. |
| PJ29441 | 18 | TPF tape requires separate CE and DE for rewind. |
| PJ29442 | 18 | The unsolicited message policing routine may not delete all expired messages correctly. |
| PJ29443 | 18 | With APAR PJ26693 applied, a MATP0022E HOST FILE ERROR error message is displayed during system cycle-up if the MATIP_DS data store is not created or is deleted. |
| PJ29446 | 18 | With APAR PJ29191 applied, TPF MQSeries unsweep processing may corrupt a message SWB and cause a CTL-10 and/or a catastrophic CTL-9324. |
| PJ29447 | 18 | The TCP/IP native stack can inadvertently close connections when the remote advertises a zero window for too long. |
| PJ29448 | 18 | BWRT does not handle byte BL0FMT correctly. |
| PJ29450 | 18 | With APAR PJ28213 applied, sockets that should be cleaned up may not be, and a CTL-4 or a CTL-1 system error can occur from the TPF socket sweeper. |
| PJ29451 | 19 | If the CE1CPD field does not contain the processor ID of the local processor, unpredictable behavior can occur. |
| PJ29454 | 18 | A CTL-3 error from CTFT may occur when processing paths containing dots (..). |
| PJ29456 | 19 | ZTGRP DISPLAY command was incorrect for devices assigned to all subsystem users. |
| PJ29459 | 18 | Entering ZRECP DEL EX without a record ID will result in a CTL-4 system error. |
| PJ29463 | 18 | Performance analyzer should not be exempt from CTL-588 with APAR PJ28433. |
| PJ29465 | 19 | Small enhancements for TPFAR. |
| PJ29468 | 18 | ZPOOL GENERATION CREATE fails to turn on the bits in CY1PCM for SLT pools on devices B, C, and D. |
| PJ29469 | 18 | Individual IP trace support (APAR PJ27617) does not trace SYN/ACK messages correctly. |
| PJ29470 | 19 | With APAR PJ27028 applied, an FTP client that displays a large directory may result in a CTL-4 from CFTP. |
| PJ29474 | 18 | CTL-3 dump in CVBA caused by ZAFIL segment CVBC relying on the EBX060 area to be cleared at ECB initialization. |
| PJ29475 | 18 | Updates to the TPF Mail makefile are not included in the TPF Mail source tar file shipped for APAR PJ29077. |
| PJ29476 | 18 | ZRECP DISPLAY COUNTS may cause a CTL-4. |
| PJ29477 | 19 | TPF MQSeries support for stopping all channels with ZMQSC STOP CHL-ALL takes too long and does not disable all Receiver channels. |
| PJ29482 | 18 | Streaming CTL-6DA dumps may occur in block check or VEQR mode if the CE3LPNL field is corrupted. |
| PJ29483 | 18 | Header file i$pwbl.h in APAR PJ29201 dropped the code from APAR PJ28901. |
| PJ29484 | 19 | With TPF network services database (NSD) support (APAR PJ28195) applied, CTL-4 system errors may occur when sending output packets. |
| PJ29485 | 19 | A CTL-1 dump is taken immediately after CP RESTART MSGPROC is entered to restart a coupling facility. |
| PJ29487 | 18 | The status display wraps at greater than 16 milliseconds (ms). |
| PJ29490 | 19 | Correct detection of circular chain chases. |
| PJ29492 | 18 | With PJ29062 applied, TPF MQSeries messages that are swept and unswept may get corrupted. |
| PJ29493 | 18 | An IPL from the loader general file may fail with an IPLA0056T error because of APAR PJ27785. |
| PJ29494 | 18 | ZDUPD EVNTC timeout is not sufficient for a large pool segment. |
| PJ29496 | 19 | With APAR PJ28901 applied, CPU degradation can occur with sockets using activate on receipt (AOR). |
| PJ29497 | 18 | 'FDDC' records are counted as a lost addresses. |
| PJ29498 | 19 | Using RTNLST=R0 in CRESC causes a CTL-3 dump. |
| PJ29499 | 18 | ZIPDB DISPLAY command for APAR PJ28901 does not display the correct output counts. |
| PJ29500 | 18 | conv and conu type should be ISA rather than RT. |
| PJ29501 | 18 | With APAR PJ29077 applied, a CTL-4 dump can occur in CMN0 and CMN5 when block checking mode is turned on. |
| PJ29502 | 18 | A CTL-75 dump might occur when using the TPF Internet Mail Server mail( ) API. |
| PJ29504 | 19 | Tapes that are loaded by TPF from an IBM library do not have their category updated immediately, allowing for the possibility that they could accidentally be used by another operating system. |
| PJ29507 | 18 | Data Reduction reports only show the last four digits of shutdown values. |
| PJ29508 | 19 | When three or more logical paths are defined to a tape device, COSK0096E Attention Processing Failed messages may occur. |
| PJ29513 | 18 | Underscores handled as end-of-message to 3270 RO. |
| PJ29515 | 18 | TPFDF APAR PQ80141 requires TPF changes because PQ80141 introduced a new ECB field, CE2DFRET. |
| PJ29518 | 18 | A CTL-10 may occur during PDU rollin with the SEL or EXC options. |
| PJ29519 | 18 | Ensure that message ACRS0045W always is routed to the Prime CRAS (PRC). |
| PJ29520 | 18 | With APAR PJ28136 applied, if there are a large number of MQSeries queues defined on TPF, the trigger monitor may issue an excessive number of dlayc function calls, causing the activation of processes for queues defined as Trigger Every to be delayed unnecessarily. |
| PJ29523 | 18 | ONCODE 310 in POOL_PRT routine of JRS3 after TCP/IP input message counter wraps. |
| PJ29524 | 18 | The ZRPDU CREATE EXC and ZRPDU DISP commands do not accept as input and do not display the last processor in the complex. |
| PJ29526 | 19 | Allow the entrc() function to be used in C++ code and C code compiled with the DLL option. |
| PJ29529 | 19 | ZSTAT displays the wrong value for the created ECB data collection counter if the number of created ECBs is greater than 0x80000000. |
| PJ29533 | 19 | CTL-571 dumps may occur erroneously under VM or shared PR/SM when another I-stream holding the lock gets paged out. |
| PJ29534 | 19 | Description of bit 8 of byte 9 in SYSTG is incorrect. |
| PJ29537 | 20 | APPN link activation XID3 failure, SENSE 010000200000 and 010000110000, occurs because TPF attempts to use a transmission group (TG) number that is already assigned to an active link. |
| PJ29538 | 19 | CTL-3 dump occurs from BXTB following ZFCAP MOD processing after ZFCAP ALL has completed and exception recording is running. |
| PJ29539 | 18 | SIP generates a CTDF for any system that is non-BSS. |
| PJ29540 | 19 | An error in APAR PJ28626 may cause a sequence error in ZRECP RERUN. |
| PJ29541 | 19 | With APAR PJ25780 applied, a TPF MQSeries receiver channel may cause a long-running ECB (CTS7) if the channel is started after the channel sequence number is reset and there is no message activity on the channel. |
| PJ29543 | 19 | MPIF 32-way loosely coupled processor migration (APAR PJ27785) may incorrectly convert #CB8HD records to #HDREC records causing CTL-2E dumps and incorrect information saved in the hardware record. |
| PJ29545 | 19 | CTL-5A followed by a TCTL0001E online error message indicating that the CCW was x'43'. |
| PJ29547 | 19 | If a TPF MQSeries queue contains only messages that have expired and an application attempts to get a message from that queue, the queue empty trigger will not be set even though the application receives a return code indicating that there were no messages on the queue. |
| PJ29548 | 19 | A SNAP-C62113 dump may occur out of CSBQ when processing a negative LOCATE reply PIU with "procedure terminated" indicated in the CDINIT GDS variable. |
| PJ29549 | 18 | IPTPRT reads more file records than necessary if date or time criteria are specified. |
| PJ29552 | 18 | SNAPC I00000085 in CLPA is not dumping the correct information. |
| PJ29553 | 19 | CTL-04 system error occurs when an application routes a chained message with a character count greater that 4 K in the chain. |
| PJ29556 | 18 | With APAR PJ29086 applied, ZEXEC command processing of mixed case commands, such as file system commands, may have unpredictable results. |
| PJ29561 | 18 | A CTL-4 system error may occur when step-over processing is done and there is no C stack initialized. |
| PJ29562 | 18 | A CTL-1 in COMX/CACHE occurs when a CACHE LOCKED hit is taken. |
| PJ29565 | 18 | Compile error in mail_admin_cmds.c with APAR PJ29502 applied. |
| PJ29568 | 18 | CDRM outstanding pacing response can block defer list. |
| PJ29569 | 19 | With PJ29579 applied, the value of am0cct is not correct on messages received via the TPF MQSeries ROUTC Bridge. |
| PJ29570 | 19 | CTL-2 dumps occur while debugging a selectively activated ECB. |
| PJ29571 | 18 | SNAPC processing code in CPSM activates CPSI when it is not needed. This causes problems in streaming SNAPC situations. |
| PJ29572 | 19 | Improper serialization between path-not-operational recovery and connect path recovery may cause a module-down condition. |
| PJ29573 | 19 | Improve time measurement under VM and shared PR/SM. |
| PJ29575 | 18 | Add a data type that will explicitly represent 32-bit pointers. |
| PJ29576 | 19 | Provide a new API supporting packed decimal data. |
| PJ29577 | 18 | APAR PJ28363 causes a CTL-3 dump when system heap is permanently backed by real memory. |
| PJ29578 | 19 | The TPF FTP control session may be cleaned up by the socket sweeper during large file transfers. |
| PJ29579 | 19 | CTL-03 system error can occur when an APPN BIND command is initiated on an I-stream other than the main I-stream. |
| PJ29581 | 18 | ASMA033I assembler warnings given in IPLB because of HMC support code (APAR PJ28622). |
| PJ29582 | 19 | TPF corequisite APAR for TPFDF FARF6 support. |
| PJ29584 | 18 | With APAR PJ26693 applied, a Session Open request from a MATIP client is rejected by the MATIP server because a MATIP socket in one of the server host records was not cleared from the record after it was closed by MATIP. |
| PJ29585 | 18 | Provide support for EPDC 308. |
| PJ29589 | 19 | A CTL-E07 system error may occur out of CHRY after the EVNTC macro encounters a duplicate event name (OPR-C6202A). |
| PJ29591 | 18 | With APAR PJ28997 applied, ZSOCK IPMT does not default. |
| PJ29592 | 19 | Confusion with VATPF debugger when tracing child ECBs. |
| PJ29593 | 19 | Address requirements on name and location of TPF-unique header files. |
| PJ29594 | 19 | Debugger CTL-4 system error occurs while monitoring the local function. |
| PJ29596 | 19 | With APAR PJ26188 applied, CFIN does not set CINFC tag CMMSHMM address in a non-basic subsystem (non-BSS). |
| PJ29598 | 19 | ZAVSN can override VSN of the online disk when there is a bad IOCP. |
| PJ29599 | 19 | ZDEBE command output of chained messages may cause 'OM' file record errors. |
| PJ29600 | 19 | Provide support for the tpf_read_TCP_message2() and activate_on_receipt_of_TCP_message2() socket APIs. |
| PJ29601 | 19 | With TPF MQSeries APAR PJ25780 applied, a CTL-749 may occur from various ZMQSC channel commands when TPF is running in block check mode. |
| PJ29605 | 19 | Sysplex Timer reported but not found. |
| PJ29606 | 19 | A CTL-2 system error might occur instead of a CTL-6EE or CTL-6ED when the MOVEC macro is given an address that is not valid. |
| PJ29607 | 19 | Application port numbers higher than 32767 do not display correctly in NSD reports. |
| PJ29611 | 19 | With APAR PJ28901 applied, a CTL-1 dump occurs in CCTCP1. |
| PJ29614 | 19 | CTL-10 system error out of CUD1. |
| PJ29615 | 19 | CTL-4 dumps occur while debugging in certain stack transition points. |
| PJ29616 | 19 | A CTL-3 dump may occur if ZRECP PROCEED is entered while ZRECP NOREBUILD is in progress. |
| PJ29617 | 19 | Soft IPL while PRC is on an alternate CRAS set may result in incorrect data being stored in the CRAS table. |
| PJ29618 | 19 | With APAR PJ26707 applied, a CTL-4611 dump may be issued on a ZDLCK DISPLAY MOD command. |
| PJ29623 | 19 | With APAR PJ24609 applied, ECBs exiting because of a CTL-8 system error may contain misleading diagnostic information. |
| PJ29624 | 19 | With APAR PJ28758 applied, trigger information for a local queue may contain unpredictable values after ZMQSC ALTER QLOCAL is entered. |
| PJ29625 | 19 | With APAR PJ28435 applied, TPF MQSeries does not handle mixed case names when processing a ZMQSC DISPLAY command using a wildcard entry. |
| PJ29627 | 19 | A CTL-5A system error may occur on a real-time tape after a temporary error condition occurs where the operation should have been retried without reporting an error. |
| PJ29628 | 19 | DBR exceeds TDCTC limit, causing CTL-4A. |
| PJ29629 | 19 | MPIF restart may hang because ZMPIF DEFINE DEVICE sometimes allows for devices with duplicate SDA ranges to be defined. |
| PJ29630 | 19 | Make the time_t32, size_t32, and ssize_t32 typedefs available. |
| PJ29631 | 19 | lniata.dbg not found by CDBI. |
| PJ29632 | 19 | CTL-3 occurs out of CMN1 on ZMAIL START. |
| PJ29633 | 19 | Segment BPDH incorrectly stores deactivated ID counts. |
| PJ29634 | 19 | With APAR PJ28422 applied, the ZTTCP ACT ALL command could fail to activate all of the CDLC links defined. |
| PJ29635 | 19 | BRV0 pseudo directory initialization may time out without an error message. |
| PJ29636 | 19 | With APAR PJ29062 applied, a CTL-749 dump may occur from CNAB when deactivating a processor with block checking mode on; and with APAR PJ29437 applied, a CTL-10 dump from CUIU may occur during processor deactivation or when a message is rolled back from a processor-shared queue. |
| PJ29637 | 19 | With APAR PJ29313 applied, ZLAEC ALL may not clear the line and TI error counts correctly. |
| PJ29638 | 19 | User-defined TCP delayed ACK timer. |
| PJ29639 | 18 | Copy segment CAPT40 needs to be updated to specify PUT 18 as PUT level. |
| PJ29640 | 19 | This APAR creates new assembler macros to process C/C++ library functions. |
| PJ29642 | 19 | With APAR PJ26707 applied, a CTL-0006C2 catastrophic system error may occur on Move Lock operations using a coupling facility (CF). |
| PJ29649 | 19 | With APAR PJ29513 applied, the TPF system may encounter OPR-I0045F dumps. This APAR corrects APAR PJ29513. |
| PJ29650 | 19 | When GETFC has forced an implied wait, the VCT list is not serviced. |
| PJ29652 | 19 | ZTPSW following the reactivation of a tape control unit or switch can cause the tape queue to hang. |
| PJ29657 | 19 | Loss of ESS cluster results in CTL-700 system error. |
| PJ29658 | 19 | With APAR PJ25780 applied, if the TPF system is below the CREMC shutdown level, an ECB can be suspended with an MQSeries transmission queue locked, eventually causing a CTL-C117 or CTL-000C system error. |
| PJ29659 | 19 | With APAR PJ29437 applied, a CTL-3 system error dump out of CMQM (TPF MQSeries log processing) may result in an aborted TPF restart or aborted ZPSMS processor deactivation. |
| PJ29660 | 19 | A CTL-572/573 system error dump may occur during ZMCFT ENABLE processing. |
| PJ29661 | 19 | A CTL-061 system error dump occurs when there is no program in nesting to return to. |
| PJ29662 | 20 | A CTL-704 may occur after subsequent FINSCs with record ID zero interspersed with other processing for the same file address. |
| PJ29669 | 19 | A CTL-63 may occur for CYED when IPLing the BSS from the prime mod and a subsystem from the LGF. |
| PJ29673 | 19 | With APAR PJ26161 applied, control and data blocks for various MATIP session types are not processed correctly. |
| PJ29674 | 19 | Excessive ALDR run time with >32 768 programs. |
| PJ29675 | 19 | TPF command interface support for ESS copy services. |
| PJ29676 | 19 | With OSA-Express polling enhancement applied (APAR PJ28064), locking problems can occur in TPF clock processing. |
| PJ29677 | 18 | After applying TPF APAR PJ29285 and TPFDF APAR PQ75887, assembler errors may occur because the LLRFOUND symbol is not defined. The updates to the TPFDF SPMs in the TPF product for TPFDF large logical record (LLR) support (PQ75887) are missing from TPF APAR PJ29285. |
| PJ29679 | 19 | Possible data corruption in CTSC caused by APAR PJ28901 and in CTTO by APAR PJ28659. |
| PJ29681 | 19 | Change user exit interface. |
| PJ29684 | 18 | Fix SIP/Code integration problems with APARs PJ29430 and PJ29585. |
| PJ29689 | 19 | With APAR PJ25094 applied, possible CTL-38 dumps may occur because of a redrive of non-hold IOBs with a cached unlock. |
| PJ29690 | 19 | A CTL-3 dump from segment CACA may result from the ZBUFC FILE ALL command. |
| PJ29691 | 19 | Backward fit future source for the single-source feature. |
| PJ29692 | 19 | This APAR provides two assembler macros to set up the compiler interface between an assembler program and a C/C++ function being called by the assembler program. |
| PJ29693 | 19 | ZACRS FBK PRC from the 3270 PRC during restart causes PRC to hang with message "TPF CANNOT ACCESS SMP*." |
| PJ29695 | 19 | Routine CPMTASD corrupts the CPU loop switch base. |
| PJ29696 | 19 | CTL-8 system error occurs on CYPE when ZMCPY PAUSE is entered during copy start. |
| PJ29698 | 19 | Improve the performance of TPFDF CEP processing. |
| PJ29700 | 19 | SYSLIN statements for compiles of CGSTDC, UGSTDC, and USOTDC should specify the member name or else the PDS could be turned into a sequential data set. |
| PJ29702 | 19 | Error message IPLA0055W always is displayed when IPLing from the loader general file. |
| PJ29704 | 19 | With APAR PJ28808 applied, ZRPDU CREATE and ZDUPD S incorrectly have a higher priority than work from the network. |
| PJ29708 | 19 | With APAR PJ28622 applied in a 3270 local console environment, attempts to manually replace the PRC back to line 01 erroneously results in error "ACRS0070E REP CONSOLE TYPE DISAGREES WITH CONFIGURED TYPE." |
| PJ29709 | 19 | CE3PAT always points to the base version of CPA0 during CPA0 termination. |
| PJ29710 | 19 | CTL-4611 dumps may needlessly occur during LEMIC processing. |
| PJ29711 | 19 | With APAR PJ25781, CF operations may not be restarted correctly. |
| PJ29713 | 19 | Enhance the user exit code in CF locking support. |
| PJ29716 | 19 | With APAR PJ29024 applied, the tourc() tape function is mapped incorrectly to the tape_read() function. When a call is made to the tourc() function, an OPR-I000074 dump occurs. |
| PJ29718 | 19 | A SNAP-63 dump may occur on a ZCFLK MIGRATE. |
| PJ29719 | 19 | As a result of APAR PJ21907, C stack corruption may cause CPSE to corrupt the control program and, eventually, cause a CTL-1 dump. |
| PJ29721 | 19 | A CTL-1 may occur during coupling facility request processing. |
| PJ29725 | 19 | TPFAR may cause an infinite loop of dumps in crea.c. |
| PJ29727 | 19 | TPFSYM returns SYSADATA FILE POSITION ERROR when processing DC with 0 duplication. |
| PJ29728 | 19 | CTL-1 catastrophic dump occurs when using the performance analyzer. |
| PJ29729 | 19 | CTL-4 corrupts CE1PBI. |
| PJ29730 | 19 | ZAUTH processor rejects a valid application name if it is the last entry in the Application Name Table. |
| PJ29732 | 19 | OPR-I007544 dump from CSI3 can occur if certain keys are pressed on a 3270 terminal. |
| PJ29735 | 19 | Offline multiple releases are not being calculated correctly. |
| PJ29736 | 19 | ZFCAP SEXPT command processing needs better throttling to improve its performance. |
| PJ29738 | 19 | ZCFLK DISPLAY and ZCFLK MIGRATE command processing incorrectly counts the number of DASDs associated with a Coupling Facility (CF), leading to incorrect output displays or catastrophic system errors. |
| PJ29742 | 19 | TMSLC segment CTMS performs TSNT (Time Slice Name Table) rebuild incorrectly. |
| PJ29750 | 19 | Enhancement to TPF MQSeries local queue manager support to minimize I/O operations for nonpersistent messages on memory queues. |
| PJ29751 | 19 | After a ZFRST RESTART command was issued because a mod timed out, individual processors will report that a restore has been completed, but the entire restore will never end and some mods are never restored |
| PJ29752 | 19 | With APAR PJ25981 applied, debugger ECBs do not get formatted correctly in the dumps. |
| PJ29753 | 19 | TFTP SNAPs occur on the first file transfer. |
| PJ29754 | 19 | After applying APAR PJ29062, an MQGET function specifying the MQGMO_WAIT option may not return immediately when a message is added to the queue. A CTL-10 system error also may occur if separate applications are specifying MQGMO_WAIT, as well as MQMO_NONE and either MQMO_MATCH_MSG_ID or MQMO_MATCH_CORREL_ID, or both. |
| PJ29755 | 19 | Various TPF Internet Mail Server fixes. |
| PJ29756 | 19 | Add support for 3590-E, 3590-H, 3592 tape devices, and 3490 emulation on 3590 devices. |
| PJ29757 | 19 | APAR PJ29083 failed to list the CFID DLM in the APAR as needing to be link-edited. |
| PJ29758 | 19 | Entering ZACRS FBK PRC on a 3270 console system has the rare chance of causing a CTL-38 dump. |
| PJ29763 | 19 | With APAR PJ28422 applied, the ZTTCP ACT IP command could fail to activate all of the CDLC links defined. |
| PJ29764 | 19 | Global record timeout causes FACE error. |
| PJ29766 | 19 | FMTR fails to format all cylinders on a 3390 DASD running in 3380 emulation mode. |
| PJ29767 | 19 | ECBs hang after multi-mod copy completion because of IOBs left on the delay queue. |
| PJ29768 | 19 | CTL-10 dump occurs from CVIT because multiple ECBs are sending chained messages during in-core pool directory recycling. |
| PJ29770 | 19 | cctcp1 ctl-1 |
| PJ29776 | 19 | Support as many as 32,760 cylinders on a 3390 DASD volume. |
| PJ29779 | 19 | Compiler warning may occur when using the i$shm.h header in a C++ program. |
| PJ29780 | 19 | CTL-2E dump can occur out of CMN3. |
| PJ29781 | 19 | Dump processing may get hung when dumping static storage because CPSL is not using the bad ISO-C indicator set up by CPSE. |
| PJ29782 | 19 | This APAR provides support for the alloca() function on TPF. |
| PJ29784 | 19 | CTL-C dumps or other unpredictable results may occur when starting MQSeries queue manager for the first time after applying APAR PJ28136. CTL-C dumps also may occur on ZMQSC MIGRATE BEGIN, COMMIT, or FALLBACK when using PJ27023, PJ27858, or both. |
| PJ29785 | 19 | Lock contention notification processing when requesting locks that reside on the Coupling Facility may result in various system errors, including CTL-4627, CTL-4623, CTL-4604, or CTL-462B. |
| PJ29786 | 19 | With APAR PJ25589 applied, an OPR-7704 dump occurs because of a bad client socket. |
| PJ29788 | 19 | Storage map view dumps or hangs when monitoring large amounts of storage. |
| PJ29789 | 19 | With APARs PJ29716 and PJ29024 applied, TPF MQSeries trace functions and TPF Data Collection fail with OPR-I00074 errors. |
| PJ29790 | 19 | During TPF 4.1 SIP, an RC=4 occurred in ccenbk.asm. |
| PJ29792 | 19 | Correct the code that extends past column 72. |
| PJ29793 | 19 | Obsolete SERRC macro calls. |
| PJ29794 | 19 | CTL-2 out of CCTAPE following completion of Read Opposite Recovery due to a bad base register |
| PJ29795 | 19 | Debugger may not recognize that a C++ DLM segment has test hooks. |
| PJ29796 | 19 | Update the debugger connection to use the "connect" API as the source of the local IP address to resolve firewall/routing issues. |
| PJ29798 | 19 | Missing parentheses in SPPGML in checks for XHA2, XHA3, and XHA4 cause these programs to be included in a base-only SIP. |
| PJ29801 | 19 | TPF TCP/IP connect fails when the socket is bound to a local port, but not a local IP address. |
| PJ29803 | 19 | System outage due to loss of frames during ESS FlashCopy. |
| PJ29804 | 19 | CTL-6D9 dump and hung ECBs occur when writing to the recovery log. |
| PJ29807 | 19 | Correct the FACS error path to issue a POSTC so the parent ECB does not time out and replace the CY2PCT pool count field with CY2XPCT. |
| PJ29808 | 19 | Update traffic limiting counters when using activate_on_receipt_of_TCP_message() and activate_on_receipt_of_TCP_message2(). |
| PJ29809 | 19 | With APAR PJ29192 applied, stopping active TPF MQSeries RCVR and SVRCONN channels may result in a CTL-75. |
| PJ29811 | 19 | Continuous Data Collection may cause a CTL-10. |
| PJ29817 | 19 | Fix various performance issues with the debugger for large C/C++ programs. |
| PJ29818 | 19 | Sequence number problems can occur when using 3600 sessions in output message transmitter (OMT) processing. |
| PJ29819 | 19 | Correct a CTL-4 error that may occur when debugging a 24-bit file resident program. |
| PJ29820 | 19 | ZIDOT DISP OVER processing may give incorrect results because fields are cleared incorrectly in CVZL. |
| PJ29822 | 19 | gethostbyname should accept NULL arg without dumping. |
| PJ29823 | 19 | TPFDF education segments should not be included as part of SIP processing. |
| PJ29826 | 19 | Looping CTL-4 dumps may occur if the macro trace header fields in page 3 of the ECB are corrupted and dumps are turned off. |
| PJ29828 | 19 | Unnecessary unlkc and maskc macro calls at the beginning of getservbyname and getservbyport may cause a CTL-3 when TPF is running without TCP/IP native stack. |
| PJ29829 | 19 | CTL-3 in CTFF |
| PJ29830 | 19 | With APAR PJ29437 applied, a blank screen may be displayed when entering the ZMQSC DISPLAY QL command from a remote 3270 terminal. |
| PJ29832 | 19 | Create a user option to allow the TCP push (PSH) flag to only be set in last TCP packet of a message. |
| PJ29833 | 19 | With APAR PJ27023 applied, the ZMQSC DISP QL command may show negative counts. |
| PJ29834 | 19 | Relocate subroutines in IPLB to provide addressability. |
| PJ29839 | 19 | TPF erroneously builds an EREP OBR for channel errors. |
| PJ29844 | 19 | Allow the debugger to allocate heap storage beyond the MMHS parameter setting. |
| PJ29845 | 20 | CTL-C system error may occur during Assigned-Elsewhere recovery |
| PJ29847 | 19 | With APAR PJ26161 applied, a CTL-4 system error and system heap corruption occurs during MATIP processing. |
| PJ29848 | 19 | With APAR PJ26161 applied, a CTL-3 system error can occur if MATIP receives fewer than 4 bytes on an activate_on_receipt_with_length () function. |
| PJ29849 | 19 | Add HFP to BFP conversion functions. |
| PJ29850 | 19 | A corequisite TPF APAR is needed for TPFDF APAR PQ85997 to allow TPFDF to call TPF segment B1AF instead of function VFile_Keypoint in segment BGAJ to checkpoint the recoup keypoint. |
| PJ29851 | 19 | Activation of the OSA-Express connection could fail when the port name defined is less than 8 characters. |
| PJ29855 | 19 | CIO may incorrectly present an asynchronous interrupt as a synchronous interrupt, causing a CTL-38 system error or other unexpected I/O errors. |
| PJ29856 | 19 | Enhancement to enable the KEEPALIVE option of TCP/IP native stack sockets used by MQSeries sender channels. |
| PJ29858 | 19 | Snap-I000ADB05 can occur while tracing a TPFDF dump. |
| PJ29863 | 19 | OPR-I0210F1 occurs from WGRA after APAR PJ29216 is applied. This APAR corrects APAR PJ29216. |
| PJ29864 | 19 | Incorrect USING statement causes a bad branch and a CTL-2 dump. |
| PJ29865 | 19 | Some SIP instructions need to be added to spcomp.mac to complete APAR PJ29593. |
| PJ29867 | 19 | A program check in cccpse may force the system to re-IPL when dumping corrupted data event control blocks (DECBs). This problem was caused by APAR PJ27393. |
| PJ29870 | 19 | System hangs during restart in log recovery. |
| PJ29871 | 19 | With APAR PJ28649 applied and the ISO-C user exit code enabled, the fast link stack may get corrupted resulting in CTL-1 and CTL-4 system errors. |
| PJ29874 | 19 | ZDFIL using MCHR format does not work when the requested module is down. |
| PJ29876 | 19 | Return code 4 from prelinker for modules CUDABS40 and CUD2BS40. |
| PJ29881 | 19 | Modify ZFILE tail command to eliminate possible CTL-75 dumps and make more efficient use of memory. |
| PJ29883 | 19 | Extraneous semicolon in TPF Mail code. |
| PJ29884 | 19 | With APAR PJ28435, the TPF MQSeries Channel Security exit for SVRCONN channels is not operational. |
| PJ29885 | 19 | With APAR PJ27785 applied, a ZMCPY command may take a CTL-4 in CLME during start processing because of a processor timeout. |
| PJ29886 | 19 | Handling of returned TOD SYNC IPC messages is not correct. |
| PJ29888 | 19 | Recoup may report lost addresses incorrectly. |
| PJ29889 | 19 | With PJ28836 applied, ECBs activated via FMMR sessions may not send correct notification to the originator when they are exited because of a system error. |
| PJ29890 | 19 | Enhance CTL-700 catastrophic dump appended message. |
| PJ29891 | 19 | VisualAge debugger tracing of an unallocated program causes a loop. |
| PJ29894 | 19 | CTL-38 dumps may occur when IPLing a processor that was force deactivated but failed because CTKI retrieval timed out. |
| PJ29895 | 19 | Debugger front end hangs when using storage mapping. |
| PJ29897 | 19 | CTL-C dump may occur in segment BKC1 during Recoup Phase 5. |
| PJ29900 | 19 | CTL-4 dump can occur out of CVAA if a large command is entered from the console. |
| PJ29901 | 19 | Correct CTL-3 condition in CMN3. |
| PJ29902 | 19 | With APAR PJ29328 applied, incorrect comparisons are made in CLM2 and CSS6 for SSTHCLK. |
| PJ29905 | 19 | With APAR PJ28789 applied, CK9KC may not assemble with suffixes. |
| PJ29906 | 19 | Fix TPF Mail Server password encryption. |
| PJ29909 | 19 | Fix missing ICMP messages because of incorrect flag criteria check. |
| PJ29911 | 19 | If the TAPEQ and ICFLP macros are coded in the same program, assembly errors will occur. |
| PJ29912 | 19 | Enhancement to allow the CPRND macro to round to a 4-K boundary instead of a 256-byte boundary. |
| PJ29915 | 19 | Fix online recoup user exit at the end of recoup phase one. |
| PJ29917 | 19 | Provide a facility to prevent TPF MQSeries Queue Manager from being started automatically on cycle-up to NORM state. Also, in a loosely coupled complex, entering ZMQSC START/STOP QMGR on one processor may accidentally affect whether Queue Manager is started automatically on other processors in the complex on cycle-up. |
| PJ29918 | 19 | With APAR PJ29062 applied, an MQGET with a GMO Version 1 may search the queue when it should not, or it may fail with an options error. Additionally, Java-based MQSeries clients fail to connect to TPF MQSeries. |
| PJ29919 | 19 | With APAR PJ25880 applied, an erroneous OPR-I00C207 error may occur out of program CUPH. |
| PJ29920 | 19 | With APAR PJ27023 applied, a CTL-C117 catastrophic error may occur if the sender channel is locked for sending a large batch or sending a consistent stream of nonpersistent messages. A sequence number error may occur across an IPL for receiver channels. Checkpoint may cause unnecessary log usage when there is no MQSeries activity; and checkpoint time stamps need higher granularity for debugging purposes. |
| PJ29921 | 19 | The gethostbyname() API does not return any information if the response is not from the authoritative DNS server. |
| PJ29925 | 19 | Enhancements to TPF Continuous Data Collection (CDC). |
| PJ29926 | 19 | Add SPPGML changes for APAR PJ29849. |
| PJ29928 | 19 | A FILUC of a delayed file record when a DECB is used may not be handled correctly. |
| PJ29929 | 19 | With PJ29447 applied, TPF may inadvertently assume that the remote has reduced the size of the TCP send window. |
| PJ29930 | 19 | Enhancement to support the 10 GbE OSA-Express adapters. |
| PJ29931 | 19 | With APAR PJ29638 applied, a possible CTL-2 system error can occur when out of order data is received. |
| PJ29933 | 19 | Multiple DYDO0004I messages are displayed by the ZDUPD E command and ZDUPD S xx may log more than xx releases. |
| PJ29935 | 19 | Add TPF MQSeries MQINQ support for processes. |
| PJ29936 | 19 | With APAR PJ27530 applied, system error processing will lose frames when dumping the TPFDF swap area. |
| PJ29937 | 19 | Move the gettimeofday prototype into sys/time.h |
| PJ29938 | 20 | TPF MQSeries channel status display needs the socket descriptor. |
| PJ29939 | 19 | An RECP0000T (IN CORE DIRECTORY CAPTURE TIME-OUT ON PROCESSOR) error may occur at the end of TPFDF recoup phase 1 when TPFDF is paused during the last record processed. |
| PJ29940 | 19 | ECB hangs in CTS2 when issuing a connect() API and the link associated with the socket is not active. |
| PJ29941 | 19 | Cycle to NORM will leave the TPF system running in uniprocessor mode if record logging is active and all the necessary logging tapes are not mounted. |
| PJ29942 | 20 | CTL-51 on restore of logging or execption record tapes. |
| PJ29944 | 19 | An OPR-I00C130 dump can occur in cl31 when a large amount of data needs to be recovered by the DASD resource manager (RM). |
| PJ29945 | 19 | Streaming CJIW0007W messages caused system outage. |
| PJ29946 | 19 | With APAR PJ28901 applied, an OPR-7704 dump can occur when BACKLOG is exceeded. |
| PJ29947 | 19 | ZXCPY FREEZE function of APAR PJ29675 can hang during periods of high I/O activity. |
| PJ29948 | 19 | Identify ADCONs by using TLDR. |
| PJ29949 | 19 | Verify all processors are active before copy end of job to prevent complex outage. |
| PJ29950 | 19 | DASD Channel Errors may be reported during 3270 Console automatic fallback processing. |
| PJ29951 | 20 | CTL-10 system errors may occur when a locate is received for a new LU 6.2 session. |
| PJ29952 | 19 | APAR PJ28765 causes CTL-4 and CTL-3 dumps (the exec() function). |
| PJ29953 | 19 | Enhancements to APAR PJ29729. |
| PJ29955 | 19 | The rate that TPF file system directory cache is accessed during ECB initialization of standard streams may cause a CTL-C "OUT OF 4K FRAMES" system error. |
| PJ29957 | 19 | This is a single-source APAR to backfit time zone (TZ) environment variable support from the next release back to TPF 4.1. |
| PJ29958 | 19 | Recoup statistics cannot distinguish between different runs. |
| PJ29960 | 19 | XML PARSER CTL-4 IN CXML40. |
| PJ29961 | 19 | ONCODE=310 Fixed overflow in JRF4 when TCP/IP message counter wraps |
| PJ29962 | 19 | With DECB support (APAR PJ27393) applied, a CTL-1, CTL-2, CTL-3, or CTL-4 system error may occur during EXITC processing if a DECB frame has been corrupted. |
| PJ29963 | 21 | TPF support for the z/OS 1.8 compiler
|
| PJ29967 | 19 | With APAR PJ27830 applied, starting an active TPF MQSeries Sender channel may result in one or more CTL-3 and CTL-4 errors, and core corruption. |
| PJ29968 | 19 | With APAR PJ29062 applied, if multiple ECBs specify MQGMO_WAIT and MQMO_MATCH_* at the same time, a CTL-6D9 or CTL-4 system error can occur. |
| PJ29969 | 19 | New SREGSC application macro and new functions on the PNAMC macro. |
| PJ29970 | 20 | FC18 records may not be recouped correctly if the owning data store attribute is DELETE-IMMEDIATE. |
| PJ29971 | 20 | Initializing the RCB for AX.25 device types may result in an OPR-473 system error. |
| PJ29974 | 19 | Error trapping method for LOG() function. |
| PJ29975 | 19 | A long dump may occur because of corrupted C static storage. |
| PJ29977 | 19 | With APAR PJ29900 applied, prefixed commands may be rejected. This APAR corrects APAR PJ29900. |
| PJ29978 | 19 | IP fragment Denial of Service (DoS) Attack Prevention and user-defined duplicate ACK counter to trigger fast retransmit processing. |
| PJ29979 | 19 | Fix expansion of expression for subrange. |
| PJ29980 | 19 | Single source APAR to backfit HFP and BFP conversion. |
| PJ29981 | 19 | Assembler expressions restore from debug profile as deferred. |
| PJ29982 | 19 | Correct/Clarify PUT 17 Debugger Message EQA2015E. |
| PJ29984 | 19 | Move related BSD select definitions to sys/time.h. |
| PJ29985 | 19 | A CTL-571 system error may occur when a ZNDYN RECYCLE command is entered. |
| PJ29987 | 19 | With IP over CDLC support not defined, a CTL-1 can occur while searching the IP Routing Table. |
| PJ29988 | 19 | CTL-38 caused by PPRC spare module handling introduced by APAR PJ29675. |
| PJ29989 | 20 | With PJ29675, there is no way to detect PPRC path failures. |
| PJ29990 | 19 | CTL-3 out of CXCV when defining more than 200 PPRC paths with PJ29675 applied. |
| PJ29995 | 19 | With APAR PJ27230 applied, TPF MQSeries Client using MQGET with a WaitInterval greater than 5 seconds will fail with reason code 2009 (MQRC_BROKEN_CONNECTION). |
| PJ29996 | 19 | With APAR PJ29675 applied, a CTL-6E3 error and FINWC loop can occur during ZXCFG CON RECEIVE processing. |
| PJ29997 | 19 | With APAR PJ28712 applied, a failing module can be retried indefinitely. |
| PJ29999 | 19 | CINET4 CTL-572 dump for AOA process model from APAR PJ28496. |
| PJ30002 | 20 | Extraneous data added in PIU trace entry if the combined Transmission Header(TH) and Request Header(RH) cross a 4K boundary. |
| PJ30003 | 19 | Allow 4D6 pool fallback to 4LT. |
| PJ30004 | 19 | TPFDF recoup RCI processing does not work correctly. |
| PJ30006 | 19 | A CTL-66D can occur during restart in segment CNPU. |
| PJ30007 | 19 | Add recoup keypoint validation check to BREP. |
| PJ30010 | 19 | CTL-2010 occurs during PDU processing. |
| PJ30011 | 20 | The copy services SPE, APAR PJ29675, used illegal record IDs for the copy relationship database anchors and pool chains. |
| PJ30013 | 19 | Enhancement to issue PTLB after the OMD user exit is called. |
| PJ30014 | 19 | Timeout error count field BK0ARC is not accurate during ZRECP SEL processing. |
| PJ30015 | 19 | Correct the ability to specify a fourth port in offline trace. |
| PJ30018 | 19 | With APAR PJ29229 applied, ZCORO INIT PROC command processing does not accept a numeric processor ID. |
| PJ30021 | 20 | With APAR PJ29675 applied, ZXCPY REMOTE SESSION STATUS may display incorrect path status and displays multiple, incorrect consistency group status messages. |
| PJ30022 | 19 | With APAR PJ29675 applied, ZXCPY START PATH command is rejected with XCPY0069E when source and target SDAs match. |
| PJ30023 | 19 | APAR PJ29675 introduced the potential to incur a CTL-4 system error from Copy Services segment CXCQ. This would happen during restart when a remote copy had been executed previously. |
| PJ30024 | 19 | Provide Translation of ASCII DATA for IP Trace |
| PJ30025 | 19 | Add relayhost support to the TPF Internet Mail Server. |
| PJ30026 | 19 | ZPSMS PR FORCE DEACT processing may hold keypoint record I (CTKI) too long and cause system outage. |
| PJ30027 | 19 | Correct documentation for offline IP trace FILE parameter. |
| PJ30028 | 19 | CTL-4 dump from CDB2 when debugging objects with no functions. |
| PJ30030 | 19 | In a loosely coupled complex, an incorrect tape address can allow for exception recording to start, but not capture. |
| PJ30031 | 19 | CTL-1 error may occur if a system error occurs following debugger termination. |
| PJ30032 | 19 | IMAP getquotaroot command does not return OK response. |
| PJ30035 | 20 | Status display enhancements for ESS Copy Services (ZXCPY) and corrections to error messages XCPY0019E, XCPY0004E, and XCPY0005E. |
| PJ30036 | 19 | Fix possible CTL-3 caused by APAR PJ28586 because of incorrect updating of user storage pointed to by the gethostbyname argument. |
| PJ30039 | 21 | TPF Debugger C/C++ parser and Global Expression updates. |
| PJ30040 | 19 | With APAR PJ28789 applied, a CTL-704 catastrophic condition may occur. |
| PJ30041 | 19 | SOAP APIs cannot be called from C++. |
| PJ30042 | 20 | CTL-C catastrophic system errors may occur when activating or deactivating SNA sessions. |
| PJ30043 | 19 | Order incorrect in ZDECB OLD display. |
| PJ30044 | 19 | Make VFA delay filing active in CRAS state and above. |
| PJ30047 | 19 | Default constructors cause loading of debugging information to fail. |
| PJ30048 | 19 | With APAR PJ27830 applied, the socket buffer size of the channel definition cannot be set to the default by TCP/IP; also, when CPU-ALL is specified in a ZMQSC ALTER CHL or ZMQSC DELETE CHL command, an MQSC0007E error may occur and the channel may not be altered or deleted from all processors. |
| PJ30049 | 19 | With APAR PJ28435 applied, a CTL-E06 from CUSC may occur when ZMQSC STOP QMGR is entered. |
| PJ30050 | 19 | CTL-54 could occur in an LC environment if two ECBs from two different I-streams are trying to open the RCP tape at the same time. |
| PJ30051 | 20 | Possible network services database (NSD) corruption if the issuing API was tpf_read_TCP_message2(). |
| PJ30054 | 19 | CTMT and CTMS incorrectly check return code from FACE. |
| PJ30055 | 19 | When aborting PDU create, ZRPDU ABORT fails to set the PDU indicator in C50STA to inactive. |
| PJ30056 | 19 | CTL-4 dump in CFAI. |
| PJ30057 | 20 | An OPR-200DC dump may occur when trying to delete files or remove large directories. |
| PJ30059 | 19 | Lock management STACK macro may not work correctly. |
| PJ30060 | 19 | TPFDF PACKINHI candidate records are not packed after the selective recoup of a TPF record. |
| PJ30061 | 19 | Build of ctie.c and csf4.c resulted in a warning message. |
| PJ30062 | 20 | An OMT output message sequence number problem can cause sense 2001 duplicate output message sequence number errors. |
| PJ30064 | 19 | CTL-3 in CUD1 occurs with many functions in the program. |
| PJ30066 | 19 | Breakpoints are not restored from profile in source compiled in a PDS. |
| PJ30067 | 19 | 3270 console fallback (both manual and automatic) may fail with a 2074-type control unit. |
| PJ30069 | 19 | With APAR PJ29921 applied, gethostbyaddr lookup cache hit may get a CTL-3 dump. |
| PJ30070 | 19 | MPIF may return a lost interrupt using FICON CTC to a deactivated LPAR. |
| PJ30071 | 19 | ZACRS fallback in NORM state for 3215 may hang. |
| PJ30072 | 19 | connect() or bind() may return an incorrect port number (>5000) or take a CTL-4 dump when looking for the next available port number. |
| PJ30074 | 20 | A FOUND GDS should be sent when sending a negative LOCATE response if the logical unit (LU) is valid on TPF. |
| PJ30078 | 19 | Correct a CTL-21 during a pool reallocation run. |
| PJ30079 | 19 | A CTL-1 system error occurs out of copy segment CRMR in CSECT CCCCP5 when CRMR attempts to increment the bytes received data collection counter for a BSC station. |
| PJ30080 | 20 | Incorrect job numbering in SIP Stage II caused by APAR PJ29089. |
| PJ30081 | 19 | Long-term pool reorder does not set the reorder-in-progress (CY1REO) bit in keypoint 9 correctly. |
| PJ30084 | 19 | APAR PJ29780 was removed accidentally by APAR PJ29440. |
| PJ30085 | 19 | After APAR PJ29573 is installed, a CTL-1 system error is taken when issuing a ZATIM command. |
| PJ30086 | 19 | The CINFC macro corrupts the short-term record base registers, causing random data to be used for short-term directory time stamps. |
| PJ30088 | 19 | With APAR PJ21791 applied, a CTL-572 system error occurs when a close() of a socket on one I-stream occurs as a select() is being issued for that socket on a different I-stream. |
| PJ30089 | 19 | Single source support for CSONC error parameter. |
| PJ30091 | 19 | Internet daemon socket user exit enhancement. |
| PJ30092 | 19 | CTL-000696 used inappropriately |
| PJ30093 | 19 | Address breakpoints do not correctly restore from profile. |
| PJ30094 | 20 | Three issues negatively impact the performance of the ESS Copy Services monitor (CXCS). It is possible for the Copy Services monitor to run on a processor other than the one that owns the Copy Services utility. Path failure may cause the monitor program to exit and false status to be reported. Keypoint data may be lost if the system is IPLed during the monitor’s initial start-up delay. |
| PJ30097 | 19 | CTL-4 from CDM2 when starting the debugger with an inactive loaded version of CUDA. |
| PJ30100 | 19 | Database corruption may occur for records using processor locking when using ZMCPY UP. |
| PJ30102 | 20 | Add the ability to clean up a TCP connection during VIPA MOVE processing. |
| PJ30103 | 19 | Avoid closing the listener socket when the number of connections reaches the MAXPROC limit. |
| PJ30105 | 20 | Message XCPY0039E is issued with an incorrect serial number and LSS ordinal. |
| PJ30106 | 20 | With APAR PJ27023 applied, an MQSeries deadly embrace condition may cause a catastrophic CTL-C or a catastrophic CTL-C11C with streaming MQSC0249W - TPF MQSERIES CHECKPOINT HAS EXCEEDED MAX COMPLETION TIME warning messages if a TPF MQSeries message is coming across a channel for a queue that does not exist and the dead-letter queue is being swept for the first time. |
| PJ30108 | 20 | With APAR PJ29675 applied, ZXCPY REMOTE SESSION STOP resulted in an event timeout and a CTL-C error. |
| PJ30109 | 19 | CTL-1 from CLYE in CCCCP1 after applying APAR PJ28622. |
| PJ30110 | 19 | Streaming timeouts during TPF to TPFDF crossover recoup. |
| PJ30113 | 19 | With APAR PJ26575 applied, core corruption, a CTL-3, or other unpredictable results may occur when accessing ECB-unique storage areas. |
| PJ30114 | 19 | CTL-1 from POSIX fork() function. |
| PJ30115 | 19 | IPART rebuild takes too long. |
| PJ30116 | 19 | APAR PJ29024 IDECIMA2 INLINE HEADER FILE LRECL GREATER THAN |
| PJ30117 | 20 | Automatic retry of OSA-Express connection activation. |
| PJ30118 | 19 | With APAR PJ30044 applied, delay filing is not deactivated when cycling from NORM or MESW state to 1052 state. |
| PJ30119 | 19 | APAR PJ29657 does not work in an MDBF environment. |
| PJ30120 | 20 | MCPY0208T may cause module file status table (MFST) corruption leading to a CTL-C error. |
| PJ30121 | 23 | In the TPF Debugger, monitored assembler DSECTs can become "Not
Allocated" when stepping through assembler applications.
|
| PJ30122 | 19 | During ZPOOL GENERATION CREATE command processing, a CTL-3 may result from a bad branch in the FACS error path. |
| PJ30124 | 19 | The threshold that CPSE uses to switch from using WTOPC to CWRTC is too low. |
| PJ30125 | 19 | Correct CTL-C (Common Blocks) during tape write. |
| PJ30126 | 19 | With APAR PJ29967 applied, a disabled TPF MQSeries RECVR/SVRCONN channel cannot be started. |
| PJ30127 | 19 | Adjust timeout value and turn on or turn off debug trace. |
| PJ30129 | 20 | ZSTIM may create excessive CRETC items. |
| PJ30130 | 20 | With APAR PJ28435 applied, TPF MQSeries channel message exit (MSGEXIT) will fail with messages larger than 32290 bytes. |
| PJ30131 | 20 | Add some new options to offline IP trace. |
| PJ30132 | 19 | OPR-IDB0115 may occur on ZRECP DISPLAY VERIFY command. |
| PJ30133 | 20 | PCI Cryptographic Accelerator (PCICA) support to improve the performance of starting SSL sessions. |
| PJ30134 | 19 | PNL stack frames are not displayed. |
| PJ30135 | 20 | Attempt to file DASD module status change before movelocks execution. |
| PJ30136 | 19 | Correct LREGSC single source macro for LOREG parameter. |
| PJ30137 | 19 | New tape header for CDC data needed. Cannot IPL from LGF. |
| PJ30139 | 19 | System hangs when tracing an exception taken from executing code on stack. |
| PJ30140 | 20 | With PJ29379 applied a CTL-1, CTL-2 or CTL-38s may be issued after a CTL-3A system error. |
| PJ30142 | 19 | Certain Z commands from remote terminals may cause the terminal to hang. |
| PJ30143 | 19 | With APAR PJ30091 applied, a CTL-3 may occur when INETD is started. |
| PJ30144 | 19 | With APAR PJ25094, a CTL-704 catastrophic error may occur when issuing multiple FILEC general macros for the same file address when the record is a VFA synchronization immediate candidate and the FILEC macros are issued outside the realm of a suspended commit scope. |
| PJ30145 | 19 | With APAR PJ26858 applied, replies to input messages from ALC terminals are not received by the terminals. |
| PJ30146 | 20 | ZFILE RM -R may not remove all files. |
| PJ30147 | 19 | Recoup should process only active SSUs. |
| PJ30148 | 20 | A CTL-8 or CTL-22 may occur out of CVIQ if a FILNC error occurs. |
| PJ30149 | 19 | To correct APAR PJ29640, change label ICST_WRK in the PRLGC macro from an equate symbol to a DS instruction. |
| PJ30150 | 20 | With APAR PJ29062 applied, an application that disconnects from the TPF MQSeries queue manager and then attempts to close a queue will result in a CTL-I000075 or other CTL dump. |
| PJ30151 | 19 | Assembly errors occur in CCCPSE and STPP after applying APAR PJ28154. |
| PJ30152 | 21 | With PJ25780, TPF Websphere MQ ZMQSC DEL CHL command
incorrectly checks the channel on the active CPU, and not the
intended CPU.
|
| PJ30153 | 19 | With APAR PJ29981 applied, assembler expressions can only be monitored with debug information. |
| PJ30156 | 20 | Support the Central Processor Assist for Cryptographic Function (CPACF) to improve the performance of exchanging SSL session data and provide APIs to encrypt or decrypt user data using CPACF. |
| PJ30157 | 20 | With APAR PJ29675 applied, a CTL-38 can occur when unlocking the SSST header held by the copy services monitor. |
| PJ30158 | 19 | With APAR PJ28789 applied, purging a lock for an inactive processor may not function correctly. |
| PJ30159 | 19 | Crossover recoup does not work with APAR PJ29213 applied. |
| PJ30161 | 19 | With APAR PJ27333 applied, a program check in CCCPSF may occur when SNA is not generated in the system. |
| PJ30162 | 19 | Recoup record ID initialization not completed before chain chasing. |
| PJ30167 | 19 | Possible CTL-1 can occur after implementing APAR PJ29950. |
| PJ30168 | 21 | Support for the IBM System Storage DS6000.
|
| PJ30169 | 19 | With APAR PJ29955 applied, the protect key is not restored correctly when issuing file system APIs and the standard streams may not be opened correctly. |
| PJ30171 | 20 | Copy Services (APAR PJ29675) is logging too frequently, causing log file to wrap. |
| PJ30172 | 19 | CAPT needs to be updated to specify PUT 19 as the PUT level. |
| PJ30176 | 20 | APAR PJ28626 may cause a CTL-10 or system hang during recoup phase 3. |
| PJ30177 | 19 | A 3270 local terminal may hang after an unsolicited message has been sent when the terminal is not active. This problem was introduced by APAR PJ29381. |
| PJ30178 | 19 | DEBUGGER CTL-3 UPON AN APPLICATION FORK |
| PJ30179 | 19 | The TPF Internet Mail Server mailbox password needs to be folded to lowercase. |
| PJ30182 | 19 | With APAR PJ28789 applied, an unnecessary read message I/O may be issued after a lock granted is simulated. |
| PJ30183 | 19 | TPF recoup changes are required for TPFDF APAR PK01216, which addresses a CTL-4 system error that occurs during ZRECP STA VAL processing when an 8-byte file address is specified. |
| PJ30184 | 19 | With APAR PJ27383 applied, a 6DA dump may occur out of enter/back processing. |
| PJ30185 | 20 | ZNTRP does not accept national characters in the ID name. |
| PJ30186 | 19 | An ASMA102E assembly error may occur when using certain Boolean condensed forms of SPMs. |
| PJ30187 | 19 | With APAR PJ29541 applied, resetting a remote Sender channel results in a TPF MQSeries receiver channel erroneously sending a response that results in a protocol violation. |
| PJ30188 | 20 | Support for PPRC copy services over Fibre Channel Protocol (FCP) links. |
| PJ30189 | 19 | Small enhancement to allow TPFAR applications to use sqlint32 as a data type for SQL host variables (single source APAR). |
| PJ30190 | 20 | The SNAPC EB dumps, which are caused by CKMAC authorization failures, need to be changed to SERRC so that the problems can be solved. |
| PJ30191 | 20 | ZXCFG DEFine parameter handling sometimes is incorrect. |
| PJ30192 | 20 | With APAR PJ28578 applied, TPF MQSeries does not retry transient errors from gethostbyname() |
| PJ30193 | 20 | Correct IRART OPR-412F5 corruption error that may occur during recoup. |
| PJ30194 | 20 | With APAR PJ26693 applied, MATP0033E error message "ERROR LOADING HOST NAME" is displayed during system cycle-up. |
| PJ30195 | 20 | With APAR PJ28758 applied, a SNAP dump CODE-I000000EB, UNAUTHORIZED USE OF MACRO, can occur in TPF MQSeries applications. |
| PJ30198 | 20 | With APAR PJ28435 applied, TPF MQSeries display channel displays only the first 50 characters of the channel description. |
| PJ30201 | 20 | Wrong displacement for recoup abort check. |
| PJ30202 | 19 | Error message IEL0190I E FIXED OVERFLOW may occur during the compilation of JRA1, JRA2, JRA3. |
| PJ30203 | 20 | With APAR PJ29675 applied, the output error message XCFG0041E file address display is incorrect. |
| PJ30204 | 20 | User exit added to BXPC. |
| PJ30206 | 20 | After applying APAR PJ29756, COSB0185E or other tape errors can be seen on a 3490 tape drive after an IPL with an input tape mounted. |
| PJ30209 | 19 | TPF needs to support the z/OS V1R5 compiler. |
| PJ30211 | 19 | Reduce memory usage of merged debugger and fix the disassembly view. |
| PJ30212 | 19 | With APAR PJ29955 applied, a CTL-3 dump in CTKO or a snap-EB dump may occur. |
| PJ30213 | 20 | Lost frames with SETENV. |
| PJ30214 | 20 | WLOGC entry hung in buffer blocked condition. |
| PJ30215 | 20 | When running CDC, another collection can be defined. |
| PJ30216 | 20 | Build script for segment CDCP for CDC does not have the DLM statement before the import statements. |
| PJ30217 | 20 | With APAR PJ29921 applied, an application that calls the gethostbyname() or gethostbyaddr() API may result in a SNAPC-EB dump. |
| PJ30218 | 20 | With PJ24916 applied, a CTL-4A0 dump may occur out of CHDL during CP-CP session activation. |
| PJ30219 | 20 | GENR macro still checks for #IR02DF and #IR03DF. |
| PJ30220 | 20 | Logging restore may file records out of order. |
| PJ30221 | 20 | Unexpected debugger pop-up messages in debug session during an application fork. |
| PJ30222 | 20 | Increase performance of RLOG takeover processing. |
| PJ30223 | 19 | The entry for UF1T in SPPGML is incorrect. |
| PJ30227 | 20 | The ZSTAT display for subsystem counts gives erroneous information for the processed ECB information. |
| PJ30228 | 20 | TCP connection limiting erroneous MAXCONNOUT count. |
| PJ30231 | 20 | When performing recoup, TPF collection support (TPFCS) may cause extended high CPU utilization. |
| PJ30232 | 20 | An OPR-520 system error can occur when activating channel-to-channel (CTC) links. |
| PJ30233 | 20 | CDC support for TPFDF LLR for records greater than 4 K. |
| PJ30234 | 20 | With APAR PJ29600 applied, TCP/IP native stack read() API processing will fail when issued from a subsystem. |
| PJ30235 | 21 | CTL-571 may occur if a device receives an asynchronous interrupt on one
I-stream while that same device is being dummy mounted on another
I-stream.
|
| PJ30236 | 20 | CPA0 OPR-I097450 when analyzing applications with longjmp calls. |
| PJ30240 | 20 | TPF debugger: Unable to trace source with APAR PJ30211. |
| PJ30241 | 20 | A DB0146 system error is incorrectly issued when TXCMC is issued from a TPFDF program without a preceding TXBGC. |
| PJ30242 | 20 | CTL-38 catastrophic caused by undefined MPLF return code. |
| PJ30243 | 20 | Module down conditions cause the copy monitor to abort. |
| PJ30244 | 20 | CTL-3 dump from BCP3 may occur while building the EA/LA reports. |
| PJ30245 | 20 | Correct maximum number of processors. |
| PJ30246 | 20 | TPF Internet Mail Server mail() API cannot accept NULL password field for write option. |
| PJ30247 | 20 | With APAR PJ25780, altering a TPF MQSeries sender channel transmission queue (XMITQ) when that XMITQ has previously been used by a different channel results in error message MQSC0357E. |
| PJ30248 | 20 | ZRECP REBUILD has conflicting use of BL0ECB control field |
| PJ30249 | 20 | With APAR PJ28587 applied, a reset (RST) received for a connection request (SYN) may be inadvertently discarded. |
| PJ30251 | 20 | With APAR PJ29925 applied, CDC can not be configured to run with multiple processors in a loosely coupled complex. |
| PJ30252 | 20 | ZSTIM table corruption can cause a system hang condition. |
| PJ30253 | 20 | With APAR PJ29925 applied, CDCP takes a CTL-E1 when cycling down from NORM state to 1052 state. |
| PJ30254 | 20 | With APAR PJ29776 applied, a CTL-4 may occur in the file collector in CDC1 after a tape write. |
| PJ30255 | 20 | With APAR PJ29758 applied, TPF MQSeries unsweep fails to update the sweep timer. |
| PJ30256 | 20 | With APAR PJ29436 applied, a TCP/IP AOR application length error occurred. |
| PJ30258 | 20 | Copy Services (APAR PJ29675) should minimize disk mounts of spare devices to reduce module queue and record hold table contention; and the monitor ECB should exit when inactive to allow ZPSMS PROC DEAC processing to be completed. |
| PJ30259 | 20 | Various TPF Internet mail server regression test fixes. |
| PJ30260 | 20 | A CTL-3 results during TPFDF application processing on a subsystem (SS) when running TPFDF data collection on the basic subsystem (BSS). |
| PJ30261 | 20 | Streaming SIM messages could cause an outage. |
| PJ30262 | 20 | With APAR PJ29447 applied, the IP socket does not send data when SYN is lost. |
| PJ30263 | 20 | FITS MR0326046233: DO NOT POST CERTAIN OPR-7777'S |
| PJ30264 | 20 | Commands entered from a 3270 console that contain carriage returns may be rejected by the TPF system. |
| PJ30266 | 20 | Pool Reallocation doesn't preserve Ratio Dispensing |
| PJ30267 | 20 | ZMPIF DELETE DEVICE command may cause MPIF to lose information about address ranges. |
| PJ30272 | 20 | Recoup chain chase was not updated to recognize new Super GOA fields introduced by APAR PJ27785. |
| PJ30273 | 20 | APPN FTPI session fails with sense code of 20110001 (pacing protocol error) due to TPF sending multiple pacing responses to a single pacing request. |
| PJ30274 | 20 | ZDMAP XXXX O-OBJECTNAME DOES NOT SUPPORT LOWERCASE. |
| PJ30275 | 20 | OMT segment CMWB needs to indicate that a 3-byte RID is being passed to CSNB instead of a 2-byte RID. |
| PJ30276 | 20 | If a version code is specified on the PATVERS card in the load deck for the offline E-type loader, the reports showing loadsets processed with warnings and loadsets not included on the output medium may not be correct. |
| PJ30277 | 20 | A CTL-3 system error occurs when a read-only string is passed to a function that tries to modify it. |
| PJ30278 | 20 | Following APAR PJ29465, 1) TPFAR may cause an OPR-4 for the SQL PREPARE and SQL EXECUTE IMMEDIATE commands with DB2 version 7 and later; 2) TPFAR does not handle mixed-case letters for user ID and password; 3) TPFAR does not handle the SQL DESCRIBE USING command correctly; and 4) documentation for new parameters for the z/OS DB2 V8 precompiler needs to be updated. |
| PJ30279 | 20 | Add channel path mask information to some tape messages. |
| PJ30280 | 20 | CTL-10 may occur if variable length field is zero. |
| PJ30281 | 20 | With APAR PJ25780 applied, using the TPF MQSeries bridge can result in a CTL-I00003 out of CMQR because heap storage obtained by the calloc() call is depleted. |
| PJ30282 | 20 | Implement four TPF debugger customer requirements, including: registration validation support, SNAPC dump debugging support, pre-trace dump notification, and Step Filtering (Step Debug) support. |
| PJ30295 | 20 | With APAR PJ30102 applied, if the ZEROWIN option is specified, the offline IP trace may inadvertently include packets that are not using Transmission Control Protocol (TCP). |
| PJ30296 | 20 | CYA9 losing Pools that are skipped |
| PJ30302 | 20 | With APAR PJ30217 applied, an application that calls the gethostbyname() or gethostbyaddr() API may result in a SNAPC-EB dump |
| PJ30307 | 20 | Message CLKS0092E displays wrong processor ID. |
| PJ30308 | 20 | Mount of a GDS module on coupling facility locking may not be completed successfully. |
| PJ30310 | 20 | Implement file system check utility ZFILE fsck. |
| PJ30321 | 20 | ALDR on MVS with current LE library gets S0C4 in BAL routine. |
| PJ30323 | 20 | Support for the TPF copy services preprocessor. |
| PJ30325 | 20 | CTL-1 dump from PTV due to core corruption. |
| PJ30331 | 20 | With APAR PJ27477 applied, tape automount may not be completed successfully, and attention process failed messages COSK0196E and COSK0199E can be received when there are multiple paths defined to a tape drive. |
| PJ30352 | 20 | Improve the time accumulation that is used to calculate adjusted utilization. |
| PJ30353 | 20 | Incorrect use of CE1SVP in CCNUCL results from APAR PJ27393. |
| PJ30355 | 20 | TPF 4.1 tpf_pnamc() for single source. |
| PJ30363 | 20 | ZXCPY processing may be skipped for PPRC spare devices due to dismount timing window. |
| PJ30372 | 20 | ZTPLF QUERY displays erroneous information. The problem occurs with TPF PUT 19 and the new compiler. Customers at older PUT levels do not have to worry about applying this APAR. |
| PJ30377 | 20 | Modules in a state change pending condition may be scanned by the Missing Attention Handler. |
| PJ30378 | 20 | After applying PJ24563, READ BACKWARDS commands to a tape drive are not handled properly if an error occurs. |
| PJ30381 | 20 | CTL-4 system error from CMNZ may occur on a ZMAIL CM command when more than three names hash to the same location. |
| PJ30387 | 21 | Allocation of LDEVs after a soft IPL could cause VFA to be
re-initialized
|
| PJ30388 | 20 | After applying APAR PJ28954, if ZMQSC DISPLAY PROCESS is issued before the queue manager was defined, a CTL-3 system error can occur. |
| PJ30390 | 20 | Read message request ID can cause issues. |
| PJ30393 | 20 | With online recoup APAR PJ27469 and LLR APAR PJ29285 applied, a CTL-3 from BRCA may occur during TPF/TPFDF crossover recoup. |
| PJ30395 | 20 | TPF Internet mail server queue record IDs defined incorrectly in mail_records.h |
| PJ30399 | 20 | CTL-3 WHEN COMPILING WITH NOTEST(HOOK) AND OPT(2) |
| PJ30407 | 20 | CTL-584 system errors may occur out of CCIISC when calculating CPU utilization in a shared PR/SM environment. |
| PJ30413 | 20 | Disable socket sweeper for TPF Debugger. |
| PJ30417 | 20 | A protection exception from the FACE Table Generator (FCTBG) function write_card may occur. |
| PJ30418 | 20 | TPF Toolkit: Tracing a CTL-10 results in a short-term system freeze. |
| PJ30435 | 20 | The TPF Internet mail server ZMAIL PATH command is always incorrectly displayed to the Prime CRAS. |
| PJ30437 | 20 | After issuing ZOODB MIGRATE DS IRCPBSS, ZRECP SETUP fails with an RECP0655E error; and errors will occur when accessing collections after a ZOODB MIGRATE for any data store with the DELETE-DELAY attribute. |
| PJ30447 | 20 | Receipt of an unsolicited Isolated Pacing Message (IPM) may cause the LU's Output Message Transmission (OMT) queue to stall. |
| PJ30454 | 20 | Debugger client issues warning messages for deferred expressions when attempting to evaluate expressions that were monitored in a previous debug session. |
| PJ30455 | 20 | C117 can occur while a module is in copy. |
| PJ30465 | 20 | With APAR PJ29925 applied, running CDC may cause a CTL-04. |
| PJ30471 | 20 | Data Collection - Incorrect DASD Service Times |
| PJ30475 | 21 | The message code displayed in messages CEFR0392W, CEFR0393W and
CEFR0394E does not align with the hardware reference materials.
|
| PJ30485 | 20 | Using TPF Toolkit and custom source code, location plug-in breakpoints may not restore correctly. |
| PJ30488 | 20 | The status display for a stopped peer-to-peer remote copy (PPRC) incorrectly shows "Copy Validated' after an IPL. |
| PJ30489 | 20 | When processing dynamic LU bind requests, the TPF local application RVT may be cleared causing all subsequent bind requests to fail with sense code 087D0001. |
| PJ30490 | 20 | Incorrect STATE check causes hung ECBs in CNMT when system is in UTIL state. |
| PJ30494 | 20 | With APAR PJ21791 applied, a CTL-571 catastrophic system error occurs when an accept() response from one socket is received on one I-stream while another I-stream is processing a select() request for the same socket. |
| PJ30498 | 20 | Allow attribute changes for the TPFDB data store. |
| PJ30499 | 20 | CTL-1 from TPF performance analyzer tracing code that makes TPFAR calls. |
| PJ30503 | 20 | CDC DB2 table definition update |
| PJ30506 | 20 | The program data information displayed on a SNAP 6A error is not correct when an attempt is made to enter the base version of an unallocated program. |
| PJ30507 | 21 | A CTL-53 may occur when an application in one I-stream issues a TASNC while a tape switch is being done in another I-stream. |
| PJ30515 | 20 | Corrupted DECB may lead to a catastrophic program error in CCCPSE when the dump data user exit (ZASER DATAX) is active. |
| PJ30518 | 20 | Allow pool reallocation across device types. |
| PJ30530 | 20 | With APAR PJ30133 applied, a CTL-4 system error occurs out of program CRYA when TPF processes a response from a PCI cryptographic accelerator (PCICA) card while the system is in block check mode. |
| PJ30532 | 20 | TPF Toolkit Debug Session 'freezes' in a loop. |
| PJ30533 | 20 | Message XCPY0025E (LOCK FOR COPY SERVICES AREA IS IN USE) occurs when multiple PPRC status displays are kicked off simultaneously. |
| PJ30534 | 20 | C$IBMHDR.H is obsolete. |
| PJ30539 | 20 | System error processing needs to be enhanced to turn off dump logging on system restart dumps. |
| PJ30554 | 20 | Provide cleanup for mods that remain in copy state incorrectly. |
| PJ30556 | 20 | With APAR PJ29214 applied, in the display of QMGR, the Checkpoint High Water Mark field may erroneously indicate that the checkpoint process is in progress. |
| PJ30560 | 20 | With APAR PJ27446 applied, recovery log size can be reduced to zero tracks per module when running the TPF system under VPARS. |
| PJ30565 | 20 | CTL-38 results from TPF handling a chaining check as a hardware error instead of as a software error. |
| PJ30566 | 20 | With APAR PJ29920 applied, the ZMQSC DISP QL command may show negative counts; and ZPSMS PROC FORCE DEACT entered from a processor in restart may fail with CTL-8. |
| PJ30569 | 20 | NSDB statistics are not in the TCP/IP message summary if the message count is 0. |
| PJ30574 | 20 | With APAR PJ26693 applied, an OPR-573 system error occurs out of getsockname() and getpeername() processing. A CTL-3 system error also can occur if the name or name length pointer is NULL. |
| PJ30582 | 20 | A CTL-10 may occur in CYED when the missing attention handler (MAH) redrives a lock request. |
| PJ30584 | 20 | With APPN support (APAR PJ19949), shared printer LU sessions may be deactivated with sense 08900020. |
| PJ30589 | 20 | Got CTL - E2 dump from CDCO when displaying the CDC status in 1052 state. |
| PJ30600 | 20 | Recoup may stop processing if a large number of fixed errors occur. |
| PJ30610 | 20 | PJ29925 may cause an OPR-IDB013C from segment UFB2 when using the TPFDF option in CDC. |
| PJ30616 | 20 | With APAR PJ26693 applied, CTL-4 system errors occurred out of program CMOA during a Type-A Host-to-Host session. In addition, MATIP session blocks and system heap were lost during times of network instability. These errors can also occur out of program CMOB during Type B sessions. |
| PJ30620 | 21 | Enhancement to the TPF MQSeries sweeper to provide trace information
for sweep and unsweep of the queue.
|
| PJ30623 | 20 | TPF needs recovery for connect devices when reset notification is received. |
| PJ30624 | 20 | C$UDEQ references obsolete header file I$UDCL. |
| PJ30626 | 20 | Enhance checking for inactive SSUs and prevent a Ctl-10 during SSU setup loop for the ZDBSO INIT command. |
| PJ30640 | 20 | The prefix page may be corrupted on a CPU timer external interrupt. |
| PJ30641 | 20 | Debugger dumps (CUD1 or CUDA) or stops incorrectly when a watchpoint is deleted. |
| PJ30642 | 20 | CTL-3 dump from cxxfun.o in CISO when running the performance analyzer. |
| PJ30643 | 20 | A CTL-5A may occur during DDR recovery on a 3590 or 3592 drive |
| PJ30647 | 20 | A CTL-571 may occur after applying PJ29533 |
| PJ30650 | 20 | Mounting a blocked tape for capture will result in a CTL-4A and a module not being captured. |
| PJ30655 | 20 | For cleaner assembly, backfit DROPs from z/TPF to TPF 4.1. |
| PJ30660 | 20 | Program CL40 (Deadlock Detection) is delaying cycle-down and causing CTL-E1 dumps. |
| PJ30662 | 20 | RLCHA program CLC8 may cause a CTL-3 by writing past the end of a 4-K common block. |
| PJ30665 | 20 | Create a user exit for unplanned module down processing. |
| PJ30677 | 20 | ZXCPY REMOTE PATH START may timeout if there are many LSS-LSS pairs and the links are busy. |
| PJ30679 | 20 | With APAR PJ28765 applied, CTL-6DC dumps may occur when getting a new ECB with a core block attached. |
| PJ30685 | 20 | PU 2.1 session activation attempt fails with sense 08150003 after CANCEL command times out on an active PU 2.1 LU-LU session. |
| PJ30687 | 20 | With APAR PJ29600 applied, a possible CTL-3 system error can occur or TCP/IP messages may not be properly counted for data collection. |
| PJ30689 | 20 | Retries for FDCTC-extended operations may not function correctly. |
| PJ30695 | 20 | Continuous Data Collection functional command ZCDCO is rejected with an 'ILLEGAL FUNCTION- NO LINKAGE FOUND' message. |
| PJ30697 | 20 | Two PPRC monitors may be active for the same copy group. |
| PJ30698 | 20 | TOUTC does not validate that the byte count is between the minimum and maximum limits causing either channel program checks or a hung tape queue. |
| PJ30701 | 20 | Queries of a large CDC-TPFDF database may take too long and the build scripts for CDCO/CDCP requires updates. |
| PJ30703 | 20 | A CTL-6C2 catastrophic dump may occur during TPF lock recovery |
| PJ30707 | 20 | CTL-4 OUT OF CXCQ BECAUSE OF INCONSISTENCY OF KEYPOINT |
| PJ30708 | 20 | A possible ECB heap memory leak can occur when using the inet_ntoa() function. |
| PJ30709 | 20 | A CTL-D4 system error may occur during SNAPC processing when the LISTC macro is used with the TAG, LEN, and INDIR parameters to dump an ECB core block. |
| PJ30712 | 21 | A CTL-4 catastrophic system error can occur when an incorrect Control Point (CP) name is passed in a control vector 60 (CV60). |
| PJ30718 | 22 | ZXCFG CONFIG REC may cause double release of pools
|
| PJ30728 | 20 | With APAR PJ28064 applied, A CTL-571 catastrophic system error may occur when data collection is running. |
| PJ30735 | 20 | TPF support of the TPFDF enhancement to ZUDFM DEF. |
| PJ30743 | 20 | With APAR PJ21791 applied and with multiple TCP/IP offload devices attached, the APACHE server hangs, and remote workstations cannot connect to the server. |
| PJ30744 | 20 | Restore command reject recovery to use define extent/locate record CCWs. |
| PJ30745 | 20 | Recoup global record may be use a bad file address when migrating from FARF3 to FARF4 to FARF5. |
| PJ30746 | 20 | When migrating from a FARF34 to a FARF45 FCTB it is possible for old FARF3 addresses to look like FARF4 addresses and to be decoded as FARF4 addresses which could cause database corruption |
| PJ30752 | 21 | CTL-4 IN CXCI WHEN ZXCFG DISPLAY GROUP |
| PJ30753 | 20 | CTL-1 running data collection with disconnected coupling facilities. |
| PJ30754 | 20 | Correct RS2 Structure displacement discrepancy in c$recoup.h. |
| PJ30755 | 20 | APAR PJ29897 did not clear EBX052 and EBX056 correctly. |
| PJ30756 | 20 | After applying APAR PJ29160 incorrect code may be generated when a TOURC, TPRDC or TWRTC tape macro is used with a label. |
| PJ30757 | 20 | User-defined global symbols of type GLOBAL_INDIRECT do not resolve to the correct address. |
| PJ30758 | 20 | A CTL-4 may occur on a fork call from a file resident program. |
| PJ30759 | 20 | ZTPLF QUERY DEV-cuu CAT--xxxx displays a negative number if there are more than 32,767 volumes in a category. |
| PJ30762 | 20 | PPRC status incorrect across an IPL when GFS unavailable for keypointing. |
| PJ30766 | 20 | If the TPF system is using Virtual IP Addresses (VIPAs), a complex wide TCP/IP outage can occur when one processor goes into input list shutdown. |
| PJ30775 | 20 | CTL-4 dumps may occur after applying APAR PJ30679 because ECB fields have not been reset. |
| PJ30777 | 20 | TPFAR may attempt to close a socket that does not exist due to a bad hostname or when unable to get a socket causing unpredictable results. |
| PJ30778 | 23 | Programs registered by LU never start the debugger.
|
| PJ30779 | 20 | Header files need to provide single source for CDC. |
| PJ30781 | 20 | OSA Gateway rebalancing enhancement. |
| PJ30782 | 20 | CTL-749 may occur if a large number of pool addresses need to be released from a commit scope. |
| PJ30783 | 20 | Incorrect suffix used when setting Processor ID |
| PJ30784 | 20 | If an attention interrupt is received from the 3215 PRC during CTL-C dump processing, a recursive CTL-C can result, causing errors in CPSF. |
| PJ30786 | 20 | After applying PJ30279, an unsolicited interrupt for a device that has not been ZTVAR Added can cause a CTL-1 system error. |
| PJ30787 | 20 | TPF Internet Mail Server incorrectly handles host names as case sensitive. |
| PJ30791 | 20 | DF DUMP 141300 NEEDS TO INCLUDE ECB ENTRY BLOCKS IN THE DUMP |
| PJ30793 | 20 | With APAR PJ29537 applied, a CTL-3 system error may occur when activating APPN NCP links. |
| PJ30796 | 20 | SAVEREG parameter incorrectly coded on RSWBC macro for cudu40.cpy (ccvage) |
| PJ30798 | 20 | Debugger displays error message when attempting to edit an entry breakpoint. |
| PJ30799 | 20 | Modify reconnect processing for when a reset notification is received. |
| PJ30800 | 21 | ZXCPY REM PATH START SHOULD SKIP MPLF CONNECT DEVICE
|
| PJ30801 | 20 | Identical TPFDF timeout entries are written to the recoup online error log multiple times. |
| PJ30805 | 20 | Debugger dumps with ctrl-230. |
| PJ30807 | 21 | Incorrect messages and CTL-C during PDU Abort
|
| PJ30811 | 20 | ABSTRACT |
| PJ30814 | 20 | With APAR PJ26693 applied, a CTL-4 system error occurs out of the IPRSE C language parser when a ZMATP ALTER, DEFINE, or DISPLAY command is entered incorrectly from the console. |
| PJ30815 | 20 | INCORRECT TAGGING OF RELEASES FROM CLC8 |
| PJ30817 | 22 | TPF may enter a tight loop when a CP-CP session is inactivated
following ZNSCB INIT ALL.
|
| PJ30818 | 21 | TIMESLICE ISSUES WITH TPF DEBUGGER (PJ29614)
|
| PJ30822 | 20 | ZDECB may take a CTL-3 error in segment CVXS. |
| PJ30823 | 20 | With APAR PJ30787 applied, a CTL-3 from CMN8 occurs when calling mail( ) API |
| PJ30825 | 20 | ZCACH may not find caches with certain cache names. |
| PJ30829 | 20 | rsysc() may not release the system heap obtained by gsysc(). |
| PJ30831 | 20 | Check current activation level for all subsystems within PAT validation routines for debug registration |
| PJ30832 | 20 | ZDBUG CLEAR on an active registration entry results in a NULL registration entry. |
| PJ30833 | 20 | C++ Function breakpoints with pointer parameter types may not be set |
| PJ30834 | 20 | Received IPLA0050E message for keypoint pointer record ID error while IPLing from loader general file. |
| PJ30835 | 20 | The link-edit step may fail for DLMs or DLLs which contain OCO code and non-OCO user exit code. |
| PJ30837 | 20 | Loss of a reset notification interruption to a MPLF connect device can cause MPLF lock-granted processing to stall. |
| PJ30838 | 20 | A CTL-C, no ECBs available, may happen on cycle to 1052 state. |
| PJ30839 | 20 | CHANGE TPF CODE TO SUPPORT V1R6 COMPILER. |
| PJ30840 | 20 | MPIF may cause a CTL-573 dump when attempting to process connect requests due to an incorrect length used in an EX instruction. |
| PJ30842 | 20 | With APAR PJ21791 applied, connection requests from remote systems are not accepted by TPF in a timely manner when more than one offload device has been attached to the system. |
| PJ30843 | 20 | CTL-4 out of CMN8 occurs when sending large messages using the mail( ) API |
| PJ30848 | 20 | With PJ25780, If a TPF MQSeries Sender channel encounters an error from the remote MCA, the channel may hang in RUNNING state. |
| PJ30849 | 20 | After PJ29320, message MCPY0205T remains unclear. |
| PJ30850 | 20 | Retry of a locking operation after a channel error may not function properly. |
| PJ30851 | 21 | GDS or GF mount may fail if trying to connect with a lock space greater than 16K. |
| PJ30852 | 20 | Missing Attention Handler (MAH) enhancements |
| PJ30853 | 20 | After apply PJ30282, CTL-6DA dump will occur when issuing SNAPC with ECB=NO parameter. |
| PJ30854 | 20 | With PJ28363, data reduction report may show an incorrect value for CORE POOL BYTES PER ECB |
| PJ30860 | 20 | A CTL-6DF, CTL-C117, or similar recover log error may occur when deleting a large collection. |
| PJ30861 | 20 | A CTL-1 or core corruption may happen on a TIMEC macro call. |
| PJ30862 | 20 | TPF Toolkit requires session name. |
| PJ30873 | 20 | Due to PJ30390, a path failure may cause a Read Message IOB to infinitely retry the operation on the failed path. |
| PJ30874 | 20 | CTL-38 INVALID DEVICE INTERRUPT OR INTERRUPT SEQUENCE is issued for unsolicited device end. |
| PJ30876 | 20 | MPIF may cause a CTL-6DA dump in the MPIF data received user exit for device end notification because an SVA address is passed in the parameter list. |
| PJ30877 | 20 | With TPF DECB support (PJ27393) applied, ECBs may become hung following a CTL-2D system error. |
| PJ30882 | 20 | A CTL-4651 and CTL-38 may occur after a TPF purge lock. |
| PJ30883 | 20 | A CTL-38 MAY OCCUR AT COPY EOJ TIME ON SIMPLEX DASD. |
| PJ30884 | 20 | MPIF may take a CTL-158 dump due to a wrapping sequence number problem. |
| PJ30905 | 20 | CTL-4 OUT OF DEBUGGER WITH PJ30833 APPLIED |
| PJ30909 | 20 | ZDUPD A and ZDUPD R may not recover correctly, causing corrupted pool counts in CTK9 and multiple releases. |
| PJ30911 | 20 | With PJ30766 applied, a CTL-3 system error can occur when moving VIPA's from one processor to another within a loosely coupled complex. |
| PJ30917 | 20 | EBCDIC not-sign ('¬') character (x'5F') handled as end-of-message to 3270 RO. This APAR also resolves a problem introduced by PJ29649. |
| PJ30918 | 21 | PDU restart not properly testing for PDU active at shutdown.
|
| PJ30921 | 20 | An assembly error may happen when PI1DT is used with a suffix. |
| PJ30922 | 20 | CTL-4 dumps will occur in CL24 when CL21 reaches the recovery point and CL24 is ready to validate the next buffer. |
| PJ30933 | 20 | A TCP SYN/ACK received with the wrong acknowledgement number, while the socket is in SYN SENT state, could cause the socket connection to never come active. |
| PJ30936 | 20 | PROVIDE TPF XML APIS FOR USE WITH THE B2B XML SCANNER. |
| PJ30942 | 20 | Message SOCK0021I may contain a character which is not valid. |
| PJ30945 | 20 | A possible CTL-22 system error can occur after movable VIPA restart. |
| PJ30946 | 20 | CDC COLLECTOR NOT CAPTURING DATA FOR DEVB POOLS |
| PJ30949 | 20 | Fix array subscript usage in TPF Internet Mail Server |
| PJ30951 | 21 | TDCTC PROBLEMS
|
| PJ30952 | 21 | A timing problem in TCP keepalive processing could cause TCP connections to fail due to retransmit timeouts. |
| PJ30955 | 22 | SHORTTERM POOL LOOP DETECTION IN RECOUP CHAIN-CHASE
|
| PJ30958 | 21 | ZSLDR DATA LOAD function does not indicate the message severity.
|
| PJ30961 | 21 | FC33 bit mask not being properly cleared after ZRECP ABORT.
|
| PJ30963 | 20 | With PJ30490 applied, Socket call takes error when system is in CRAS state. |
| PJ30965 | 20 | With PJ25496 applied, the TPF system may force a software IPL due to a CLH lock being held during system error processing. |
| PJ30974 | 20 | When a SNAP 1F01B system error occurs an additional 4000 bytes of data in the dumped. |
| PJ30975 | 20 | With PJ29132, CTL-C117 may occur when a TPF MQSeries swept queue is serviced. Also, CTL-4 or other unpredictable results can occur on MQGET from a swept queue. |
| PJ30981 | 20 | Debug source view does not come up for C/C++ objects with mixed-case after applying PJ30274 |
| PJ30984 | 21 | During IP Scan processing, a CTL-C system error may occur when
processing the AOR timer chain or the waiting for
acknowledgement chain.
|
| PJ30986 | 21 | In EREP reports the 9037 (Sysplex Timer) alternate port information may be wrong. |
| PJ30987 | 20 | With PJ30708 applied, a possible OPR-EB can occur when issuing an inet_ntoa() function call. |
| PJ30996 | 20 | CTL-10 dumps may occur in program CL40 when large number of ECBs are waiting for the same file address in a loosely coupled system. |
| PJ30999 | 20 | PJ28712, lost interrupt path recovery SPE, can remove operational paths from devices other than the failing device. |
| PJ31002 | 20 | Debugger dumps with CTL-4 when clicking on NODBUG stack frame |
| PJ31003 | 20 | TRY/CATCH/THROW Results in OPR-EB and CTL-10. |
| PJ31004 | 20 | With PJ29925 applied, customers can get C/C++ compilation issues due to the inclusion of a TPFDF header file. |
| PJ31016 | 20 | UNRESOLVED DETECTED BUILDING WITH PJ30862 |
| PJ31041 | 20 | Debugger Enhancement: conditional registration support, data level operation support, improve performance of memory view, and constructor initialization variable display. |
| PJ31043 | 21 | While using Secure Socket layer (SSL), a CTL-3 may occur when using threads on multiple I-streams. |
| PJ31047 | 20 | VALIDATE TOD DURING RESTART IN LOOSELY-COUPLED COMPLEX |
| PJ31048 | 20 | Staging of OSA-Express code changes for a future enhancement. |
| PJ31058 | 21 | TARGET(TPF) CHANGES.
|
| PJ31059 | 21 | Operability enhancements for commit log recovery processing.
|
| PJ31060 | 21 | CTL-4 occurs during DLL cleanup.
|
| PJ31077 | 21 | With PJ30156 applied, OCV (Output Chaining Vector) is not returned when tpf_cryptc() or CRYPC macro is issued with TPF_TDES_CBC or TPF_DES_CBC. |
| PJ31081 | 20 | After applying PJ24563, block counts displayed in ZDTAP may be incorrect if the application uses the Read Previous CCW when reading the tape. |
| PJ31083 | 20 | An update needs to be made to TPF to allow GETCC to support a new equate that is used by TPFDF to support L3 block usage for ALCS customers. |
| PJ31087 | 21 | With APAR PJ27023 a catastrophic system error C117 can occur when there
is an error checkpointing an MQSeries receiver channel.
|
| PJ31088 | 21 | IMPLEMENT TOD CLOCK VALIDATION |
| PJ31090 | 21 | An ONCODE 8094 error may occur in JRS3 when MPIF PATH ACTIVITY REPORT is being built during data reduction processing. |
| PJ31101 | 20 | TPF TOOLKIT should not update storage in page zero. |
| PJ31102 | 20 | With PJ28591 applied, SIPCC messages to start the VIPA Released processing may be suppressed, causing a VIPA move to not complete. |
| PJ31107 | 21 | TPF Collection Support cleanup processing may cause an apparent hang condition in applications that use collections, such as TPF MQSeries. |
| PJ31110 | 21 | Let C functions coded in Basic assembler language (BAL) using TMSPC use
PBASC.
|
| PJ31111 | 21 | FAILED PPRC PATH STOP LEAVES SPARE DEVICES MOUNTED
|
| PJ31114 | 21 | This APAR enhances the LREGSC and SREGSC macros to save and restore R14/R15. |
| PJ31120 | 21 | Due to PJ25094, temporary code in the $LENTRY macro could be removed which would cause CE1FIND/FILES to be incrememted twice for DECB FIND/FILE APIs |
| PJ31126 | 20 | Program name and record ID fields set up inefficiently. |
| PJ31135 | 21 | With Continuous Data Collection (CDC) running, negative values for tape information could be generated. |
| PJ31144 | 21 | CDC Enhancement to collect and display system traces and utility switches. |
| PJ31147 | 21 | Compile issues and SIP issues with the TPF Debugger |
| PJ31163 | 20 | CAPT NEEDS TO BE UPDATED TO SPECIFY PUT20 AS PUT LEVEL |
| PJ31164 | 21 | With PJ28097 applied, the Face Table Generator incorrectly requires a
BASE parameter on 4K duplicated SPARE RAMFILs that follow FARF6 pool
RAMFILs
|
| PJ31165 | 21 | A CTL-1 or various other system errors may occur when ECB heap node headers are corrupted by an application. |
| PJ31168 | 21 | OSA-Express Output Message Enhancement
|
| PJ31174 | 21 | OSA-EXPRESS SUPPORT FOR TPF |
| PJ31177 | 21 | CTL-3C7 WHEN BRB4 SENDS BRB40007I |
| PJ31183 | 21 | With APAR PJ21791 applied, a CTL-1 system error occurs when an accept() response from the TCP/IP offload device is processed. |
| PJ31186 | 21 | Recoup timeout processing in BCPY may cause a CTL-3 or OPR-041261.
|
| PJ31192 | 20 | CUDB DOES NOT ASSEMBLE WITH PJ31041 APPLIED |
| PJ31207 | 21 | Continuous data collection stops upon data collection/reduction start |
| PJ31208 | 21 | APAR PJ29915 CAUSED EXITED PROCESSOR TO ABORT RECOUP IN L/C ENVIRONMENT |
| PJ31212 | 21 | CSS2 and CSS5 may not assemble with a version code of P1 or P2. |
| PJ31216 | 21 | WHEN NO CLIENTS CONNECT DASD FILLS UP FROM MQ SWEEP. |
| PJ31220 | 21 | CTL-4 IN UDDIPM INITIALIZING STDIN FROM D0 BLOCK |
| PJ31234 | 21 | Corrupted DECB may lead to core corruption and CTL-1 dumps. This problem was injected by PJ27393 |
| PJ31237 | 21 | UPDATE INCLUDE STATEMENTS FOR USS COMPILE |
| PJ31240 | 21 | TPF WebSphere MQ Support for improved channel stability.
|
| PJ31251 | 21 | DATA REDUCTION SUGGESTIONS |
| PJ31252 | 21 | PJ29767 introduced a deadlock condition in multi-mod copy |
| PJ31254 | 21 | C API FOR NUMLC AND MAXBC
|
| PJ31255 | 21 | Debug on System Error enhancement - stop on all system errors
|
| PJ31258 | 21 | Allow TPFSYM to build on linux system.
|
| PJ31259 | 22 | After applying PJ29032, when MQSeries for TPF attempts to
checkpoint a queue it can do excessive DASD I/O.
|
| PJ31275 | 21 | A CTL-46 CAN OCCUR DURING TAPE SWITCH PROCESSING.
|
| PJ31276 | 21 | Update User Defined symbols to allow updating INDIRECT type globals.
|
| PJ31278 | 21 | Perfomance analyzer does not trace BAL program CREMC'd from C program. |
| PJ31285 | 21 | The next valid ordinal is not returned on a FAC8C or FACZC call if the
input ordinal specified is within a pool ordinal gap
|
| PJ31287 | 21 | Sockets for debugger session may be left open when a debugger error
occurs.
|
| PJ31293 | 21 | Unplanned mod down might leave alternate in lock suspense.
|
| PJ31299 | 21 | CPU utilization and adjusted CPU utilization are inconsistent in Data
Reduction reports
|
| PJ31300 | 21 | With PJ28659 applied, ZDTCP PING with a SIZE parameter specified could
fail if the size specified is greater than the Maximum Transmission
Unit (MTU) of the connection
|
| PJ31306 | 22 | An OPR-IC62038 system error can occur when an LU 6.2 session is
initiated from an I-stream other than the main I-stream.
|
| PJ31312 | 21 | With PJ30850 applied a CTL-706 and/or CTL-704 can occur after an
interface control check or storage control restart.
|
| PJ31313 | 21 | SINGLE SOURCE PRLGC/EPLGC MIGRATION
|
| PJ31314 | 21 | A CTL-4 may occur when debugging a program, deleting a variable and
then performing operations on an existing variable.
|
| PJ31317 | 21 | Non-MPLF related Read Message loops may erroneously advance the Missing
Attention Handler (MAH) lock granted window.
|
| PJ31320 | 21 | A CTL-4 dump may occur when ipling the 9th or higher processor in a
loosely coupled complex.This problem was injected by APAR PJ27785.
|
| PJ31322 | 22 | After applying PJ29845, an Assigned Elsewhere error on a 3590
can cause the system to run out of ECBs.
|
| PJ31323 | 21 | With PJ30455 applied, a CTL-2 can occur when copy is running on a
non-BSS subsystem.
|
| PJ31331 | 21 | TPF debugger did not detect load breakpoint of 24 bit shared file
resident programs.
|
| PJ31337 | 21 | Network Services Database support may not read port numbers correctly
from /etc/services file
|
| PJ31344 | 21 | With PJ28496 applied, AOA model listener needs to be recycled when
activation number is changed.
|
| PJ31355 | 22 | Messages sent or received by remote Websphere MQ Clients which
issue MQGET, MQPUT, or MQPUT1 requests to the TPF Websphere MQ
SVRCONN channel are not being counted for NSD
|
| PJ31371 | 21 | Registering a session with the debugger may cause a 572/573 dump.
|
| PJ31372 | 21 | Reduce keypointing of short term directories while short term
reorder is in progress.
|
| PJ31373 | 22 | A CTL-4 may occur when a ZOLDR ACCEPT is done on a loadset
containing an ISO-C library.
|
| PJ31378 | 21 | Abnormal thread termination, when using SSL, can cause various errors
and dumps (CTL-1, CTL-2, CTL-571)
|
| PJ31379 | 21 | The tpf_xml_parseDocument api fails when called with a handle of
B2B_XML_SCANNER parser type
|
| PJ31382 | 21 | Persistent CPU channel path issue may cause loss of connect
device without trying other available paths.
|
| PJ31384 | 21 | Format 0, message F, reason code 0x91 sense data should
initiate MPLF lock recovery.
|
| PJ31393 | 21 | Correct CDC reporting of the number of MQseries channels
defined.
|
| PJ31394 | 21 | With APAR PJ28848 applied, a CTL-1 system error occurs out of CCLAW1.
|
| PJ31397 | 21 | ZRECP RECALL SEL command with record id=X'0000' does not work correctly.
|
| PJ31403 | 21 | Performance analyzer "undetermined hook" message for library functions.
|
| PJ31422 | 21 | A CTL-1F2 causes ZMCPY to fail with a CTL-1F5.
|
| PJ31427 | 21 | A CTL-6DF or other catastrophic error may result when restoring
or deleting a large collection. Also, miscellaneous errors can
occur for ZBROW and ZOODB command utility functions.
|
| PJ31429 | 21 | Add 20 bytes for user area at end of trace entry.
|
| PJ31443 | 21 | Following APAR PJ27079, TPFAR does not allow a hyphen to be specified
for the hostname parameter on the ZSQLD functional message.
|
| PJ31445 | 21 | GFSP0053E IS GENERATED WITH INCORRECT MSGID
|
| PJ31447 | 22 | Values that are not valid are accepted but ignored and routines
do not properly check/set return codes so as to issue error
messages when errors occur.
|
| PJ31457 | 21 | SEQUENCE ERROR could occur for ZRECP LEVEL-PAUSE command during
phase 1
|
| PJ31460 | 21 | CTL-I00C13C catastrophic dump may occur when force deactivate the local
processor in a loosely couple complex.
|
| PJ31462 | 21 | Ctrl-4 from CUDA/CUD1 from the CUDALL object from function ByName or
ByNameWOCase.
|
| PJ31464 | 21 | Due to PJ31254, create c_blktyp.h wrapper
|
| PJ31465 | 21 | Debug source file not found for new PDS file name version.
|
| PJ31481 | 21 | ECB heap storage is depleted when an SSL application uses the
SSL_shutdown() function.
|
| PJ31485 | 21 | A DLAYC loop can occur in restart because of an incorrect interface
between segments CLIB and ULIB.
|
| PJ31486 | 21 | Add the ability to build e-mail messages with attachments that
can be sent using the mail( ) API
|
| PJ31487 | 21 | Z/OS 1.6 compiler upgrade breaks debugger memory view.
|
| PJ31495 | 22 | Invalid return code for TCP/IP read() when using CDLC link.
|
| PJ31497 | 21 | CTL-230 from TPF Debugger if the application exits before loading DLL
program.
|
| PJ31503 | 21 | Duplicate 3270 Local PRC commands can be inadvertently entered. Also,
2074 control unit "quick busy" condition can cause loss of message text.
|
| PJ31504 | 22 | Improve performance while viewing large source files. Fixed
viewing c/c++ source on the TPF file system.
|
| PJ31510 | 21 | A new user exit is needed to allow the customers to release
items in the user field CA4USR when cretc entries get purged
during cycle down.
|
| PJ31516 | 21 | With PJ29675, a ZXCPY LOCAL command failed with message XCPY0032E
reporting that the PPRC feature is not installed.
|
| PJ31517 | 21 | CTL-4 when building change packets or requests after application exit.
|
| PJ31525 | 22 | Recoup may report lost addresses for records that belong to a
collection data or index record release chain. Making these
records available will cause database corruption when TPFCS
attempts to re-use them.
|
| PJ31527 | 21 | An out of memory message and a protection exception will be seen if a
FCTB is generated that contains FARF6 UFT values greater than 32767.
|
| PJ31528 | 24 | Tape devices that encounter write data checks need to have have
labels added offline.
|
| PJ31532 | 21 | Restart hangs after a different processor is deactivated.
|
| PJ31534 | 21 | TPF Debugger problem with recursive function calls
|
| PJ31543 | 21 | CTL-4 may occur in BCC2 if FCOD is coded in the recoup
descriptor.
|
| PJ31546 | 21 | After ZPSMS PROC DEAC, the deactivated processor is still shown to have
active connections to coupling facilities.
|
| PJ31547 | 21 | IPLB can hang during DASD roll-call with the HMC console enhancement
(PJ28622) applied.
|
| PJ31548 | 21 | Provide support for HLASM V1R5 in gentag/gntagh.
|
| PJ31554 | 21 | A CTL-571 or CTL-572 dump may occur after a system error dump.
|
| PJ31555 | 21 | Remount of general file fails after migrating DASD to CF
locking.
|
| PJ31557 | 21 | After applying PJ30620, certain ZMQSC operator commands fail including
ZMQSC DEF CHL.
|
| PJ31562 | 21 | With PJ30455 applied, a CTL-1 may occur during copy up or all.
|
| PJ31564 | 21 | With APAR PJ30708 applied, TPF's ZDTCP NSLOOKUP command may
incorrectly display dotted decimal IP addresses upon return.
|
| PJ31565 | 21 | CTL-6C2 during file copy when target module takes unplanned down.
|
| PJ31569 | 21 | SNP-I000060 dumps can occur when resources are low.
|
| PJ31578 | 21 | The packaging for MQSeries APAR PJ30848 erroneously contains the CMQS
load module instead of CUIF.
|
| PJ31587 | 21 | CTL-38 during ZBUFC ALL IMP after PJ30883
|
| PJ31592 | 22 | Other messages may be appended to the end of the CSMP0097I
message on 3270 consoles.
|
| PJ31600 | 21 | CTL-75 may occur when "disconnect all" from VA/TPF
|
| PJ31601 | 21 | Support for TPFDF Auto De-indexing APAR PK26312
|
| PJ31603 | 21 | CTL-4 out of the debugger (CDB2)
|
| PJ31612 | 21 | Miscellaneous CF locking updates
|
| PJ31614 | 21 | TPF_XML_DELETE_ELEMENT CAN DELETE INCORRECT ELEMENT
|
| PJ31616 | 21 | As a result of PJ31548, GENTAG does not produce correct output
|
| PJ31617 | 21 | Performance analyzer GETMSGLE, RETURN CODE 7 and OPR-IDB0134
|
| PJ31618 | 22 | In Websphere MQ for TPF, too many messages can be unswept back
into memory, causing applications using LODIC to not be able to
execute properly.
|
| PJ31620 | 21 | The zfile chmod command can result in a CTL-3 when invalid
octal digits are used for mode.
|
| PJ31622 | 21 | With PJ27387, ZPROT commands may fail with CTL-4. Also, the
ZPROT DSP UT command may not display all the utilities assigned
to the current processor.
|
| PJ31623 | 21 | ZDLCK DISPLAY and DELETE updates
|
| PJ31628 | 21 | Changes required to TPFDF RECOUP keypoint for APAR PK32378
|
| PJ31632 | 21 | ALLOW THE LOADER TO RUN DISP=SHR
|
| PJ31635 | 21 | With PJ31554 applied, program error may occur in CCCPSF during restart.
|
| PJ31638 | 22 | CORRECT ERROR DISPLACEMENT IN ONLINE ERROR LOG
|
| PJ31640 | 21 | CTL-C11C dump may occur during system error exit processing.
|
| PJ31643 | 23 | TPF support for the TS7700 Virtual Tape Server in a grid
configuration.
|
| PJ31658 | 21 | C++ PROGRAMS INCLUDING MATRICES.H GET COMPILER ERRORS
|
| PJ31660 | 21 | CO-REQ TPF APAR needed for TPFDF APAR PK33367.
|
| PJ31664 | 21 | ENQ_NAME PROVIDED ON ENQC CALL IS NOT INITIALIZED
|
| PJ31671 | 21 | Capture/restore keypoint pointers are not updated correctly.
|
| PJ31672 | 21 | After applying APAR PJ30620 a CTL-4 or CTL-3 can occur during
sweep processing.
|
| PJ31676 | 21 | CTL-38 DURING ZAMOD UP WITH SIMPLEX RECORDS
|
| PJ31677 | 21 | Dump occurs when restoring line breakpoint set prior to PJ28649
after applying PJ28649
|
| PJ31678 | 21 | Debugger CTL-3 streaming dumps with Storage check mode on
|
| PJ31684 | 21 | GETTING SOAP FAULT WHEN USING HEADERS WITH NESTING.
|
| PJ31685 | 21 | Infinite loop from FindPreLoadedDLL (CUDA)
|
| PJ31687 | 21 | CTL-5A occurs when a dump triggers a tape switch on a device
associated with outstanding interrupts.
|
| PJ31689 | 21 | APAR PJ29891 did not list CUD140.exe to be linked.
|
| PJ31696 | 21 | TPF XML CREATEXMLSTRUCTURE
|
| PJ31704 | 21 | If CDC uses TPFDF to store data, then data corruption may
occur. The corruption can occur if a chained block becomes
empty in file IRC1DF and recoup is subsequently run.
|
| PJ31705 | 21 | A TPF 4.1 co-requisite APAR is needed for TPFDF 1.1.3 APAR
PK33468
|
| PJ31716 | 21 | LODIC DATA COLLECTED BY CDC IS INCOMPLETE.
|
| PJ31718 | 21 | CTL-10 possible when collapsing / monitoring expressions
|
| PJ31719 | 22 | CTL-4 dump out of CDB2 when viewing typedef'd structure or
class info.
|
| PJ31721 | 21 | PJ30851 loaded the wrong maximum lockspace.
|
| PJ31722 | 21 | TPFDF recoup hangs on a secondary processor when a record ID
begins with 'R'
|
| PJ31726 | 21 | Move locks for general data set modules may not occur when
using coupling facility locking.
|
| PJ31727 | 21 | DEBUGGER MODIFICATION TO DE-REGISTER ON MULTILPLE ADB01 DUMPS.
|
| PJ31728 | 21 | With coupling facility locking, a ZRIPL from NORM state may
encounter a delayed Restart schedule.
|
| PJ31729 | 21 | PJ30918 - Results in BCAI0009E during restart on non-Loosely
Coupled systems.
|
| PJ31734 | 21 | Event macros following normal path on error condition can cause
CTL-3 while processing ZDUPD S.
|
| PJ31738 | 21 | DELETE INAPPROPRIATE INLINE DC COPYRIGHT STATEMENTS
|
| PJ31742 | 21 | A CTL-5006 may occur when a CF has insufficient space to
allocate a structure
|
| PJ31743 | 21 | DUE TO PJ31620 - SSLSHARED.TXT CANNOT BE READ
|
| PJ31746 | 21 | CTL-3 and CTL-4 system errors occur because the i$mscb.h header
packs structures and unions with the #pragma pack(1) compiler
directive but does not issue a corresponding #pragma
pack(reset) directive.
|
| PJ31752 | 21 | ZMAIL command processing can leave temporary files in the TPF
file system
|
| PJ31754 | 21 | Reserve inodes for superuser.
|
| PJ31759 | 21 | Remove $ in TPF 41 source file names
|
| PJ31760 | 23 | Due to PJ23378, the TPF system may go into and remain in input
list shutdown when many ECBs are created using CREMC.
|
| PJ31762 | 22 | Corrects various problems in OSA-Express support and TCP/IP
native stack support.
|
| PJ31763 | 21 | PROBLEM WITH RECOUP CODE - BS0C
|
| PJ31768 | 22 | DETERMINE WHEN USEREXIT CODE OPERATES AS CP EXTENSION
|
| PJ31770 | 21 | Potential erroneous CTL-86 dump after 3215 console fallback.
Also, erroneous checks in CVKN can eliminate an eligible CRAS
device during console fallback. CVKN also can index beyond the
end of the Line Status Table.
|
| PJ31778 | 21 | Move locks for general data set modules on coupling facility
locking does not account for dummy mounted devices.
|
| PJ31780 | 22 | With PJ30044 applied, cycle down performance will be affected
because VFA buffers are scanned twice for delay file candidates.
|
| PJ31783 | 21 | CTL-584 due to defer / delay time accumulator being too large
|
| PJ31785 | 22 | SSL_CTX_USE_PRIVATEKEY_FILE() may fail because flags field in
struct evp_cipher_ctx_st is not initialized.
|
| PJ31786 | 22 | FIXEDOVERFLOW condition or corrupted output in SEQUENTIAL FILE
ACCESS SUMMARY report.
|
| PJ31787 | 21 | TPF Debugger may not correctly evaluate character arrays inside
structures as strings.
|
| PJ31789 | 21 | After applying PJ29936 values in c$mqmg.h are in conflict with
those in soap.h, preventing the two headers from being used in
the same source.
|
| PJ31791 | 21 | The fopen() API may fail when creating files.
|
| PJ31793 | 23 | With PJ31240, TPF Websphere MQ sender channels with heartbeat
active may deplete system resources.
|
| PJ31800 | 22 | With PJ27028, The TPF FTP server does not detect clients that
no longer have connectivity.
|
| PJ31803 | 21 | With PJ25095 (VFA Sync SPE), a CTL-I00600A catastrophic error
can occur when changing RIAT attributes from VFA
non-synchronous to VFA synchronous.
|
| PJ31806 | 22 | A system hang may occur in EXITC processing if the Data Event
Control Block (DECB) detached block table is corrupted.
|
| PJ31808 | 22 | With PJ31299 applied, data reduction fails.
|
| PJ31812 | 21 | Time initiated status message lost switching subsystems.
|
| PJ31816 | 21 | RECORD ID IS BEING SET FROM LOCATION 0000
|
| PJ31817 | 21 | With PJ30437, a CTL-3 error or unpredictable results can occur
during collection migrate. Also, correct CTL-749 from ZBROW
NAME DISP ALL.
|
| PJ31820 | 21 | BOFD0089E GENERATED AS BOFU0089E ON 4.1
|
| PJ31829 | 21 | CTL-13 dump does not contain the failing program name.
|
| PJ31836 | 21 | The response from a ZRECP STATUS command issued during TPFDF
recoup from a remote terminal does not get sent back to the
originator. Instead, it is incorrectly sent back to prime CRAS.
|
| PJ31839 | 21 | Compile error when compiling cudacx.cpp with IBM Compiler
|
| PJ31840 | 22 | Unsolicited interrupts from tape and OSA devices following a
CTL-C may cause an error out of CCCPSE that would delay the IPL
and subsequent system recovery.
|
| PJ31841 | 22 | Possible IDBD002 (invalid item size) system error on a CRUISE
VERIFY operation after falling back from 8-byte file address
headers.
|
| PJ31843 | 21 | ZFILE LS -L MAY PRODUCE A CTL-4
|
| PJ31847 | 21 | When applying PJ31427, link-editing CJ00 results in warnings
due to unresolved references. Also, the list of segments to be
assembled and segments to be link-edited for PJ31427 was
incomplete.
|
| PJ31848 | 21 | TMSLC Snap dump out of CUD0/CUD1 with PJ30818 applied
|
| PJ31849 | 23 | Various TPF Debugger performance improvements.
|
| PJ31850 | 22 | With PJ27023 applied, deleting an MQSeries queue may result in
errors running recoup.
|
| PJ31851 | 22 | With PJ29793 applied, the continuation line on the SERRC macro
incorrectly starts in column 17.
|
| PJ31852 | 22 | A CTL-4 system error may occur when running shared SSL sessions.
|
| PJ31855 | 22 | When lost interrupt recovery retries a PPRC establish copy pair
command, the retry may fail with a pair already established
error.
|
| PJ31857 | 21 | Allow explicit definitions on PNAMC FIELD parameter.
|
| PJ31863 | 21 | CTL-4 may occur in segment BCC2 due to APARP PJ28957 being
applied.
|
| PJ31864 | 22 | ZBROW DISPlay ELEMent fix and ZBROW ALTER ELEMent changes
|
| PJ31866 | 21 | GETTING SOAP FAULT ON VALID XML DOCUMENT
|
| PJ31872 | 22 | Update the VFA lock infrastructure. Also, lock contentions for
non-BSS simplex records may not be correctly processed.
|
| PJ31874 | 21 | PROVIDE SINGLE SOURCE SOLUTION FOR LONG* PARAMETERS
|
| PJ31876 | 22 | PROCESSOR DEACTIVATION ISSUE WITH RECOVERY LOG TAKE OVER
|
| PJ31878 | 21 | CTL-6DF WHEN REMOVING LARGE COLLECTIONS.
|
| PJ31891 | 22 | TPF Debugger TPF view support.
|
| PJ31894 | 22 | With PJ29967 applied, deleting an MQSeries channel may result
queue definition corruption after a system IPL.
|
| PJ31895 | 22 | Messages sent from TPF debugger to the debugger client do not
meet IBM standards
|
| PJ31898 | 22 | Traditional data collection reports might be incorrect when ran
with over 300 observations.
|
| PJ31900 | 21 | tx_commit may cause CTL-3 and CTL-C13C dump.
|
| PJ31901 | 22 | With APAR PJ28195 applied, a CTL-1 system error occurs during
the counting of TCP/IP messages when an application corrupts
protected storage.
|
| PJ31903 | 22 | Add a call to the loadset history user exit,UELL, from E-type
loader restart.
|
| PJ31906 | 21 | With PJ30134 applied a CTL-4 or incorrect timestamp may be
displayed for initial C stack frame
|
| PJ31907 | 22 | "NODE VALUE UNAVAILABLE" when displaying a string at the end of
a frame boundary
|
| PJ31912 | 21 | CTL-4 FROM CUDA WHEN DE-REFERENCING POINTER
|
| PJ31913 | 21 | CUDALL RC=4 ON COMPILE DUE TO TYPO ON EXPORT
|
| PJ31928 | 22 | LOCAL COPY START ON REMOTE DEFINED GROUP CORRUPTS LSS
|
| PJ31937 | 21 | FIXEDOVERFLOW condition during PROGRAM data reduction report
processing.
|
| PJ31938 | 22 | With PJ27679, activate_on_receipt() may not be completely load
balanced across all istreams.
|
| PJ31942 | 22 | CTL-4 CUDV AFTER APPLYING PJ31255
|
| PJ31943 | 22 | With PJ29675, resource depletion can occur when running local
copy, due to slow I/O response from Establish FlashCopy CCWs.
|
| PJ31946 | 21 | Staging of OSA-Express code changes for a future enhancement.
If you applied APAR PJ31048 on PUT 20, you must apply this APAR.
|
| PJ31965 | 23 | If ZTMNT is issued to a drive that is mounted as an ALT tape
and the tape name specified is already mounted then the ALT
tape will be removed without any notification to the operator.
|
| PJ31967 | 22 | Possible system hang occurs for a processor locking file
address following a C121 dump after FILUC in CMVO.
|
| PJ31968 | 22 | System Heap Corruption / CTL-4 dump when using common symbol
table
|
| PJ31972 | 21 | CAPT NEEDS TO BE UPDATED TO SPECIFY PUT21 AS PUT LEVEL
|
| PJ31974 | 22 | Add support for Base64 encoding and decoding
|
| PJ31982 | 22 | CTL-4 and/or comms failure when dererencing a pointer to an
array.
|
| PJ31987 | 22 | PREVENT TAPE MOUNT IN ERROR DURING RECOUP ABORT PROCESSING
|
| PJ31988 | 21 | After applying PJ31900, OPR-EB and CTL-1 dumps can occur.
|
| PJ31989 | 22 | CTL-4 and Communication error 7 when changing the value of enum
type variable.
|
| PJ31991 | 22 | CTL74F OUT OF CUD1 with PJ31041 applied
|
| PJ31992 | 22 | MCPY not paused due to incorrect coding of PJ29227
|
| PJ32001 | 22 | zTPF Websphere MQ support for MQOO_INPUT_SHARED
|
| PJ32002 | 22 | When using movable VIPA support, a move of a VIPA from one
processor to another in a loosely coupled complex may not
complete.
|
| PJ32004 | 22 | A CTL-75 (HEAP CORRUPTION) dump may occur when issuing the
"ZFILE CP" command.
|
| PJ32006 | 22 | Incorrect offset calculated when getting DSECT from UCST for
conditional registration
|
| PJ32007 | 22 | CORRECT APAR DOCUMENTATION FOR PJ31754.
|
| PJ32018 | 22 | A successful automatic fallback of the 3270 PRC or 3270 RO may
still leave some error indicators set on, causing the new
console to hang up after the fallback completes.
|
| PJ32020 | 22 | The global keypointer CVFE stalls when an exit-type dump occurs.
|
| PJ32023 | 22 | REQUEST FOR RESOLUTION OF GCC ERRORS ON INCLUDING MATR
|
| PJ32027 | 22 | With PJ31803, a record ID zero IOB in the chain of RHT waiters
will cause the rest of the chain to not be updated.
|
| PJ32030 | 22 | The stand alone dump program SADUMP will fail with a PSW of
000A000 B2350E00 if the system has more than 2G of storage.
|
| PJ32033 | 22 | CTL-1 in Debug on System Error due to incorrect mask check
|
| PJ32034 | 22 | Dump processing may hang due to a deadlock in the PROGRAM
ALLOCATION TABLE (PAT) emergency unlock routine in CCEB.
|
| PJ32037 | 22 | Tape Automount always returns that the volume is unexpired if
the TPF system is in restart.
|
| PJ32038 | 22 | UNABLE DIAGNOSE OR FIX VALIDATE PROBLEM NO FILE ADDRESS
|
| PJ32039 | 22 | Null block not handled in InitializeScopeLocalVars
|
| PJ32040 | 22 | CTL-3 in CUD1 when user closes the toolkit before exiting debug
on system error.
|
| PJ32043 | 22 | TPPFDF recoup statistics needs counters that can handle numbers
of up to 12 digits. Also, ZRECP ONEL REC- might display a space
character for the 1st character of a printable record ID
|
| PJ32045 | 22 | As a result of PJ31107, collection corruption may occur after
cleanup release data chain
|
| PJ32048 | 22 | MSGS ISSUES BY CDBP* DO NOT HAVE STANDARD MSGID PREFIX
|
| PJ32050 | 22 | The TPF Toolkit can incorrectly display listing files found
locally on the workstation as the source view for ASM segments
that are being debugged.
|
| PJ32051 | 22 | ZAPGM displays incorrect data when displaying at the end of the
program using the C-C.
|
| PJ32053 | 22 | A CTL-6E8 from CLM2 may occur during MPLF reconnect processing
or a CTL-704 from CCSONS may occur during MPLF MF1NOHLD
processing.
|
| PJ32058 | 22 | Relax MPLF Lock User Token comparison restriction when
servicing a read message
|
| PJ32061 | 22 | String update in structure / class may update incorrect
location in application ECB.
|
| PJ32064 | 22 | With PJ29600 applied, input TCP/IP messages may not be properly
counted in data reduction.
|
| PJ32065 | 23 | Reduce commit requirements for ZBROW COL EMPTY and ZBROW COL
RECON.
|
| PJ32067 | 22 | The writing of CPSE dump messages may cause excessive strain on
the system.
|
| PJ32070 | 22 | EXPRESSION EVALUATOR SHOULD SUPPORT #DEFINE VALUES
|
| PJ32078 | 22 | ZRPDU DISPLAY, PURGE and OFLMR clear CPFRADM function switch
during PDU Create.
|
| PJ32081 | 23 | A CTL-C system error may occur when the TPF system is flooded
with TCP RSTs.
|
| PJ32085 | 22 | Add socket timeouts to TPF Internet Mail Server when connecting
toa remote server.
|
| PJ32089 | 22 | Issuing ZPSMS PROC DEAC can result in CTL-2D due to APAR PJ30026
|
| PJ32090 | 22 | CTL-4 may occur with PJ31255 applied and application exception
in ECB area.
|
| PJ32091 | 22 | Stepping into an assembler part with a dereferenced pointer in
the variables view can cause a ctrl-4.
|
| PJ32095 | 23 | The first tape mounted on a drive using ZTPLF FILL takes longer
when there are more than 5 paths defined to the drive.
|
| PJ32097 | 22 | ZBROW DISPLAYS MUST USE ZPAGE OR BE THROTTLED
|
| PJ32102 | 23 | After applying PJ30049, CTL-E05 from TPF WebSphere MQ program
CMQS occurs when ZMQSC STOP QMGR is issued and the QMGR is not
defined
|
| PJ32107 | 22 | CTL-4 out of CDB2 when dereferencing a class
|
| PJ32110 | 22 | Provide better diagnostic dump for duplicate release of an MPIF
SWB during MPIF startup.
|
| PJ32111 | 23 | Ctl-3 or Ctl-4 possible when using execute functionality.
|
| PJ32114 | 23 | Various TPF Internet Mail Server Fixes
|
| PJ32116 | 22 | Incorrect minimum count of characters to tape per second in
SEQUENTIAL FILE ACCESS SUMMARY report
|
| PJ32131 | 22 | CPU lists length across all I-stream is incorrect in data
reduction report
|
| PJ32135 | 23 | With PJ29437 applied, the default value for QDPMAXEV is
inconsistent with other platforms for the definition of a local
queue with TPF WebSphere MQ
|
| PJ32137 | 23 | Takes too long to delete PIDS
|
| PJ32138 | 23 | Program error in CPSE following a failed attempt to mount an
ALT tape during dump processing.
|
| PJ32147 | 22 | Replace use of keypoint fields BK0PRIM and BK0CAP by @BRCPP and
LT0PPS.
|
| PJ32153 | 22 | Continuous data collection (CDC) z/TPFDF databases cannot be
captured or restored using z/TPFDF CRUISE.
|
| PJ32157 | 22 | Using Memory view or breakpoints in the debugger can cause
ctrl-3 or ctrl-75.
|
| PJ32160 | 22 | The ZPROT DSP command may report erroneous results when used to
display ownership of a range of tape device addresses.
|
| PJ32161 | 22 | ZDMAP INCORRECT RESPONSE(S)
|
| PJ32166 | 23 | When a write cursor is created on a keyed collection,
OPR-I0200D2 TO2 CURSOR LOGIC ERROR may occur for pre-existing
read cursors.
|
| PJ32170 | 22 | USING to a dsect member doesn't display correctly in assembler
expression
|
| PJ32174 | 22 | Single source updates for macros LREGSC, SREGSC, and SYSRA.
|
| PJ32179 | 22 | Incorrect parameter value displayed when function returns an
object.
|
| PJ32181 | 22 | A CTL-3 dump during IPC restart may result on a system which
has the HPO feature but not the MPIF feature.
|
| PJ32184 | 23 | Pool records lost on deletion and redefinition of local queue
with TPF WebSphere MQ
|
| PJ32187 | 22 | A CTL-571 system error may occur when processing TCP/IP output
messages.
|
| PJ32202 | 23 | With APAR PJ28168 applied, the ZSNMP DISPLAY command may cause
a CTL-3 system error.
|
| PJ32203 | 23 | CTL-4 dump from CMN8
|
| PJ32204 | 23 | A sporadic CTL-3 can occur when running TPFDF data collection.
|
| PJ32211 | 23 | Access exceptions can occur during console lost-interruption
processing
|
| PJ32219 | 23 | A CTL-38 may be issued for a simplex cached unlock on a
duplicate after a ZMCPY UP of the prime module.
|
| PJ32220 | 23 | With APAR PJ30708 applied, programs CDBS, CLTQ, and CMAP, which
all call the inet_ntoa() function, do not display the correct
IP address information.
|
| PJ32223 | 23 | TPF should provide a mechanism to abort tape error recovery if
desired.
|
| PJ32227 | 22 | CTL-581 may occur when tracing a SWISC using a DECB in the
debugger
|
| PJ32228 | 22 | Hang in restart during commit log recovery.
|
| PJ32234 | 23 | OSA-Express system error I007859, could lead to a CTL-1
catastrophic error.
|
| PJ32240 | 23 | Provide SW00SR view in TPF debugger.
|
| PJ32242 | 23 | GENERATE XML MAPPING FILES FOR INPUT DSECTS.
|
| PJ32249 | 22 | Add DASD RM lost IN_PREP re-drive monitor.
|
| PJ32254 | 23 | Recoup may abort during FC33 switching in L/C environment
|
| PJ32255 | 23 | A CTL-6A system error can occur when running IP applications
from a WP subsystem
|
| PJ32256 | 23 | ONLINE POOL GENERATION ERRORS
|
| PJ32257 | 23 | Correct core corruption problem caused by CDC.
|
| PJ32260 | 23 | Error message RECP0656E may erroneously occur.
|
| PJ32267 | 23 | TPF may not send the class of service (COS) control vector
x'2C' with the BIND, which may result in a logical unit (LU)
logon failure with sense code x'0897000A'.
|
| PJ32271 | 23 | Z/OS 1.9 COMPILER SUPPORT
|
| PJ32275 | 22 | CAPT NEEDS TO BE UPDATED TO SPECIFY PUT22 AS PUT LEVEL
|
| PJ32276 | 23 | When TOURC or TWRTC macros (or their C/C++ equivalents) are
issued with no block on the level or DECB specified, a ctl-739
dump is taken in CCSTOR ($DISBC issued by tape code in CEFE).
On big systems, this can be a very large dump and impact system
availability.
|
| PJ32292 | 23 | Restart segment CTKO should save and restore the FSC routing
bits around the call to CDNF. This APAR corrects APAR PJ29380.
|
| PJ32295 | 23 | PJ32038 DISPLAYS THE WRONG FILE ADDRESS.
|
| PJ32296 | 23 | Reserve an area in ECB page 2 for TPF vendors.
|
| PJ32306 | 23 | Channel program conversion results in CTL-38
|
| PJ32307 | 23 | Generated program CSECT name is different from zTPF.
|
| PJ32310 | 23 | CTL-10 in BCPY when merging RCI pseudo directories
|
| PJ32314 | 23 | A CTL-I09400C may occur because prlgc.mac incorrectly sets the
parameter to the stack overflow routine.
|
| PJ32323 | 23 | CTL-4 dump, ADB04 dump, and build issues after applying PJ32070
|
| PJ32340 | 23 | SINGLE SOURCE MACRO SREGSC GENERATES INVALID TAG
|
| PJ32341 | 23 | When PJ32037 is applied, TPF takes a CTL-2 or reports an
inaccurate date warning
|
| PJ32342 | 23 | With PJ27023, Following an IPL TPF Websphere MQ may
inadvertently leave messages on a transmission queue that can
not be removed.
|
| PJ32343 | 23 | CDC Client creates a long-running ECB in program CTS7
|
| PJ32355 | 23 | SYSLOG IS DROPPING MESSAGES AT VOLUMES
|
| PJ32357 | 23 | ZCORO APPLY PROMPT COMES OUT IN S/W IPL
|
| PJ32358 | 23 | Unintended text on the console when stopping continuous data
collection.
|
| PJ32360 | 23 | LOST CHPIDS LEADS TO CTL-C
|
| PJ32367 | 23 | Value of monitored C++ member expressions go to NULL or 'not
allocated'
|
| PJ32368 | 23 | The TPF Debugger may not evaluate sizeof(C/C++ types) or
sizeof(character array variables) correctly.
|
| PJ32370 | 23 | Expanding *this variable causes a ctrl-3.
|
| PJ32373 | 23 | DEFINE GLOBAL VARIABLE FOR PRORGRAM USING STATEMENTS.
|
| PJ32375 | 23 | TPFDF Recoup might hang on primary processor during QUE
processing.
|
| PJ32382 | 23 | OPR-I000DC DUE TO CORRUPTED TPFCS RECORDS
|
| PJ32386 | 23 | After applying PJ29062, messages added to a Websphere MQ queue
specifying MQCI_NONE are incorrectly assigned a new correlation
ID.
|
| PJ32392 | 23 | Getting a CTL-3 dump in cud1 when terminate a debugger session
while examining a system error.
|
| PJ32403 | 23 | Ctl-4 from CDB2 when PJ32179 is applied.
|
| PJ32405 | 23 | PROBLEM WITH APAR PJ32357
|
| PJ32408 | 23 | A CTL-005A catastrophic system error occurs following a dump
which spanned multiple tape volumes.
|
| PJ32412 | 23 | Staging of OSA-Express code changes for a future enhancement
|
| PJ32422 | 23 | PJ32023 C@SOAP HAS /* IN APAR DESC CAUSES ERROR
|
| PJ32429 | 23 | Repair PJ31592 so that CE1ANPR remains set but that 3270
simulation is bypassed for the CSMP0097I message.
|
| PJ32430 | 23 | CTL-I00000E dump out of CVFE
|
| PJ32449 | 23 | When an event times out during a Copy Services command, an
ending timestamp is recorded even though the command did not
complete successfully.
|
| PJ32452 | 23 | Ctl-4 from CDB2 when modifying a character array as a string.
|
| PJ32532 | 23 | Register 5 in segment BRYG is corrupted by APAR PJ32147
|
| PJ32536 | 23 | Due to PJ25589, the ZFILE command may fail to fork when a
wildcard is used.
|
| PJ32540 | 23 | Various inaccuracies in CDC data
|
| PJ32543 | 23 | Ctl-4 from IVAString constructor because of a bad pointer
passed in from IVAStack::setCompileTime processing C/C++ code
or TMSPC stack frame.
|
| PJ32544 | 23 | TPFLDR ABENDS WHEN THE SAL TABLE CANNOT BE FOUND.
|
| PJ32556 | 23 | Reply to unplanned module down IPCs in a coexistence
environment.
|
| PJ32564 | 23 | With PJ32187 applied, a CTL-2 or CTL-571 system error may occur
from corruption of TPF's TCP/IP IP output message queue.
|
| PJ32567 | 23 | Following an error during tape switch processing in CCCPSE, a
CTL-5A catastrophic system error is taken.
|
| PJ32582 | 23 | A CTL-4 may occur in the IVAStack::setCompileTime function in
cudask.cpp when debugging an assembler program.
|
| PJ32621 | 23 | TPF Debugger does not allow the user to stop on source lines in
the ASM source view that are VCONS.
|
| PJ32627 | 23 | Command ZPOOL GENERATION CREATE may take CTL-2E out of DYD3 due
to PJ30266
|
| PJ32633 | 23 | CTL-E2 ON CYCL TO 1052 FROM CJ03
|
| PJ32642 | 23 | With PJ32240 applied, the TPF Debugger does not build without
TPFDF headers available.
|
| PJ32677 | 23 | CTL-4 in CDB2 after applying fixing apar PJ32403
|
| PJ32698 | 23 | TPFXMLGEN generates only ASCII header and lacks usage info.
|
| PJ32699 | 23 | With PJ28303 applied, a CTL-C system error can occur when
closing sockets that have an activate_on_receipt() pending.
|
| PJ32700 | 23 | *this become 'Not Allocated' when monitoring ecbptr at the same
time.
|
| PJ32708 | 23 | Unable to specify unallocated program in the 'stepdebug set'
command when debug application in non-BSS subsystem.
|
| PJ32820 | 23 | DASD data collection needs to be performed for GDS I/Os that
take an incorrect length error.
|
| PJ32872 | 23 | ZPSMS FORCE DEAC message is inaccurate.
|
| PJ32907 | 23 | Due to PJ25880, a CTL-23 system error may occur in positive
feedback segment CUPT.
|
| PJ32919 | 24 | Introduction of support for the IBM Tivoli Monitoring Agent for
z/TPF
|
| PJ32986 | 23 | IPRSE grammar for ZDTCP DNS is not correct.
|
| PJ33005 | 24 | Correct Ctl-E2 errors during Recoup in 1052 State
|
| PJ33006 | 23 | Multiple traces using conditional registration
|
| PJ33012 | 23 | With PJ27028, FTP Server fails to transfer files in passive
mode resulting in zero byte files.
|
| PJ33035 | 23 | With PJ31240, a disabled TPF WebSphere MQ SVRCONN channel
results in an MQSC9998E unexpected channel error 991
|
| PJ33041 | 23 | Possible SSTHLCK lock collision in CJIWEDST due to PJ32360 and
also in CJXCYED due to PJ30852.
|
| PJ33050 | 23 | Overflow in various fields in data reduction reports.
|
| PJ33086 | 23 | PROVIDE SUPPORT FOR TRANSFER VECTOR 0 ON BEGIN MACRO.
|
| PJ33087 | 23 | Applications using TPF Collection Support, especially MQ
applications that use queues defined as COMMON-YES, may appear
to hang following a Recoup run.
|
| PJ33091 | 23 | CTL-571 dumps may occur after CTL-10 dumps.
|
| PJ33092 | 23 | Data reduction may incorrectly report DESTAGE PERCENTAGE
|
| PJ33097 | 23 | The recoup synchronized global record may use a bad fixed file
address when migrating from FARF3 to FARF4 to FARF5.
|
| PJ33107 | 23 | FOR SINGLE-SOURCE, RESTRICT USE OF R15 ON CALLC ON TPF 4.1
|
| PJ33113 | 23 | If an error occurs writing data to the dump tape then
subsequent dumps may be aborted.
|
| PJ33150 | 23 | CTL-69 IN CL22
|
| PJ33172 | 23 | System heap storage may be lost during SSL_aor() processing.
|
| PJ33203 | 23 | DUE TO PJ32271 FCNTL.H CAUSES COMPILER ERROR MESSAGE
|
| PJ33206 | 23 | With PJ28064 applied, locking errors can occur with the TCP/IP
socket block lock.
|
| PJ33207 | 23 | Global corruption may been seen after a dump .
|
| PJ33214 | 23 | With PJ32621 applied, the TPF Debugger TPFSYM offline program
may generate a protection exception on the function rDCDS when
running TPFSYM on certain SYSADATA files. Additionally, the
TPFXMLGEN offline program generates the error text "TPFSYM has
the wrong producer string" when the user attempts to run
TPFXMLGEN.
|
| PJ33228 | 23 | Enhancement to reduce lock contention on the TCP/IP socket
block lock.
|
| PJ33230 | 23 | Compile error in offline code that includes tpfapi.h with
PJ31974 applied
|
| PJ33239 | 23 | When a LU62 CNOS CHANGE or RESET is processed, a CTL-E05 may
occur because data level D got corrupted by CSNB.
|
| PJ33243 | 23 | With PJ27023 applied, TPF WebSphere MQ #IMQCK checkpoint
records are never migrated to a new FARF address format
|
| PJ33252 | 23 | Performance Analyzer SNAP DUMP 74 and CTL-9400C with APAR
PJ31617 applied.
|
| PJ33298 | 23 | Abnormal thread termination may never complete causing SSL to
hang even with PJ31378 applied.
|
| PJ33301 | 23 | ZRTDM MODIFY may incorrectly handle whitespace
|
| PJ33340 | 23 | PNAMC macro needs a nesting level option.
|
| PJ33344 | 23 | CTL-75 out of SSL Daemon.
|
| PJ33351 | 24 | Need to support passing long long, unsigned long long, and
structure parameters from assembler to C
|
| PJ33385 | 23 | CPU utilization can be partially incorrect in data reduction
reports in PR/SM environment
|
| PJ33387 | 23 | When defining an alternate OSA-Express connection, the maximum
transmission unit (MTU) and SWINGD values are not inherited
from the primary OSA connection.
|
| PJ33398 | 23 | With PJ27932 applied, SNMP GETREQUEST commands may fail when
processing the SNMP interface table.
|
| PJ33454 | 23 | ZBROW COL EMPTY DS_DELETED issued in 1052 STATE results in a
I0200C8 system error. Also, PID errors occur when issuing ZBROW
DISP COL ALL.
|
| PJ33472 | 23 | SSL application which issues SSL_aor() function may not get
activated in current activation number.
|
| PJ33477 | 23 | The TPF Debugger may take an ADB01 dump when a user attempts to
debug a C/C++ function that does not contain any executable
lines and is compiled with the HOOK option.
|
| PJ33487 | 23 | CTL-584 may happen with PJ31783 applied.
|
| PJ33490 | 23 | With PJ32242 applied, TPFSYM generates a protection exception
from buildSyms when processing certain programs such as CTOB,
CIKK, and CNMP.
|
| PJ33509 | 23 | With PJ32107 applied, the TPF Debugger may CTL-3 from CDB2 when
C/C++ class member expressions are monitored.
|
| PJ33562 | 23 | A single source parameter is needed on the GETPC macro.
|
| PJ33569 | 23 | TPF Debugger displays incorrect information when hovering over
a variable and in the monitor view.
|
| PJ33576 | 23 | A multi-line message sent in one core block may not have the
CSMP0097I prefix message attached. This problem is apparent
with 3270 console support. This APAR repairs a problem
introduced by APAR PJ30142.
|
| PJ33628 | 23 | MPIF receives Unit Checks (message CTOC0002E) during MPIF
restart using virtual FICON CTC running as a VM user guest.
|
| PJ33633 | 23 | ZBROW COLL COPY COMMIT SCOPE LIMITATIONS
|
| PJ33634 | 25 | Ensure recoup runs on compatible release levels
|
| PJ33635 | 23 | The TPF Debugger may show the disassembly view for C/C++
objects even though the debug information is available.
|
| PJ33639 | 23 | Prevent CTL-E1 or CTL-E2 from CJ00 on cycle down, TO2 LOGIC
dumps when PIDs are deleted. Also, with PJ32633 recoup of TPFCS
datastores may time out.
|
| PJ33646 | 23 | CMQMPP40 Object delivered in PUT 22 was compiled with the wrong
options
|
| PJ33648 | 23 | With PJ32065, ZBROW COLL RECON may fail with CTL-3 and does not
work when index more than 2 levels deep. Also fix collection
delete dump when GFS is off.
|
| PJ33655 | 23 | With PJ30984 applied, a socket with an activate_on_accept()
pending may be posted as an activate_on_receipt().
|
| PJ33667 | 23 | The TPF Debugger global variables may not evaluate mapping
types correctly.
|
| PJ33669 | 23 | With PJ27572, The application protection key is not preserved
over TPF WebSphere MQ API's
|
| PJ33694 | 23 | TPF4.1 deubgger can get CTL-4 IN CUD1 if it is time sliced.
|
| PJ33695 | 23 | Cret table full due to short term pool recycle.
|
| PJ33696 | 24 | Errors adding entries larger than 2010 bytes to sequence
collections. Also fix CTL-200DC, CTL-200E8 dumps from re-use of
old records, and multiple CTL-200E6 dumps.
|
| PJ33719 | 23 | CORRECT CTL-22 OUT OF CYH6 DURING PHASE 3 PROCESSING IN 1052
STATE AFTER AN IPL
|
| PJ33743 | 23 | TPFSYM (TPF Debugger offline program to generate adata) fails
to build after MVS maintenance applied
|
| PJ33757 | 23 | With PJ28435 applied, the MQMD version is ignored when a
message is retrieved from a queue with TPF WebSphere MQ
|
| PJ33776 | 23 | With APAR PJ28267 applied, a MATIP session control block is
prematurely returned and reused after a host name is stopped,
causing MATIP traffic to be incorrectly routed.
|
| PJ33801 | 23 | MPIF may receive an CTL-I000004 processing a MPIFC RTYPE=QUERY
command.
|
| PJ33837 | 23 | Building TPF debugger can get a compilation error when compile
cudago.cpp due to back level imllc.h. Error injected by PJ32642.
|
| PJ33861 | 23 | Following PJ31043, using Secure Socket layer (SSL) may cause
CTL-2, CTL-3 and CTL-4 dumps.
|
| PJ33871 | 23 | Pool directory migration incomplete warning.
|
| PJ33916 | 23 | After applying PJ30387, addressing exceptions may occur in
routine COLILDEV in CSECT CCCPSE when collating I/O trace
entries.
|
| PJ33969 | 23 | Recursive CTL-C can occur while processing DASD read attention
message operations.
|
| PJ33972 | 23 | ZOODB MIGRATE DS fails to migrate all collections in file
system (IFSX) datastore.
|
| PJ34013 | 23 | Due to PJ25589, the ZFILE command may fail to fork when a
wildcard is used.
|
| PJ34015 | 23 | After applying PJ33091 a CTL-3 may occur when issuing a ZDPAT
command
|
| PJ34057 | 23 | With PJ25780, TPF WebSphere MQ attempts to release memory
resulting in OPR-74F.
|
| PJ34066 | 23 | Due to PJ17852 , CTL-1/2/3/4 dumps may occur when CPSA calls
additional segments if the ISOC area has
been corrupted.
|
| PJ34072 | 23 | Receiving multiple state change interrupts (SCI's) on a large
number of DASD modules could lead to a CTL-6DF.
|
| PJ34094 | 24 | Miscellaneous Mail Server Fixes.
|
| PJ34161 | 24 | With APAR PJ25780, TPF WebSphere MQ channel retry may result in
a CTL-3
|
| PJ34199 | 24 | In the TPF Debugger, C/C++ boolean expressions included as a
condition to stopping a breakpoint do not evaluate correctly
causing breakpoints to stop the application or not stop the
application incorrectly.
|
| PJ34254 | 23 | While debugging assembler programs with the TPF Debugger,
ADB15, CTL-75, or other dumps can occur.
|
| PJ34271 | 23 | Correct setting of &BGBASELBL global and enhance the PBASC
macro.
|
| PJ34272 | 23 | In the TPF Debugger, when using the jump feature to a location
that is not valid, the step buttons become disabled.
|
| PJ34336 | 23 | TPF Debugger - Building TPFSYM 4.1 on Linuxtpf
|
| PJ34338 | 23 | Ensure system in SVM before entering UCCLDD user exit
|
| PJ34370 | 23 | With PJ28136, TPF WebSphere MQ using MQSET may result in
CTL-10, CTL-4, CTL-6D9, when also using MQGET or MQPUT on the
same queue.
|
| PJ34371 | 23 | With PJ28435, TPF WebSphere MQ clients disconnecting from
server connection channel (SVRCONN) while using syncpoint may
result in CTL-C101.
|
| PJ34388 | 23 | With PJ29989, degraded PPRC FCP paths are reported as down.
|
| PJ34420 | 24 | Tape module queue length is incorrect following Resetting Event
Recovery, causing a CTL-777 dump.
|
| PJ34431 | 23 | TPF Debugger - Add support to HLASM V1R6 on 4.1 for TPFSYM
|
| PJ34470 | 23 | Cycling from cras state to norm will lead to duplicate entries
in the cretc table.
|
| PJ34471 | 24 | The count of reads and writes for DASD data collection needs to
be incremented for GDS (VSAM) I/Os that take an incorrect
length error.
|
| PJ34517 | 24 | A CTL-3 or CTL-4 dump followed by a CTL-10 may occur when
running SSL servers with multiple SSL daemons and multiple
I-streams.
|
| PJ34595 | 24 | ASSEMBLER PROGRAMS FAIL WITH ERROR ASMA973U
|
| PJ34598 | 23 | With PJ32058, TPF may issue SNAP-1236s before MPLF restart.
|
| PJ34605 | 24 | 1) With PJ27619 applied, INETD servers can be added but not
started by the ZINET START command if the number of servers
exceeds the maximum allowed.
2) With PJ25761 applied, a CTL-4 may occur when entering the
ZINET DISPLAY command to display all the child process IDs of
an INETD Daemon model server, and the server may not be
restarted when the program activation number is changed.
|
| PJ34607 | 23 | Due to PJ29826 errors may occur when the DECB (Data event
control block) is passed to the online minidump
|
| PJ34613 | 24 | Correct various SIP compile and link jobs in gensip.mac
|
| PJ34626 | 24 | A CTL-38 unlock failure or cached unlock failure may occur
after issuing ZAMOD/ZMCPY UP in selectively duplicated
environment.
|
| PJ34629 | 23 | Prevent CTL-1 dumps out of CCISOC when the static storage is
corrupted.
|
| PJ34630 | 23 | TPF Debugger - TPFSYM segment tsydwf.c must be rebuilt with any
TPFSYM updates such that TPFXMLGEN can locate a valid producer
string in the TPFSYM produced ADATA files
|
| PJ34677 | 24 | With PJ33669 applied, calls to TPF WebSphere MQ APIs cause
OPR-EB dumps
|
| PJ34732 | 23 | Running TPF debugger may get a CTL-D4 dump when a bad length
parameter is passed to UDUT_AtoE or UDUT_EtoA function.
|
| PJ34758 | 23 | Macro Breakpoint hit in C/C++ program can cause the debugger
client to hung.
|
| PJ34776 | 24 | With PJ19176, FIXEDOVERFLOW or ZERODIVIDE conditions might
occur in JRA3
|
| PJ34807 | 23 | CAPT NEEDS TO BE UPDATED TO SPECIFY PUT23 AS PUT LEVEL
|
| PJ34984 | 24 | z/TPF ZRPFC needs a TPF4.1 program to receive SIPCC requests
for coexistence.
|
| PJ35021 | 24 | A CTL-4 dump could occur after ZRECP ABORT command.
|
| PJ35022 | 24 | PJ30352 may cause adjusted CPU utilization to be too high.
|
| PJ35043 | 24 | With APAR PJ25780, TPF WebSphere MQ incorrectly processes
messages sent over the MQ Routc bridge
|
| PJ35192 | 24 | With PJ28435, WebSphere MQ channels erroneously allow messages
which exceed the maximum message length (MAXMSGL) attribute of
the channel.
|
| PJ35220 | 24 | The program name listed for OPR-1CA is misleading.
|
| PJ35226 | 24 | Repeating CEFR0204E mesages caused CTL-C NO ECB'S during DDR
abort on a 3590 tape drive.
|
| PJ35242 | 24 | Channel error on FDCTC did not remove bad path.
|
| PJ35324 | 24 | TPF Debugger dumps with CTL-4 when entering ASM segment in DLL. |
| PJ35360 | 24 | Most PDU excluded pools are being marked as lost address
|
| PJ35382 | 24 | Control Program generated WTOPC messages issued during a Loader
General File IPL may be displayed with extraneous text appended
to them.
|
| PJ35445 | 24 | MPLF messages for MPLF lock partition 2 may be erroneously
discarded.
|
| PJ35454 | 24 | Large messages requiring more than 100 chained blocks in
Websphere MQ Bridge support may result in a 000004 or 0000D2 in
CUIM or CUIS.
|
| PJ35499 | 24 | After applying PJ31240, excessive ECBs can be created to issue
a heartbeat on a Websphere MQ sender channel.
|
| PJ35510 | 25 | Frequent buildup in VCT and DEFER lists during data collection
on system with multiple i-streams.
|
| PJ35591 | 24 | With PJ28435, Websphere MQ command ZMQSC DISP CHL may fail if
issued below NORM with CTL-E2. With PJ32633, it may fail with
CTL-4 or CTL-2D instead.
|
| PJ35626 | 24 | With APAR PJ32131 minimum/maximum CPU lists lengths are
incorrect.
|
| PJ35653 | 24 | Data reduction MPIF reports can be incorrect.
|
| PJ35717 | 24 | With PJ26156, turning off Websphere MQ trace for queues or
channels is lost over an IPL.
|
| PJ35773 | 24 | The SWB associated with the event is not released if a signal
is received before tpf_sawnc() gets control.
|
| PJ35802 | 24 | The ACRS0064I validation message is occasionally mis-routed to
the current Prime CRAS during manual fallback validation of the
Prime CRAS.
|
| PJ35827 | 24 | In the TPF Debugger with PJ32240 applied, the SW00SR view may
show incorrect information for subsystem unique DBDEFs.
|
| PJ35846 | 24 | A CTL-38 Undefined Mod Down or CTL-1 from CCSONS(CJIC) can
happen when all mods on a DASD subsystem are taken down and
some mods are part of a non-BSS subsystem.
|
| PJ35855 | 24 | A CTL-3 may occur in CLM2 or CYGN and may lead to a complex
outage if an unplanned module down is completed during MPLF
lock recovery.
|
| PJ35911 | 24 | In the TPF Debugger, an ADB05 dump can occur if the debugger
detects a possible infinite loop in the application.
|
| PJ35950 | 24 | Corrects various issues with OSA-Express and TCP/IP native
stack support.
|
| PJ35999 | 24 | Intervention required condition on a 3590 drive causes device
queue to hang.
|
| PJ36060 | 24 | TPF WebSphere MQ Trace output from an ASCII system does not
convert the underscore character.
|
| PJ36064 | 24 | Errors in data reduction when printing distribution and plot
reports.
|
| PJ36137 | 24 | Data reduction fails with ONCODE=22
|
| PJ36153 | 24 | With PJ31240, WebSphere MQ incorrectly sends data messages
while awaiting a reply to a Heartbeat
|
| PJ36155 | 24 | The TPF Debugger displays message DBUG9020E when changing the
value of a register
|
| PJ36170 | 24 | SIZE and SUBSCRIPTRANGE conditions in data reduction
|
| PJ36227 | 24 | With PJ25780 applied, a CTL-4 dump can occur while running
comms trace with TPF WebSphere MQ
|
| PJ36293 | 24 | PJ26516 did not allow APACHE programs whose names start with
CHT* to time out.
|
| PJ36307 | 24 | Interleaving MPLF lock recovery and unplanned module down
processing may cause a system outage.
|
| PJ36423 | 24 | NEWTRNAME PARAMETER NEEDED ON PNAMC MACRO.
|
| PJ36453 | 24 | With PJ31240 applied, TPF WebSphere MQ sender channels with a
12 digit LOCALIP may fail to start
|
| PJ36485 | 24 | POSSIBLE OPR-412F5 DUMPS FROM RECOUP
|
| PJ36486 | 24 | An OPR-200DC/OPR-200E6 may occur during Recoup.
|
| PJ36487 | 24 | ZDFCT shows incorrect device type for records on device D
|
| PJ36572 | 24 | With PJ31240, TPF WebSphere MQ receiver channels receiving a
batch heartbeat results in a CTL-C101
|
| PJ36579 | 24 | FIXES FOR RCP CLOSING DURING ABORT PROCESSING
|
| PJ36704 | 25 | Insufficient heap space availability results in WebSphere MQ
009300 dumps during sweep.
|
| PJ36711 | 25 | FIXEDOVERFLOW condition in jra2.pli when processing data for
USER TOTALS report
|
| PJ36734 | 24 | Fix code defect in PJ32249 and add user area to ECB page 2
header.
|
| PJ36747 | 25 | The return code may not be properly set up when a socket is
cleaned up that has an activate_on_receipt_of_TCP_message or
activate_on_receipt_of_TCP_message2 pending.
|
| PJ36748 | 25 | Fixes for Monitoring Agent for z/TPF run-time error and CDC
historical data in a DB2 database
|
| PJ36756 | 25 | A CTL-700 may happen in restart if an interrupt for the Sysplex
Timer is taken.
|
| PJ36777 | 25 | Initiate MPLF lock recovery if MPLF return code 30 or 32 is
received on a DASD subsystem containing only non-real-time
modules.
|
| PJ36800 | 25 | Transmit queue name is not included in the 'Channel Stopped'
event message.
|
| PJ36838 | 24 | ZDMAP F- display for member functions within a class does not
work.
|
| PJ36877 | 24 | In the TPF Debugger with PJ30039 applied, local variables in a
C/C++ function may become "Not Allocated" in the monitors or
variables view while stepping through a function with the
object compiled with the V2R10 compiler.
|
| PJ36881 | 24 | With PJ31525, applications using MQ COMMON-YES queues have a
greater chance of slowing down after recoup. Also, with PJ33087
CTL-6DF may occur after recoup.
|
| PJ36882 | 24 | With PJ30039 applied, using TPF Debugger Variables or Monitor
view can show the incorrect values for fields in a structure
within a structure passed by reference. Also applies to classes.
|
| PJ36893 | 25 | TPF may accept messages from terminals logged into applications
other than SMP, if system is state-change-disabled.
|
| PJ36913 | 25 | Prevent recoup errors in the MQ datastore following a sweep.
Eliminate extraneous RECP0786E errors when processing
collections with zero length elements.
|
| PJ36938 | 24 | With TPF Toolkit 3.4 installed and using the TPF Debugger with
the stop at all function entries feature, running the
application to completion can cause an ADB05 dump.
|
| PJ36940 | 25 | Prevent CTL-D9 deadlock condition out of CJ00 when collections
are deleted from a datastore that uses an inventory.
|
| PJ36941 | 25 | A CTL-704 catastrophic dump may occur during deactivation of
another processor if host becomes queued for VFA
synchronization lock on a find and hold operation.
|
| PJ36974 | 24 | CAPT NEEDS TO BE UPDATED TO SPECIFY PUT24 AS PUT LEVEL
|
| PJ36988 | 25 | Correct multiple use of BL0ECB
|
| PJ37029 | 25 | With PJ30936 applied, a CTL-75 or OPR-4 system error may occur
out of the tpf_xml_parseDocument API.
|
| PJ37063 | 25 | Catastrophic CTL-38 possible during copy.
|
| PJ37064 | 25 | WebSphere MQ may result in a CTL-3 if an acknowledgement is
received for a sender channel and the transmission queue is
corrupted or non-existent.
|
| PJ37067 | 25 | With PJ28097 applied, various problems could occur while
generating pools online or running recoup.
|
| PJ37070 | 25 | With PJ28758 applied, running ZMQSC CAPTURE for TPF WebSphere
MQ may cause the next recoup run to report lost addresses
|
| PJ37086 | 25 | MATIP input packets are not checked for a valid header.
|
| PJ37088 | 25 | The SSL_renegotiate() function must be disabled because a
vulnerability in the Secure Sockets Layer (SSL) and Transport
Layer Security (TLS) protocols has been identified in the
renegotiation process.
|
| PJ37097 | 25 | With APAR PJ26873 applied, MQ bridge does not send chained
messages to the remote MQ application, causing the application
to fail on occasion.
|
| PJ37262 | 25 | A CTL-C system error may occur when streaming SNAPC system
errors occur and system resources are low.
|
| PJ37289 | 25 | After applying PJ30387, only the first 2K LDEVs are cleared
during CIO initialization, leading to unpredictable results.
|
| PJ37298 | 25 | Multiple issues in APAR PJ35510
|
| PJ37301 | 25 | CTL-3 in module CDCP segment cdcr.asm
|
| PJ37318 | 25 | NEED SINGLE-SOURCE ABILITY TO HIDE z/TPF PACKED ATTRIBUTE
|
| PJ37320 | 25 | Incorrect values or FIXEDOVERFLOW condition in USER TOTALS
report.
|
| PJ37428 | 25 | Due to PJ21167, isssuing MOVEC to move data from an SVM address
to system heap may result in a CTL-6EE system error.
|
| PJ37446 | 25 | Commit scope active ECB count is incorrect
|
| PJ37480 | 25 | CTL-4 FROM SEGMENT COTA WHEN HANDLING 3590 EREP DATA.
|
| PJ37481 | 25 | Due to PJ27393, CPSE may hang when the DECB is corrupted.
|
| PJ37550 | 25 | A command entered from a 3270 PRC or 3270 local terminal may
not be presented to the system if an unsolicited message is
sent to the terminal prior to pressing .
|
| PJ37677 | 25 | With PJ29750 applied, TPF WebSphere MQ checkpoint may remove
expired messages from a queue during sweeping, resulting in a
CTL-3
|
| PJ37693 | 25 | FIXEDOVERFLOW condition in SUM_PERFORMANCE function in JRF6
|
| PJ37703 | 25 | CTL-4 issuing a rsysc from cdct.c
|
| PJ37729 | 25 | With PJ29192, a CTL-3 may occur when starting a WebSphere MQ
sender channel.
|
| PJ37749 | 25 | With PJ27023, The WebSphere MQ delete monitor may leave the
delete pending bit on which may prevent the queue deletion from
completing.
|
| PJ37790 | 25 | CTL-3 from ZDMAP after applying PJ32161 due to incorrect apedit
instructions.
|
| PJ37882 | 25 | With PJ37749, TPF WebSphere MQ segment CMQMGR will not compile.
|
| PJ38013 | 25 | Enhance the LREGSC and SREGSC macros.
|
| PJ38023 | 25 | Message "COSK0376E: DEVICE TYPE UNKNOWN FOR DEVICE cuu"
received during tape restart.
|
| PJ38060 | 25 | The Program Command Routing Service (PCRS) assembler interface
(PCRSC) is not implemented as documented.
|
| PJ38090 | 25 | With PJ27785, a CTL-C outage may be caused by a looping C13D
dump condition from CL4A.
|
| PJ38108 | 25 | Automount of an ALT tape does not complete when new tape is
loaded if Tape Status Table entry was seized.
|
| PJ38180 | 25 | Infrastructure for asynchronous attention message type 7 on
record cache subsystem (RCS) systems.
|
| PJ38197 | 25 | MPIF may take a CTL-C dump due to a wrapping sequence number
problem.
|
| PJ38198 | 25 | UNABLE TO BUILD CDEC DUE TO C++ COMMENT USAGE (//)
|
| PJ38361 | 25 | Assembler errors may occur when trying to assemble an
application that contains Structured Programming Macros (SPMs)
with expressions that are greater than 32 characters long.
|
| PJ38368 | 25 | With PJ29024 applied, building object cudaob.o for the TPF
debugger can result in a compile error.
|
| PJ38371 | 25 | Support coexistence on recovery log takeover.
|
| PJ38621 | 26 | SPM macro #LOCA does not enforce halfword boundary which may
cause an ASMA212W assembler warning.
|
| PJ38671 | 26 | TPFAR support for the zOS DB2 Version 9 precompiler
|
| PJ38708 | 26 | ZFILE is erroneously allowing execution of files without the
required SHA-BANG characters.
|
| PJ38764 | 26 | An OPR-9F7 dump may occur in TPF restart during fresh load of
SNA tables after decreasing the
MAXRVT parameter of keypoint 2 and doing a fresh OSTG load.
|
| PJ38813 | 26 | TPF may tear down socket with a reset (RST) when old data is
received for a socket that the TPF application already issued a
close for.
|
| PJ38883 | 26 | Automatic fallback of the 3215 PRC may result in a CTL-1 when
attempting to return to the original PRC.
|
| PJ38902 | 26 | Due to PJ27186 we need to improve the dump process under shared
PR/SM or VM.
|
| PJ38939 | 26 | With PJ31240, WebSphere MQ Fast Sender channels
(NPMSPEED-FAST), that send only non-persistent messages and
have Heartbeat (HBINT) support active may result in connection
broken.
|
| PJ38985 | 26 | ZMCPY can cause prime/dupe mismatch and unheld locks in a
loosely coupled environment.
|
| PJ38991 | 26 | OPR-693 Incorrect file address encountered when keypointing
directory(CYC3).
|
| PJ39071 | 26 | Incorrect DASD I/O rates reported by continuous data collection
during module copy
|
| PJ39144 | 26 | When sharing sockets across multiple ECBs, ECBs may get hung
waiting on an event while processing an accept, a send type, or
a read type API.
|
| PJ39150 | 26 | CTL-2 using performance analyzer
|
| PJ39383 | 26 | Due to PJ27393, when using the CREEC macro with DECBs,
parameter data is not correctly passed to the new ECB.
|
| PJ39613 | 26 | A CTL-3 dump may occur if ZRECP RESTART is entered while ZRECP
NOREBUILD is in progress.
|
| PJ39704 | 26 | Data event control block (DECB) corruption may cause a TPF
image to hang.
|
| PJ39731 | 26 | Support special STP configuration.
|
| PJ39809 | 26 | CTL-230 dump out of CPSI may occur if a SNAPC dump is taken by
an ECB that has a corrupted subsystem or subsystem user ID.
|
| PJ39842 | 26 | Websphere MQ Checkpointing may result in a CTL-6DB dump when
deactivating a processor in a loosely coupled complex.
|
| PJ39864 | 26 | A large BCA use count can cause unpredictable and catastrophic
results if interpretted as a negative number.
|
| PJ39884 | 26 | With PJ28758 applied, a WebSphere MQ sender channel will not
retry if the channel can not bind to the LOCLADDR in the
channel definition.
|
| PJ40074 | 26 | A dump may occur from BLOG when deactivating a processor.
|
| PJ40176 | 26 | Due to PJ38991, short term pool directories may be keypointed
to #SONRI instead of #STPKP.
|
