Document control page
Use this information to track changes between versions of this guide.
Document version |
Publication date |
Comments |
---|---|---|
SC23-6003-00 |
October 10, 2007 |
First IBM publication. |
SC23-6003-01 |
December 29, 2007 |
VRM number updated. Summary table updated. Note about the lack of support for V3 privacy on the Windows version of the probe removed. The Windows version of the probe now supports V3 privacy and authentication. List of supported traps and informs clarified. List of statistics logged by the probe updated. Tip about setting the TrapQueueMax property to avoid dropping events during a trap burst added. |
SC23-6003-02 |
July 25, 2008 |
Support for Linux® for zSeries added. IPv6 support information added. Information about the compatibility of the probe with Federal Information Processing Standards (FIPS) added. |
SC23-6003-03 |
April 30, 2009 |
Support for the Configuration Analyser added. Summary section updated. Installing the probe topic added. Installing the Configuration Analyser topic added. Configuring the probe environment topic updated. Running the Configuration Analyser topic added. |
SC11-7728-00 |
November 6, 2009 |
Functionality added to enable the probe to perform additional processing on rules files. |
SC11-7728-01 |
July 1, 2011 |
FIPS compatability statement added to Summary. Installation section replaced by Installing probes. Prerequisites information added to Running the probe as suid root. SNMP |
SC11-7728-02 |
July 6, 2012 |
Changes made to enable you configure the probe to meet the Common Criteria assurance level of EAL4+. The Common Criteria version of this guide is available from the IBM Passport Advantage website. |
SC11-7728-03 |
November 30, 2012 |
Added note regarding Common Criteria version of this probe to SNMP. Added Firewall considerations. Added information on properties that define the locations of the mttrapd.conf file and the hashed file to Adding new users to the configuration file. Enhanced Example configuration. SNMP Added Managing the SNMP agent over the probe's HTTP/HTTPS interface. Added DSALogs and DSAPeriod properties to Properties and command line options. Updated Error messages. Added Known Issues. |
SC11-7728-04 |
March 14, 2013 |
Add information on get and set functions for SNMP V2c and V3 to Rules file processing. Updated Managing the SNMP agent over the probe's HTTP/HTTPS interface to include get and set commands for SNMP V2c and V3. Updated Static elements to include the elements specific to remotely managing the SNMP agent over HTTP/HTTPS. Updated the Summary and Known Issues to include information on IPv6 support on the Microsoft Windows operating system. Updated Error messages. |
SC11-7728-05 |
July 5, 2013 |
Added Configuration files, Probe properties, Defining the startup behavior, and Probe initialization to SNMP V3 support. Updated Adding new users to the configuration file in SNMP V3 support. Added ReuseEngineBoots, SnmpConfigChangeDetectionInterval and UsmUserBase properties to Properties and command line options. Updated Running the probe as suid root. Fixes: Version 16 of the SNMP Probe includes fixes for the following APARs:
|
SC11-7728-06 |
November 8, 2013 |
Updated Configuration files, Probe properties, Adding new users to the configuration file, and Probe initialization in SNMP V3 support. Updated Paths used by the probe and added Logging lost traps in Data acquisition. Updated Error messages. Updated Running the probe as suid root in Running the probe. Fixes: Version 17 of the SNMP Probe includes fixes for the following APARs:
|
SC11-7728-07 |
January 24, 2014 |
Topics added: Limiting processing to SNMP V3 only Minimum security level for trap processing Support for Unicode and non-Unicode characters Topics updated: NoNameResolution, snmpv3ONLY, SocketSize, and TrapQueueMax in Properties and command line options Fixes: Version 18 of the SNMP Probe includes fixes for the following APARs:
|
SC11-7728-08 |
December 11, 2014 |
Summary updated. Monitoring flood conditions at IP addresses added. Description for the TrapStat property added to Properties and command line options. Error messages and ProbeWatch messages updated. Fixes: Version 19 of the SNMP Probe includes fixes for the following APARs:
|
SC11-7728-09 |
March 12, 2015 |
Summary updated. Writing resolved host names and discarded host names to flat files added. Description for the following properties were added to Properties and command line options:
Error messages updated. Fixes: Version 20 of the SNMP Probe includes fixes for the following APARs:
|
SC11-7728-10 |
June 30, 2016 |
Troubleshooting added. |
SC11-7728-11 |
November 24, 2016 |
|
SC11-7728-12 |
June 28, 2019 |
The following topics updated to clarify the usage of the mttrapd.conf file: |
SC11-7728-13 |
October 31, 2019 |
Guide updated for version 21 of the SNMP Probe. Summary updated. Support for the Configuration Analyser deprecated. References to the Configuration Analyser and mttrapd_check.jar removed. The following topics added: Description for the following properties were added to Properties and command line options:
Fixes and enhancements: Version 21 of the SNMP Probe includes fixes for the following APARs:
This version of the probe also includes the following enhancements:
|
SC11-7728-14 |
October 30, 2020 |
Guide updated for version 22 of the SNMP Probe. Summary updated. Fixes: Version 22 of the SNMP Probe includes fixes for the following APARs:
|