Explanation
This message is the first in a group of messages.
A complete description of the message group follows.
IST718I ADDRESS INVALID FOR NETID=cdrmnetid CDRM=cdrmname CODE=X'code'
IST719I {SUBAREA subarea ELEMENT el|ADJNET netid ADJNETSA adjnetsa ADJNETEL el} [GWN gwn]
[IST1421I nodetype resourcename HAS DUPLICATE ADDRESS]
IST314I END
IST718I - This message is issued during activation of the CDRM major node
when the specified address (adjacent network netid,
subarea subarea, element el)
of cdrmname could not be defined.
- cdrmnetid is the network identifier for cdrmname.
- cdrmname is the name of the cross-network CDRM
minor node.
- code is the return code resulting from the
attempt to define the network address. Possible return codes (expressed
in hexadecimal) are:
- 04
- Invalid address
- 10
- Duplicate address
- 20
- Insufficient storage
- 28
- Address management error
IST1421I - This message is issued when VTAM® detects
a duplicate address for the CDRM minor node.
- nodetype is the node type of resourcename.
See Node and ID types in VTAM messages for a description of nodetype.
- resourcename is the name of the cross-network
CDRM minor node that is currently defined to the address in question.
The form of resourcename is netid.name.
System action
Operator response
Action depends on value for
code:
- 04
- Save the system log for problem determination.
- 10
- Save the system log for problem determination.
- 20
- Issue the DISPLAY BFRUSE command to display information about
the common service area (CSA). Issue the DISPLAY STORUSE command to
display storage usage for storage pools. Total VTAM private storage information is displayed
in message IST981I. If message IST981I does not appear in the display,
you might need to reissue the DISPLAY STORUSE command, specifying
a higher value for the NUM operand. Save the system log for problem
determination.
- 28
- Save the system log for problem determination.
System programmer response
The indicated address could not be
added to VTAM’s address
structure because of the reasons specified.
- 04
- Check your network address assignments.
- 10
- Check your network address assignments.
- 20
- Examine your storage allocation and increase storage as required.
- 28
- This code indicates that a VTAM error
has occurred in managing the address directory.
Take the following
actions:
- If you have access to IBMLink, search for known problems with similar
symptoms. If no applicable matches are found, report the problem
to IBM® by using the Electronic
Technical Report (ETR) option on IBMLink.
- If you do not have access to IBMLink, report the problem to the IBM software support center.
See the section on non-VTAM problems, in
the z/OS Communications Server: SNA Diagnosis Vol
1, Techniques and Procedures for additional problem determination actions.
Routing code
Descriptor code