Explanation
This message is the first in a group of messages
that VTAM® issues in one of
the following situations:
- In response to a VARY ACT,LOAD=YES or LOAD=U command for an NCP
when the disk operations associated with the VARY ACT were not performed.
- In response to a VARY ACT command for an NCP that specified LOADFROM,
SAVEMOD, or DUMPLOAD for NCP ncpname.
- In response to a MODIFY LOAD command for an NCP when the MODIFY
LOAD request was not executable.
A complete description of the message group follows.
IST567I command OF loadmodname FOR ncpname status
IST523I REASON = reason
See Command and RU types in VTAM messages for a description of command.
loadmodname is
the name of the load module being affected. If unknown, loadmodname is ***NA***.
ncpname is
the name of the NCP.
status is one of the
following:
- CANCELED
- COMPLETE
- FAILED
- NOT PERFORMED
reason is one of the following:
- ALREADY LOADED
- The VARY ACT command continues; the communication controller was
already loaded.
- CANCEL IN PROGRESS
- A MODIFY LOAD (any ACTION type) command was entered and VTAM was currently processing a
CANCEL request for the same NCP. The CANCEL must complete before
a subsequent MODIFY LOAD can be entered.
- CANCELED BY OPERATOR
- A request to cancel a load that was in progress with a MODIFY LOAD,ACTION=CANCEL
command has completed.
- CONTROLLER DISK OPTION UNAVAILABLE
- The VARY ACT command failed because the controller does not support
disk functions.
- DISK/HARDWARE ERROR
- The VARY ACT command failed because of a disk or hardware error.
- DISK FUNCTIONS NOT PERFORMED
- INITEST=YES was specified on the PCCU definition statement for
a non-3705 communication control unit. Although the load was performed,
the VARY ACT command failed.
- DISK RESOURCE TEMPORARILY UNAVAILABLE
- The hardware resource is temporarily unavailable.
- DUPLICATE LOAD MODULE ON DISK
- A MODIFY LOAD,ACTION=ADD command was entered and there was already
a load module on the disk with the same name.
- ESTIMATED IPL in 5 MINS OF ANOTHER LOADMOD
- The MODIFY LOAD command failed because another load module on
the MOSS disk has an IPL scheduled for the same time as the IPL you
requested.
- FUNCTION NOT SUPPORTED
- A MODIFY LOAD command was entered and it is not supported by the
NCP.
- INITIAL TEST INVALID FOR CCU
- INITEST=YES was specified on the PCCU definition statement for
a non-3705 communication control unit.
- IPLTIME MORE THAN 90 DAYS FROM CURRENT DATE
- A MODIFY LOAD command failed because the specified IPLTIME is
more than 90 days from the current date.
- keyword time EARLIER THAN
SYSTEM TIME
- A MODIFY LOAD command failed.
keyword is
either
IPLTIME or
NOTIFY and indicates why the command
failed.
- IPLTIME
- VTAM cannot schedule an
IPL because the requested IPL time is earlier than the current system
time.
- NOTIFY
- VTAM cannot schedule an
IPL because the time at which notification was requested is earlier
than the current system time. For example, if you attempt to schedule
an IPL 30 minutes from now and ask to be notified 60 minutes before
the IPL occurs, the MODIFY LOAD command fails, and VTAM issues this message.
If the values for both IPLTIME and NOTIFY
are not valid, VTAM issues
this message only once. The value of keyword is IPLTIME.
The time value
specifies when an IPL or a notification was requested. See DATE and TIME formats for information about the time value.
- LOAD IN PROGRESS
- A MODIFY LOAD,ACTION=ADD|REPLACE|PURGE command was entered and VTAM was in the process of another
load for the same NCP. Only one load can be processed at a time.
- LOAD NOT IN PROGRESS
- A MODIFY LOAD,ACTION=CANCEL command was entered to cancel a load
in progress and there was no load in progress.
- NO IPL SCHEDULED FOR LOAD MODULE load_module
- A MODIFY LOAD command failed. A scheduled IPL is not currently
set for this module.
- NO ROOM ON DISK
- One of the following happened:
- A MODIFY LOAD,ACTION=ADD command was entered, and the disk was
already full.
- A MODIFY LOAD,ACTION=REPLACE command was entered, and load module loadmodname was
not on the disk. There is not enough room on the disk to add the additional
load module.
- REQUESTED FILE NOT FOUND
- The command failed because one of the following occurred:
- The operator entered a VARY ACT command specifying the LOADFROM=HOST
operand. VTAM could not find
NCP load module loadmodname on the host.
- The operator entered a VARY ACT command specifying the LOADFROM=EXTERNAL
operand. VTAM could not find
NCP load module loadmodname on the hard disk of
the communication controller.
- The operator entered a MODIFY LOAD command specifying the ACT=PURGE
operand. VTAM could not find
load module loadmodname on the hard disk of the
communication controller.
- RU LENGTH ERROR
- The MODIFY LOAD operation was halted because the NCP rejected
the IPLINIT RU. This indicates that the NCP is not the correct level
to process MODIFY LOAD commands.
- SSP NOT CORRECT LEVEL
- The controller (CCU), NCP, or SSP does not support the function
requested. An NCP release prior to NCP V5R2 cannot be loaded with
the LOADFROM, SAVEMOD, or DUMPLOAD operands. These operands are valid
only for NCP V5R2 or a later release. The command failed.
System action
See the preceding explanation of reason for
the system action. Other processing continues.
Operator response
If
reason is:
- CANCELED BY OPERATOR
- No action is required. This an informational message only.
- DISK RESOURCE TEMPORARILY UNAVAILABLE
- Try the request again.
- DUPLICATE LOAD MODULE ON DISK
- Try the command again, using the ACTION=REPLACE option of the
MODIFY LOAD command instead of the ACTION=ADD option.
- ESTIMATED IPL in 5 MINS OF ANOTHER LOADMOD
- Enter a DISPLAY DISK command to determine the IPL times scheduled
for all the load modules on the MOSS disk. Change the value of ipltime accordingly
and reenter the command.
- IPLTIME MORE THAN 90 DAYS FROM CURRENT DATE
- Reenter the command with a date fewer than 90 days from the current
date.
- keyword time EARLIER THAN
SYSTEM TIME
- Correct the time parameter and reenter the
command. See z/OS Communications Server: SNA Operation for more information.
- LOAD IN PROGRESS
- Wait until the current load operation completes, then try the
command again.
- LOAD NOT IN PROGRESS
- No action. There was no operation in progress to cancel.
- NO IPL SCHEDULED FOR LOAD MODULE load_module
- No action is required. This is an informational message only.
- NO ROOM ON DISK
- Enter a MODIFY LOAD,ACTION=PURGE command to delete an unneeded
load module from the disk. Enter a DISPLAY DISK command to examine
the contents of the disk.
- REQUESTED FILE NOT FOUND
- Follow the procedures set up by the system programmer.
- RU LENGTH ERROR
- Save the system log for problem determination.
- SSP NOT CORRECT LEVEL
- Save the system log for problem determination.
Otherwise, follow defined procedures for
hardware problems.
System programmer response
- If reason is RU LENGTH ERROR, ensure
that the NCP is at the correct level.
- If reason is SSP NOT CORRECT LEVEL,
ensure that the NCP, SSP, and CCU are at the correct level. To use
the LOADFROM, SAVEMOD, and DUMPLOAD operands on the VARY ACT command,
the NCP must be NCP V5R2 or a later release, and the SSP must be SSP
V3R4 or a later release.
- For all other reasons, there is no additional
suggested action.
Routing code
Descriptor code