VTAM® issues this message as part of a group of messages in response to a DISPLAY EE command for aggregate Enterprise Extender connection information. This message is the first in a group of messages. This message group is displayed when the DISPLAY EE command is issued and only a local IPADDR or a local HOSTNAME is supplied as input. The output information is the aggregate of all Enterprise Extender connections associated with the local IPADDR or local HOSTNAME. When LIST=DETAIL is specified, five optional message subgroups, beginning with the IST2030I subgroup and ending with the IST2034I subgroup, are displayed for each port priority. The full description of the message group follows:

 IST2002I ENTERPRISE EXTENDER AGGREGATE CONNECTION INFORMATION
[IST2119I ENTERPRISE EXTENDER DISPLAY CORRELATOR: correlator]
 IST924I -------------------------------------------------------------
 IST1680I type IP ADDRESS ip_address
[IST1910I LOCAL HOSTNAME value]
[IST1911I value]
[IST2004I LIVTIME = (init_value,max_value) SRQTIME = srqtime SRQRETRY = srqretry]
 IST2009I RTP PIPES = rtppipes       LU-LU SESSIONS      =  sessions
 IST2010I INOPS DUE TO SRQRETRY EXPIRATION                = inopcount
[IST1324I VNNAME = vnname            VNGROUP = vngroup vntype      ]
[IST2011I          AVAILABLE LINES FOR THIS EE VRN       = vrnlines ]
[IST2012I          ACTIVE CONNECTIONS USING THIS EE VRN  = vrnconns ]
 IST2013I AVAILABLE LINES FOR PREDEFINED EE CONNECTIONS   = predeflines
 IST2014I ACTIVE PREDEFINED EE CONNECTIONS                = predefconns
 IST2015I ACTIVE LOCAL  VRN EE CONNECTIONS                = lvrnconns
 IST2016I ACTIVE GLOBAL VRN EE CONNECTIONS                = gvrnconns
[IST2043I TOTAL ACTIVE EE CONNECTIONS FOR LOCAL HOSTNAME = totconns ]
[IST2044I TOTAL ACTIVE EE CONNECTIONS FOR LOCAL IPADDR   = totconns ]
[IST924I -------------------------------------------------------------]
[IST2030I PORT PRIORITY = SIGNAL ]
[IST2036I   NLPS SENT           = nlps_sent          ( estimate ) ]
[IST2037I   BYTES SENT          = bytes_sent         ( estimate ) ]
[IST2038I   NLPS RETRANSMITTED  = nlps_retransmitted ( estimate ) ]
[IST2039I   BYTES RETRANSMITTED = bytes_retransmitted( estimate ) ]
[IST2040I   NLPS RECEIVED       = nlps_received      ( estimate ) ]
[IST2041I   BYTES RECEIVED      = bytes_received     ( estimate ) ]
[IST924I -------------------------------------------------------------]
[IST2031I PORT PRIORITY = NETWORK]
[IST2036I   NLPS SENT           = nlps_sent          ( estimate ) ]
[IST2037I   BYTES SENT          = bytes_sent         ( estimate ) ]
[IST2038I   NLPS RETRANSMITTED  = nlps_retransmitted ( estimate ) ]
[IST2039I   BYTES RETRANSMITTED = bytes_retransmitted( estimate ) ]
[IST2040I   NLPS RECEIVED       = nlps_received      ( estimate ) ]
[IST2041I   BYTES RECEIVED      = bytes_received     ( estimate ) ]
[IST924I -------------------------------------------------------------]
[IST2032I PORT PRIORITY = HIGH  ]
[IST2036I   NLPS SENT           = nlps_sent          ( estimate ) ]
[IST2037I   BYTES SENT          = bytes_sent         ( estimate ) ]
[IST2038I   NLPS RETRANSMITTED  = nlps_retransmitted ( estimate ) ]
[IST2039I   BYTES RETRANSMITTED = bytes_retransmitted( estimate ) ]
[IST2040I   NLPS RECEIVED       = nlps_received      ( estimate ) ]
[IST2041I   BYTES RECEIVED      = bytes_received     ( estimate ) ]
[IST924I -------------------------------------------------------------]
[IST2033I PORT PRIORITY = MEDIUM ]
[IST2036I   NLPS SENT           = nlps_sent          ( estimate ) ]
[IST2037I   BYTES SENT          = bytes_sent         ( estimate ) ]
[IST2038I   NLPS RETRANSMITTED  = nlps_retransmitted ( estimate ) ]
[IST2039I   BYTES RETRANSMITTED = bytes_retransmitted( estimate ) ]
[IST2040I   NLPS RECEIVED       = nlps_received      ( estimate ) ]
[IST2041I   BYTES RECEIVED      = bytes_received     ( estimate ) ]
[IST924I -------------------------------------------------------------]
[IST2034I PORT PRIORITY = LOW ]
[IST2036I   NLPS SENT           = nlps_sent          ( estimate ) ]
[IST2037I   BYTES SENT          = bytes_sent         ( estimate ) ]
[IST2038I   NLPS RETRANSMITTED  = nlps_retransmitted ( estimate ) ]
[IST2039I   BYTES RETRANSMITTED = bytes_retransmitted( estimate ) ]
[IST2040I   NLPS RECEIVED       = nlps_received      ( estimate ) ]
[IST2041I   BYTES RECEIVED      = bytes_received     ( estimate ) ]
 IST924I -------------------------------------------------------------
 IST2035I TOTALS FOR ALL PORT PRIORITIES
 IST2036I   NLPS SENT            = nlps_sent          ( estimate )
 IST2037I   BYTES SENT           = bytes_sent         ( estimate )
 IST2038I   NLPS RETRANSMITTED   = nlps_retransmitted ( estimate )
 IST2039I   BYTES RETRANSMITTED  = bytes_retransmitted( estimate )
 IST2040I   NLPS RECEIVED        = nlps_received      ( estimate )
 IST2041I   BYTES RECEIVED       = bytes_received     ( estimate )
 IST314I END

IST924I

• This message is a line separator between subgroups.

IST1324I

• This is the first message of a subgroup. This subgroup is displayed for each active Enterprise Extender virtual routing node. This message is a header message for messages IST2011I and IST2012I. This message is also associated with a subgroup of messages that begins with message IST1680I.
• vnname is the fully qualified virtual routing node name.
• vngroup is the GROUP associated with the connection network definition.
• vntype indicates the type of HPR/IP (Enterprise Extender) connection network. The two possible values are:

  (LOCAL)

  The connection network is being defined as a LOCAL Virtual Routing Node (the connection network cannot traverse network or subnetwork boundaries.) Either VNTYPE was not specified, or VNTYPE was specified as LOCAL on the definition of the Enterprise Extender virtual routing node.

  (GLOBAL)

  The connection network is being defined as a GLOBAL Virtual Routing Node (the connection network can traverse network or subnetwork boundaries.) VNTYPE was specified as GLOBAL on the definition of the Enterprise Extender virtual routing node.

• The complete message subgroup follows the example.

  IST1324I VNNAME = vnname            VNGROUP = vngroup vntype
  IST2011I          AVAILABLE LINES FOR THIS EE VRN        = vrnlines
  IST2012I          ACTIVE CONNECTIONS USING THIS EE VRN   = vrnconns

IST1680I

• type is always LOCAL for this display.
• ip_address is the IP address.

IST1910I

• value is the host name used to acquire the local static IP address displayed in message IST1680I. If the host name is longer than 45 characters, then the first 45 characters are displayed as value and the remaining characters are displayed in one or more IST1911I messages.

IST1911I

• value is the continuation of value on message IST1910I. IST1911I is repeated as many times as necessary to display the entire character string.

IST2004I

• This message displays the LDLC timer operands that are associated with the local static VIPA address displayed in message IST1680I. See the external communication adapter (XCA) major node information in z/OS Communications Server: SNA Resource Definition Reference for more information about the LIVTIME operand for Enterprise Extender.
• The init_value value is the initial duration, in seconds, of an Enterprise Extender logical data link control (LDLC) liveness timer interval.
• The max_value value is the maximum duration, in seconds, of an Enterprise Extender LDLC liveness timer interval.
• The srqtime value is the duration, in seconds, of the Enterprise Extender LDLC short request timer interval. The short request timer interval represents the amount of time the LDLC layer waits, without receipt of a response from the connection partner, before sending the LDLC signal again.
• The srqretry value is the number of times the short request timer is tried again before the Enterprise Extender port becomes inoperative.

IST2009I

• rtppipes is the number of RTP pipes originating in this host that traverse EE connections associated with the local IP address displayed in message IST1680I.
• sessions is the number of LU-LU sessions associated with the rtppipes.

IST2010I

• inopcount is the number of Enterprise Extender connections associated with the local IP address displayed in message IST1680I that have been INOPed by VTAM due to SRQRETRY exhaustion.

IST2011I

• vrnlines is the number of available lines associated with the virtual routing node displayed in message IST1324I of this subgroup.

IST2012I

• vrnconns is the number of active EE connections associated with the virtual routing node displayed in message IST1324I of this subgroup.

IST2013I

• predeflines is the number of available lines for predefined (non-VRN) Enterprise Extender connections that are associated with the local IP address displayed in message IST1680I.

IST2014I

• predefconns is the number of active predefined (non-VRN) Enterprise Extender connections that are associated with the local IP address displayed in message IST1680I.

IST2015I

• lvrnconns is the number of Enterprise Extender local virtual routing node connections that are associated with the local IP address displayed in message IST1680I.
• lvrnconns is the sum of all the vrnconns values that are associated with LOCAL virtual routing nodes displayed in message IST2012I for this local IP address.

IST2016I

• gvrnconns is the number of Enterprise Extender global virtual routing node connections associated with the local IP address displayed in message IST1680I.
• gvrnconns is the sum of all the vrnconns values that are associated with GLOBAL virtual routing nodes displayed in message IST2012I for this local IP address.

IST2030I, IST2031I, IST2032I, IST2033I, IST2034I, IST2035I

• Messages IST2030I through IST2034I are header messages for optional message subgroups. One subgroup is displayed for each port priority when LIST=DETAIL is specified. Each header message is followed by messages IST2036I, IST2037I, IST2038I, IST2039I, IST2040I, and IST2041I.
• IST2035I is a header message for a subgroup that displays a summary of all port priorities. This subgroup includes the same messages as those that are listed for each port priority subgroup.
• Each of these subgroups is also associated with a subgroup of messages that begins with message IST1680I.
• A sample of one of the subgroups follows:

  IST2030I PORT PRIORITY = SIGNAL
  IST2036I   NLPS SENT           = nlps_sent          ( estimate )
  IST2037I   BYTES SENT          = bytes_sent         ( estimate )
  IST2038I   NLPS RETRANSMITTED  = nlps_retransmitted ( estimate )
  IST2039I   BYTES RETRANSMITTED = bytes_retransmitted( estimate )
  IST2040I   NLPS RECEIVED       = nlps_received      ( estimate )
  IST2041I   BYTES RECEIVED      = bytes_received     ( estimate )  

IST2036I

• This message is associated with a subgroup of messages that begins with message IST2030I, IST2031I, IST2032I, IST2033I, IST2034I or IST2035I.
• nlps_sent is the total number of network layer packets (NLP) that have been sent across all active EE connections associated with the local IP address displayed in message IST1680I. This value is the aggregate of these connections for this specific priority. Each EE connection has its own count of sent NLPs, which is maintained from the time each connection was activated.
• estimate is an estimate of the displayed nlps_sent. It is in the form xxxU, where xxx is a numeric value and U is the unit of measure for xxx as follows:

  K

  estimate is in units of 1000 NLPs.

  M

  estimate is in units of 1 000 000 NLPs.

  G

  estimate is in units of 1 000 000 000 NLPs.

  T

  estimate is in units of 1 000 000 000 000 NLPs.

  P

  estimate is in units of 1 000 000 000 000 000 NLPs.

IST2037I

• This message is associated with a subgroup of messages that begins with message IST2030I, IST2031I, IST2032I, IST2033I, IST2034I or IST2035I.
• bytes_sent is the total number of bytes that have been sent across all active EE connections associated with the local IP address displayed in message IST1680I. This value is the aggregate of these connections for this specific priority. Each EE connection has its own count of sent bytes, which is maintained from the time each connection was activated.
• estimate is an estimate of the displayed bytes_sent. It is in the form xxxU, where xxx is a numeric value and U is the unit of measure for xxx as follows:

  K

  estimate is in units of 1000 bytes.

  M

  estimate is in units of 1 000 000 bytes.

  G

  estimate is in units of 1 000 000 000 bytes.

  T

  estimate is in units of 1 000 000 000 000 bytes.

  P

  estimate is in units of 1 000 000 000 000 000 bytes.

IST2038I

• This message is associated with a subgroup of messages that begins with message IST2030I, IST2031I, IST2032I, IST2033I, IST2034I or IST2035I.
• nlps_retransmitted is the total number of network layer packets (NLP) that have been retransmitted across all active EE connections associated with the local IP address displayed in message IST1680I. This value is the aggregate of these connections for this specific priority. Each EE connection has its own count of retransmitted NLPs, which is maintained from the time each connection was activated.
• estimate is an estimate of the displayed nlps_retransmitted. It is in the form xxxU, where xxx is a numeric value and U is the unit of measure for xxx as follows:

  K

  estimate is in units of 1000 NLPs.

  M

  estimate is in units of 1 000 000 NLPs.

  G

  estimate is in units of 1 000 000 000 NLPs.

  T

  estimate is in units of 1 000 000 000 000 NLPs.

  P

  estimate is in units of 1 000 000 000 000 000 NLPs.

IST2039I

• This message is associated with a subgroup of messages that begins with message IST2030I, IST2031I, IST2032I, IST2033I, IST2034I or IST2035I.
• bytes_retransmitted is the total number of bytes that have been retransmitted across all active EE connections associated with the local IP address displayed in message IST1680I. This value is the aggregate of these connections for this specific priority. Each EE connection has its own count of retransmitted bytes, which is maintained from the time each connection was activated.
• estimate is an estimate of the displayed bytes_retransmitted. It is in the form xxxU, where xxx is a numeric value and U is the unit of measure for xxx as follows:

  K

  estimate is in units of 1000 bytes.

  M

  estimate is in units of 1 000 000 bytes.

  G

  estimate is in units of 1 000 000 000 bytes.

  T

  estimate is in units of 1 000 000 000 000 bytes.

  P

  estimate is in units of 1 000 000 000 000 000 bytes.

IST2040I

• This message is associated with a subgroup of messages that begins with message IST2030I, IST2031I, IST2032I, IST2033I, IST2034I or IST2035I.
• nlps_received is the total number of network layer packets (NLP) that have been received across all active EE connections associated with the local IP address displayed in message IST1680I. This value is the aggregate of these connections for this specific priority. Each EE connection has its own count of received NLPs, which is maintained from the time each connection was activated.
• estimate is an estimate of the displayed nlps_received. It is in the form xxxU, where xxx is a numeric value and U is the unit of measure for xxx as follows:

  K

  estimate is in units of 1000 NLPs.

  M

  estimate is in units of 1 000 000 NLPs.

  G

  estimate is in units of 1 000 000 000 NLPs.

  T

  estimate is in units of 1 000 000 000 000 NLPs.

  P

  estimate is in units of 1 000 000 000 000 000 NLPs.

IST2041I

• This message is associated with a subgroup of messages that begins with message IST2030I, IST2031I, IST2032I, IST2033I, IST2034I or IST2035I.
• bytes_received is the total number of bytes that have been received across all active EE connections associated with the local IP address displayed in message IST1680I. This value is the aggregate of these connections for this specific priority. Each EE connection has its own count of received bytes, which is maintained from the time each connection was activated.
• estimate is an estimate of the displayed bytes_received. It is in the form xxxU, where xxx is a numeric value and U is the unit of measure for xxx as follows:

  K

  estimate is in units of 1000 bytes.

  M

  estimate is in units of 1 000 000 bytes.

  G

  estimate is in units of 1 000 000 000 bytes.

  T

  estimate is in units of 1 000 000 000 000 bytes.

  P

  estimate is in units of 1 000 000 000 000 000 bytes.

IST2043I

• totconns is the number of active EE connections associated with the local HOSTNAME entered as input on the DISPLAY EE command.

IST2044I

• totconns is the number of active EE connections associated with the local IP address (IPADDR) entered as input on the DISPLAY EE command.

IST2119I

• This is an optional message that is issued when the DISPLAY EE command contains HOSTNAME filters.
• The correlator value is a unique display correlator associated with this DISPLAY EE command, which requires host name resolution. This correlator can be used to locate the various message groups associated with this DISPLAY EE command.