IST1658I XID3 NEGOTIATION ERROR - DEVICE devicename - SENSE = code
IST1580I XID RECEIVED BY VTAM:
IST1574I offset hexdata_1 hexdata_2 hexdata_3 hexdata_4 EBCDIC_data
⋮
IST1574I offset hexdata_1 hexdata_2 hexdata_3 hexdata_4 EBCDIC_data
[IST1583I BYTE OFFSET OF FIRST BYTE IN ERROR = byteoffset
IST1584I BIT OFFSET OF FIRST BIT IN ERROR = bitoffset]
[IST1582I CONTROL VECTOR X'22' ANALYSIS:
IST1583I BYTE OFFSET OF FIRST BYTE IN ERROR = byteoffset
IST1584I BIT OFFSET OF FIRST BIT IN ERROR = bitoffset]
[IST1586I XID SENT BY VTAM:
IST1574I offset hexdata_1 hexdata_2 hexdata_3 hexdata_4 EBCDIC_data
⋮
IST1574I offset hexdata_1 hexdata_2 hexdata_3 hexdata_4 EBCDIC_data]
IST314I END
code is the sense code and indicates the reason for the failure. See the z/OS Communications Server: IP and SNA Codes for a description of code.
Activation of the TCP/IP over CDLC connection halts. TCP/IP continues.
Notify system programmer.
This is normally a configuration problem, probably caused by an incompatibility between the definitions in the PROFILE.TCPIP and the definitions in the NCP generation. The sense code indicates the reason for the failure. Correct the problem and restart the TCP/IP over CDLC connection.
The received XID3 may contain a CV X'22' (See System Network Architecture Formats, GA27-3136). Presence of the CV X'22' indicates that the CDLC device rejected the XID3 sent from the host. The CV X'22' contains an offset (from the start of the XID3 sent by VTAM) to the unacceptable field.
8
5