z/OS TSO/E Messages
Previous topic | Next topic | Contents | Contact z/OS | Library | PDF


MVSSERV user and system programmer messages (CHS…)

z/OS TSO/E Messages
SA32-0970-00

Component name CHS
Program producing message MVSSERV
Component ID 28507
Audience and where produced For system programmers in the MVSSERV trace data set.

MVSSERV users at their terminals.
Message format CHSxxxxyyz

or

CHSxxxyyz

Use these full message IDs when reporting messages to IBM® support personnel.

yy   Message serial number

z   Type code:

     I   Informational message (MVSSERV continues)

     E   Error message (MVSSERV ends)
Comments The words in the message text printed in italics indicate that MVSSERV supplies specific information which varies depending on the circumstances. That information appears when MVSSERV produces the message in the trace data set.

If a trace data set is active for the MVSSERV session, terminal messages also appear in the MVSSERV trace data.
  • CHSCMI01I
    The control unit supports Read Partitioned Queries.
  • CHSCMI02I
    The control unit does not support Read Partitioned Queries.
  • CHSCMI03E
    I/O error occurred while initializing communications.
  • CHSCMI04I
    Presentation space input was received and ignored.
  • CHSCMI05E
    The PC's communication program is unknown.
  • CHSCMI06I
    Please start the communications program on the PC.
  • CHSCMI07E
    Error occurred loading module CHSTTCA.
  • CHSCMI08E
    Error occurred loading module CHSTDCA.
  • CHSCMI09E
    Communications could not set the 3270 environment.
  • CHSCMI10I
    MVSSERV did not receive the expected reply.
  • CHSCMI11E
    Error occurred loading the logo data.
  • CHSCMI12E
    Error occurred loading module CHSTCUT.
  • CHSCMI13E
    The communications program was not running on the PC.
  • CHSCMI14I
    Please press ENTER to continue.
  • CHSCMI15I
    MVSSERV is invoking the access method driver AMD_name.
  • CHSCMI16E
    An error occurred loading access method driver AMD_name.
  • CHSCMI17E
    The user-defined access method driver was AMODE 24.
  • CHSCSI01E
    MVSSERV's service request routine failed.
  • CHSCSI02I
    The requested server failed: server_name.
  • CHSCSI03I
    Reply data length exceeds the maximum allowed.
  • CHSCSI04I
    Reply parameter length exceeds the maximum allowed.
  • CHSCOM01I
    Data sent at hh:mm:ss, length=length_of_data, RC=return_code:
  • CHSCOM02I
    Data received at hh:mm:ss, length=length_of_data RC=return_code:
  • CHSCOM03E
    I/O error occurred sending data to the PC.
  • CHSCOM04E
    I/O error occurred receiving data from the PC.
  • CHSCOM05E
    I/O error occurred while trying to refresh the logo.
  • CHSCOM06E
    I/O error occurred resetting the screen environment.
  • CHSCOM07I
    Could not send data; the host is disconnected.
  • CHSCOM08I
    Could not receive data; the host is disconnected.
  • CHSCOM09I
    Sending last transmission again; VTAM sent reshow request.
  • CHSCOM10I
    Logo being refreshed; user pressed the PA2 key.
  • CHSCOM11I
    Received data in EDIT mode; resetting fullscreen mode.
  • CHSCPS01E
    MVSSERV could not open the trace data set.
  • CHSCPS02E
    MVSSERV could not load the required modules.
  • CHSCPS03E
    MVSSERV could not set up the recovery environment.
  • CHSCPS04E
    MVSSERV could not parse the command parameter.
  • CHSCPS05E
    MVSSERV could not set up the trace data set.
  • CHSCPS06E
    MVSSERV could not set up the server task.
  • CHSCPS07I
    MVSSERV could not set up the dump suppression table.
  • CHSCPS08I
    MVSSERV is ending.
  • CHSCPS09E
    MVSSERV is ending; service error. Contact support personnel.
  • CHSCPS10I
    An MVSSERV exception occurred. Contact support personnel.
  • CHSCUT01I
    CUT access method driver is active.
  • CHSCUT02E
    Internal processing error; could not obtain storage.
  • CHSCUT03E
    The PC input state is not valid for the host's current state.
  • CHSCUT04I
    CUT_FTNAK_IN received, last frame being sent to the PC again.
  • CHSCUT05I
    A communications header from the PC was not valid.
  • CHSCUT06I
    User pressed the PF3 key, requesting termination.
  • CHSCUT07I
    A checksum indicator from the PC was not valid.
  • CHSCUT08I
    A sequence number from the PC was not valid.
  • CHSCUT09E
    The host sent the maximum number of negative responses.
  • CHSCUT11E
    A second failure occurred in the CUT access method driver.
  • CHSCUT12E
    I/O routine failed; cannot communicate with the PC.
  • CHSCUT13E
    A failure occurred in the CUT access method driver.
  • CHSCUT14E
    I/O error - cannot communicate with the PC.
  • CHSCUT15E
    Error occurred trying to build a service reply.
  • CHSDCA01E
    Error occurred in VM/PC access method driver; retrying.
  • CHSDCA03E
    VM/PC access method driver failed before VM/PC session.
  • CHSDCA04E
    Could not access server; CPRB was not valid.
  • CHSDCA05E
    Could not access server; MVSSERV error.
  • CHSDCA06I
    PNAK received, response being sent to VM/PC again.
  • CHSDCA07E
    VM/PC sent negative response.
  • CHSDCA08I
    PNAK received, request being sent to VM/PC again.
  • CHSDCA09E
    I/O error occurred in VM/PC access method driver.
  • CHSDCOM01I
    The following data is about to be sent to VM/PC:
  • CHSDCOM02E
    I/O error occurred sending data to VM/PC.
  • CHSDCOM03E
    I/O error occurred receiving data from VM/PC.
  • CHSDCOM04E
    Communications header from VM/PC was not valid.
  • CHSDCOM05E
    Data received from VM/PC was not valid.
  • CHSDCOM06E
    Transmission type from VM/PC was not valid.
  • CHSDCOM07I
    Logo being refreshed; user pressed the PA2 key.
  • CHSDCOM08I
    Sending last transmission again; VTAM sent reshow request.
  • CHSDCOM09I
    User pressed the PF3 key, requesting termination.
  • CHSDCOM10E
    An attention interrupt was received from VTAM.
  • CHSDCOM11E
    I/O error occurred while trying to refresh the logo.
  • CHSDCOM12I
    Data received at hh:mm:ss, length=length_of_data RC=return_code:
  • CHSINF01E
    VM/PC servers are not defined to MVSSERV.
  • CHSINF02I
    VM/PC access method driver is active.
  • CHSINF03E
    I/O error occurred while trying to display the logo.
  • CHSIPM01E
    Input parameter data set could not be opened.
  • CHSIPM02I
    Input parameter data set was empty.
  • CHSIPM03E
    I/O error occurred during parameter processing.
  • CHSIPM04I
    The following input parameter was not valid:
  • CHSIPM05E
    Internal processing error; could not obtain storage.
  • CHSIPM06I
    Input parameter data set could not be closed.
  • CHSIPM07I
    A TYPE keyword in an input record is not valid.
  • CHSIPM08I
    Access method driver AMD_name was ignored.
  • CHSREC01I
    MVSSERV's recovery manager received control.
  • CHSREC02I
    ABEND code was abend_code, reason code was reason_code.
  • CHSREC03I
    PSW at time of error was program_status_word.
  • CHSREC04I
    Registers first_register to last_register were:
  • CHSREC06I
    Module=module_name, caller=caller_name, entry point=entry_point_address.
  • CHSREC07I
    Displacement into failing module was displacement.
  • CHSREC08I
    Retry in progress. Repeated retry request ignored.
  • CHSREC09E
    MVSSERV is ending; system error. Contact support personnel.
  • CHSRUT01E
    Recovery environment initialization failed.
  • CHSRUT02E
    Router linkage assist routine failed.
  • CHSRUTR01I
    Service request failed; service request is not supported.
  • CHSRUTR02I
    Service request failed; CPRB is not valid.
  • CHSRUTR03I
    Server definition failed; insufficient storage.
  • CHSRUTR04I
    Server definition failed; server_name is a duplicate name.
  • CHSRUTR05I
    Service request failed; server_name is not a defined server.
  • CHSRUTR06I
    Service request failed; server_name is in an inactive task.
  • CHSRUTR07I
    Server request failed; insufficient storage.
  • CHSRUTR08E
    Router failed; CPRB is not valid.
  • CHSRUTR09E
    Router failed during initialization.
  • CHSRUTR10E
    Router failed during a server definition.
  • CHSRUTR11E
    Router failed during a server request.
  • CHSRUTR12I
    Reply data length exceeds the maximum allowed.
  • CHSRUTR13I
    Reply parameter length exceeds the maximum allowed.
  • CHSRUTR14I
    Service request was accepted for server server_name
  • CHSRUTR15I
    Service request failed; the current server task is inactive.
  • CHSRUTR16E
    Service request failed; MVSSERV error.
  • CHSRUTR17I
    Service request failed; AMDs cannot define servers.
  • CHSSPR01I
    A syntax error was detected in the SRIU.
  • CHSSRI01I
    Initialization/termination program program_name failed.
  • CHSSRI02I
    Load failed for initialization/termination program program_name.
  • CHSSRI03I
    The requested server failed.
  • CHSSRI04E
    The server task failed during initialization.
  • CHSSRI05E
    The server task failed during a service request.
  • CHSSRI06E
    The server task failed during termination.
  • CHSSRV01E
    The server task could not be loaded.
  • CHSSRV02I
    A server task could not be attached.
  • CHSSRV03I
    A server task was detached; initialization failure.
  • CHSTCA01E
    I/O error occurred while trying to display the logo.
  • CHSTCA02E
    Internal processing error; could not obtain storage.
  • CHSTCA03I
    User pressed the PF3 key, requesting termination.
  • CHSTCA04I
    ENTER key was pressed; entered data ignored.
  • CHSTCA05E
    Received transmission without destination/origin ID.
  • CHSTCA06I
    Presentation space input was received and ignored.
  • CHSTCA07E
    I/O error; cannot communicate with the PC.
  • CHSTCA08E
    Received transmission without structured fields.
  • CHSTCA09I
    A sequence error on a service request was detected.
  • CHSTCA10I
    Sequence error on service reply; retrying the reply.
  • CHSTCA11E
    Sequence error on service reply; cannot retry the reply.
  • CHSTCA12E
    Unknown error code in CCC Negative Acknowledge.
  • CHSTCA13I
    DFT access method driver is active.
  • CHSTCA14E
    Input from the PC was not valid.
  • CHSTCA15E
    Error occurred trying to build a service reply.
  • CHSTCA16E
    I/O routine failed; cannot communicate with the PC.
  • CHSTCA17E
    A failure occurred in the DFT access method driver.
  • CHSTCA18E
    A second failure occurred in the DFT access method driver.
  • CHSTCA19I
    Sending CCC Enable transmission again.
  • CHSTCA20E
    The send buffer is too small to send a reply.
  • CHSTRH01I
    Sent frame_type at hh:mm:ss sequence=sequence_number session=session_id length=length_of_frame:
  • CHSTRH02I
    Received frame at hh:mm:ss: sequence=sequence_number session=session_id length=length_of_frame:
  • CHSTRH201I
    Sent frame_type at hh:mm:ss sequence=sequence_number length=length_of_frame:
  • CHSTRH202I
    Received frame_type at hh:mm:ss sequence=sequence_number length=length_of_frame:
  • CHSTRL01I
    VM/PC allocate request for server_name, server ID=server_id.
  • CHSTRR01I
    CPRB request at hh:mm:ss server=server_name function=service_function ID.
  • CHSTRS01I
    CPRB reply at hh:mm:ss RC=server_return_code server_name RC=MVSSERV_return_code.
  • CHSTSF01I
    CCC Enable was processed.
  • CHSTSF02I
    CCC Sequence frame_number (last frame) was processed, length=length of field.
  • CHSTSF03I
    CCC Sequence frame_number was processed, length=length_of_field.
  • CHSTSF04I
    SRIU Prefix was processed.
  • CHSTSF05I
    SRIU Request command was processed, length=length_of_field.
  • CHSTSF06I
    SRIU Reply command was processed, length=length_of_field.
  • CHSTSF07I
    SRIU Parameter was processed, length=length_of_field.
  • CHSTSF08I
    SRIU Data was processed, length=length_of_field.
  • CHSTSF09I
    SRIU Suffix was processed.
  • CHSTSF10I
    SRIU Acknowledge was processed, length=length_of_field:
  • CHSTSF11I
    SRIU exception class=exception_class, code=exception_code, object=exception_object, data:
  • CHSTSF12I
    Unidentified structured field was processed, length=length_of_field.
  • CHSTSF13I
    CCC Disable was processed.
  • CHSTSF14I
    CCC Acknowledge was processed.
  • CHSTSF15I
    CCC Negative Acknowledge was processed, code=return_code.
  • CHSTSF16I
    Unidentified CCC was processed, length=length_of_field.
  • CHSTSF17I
    Soft Error was processed, length=length_of_field:
  • CHSTSF18I
    Soft Error exception class=class, code=error_code, data:
  • CHSTTP01I
    Internal trace table follows. Last entry is nnn:
  • CHSTTP02I
    nnn  xxxxxx nnn  xxxxxx nnn  xxxxxx nnn  xxxxxx

Go to the previous page Go to the next page

Notices | Terms of use | Support | Contact z/OS | zFavorites



Copyright IBM Corporation 1990, 2014