|
You must define at least one pool storage group name to SMS, and
at least one volume serial number to this storage group. (A storage
group with no volumes defined is not valid.) This volume serial should
be for a nonexistent volume to prevent the occurrence of JCL errors
from jobs accessing data sets using a specific volume serial number.
Defining a non-existent volume lets you activate SMS without having
any system-managed volumes. No data sets are system-managed at this
time. This condition provides an opportunity to experiment with SMS
without any risk to your data.
Define the storage group in your SCDS:
- Enter a 6 (Storage Group) on the ISMF Primary Option
Menu to view the Storage Group Application Selection panel, shown
in Figure 1.
Figure 1. Defining a Storage Group for the
Minimal Configuration Panel Utilities Help
------------------------------------------------------------------------------
STORAGE GROUP APPLICATION SELECTION
Command ===>
To perform Storage Group Operations, Specify:
CDS Name . . . . . . . 'USER6.MYSCDS'
(1 to 44 character data set name or 'Active' )
Storage Group Name . . SG2 (For Storage Group List, fully or
partially specified or * for all)
Storage Group Type . . POOL (VIO, POOL, DUMMY, COPY POOL BACKUP
OBJECT, OBJECT BACKUP, or TAPE)
Select one of the following options :
1 1. List - Generate a list of Storage Groups
2. Display - Display a Storage Group (POOL, OBJECT or TAPE only)
3. Define - Define a Storage Group
4. Alter - Alter a Storage Group
5. Volume - Display, Define, Alter or Delete Volume Information
If List Option is chosen,
Enter "/" to select option Respecify View Criteria
Respecify Sort Criteria
Use ENTER to Perform Selection;
Use HELP Command for Help; Use END Command to Exit.
- Specify values for the CDS Name and Storage Group
Name fields. The CDS name must be the same name that you specified
for the SCDS on the CDS Application Selection panel (see Figure 1). In this example, the CDS
name is USER6.MYSCDS and the storage group name is SG2.
Enter
a 2 (Define) to display the Pool Storage Group Define panels, shown
in Figure 2 and Figure 3.
Figure 2. Defining Pool Storage
Group Attributes Page 1 Panel Utilities Scroll Help
------------------------------------------------------------------------------
POOL STORAGE GROUP DEFINE Page 1 of 2
Command ===>
SCDS Name . . . . . : USER6.MYSCDS
Storage Group Name : SG2
To DEFINE Storage Group, Specify:
Description ==>
==>
Auto Migrate . . Y (Y, N, I or P) Migrate Sys/Sys Group Name . .
Auto Backup . . Y (Y or N) Backup Sys/Sys Group Name . .
Auto Dump . . . N (Y or N) Dump Sys/Sys Group Name . . .
Overflow . . . . N (Y or N) Extend SG Name . . . . . . . .
Copy Pool Backup SG Name . . .
Dump Class . . . (1 to 8 characters)
Dump Class . . . Dump Class . . .
Dump Class . . . Dump Class . . .
DEFINE SMS Storage Group Status . . . N (Y or N)
Use ENTER to Perform Selection; Use DOWN Command to View next Page;
Use HELP Command for Help; Use END Command to Save and Exit; CANCEL to Exit.
Figure 3. Defining
Pool Storage Group Attributes Page 2 Panel Utilities Scroll Help
------------------------------------------------------------------------------
POOL STORAGE GROUP DEFINE Page 2 of 2
Command ===>
SCDS Name . . . . . : USER6.MYSCDS
Storage Group Name : SG2
To DEFINE Storage Group, Specify:
Allocation/migration Threshold : High . . 85 (1-99) Low . . 1 (0-99)
Alloc/Migr Threshold Track-Managed: High . . 85 (1-99) Low . . 1 (0-99)
Guaranteed Backup Frequency . . . . . . (1 to 9999 or NOLIMIT)
BreakPointValue . . . . . . . . . . . . (0-65520 or blank)
Processing Priority . . . . . . . . . . (1-100)
Use ENTER to Perform Selection; Use UP Command to View previous Page;
Use HELP Command for Help; Use END Command to Save and Exit; CANCEL to Exit.
SCDS
Name and Storage Group Name are output fields containing the values
that you specified on the Storage Group Application Selection panel
(see Figure 1). Description is an optional
field of 120 characters that you can use to describe the storage group
type.
If
you supply the name of a Parallel Sysplex® in the Migrate System Name, Backup System Name, or Dump
System Name field, make sure you enter it correctly. Otherwise, the
expected operation might not occur.
- Let the storage group attributes default to the ISMF
values.
Press Enter to verify and display the SMS Storage Group
Status Define panel shown in Figure 4.
Figure 4. Defining
Storage Group System Status Panel Utilities Scroll Help
------------------------------------------------------------------------------
SMS STORAGE GROUP STATUS DEFINE Page 1 of 2
Command ===>
SCDS Name . . . . : USER6.MYSCDS
Storage Group Name : SG2
Storage Group Type : POOL
To DEFINE Storage Group System/ ( Possible SMS SG
Sys Group Status, Specify: Status for each:
- Pool SG Type
System/Sys SMS SG System/Sys SMS SG NOTCON, ENABLE
Group Name Status Group Name Status DISALL, DISNEW
---------- ------ ---------- ------ QUIALL, QUINEW
MYSYS01 ===> NOTCON MYSYS02 ===> NOTCON - Tape SG Type
MYSYS03 ===> NOTCON MYSYS04 ===> NOTCON NOTCON, ENABLE,
MYSYS05 ===> NOTCON MYSYS06 ===> NOTCON DISALL, DISNEW )
MYSYS07 ===> NOTCON MYSYS08 ===> NOTCON
*MYSYS09 ===> DISALL *MYSYS10 ===> DISALL * SYS GROUP = sysplex
*MYSYS11 ===> DISALL *MYSYS12 ===> DISALL minus Systems in the
*MYSYS13 ===> DISALL *MYSYS14 ===> DISALL Sysplex explicitly
*MYSYS15 ===> DISALL *MYSYS16 ===> DISALL defined in the SCDS
Use ENTER to Perform Verification; Use DOWN Command to View next Panel;
Use HELP Command for Help; Use END Command to Save and Exit; CANCEL to Exit.
SCDS Name, Storage Group Name, and Storage Group Type are
output fields containing the values that you specified on the Storage
Group Application Selection panel (see Figure 2).
- The names of your systems, system groups, or both are displayed
in the System/Sys Group Name columns. Specify ENABLE in the corresponding
SMS SG STATUS column.
Press Enter to verify. When the verification
is complete, enter the END command twice to return to the Storage
Group Application Selection panel (see Figure 1).
- From this panel, enter a 4 (Volume) to view the Storage Group
Volume Selection panel, shown in Figure 5.
Figure 5. Defining Non-Existent
Volume in Storage Group Panel Utilities Help
------------------------------------------------------------------------------
STORAGE GROUP VOLUME SELECTION
Command ===>
CDS Name . . . . . : USER6.MYSCDS
Storage Group Name : SG2
Storage Group Type : POOL
Select One of the following Options:
_ 1. List - Generate a list of Storage Groups
2. Display - Display SMS Volume Statuses (POOL, OBJECT or TAPE only)
3. Define - Add Volumes to Volume Serial Number List
4. Alter - Alter Volume Statuses (Pool only)
5. Delete - Delete Volumes from Volume Serial Number List
Specify a Single Volume (in Prefix), or Range of Volumes:
Prefix From To Suffix Hex
______ ______ ______ _____ _
===> SG2 ('X' in HEX field allows
===> FROM - TO range to include
===> hex values A through F.)
===>
Use ENTER to Perform Selection;
Use HELP Command for Help; Use END Command to Exit.
CDS
Name, Storage Group Name, and Storage Group Type are output fields
containing the values you specified on previous panels.
- Enter a 2 (Define) and specify the appropriate volume serial numbers.
Each time you press Enter, you display the SMS Volume Status Define
panel, shown in Figure 6.
Figure 6. Defining
Volume System Status Panel Utilities Scroll Help
------------------------------------------------------------------------------
SMS VOLUME STATUS DEFINE Page 1 of 2
Command ===>
SCDS Name . . . . . . : USER6.MYSCDS
Storage Group Name . : SG2
Volume Serial Numbers : VOL010 - VOL03
To DEFINE SMS Volume Status, Specify:
System/Sys SMS Vol System/Sys SMS Vol ( Possible SMS Vol
Group Name Status Group Name Status Status for each:
---------- ------- ---------- ------- NOTCON, ENABLE,
MYSYS01 ===> ENABLE MYSYS02 ===> ENABLE DISALL, DISNEW,
MYSYS03 ===> ENABLE MYSYS04 ===> ENABLE QUIALL, QUINEW )
MYSYS05 ===> ENABLE MYSYS06 ===> ENABLE
*MYSYS09 ===> ENABLE *MYSYS10 ===> ENABLE * SYS GROUP = sysplex
*MYSYS11 ===> ENABLE *MYSYS12 ===> ENABLE minus systems in the
*MYSYS13 ===> ENABLE *MYSYS14 ===> ENABLE sysplex explicitly
*MYSYS15 ===> ENABLE *MYSYS16 ===> ENABLE defined in the SCDS
Use ENTER to Perform Verification; Use DOWN Command to View next Panel;
Use HELP Command for Help; Use END Command to Save and Exit; CANCEL to Exit.
SCDS Name, Storage Group Name, and Volume Serial Numbers
are output fields containing the values that you entered on the Storage
Group Volume Selection panel (see Figure 5).
- Define the relationship between the volume and each system or
system group by entering DISALL in the SMS VOL STATUS column next
to each name in the System/Sys Group Name column.
|