|
- CONSOLENAME(consolename)
- Names the console that receives messages
related to the tape library.
- consolename
- Is a 2-to-8 character console name, starting with an alphabetic
character.
Abbreviation: CONSOLE
- DESCRIPTION(desc)
- Identifies a description for the tape library being
created.
- desc
- Is a 1-to-120 character tape library description.
If you use commas, semicolons, embedded blanks, parentheses, or slashes,
enclose the entire description in single quotation marks. The default
is blanks.
Abbreviation: DESC
- LIBDEVTYPE(devtype)
- identifies the tape library device
type.
- devtype
- is an 8 character hardware device type. If you do not use this,
LIBDEVTYPE is not established.
Abbreviation: LDEVT
- LOGICALTYPE{AUTOMATED|MANUAL}
- identifies the type of tape library being
created. If you do not use this, LOGICALTYPE is not established.
- AUTOMATED
- is an automated tape library.
- MANUAL
- is a manual tape library.
Abbreviation: LOGTYP
- NUMBEREMPTYSLOTS(numslots)
- identifies the total number of empty
slots in the specified tape library. This
parameter can only be specified when LOGICALTYPE is specified as AUTOMATED.
- numslots
- is the number from 0 to 9999999, of tape
cartridges that can be added to the tape library. The
default is 0.
Abbreviation: NUMESLT
- [NUMBERSCRATCHVOLUMES(MEDIA1(num)
MEDIA2(num) MEDIA3(num)
MEDIA4(num) MEDIA5(num)
MEDIA6(num) MEDIA7(num)
MEDIA8(num) MEDIA9(num)
MEDIA10(num)
MEDIA11(num) MEDIA12(num) MEDIA13(num))]
- is the total number of MEDIA1, MEDIA2,
MEDIA3, MEDIA4, MEDIA5, MEDIA6, MEDIA7, MEDIA8, MEDIA9, MEDIA10,
MEDIA11, MEDIA12, and MEDIA13 scratch volumes currently available
in the given tape library.
When creating a library entry for an automated tape library dataserver,
NUMBERSCRATCHVOLUMES can be specified for MEDIA1, MEDIA2, MEDIA3,
MEDIA4, MEDIA5, MEDIA6, MEDIA7, MEDIA8, MEDIA9, MEDIA10,
MEDIA11, MEDIA12, and MEDIA13. When creating a library entry
for a manual tape library dataserver, NUMBERSCRATCHVOLUMES can only
be specified for MEDIA1 and MEDIA2. - MEDIA1(num)
- is the number from 0 to 999999, of Cartridge System Tape scratch
volumes available. The default is 0.
- MEDIA2(num)
- is the number from 0 to 999999, of Enhanced Capacity Cartridge
System Tape scratch volumes available. The default is 0.
- MEDIA3(num)
- is the number from 0 to 999999, of High Performance Cartridge Tape scratch
volumes available. The default is 0.
- MEDIA4(num)
- is the number from 0 to 999999, of MEDIA4 scratch volumes available.
MEDIA4 is IBM Extended High Performance Cartridge Tape.
The default is 0.
- MEDIA5(num)
- Specifies the number of IBM® TotalStorage
Enterprise Tape Cartridge scratch volumes available. Use a number
from 0 to 999999. The default is 0.
- MEDIA6(num)
- Specifies the number of IBM TotalStorage
Enterprise WORM Tape Cartridge scratch volumes available. Use a number
from 0 to 999999. The default is 0.
- MEDIA7(num)
- Specifies the number of IBM TotalStorage
Enterprise Economy Tape Cartridge scratch volumes available. Use a
number from 0 to 999999. The default is 0.
- MEDIA8(num)
- Specifies the number of IBM TotalStorage
Enterprise Economy WORM Tape Cartridge scratch volumes available.
Use a number from 0 to 999999. The default is 0.
- MEDIA9(num)
- Specifies the number of IBM TotalStorage
Enterprise Economy Tape Cartridge scratch volumes available. Use a
number from 0 to 999999. The default is 0.
- MEDIA10(num)
- Specifies the number of IBM TotalStorage
Enterprise Economy WORM Tape Cartridge scratch volumes available.
Use a number from 0 to 999999. The default is 0.
- MEDIA11(num)
- Specifies the number of IBM TotalStorage
Enterprise Advanced Tape Cartridge scratch volumes available. Use
a number from 0 to 999999. The default is 0.
- MEDIA12(num)
- Specifies the number of IBM TotalStorage
Enterprise Advanced WORM Tape Cartridge scratch volumes available.
Use a number from 0 to 999999. The default is 0.
- MEDIA13(num)
- Specifies the number of IBM TotalStorage
Enterprise Advanced Economy Tape Cartridge scratch volumes available.
Use a number from 0 to 999999. The default is 0.
Abbreviation: NUMSCRV
- NUMBERSLOTS(numslots)
- is the total number of slots in the
given tape library.
Use this only when LOGICALTYPE is specified as AUTOMATED.
- numslots
- is the total number, from 0 to 9999999, of
tape cartridges that can be contained in the tape library. The
default is 0.
Abbreviation: NUMSLT
- [SCRATCHTHRESHOLD(MEDIA1(num)
MEDIA2(num) MEDIA3(num)
MEDIA4(num) MEDIA5(num)
MEDIA6(num) MEDIA7(num)
MEDIA8(num) MEDIA9(num)
MEDIA10(num)
MEDIA11(num) MEDIA12(num) MEDIA13(num))]
- identifies the scratch volume message
threshold. When the number of scratch volumes in the tape library falls
below the scratch threshold, an operator action message requesting
that scratch volumes be entered into the tape library is issued
to the library's specified console. When the number of scratch volumes
exceeds twice the scratch threshold, the message is removed from the
console.
When creating a library entry for an automated tape library
dataserver, SCRATCHTHRESHOLD can be specified for MEDIA1, MEDIA2,
MEDIA3, MEDIA4, MEDIA5, MEDIA6, MEDIA7, MEDIA8, MEDIA9, MEDIA10,
MEDIA11, MEDIA12, and MEDIA13. When creating a library entry
for a manual tape library dataserver, SCRATCHTHRESHOLD can only be
specified for MEDIA1 and MEDIA2. - MEDIA1(num)
- is the threshold number, from 0 to 999 999, of Cartridge System
Tape scratch volumes. The default is 0.
- MEDIA2(num)
- is the threshold number, from 0 to 999 999, of Enhanced Capacity
System Tape scratch volumes. The default is 0.
- MEDIA3(num)
- is the threshold number, from 0 to 999 999, of High Performance
Cartridge Tape scratch volumes. The default is 0.
- MEDIA4(num)
- is the threshold number, from 0 to 999 999, of MEDIA4 scratch
volumes. MEDIA4 is IBM Extended
High Performance Cartridge Tape. The default is 0.
- MEDIA5(num)
- Is the threshold number from 0 to 999999 of MEDIA5 scratch volumes.
MEDIA5 is IBM TotalStorage Enterprise
Tape Cartridge. The default is 0.
- MEDIA6(num)
- Specifies the threshold number of IBM TotalStorage
Enterprise WORM Tape Cartridge scratch volumes. Use a number from
0 to 999999. The default is 0.
- MEDIA7(num)
- Specifies the threshold number of IBM TotalStorage
Enterprise Economy Tape Cartridge scratch volumes. Use a number from
0 to 999999. The default is 0.
- MEDIA8(num)
- Specifies the threshold number of IBM TotalStorage
Enterprise Economy WORM Tape Cartridge scratch volumes. Use a number
from 0 to 999999. The default is 0.
- MEDIA9(num)
- Specifies the threshold number of IBM TotalStorage
Enterprise Economy Tape Cartridge scratch volumes. Use a number from
0 to 999999. The default is 0.
- MEDIA10(num)
- Specifies the threshold number of IBM TotalStorage
Enterprise Economy WORM Tape Cartridge scratch volumes. Use a number
from 0 to 999999. The default is 0.
- MEDIA11(num)
- Specifies the threshold number of IBM TotalStorage
Enterprise Advanced Tape Cartridge scratch volumes. Use a number from
0 to 999999. The default is 0.
- MEDIA12(num)
- Specifies the threshold number of IBM TotalStorage
Enterprise Advanced WORM Tape Cartridge scratch volumes. Use a number
from 0 to 999999. The default is 0.
- MEDIA13(num)
- Specifies the threshold number of IBM TotalStorage
Enterprise Advanced Economy Tape Cartridge scratch volumes. Use a
number from 0 to 999999. The default is 0.
Abbreviation:
SCRTHR
|