Define the X.25 NPSI configuration according to the information in X.25 NPSI Planning and Installation. The X.25 NPSI server supports use of the LOGAPPL operand on the X25.MCH definition in the X.25 NPSI configuration to allow automatic recovery. You can use either the Generalized Access to X.25 Transport Extension (GATE) or Dedicated Access to X.25 Transport Extension (DATE).
*
* NPSI MCH DTE Window Packet Logical
* LU Name DNIC Address Size Size Channels
* -------- ---- --------------- - ---- ---
Link XU024 PRIV 1 2 1024 2
Options GATE
*
* IP address X.25 DTE addr C.U.D.
* --------------- --------------- --------
Dest 192.5.57.2 2
You can find a sample in PV SEZAINST(NPSIDATE) for the sites that need to use the X.25 NPSI DATE configuration. See X.25 NPSI Host Programming for information about the definitions and parameters that are used in these configurations.
**********************************************************************
OPTIONS NEWDEFN=YES,USERGEN=X25NPSI
**********************************************************************
....
....
NPSIV32 BUILD ADDSESS=400, +
AUXADDR=800, +
ERLIMIT=16, +
NAMTAB=120, +
MAXSESS=250, +
USGTIER=5, +
BRANCH=8000, +
BFRS=104, BUFFER SIZE TO BE GENED +
CATRACE=(YES,255), CHAN.ADAPTER TRACE OPTION +
CSMSG=C3D9C9E340E2C9E340D4C5E2E2C1C7C540C6D6D940E2E24040+
40C2C340E3C5D9D4C9D5C1D3, +
CWALL=26, +
ENABLTO=30.0, +
ERASE=YES, +
LOADLIB=NCPLOAD, TARGET OF FINAL LINKEDIT +
LTRACE=8, LINES TRACED SIMULTANEOUSLY +
MAXSSCP=8, NUMBER OF CONCURRENT SSCP'S +
MODEL=3745, +
VERSION=V5R2.1, +
NEWNAME=NPSITCP, NAME OF NCP LOAD MODULE +
NUMHSAS=8, HOST SA IN CONCURRENT COMMUNICATION +
OLT=YES, ONLINE TERMINAL TEST +
PWROFF=YES, +
BACKUP=500, +
SALIMIT=511, +
SLODOWN=12, BUFFER SLOWDOWN THRESHOLD (PERCENT) +
SUBAREA=03, +
TRACE=(YES,100), ADDRESS TRACE OPTION IN CORE TABLE +
TYPGEN=NCP, +
TYPSYS=MVS, NCP TO BE GENERATED ON MVS +
TWXID=(E8D6E4C3C1D3D311,C2C9C7D5C3D7C3C1D3D325), +
VRPOOL=30, +
TRANSFR=32, +
NETID=NETA, +
X25.USGTIER=5, +
X25.IDNUMH=01, +
X25.MCHCNT=4, +
X25.MAXPIU=64K
....
....
***********************************************************************
*
* NPSI DEFINITIONS
*
***********************************************************************
X25XXX X25.NET CPHINDX=1, +
NETTYPE=1, +
DM=YES, +
OUHINDX=1
X25.VCCPT INDEX=1, +
MAXPKTL=128, +
VWINDOW=2
X25.OUFT INDEX=1
*---------------------------------------------------------------------*
* Hunt group primary line 021 with fast connect *
*---------------------------------------------------------------------*
HGRP01A X25.MCH ADDRESS=21, +
FRMLGTH=131, 128 byte packet + 3 byte header +
PKTMODL=8, +
ANS=CONT, +
LCGDEF=(0,16), 16 logical channels in group 0 +
MWINDOW=2, +
STATION=DTE, +
SPEED=9600, +
LCN0=NOTUSED, +
GATE=GENERAL, GATE +
LLCLIST=(LLC4), +
CONNECT=YES, Fast connect +
LOGAPPL=TCPIPX25, +
DBIT=NO, +
DIRECT=NO, +
SUBADDR=NO
X25.LCG LCGN=0
X25.VC LCN=(1,16), +
MAXDATA=1034, MAXDATA only with Fast connect! +
TYPE=SWITCHED, +
CALL=INOUT, +
OUFINDX=1, +
VCCINDX=1
*---------------------------------------------------------------------*
* Hunt group secondary line 022 with fast connect *
*---------------------------------------------------------------------*
HGRP01B X25.MCH ADDRESS=22, +
FRMLGTH=131, 128 byte packet + 3 byte header +
PKTMODL=8, +
ANS=CONT, +
LCGDEF=(0,16), 16 logical channels in group 0 +
MWINDOW=2, +
STATION=DTE, +
SPEED=9600, +
LCN0=NOTUSED, +
GATE=GENERAL, GATE +
LLCLIST=(LLC4), +
CONNECT=YES, Fast connect +
LOGAPPL=TCPIPX25, +
DBIT=NO, +
DIRECT=NO, +
SUBADDR=NO
X25.LCG LCGN=0
X25.VC LCN=(1,16), +
MAXDATA=1034, MAXDATA only with Fast connect! +
TYPE=SWITCHED, +
CALL=INOUT, +
OUFINDX=1, +
VCCINDX=1
*---------------------------------------------------------------------*
* DDN line 023 *
*---------------------------------------------------------------------*
DTE01 X25.MCH ADDRESS=23, +
FRMLGTH=131, 128 byte packet + 3 byte header +
PKTMODL=8, +
ANS=CONT, +
LCGDEF=(0,16), 16 logical channels in group 0 +
MWINDOW=2, +
STATION=DTE, +
SPEED=9600, +
LCN0=NOTUSED, +
GATE=GENERAL, GATE +
LLCLIST=(LLC4), +
LOGAPPL=TCPIPX25, +
CTCP=(00), paired with CUD list +
CUD0=(CC), incoming CUD selects CTCP +
DBIT=NO, +
DIRECT=NO, +
SUBADDR=NO
X25.LCG LCGN=0
X25.VC LCN=(1,16), +
TYPE=SWITCHED, +
CALL=INOUT, +
OUFINDX=1, +
VCCINDX=1
*---------------------------------------------------------------------*
* Private line 024: DCE station to router *
*---------------------------------------------------------------------*
DCE01 X25.MCH ADDRESS=24, 1024 byte packet + 3 byte header +
FRMLGTH=1027, +
PKTMODL=8, +
ANS=CONT, +
LCGDEF=(0,2), +
MWINDOW=2, +
STATION=DCE, +
SPEED=9600, +
LCN0=NOTUSED, +
GATE=GENERAL, +
LLCLIST=(LLC4), +
CTCP=(00), paired with CUD list +
CUD0=(CC), incoming CUD selects CTCP +
DBIT=NO, +
DIRECT=NO, +
SUBADDR=NO
X25.LCG LCGN=0
X25.VC LCN=(1,2), +
TYPE=SWITCHED, +
CALL=INOUT, +
OUFINDX=1, +
VCCINDX=1
X25.END
***********************************************************************
....
....
GENEND GENEND