Selecting Option 1, Editor Settings on the Create/Modify
ISPF Configuration panel (ISPPMOD) displays the Modify PDF Edit Configuration
Settings panel (ISPPMOD1). Scroll down to display all the fields on
this panel.
Figure 1. Modify PDF EDIT Configuration
Settings panel (ISPPMOD1) Modify PDF Edit Configuration Settings
Command ===>
More: +
Miscellaneous Edit Settings
Maximum Number of Edit Profiles . . . . 25
Maximum Number of Edit Clipboards . . . 11
Site-wide Initial Macro . . . . . . . .
Maximum Initial Storage for Edit . . . . 0 (Number of 1K Blocks)
Maximum Edit Clipboard Size . . . . . . 0 (Number of 4K Pages)
Undo Storage Size . . . . . . . . . . . 0 (Number of 1K Blocks)
Text Flow Terminators . . . . . . . . . .:&<
Edit CUT Default Action . . . . . . . . REPLACE (APPEND or REPLACE)
Edit PASTE Default Action . . . . . . . KEEP (DELETE or KEEP)
Enter "/" to select option
/ Allow Edit Highlighting
/ Default Editor to have Highlighting Enabled
/ Highlight Assembler Continuation Errors
/ Default Editor to have Action Bars Present
/ Warn on Trailing Blank Truncation
/ Allow Creation of CREATE/REPLACE Target Data Set
Force ISRE776 if RCHANGE passed arguments
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Figure 2. Modify PDF Edit Configuration
Settings panel (ISPPMOD1) Modify PDF Edit Configuration Settings
Command ===>
More: - +
Edit Preserve Settings
Enter "/" to select option
Preserve VB record length
Force the Preserve VB record length Selection
│
Edit Recovery Data Set Settings │ SCLM Warning Level
Block Size . . . . . . 13680 │ 2 1. None
Primary Blocks . . . . 40 │ 2. Warn
Secondary Blocks . . . 200 │ 3. Error
────────────────────────────────────────────────────────────────────────────
New Edit Profile Settings and Overrides
----------------------------------------------------------------------------
Please press HELP to see important information about setting edit profile
defaults.
----------------------------------------------------------------------------
Profile Initial Macro Force initial macro
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Figure 3. Modify PDF Edit Configuration
Settings panel (ISPPMOD1) Modify PDF Edit Configuration Settings
Command ===>
More: - +
Enter "/" to select option Enter "/" to force settings
/ STATS ON STATS
RECOVERY ON RECOVERY
/ RECOVERY warning message RECOVERY warning
/ SETUNDO ON SETUNDO
PACK ON PACK
CAPS ON
/ NOTE ON HEX Mode . . . 2 1. ON
/ NUMBER ON 2. OFF
COBOL Numbers 3. VERT
/ Standard Numbers 4. DATA
AUTONUM ON
AUTOLIST ON NULLS Mode . . 1 1. ON STD
PROFILE LOCK 2. ON ALL
/ AUTOSAVE ON 3. OFF
/ AUTOSAVE PROMPT
────────────────────────────────────────────────────────────────────────────
Edit Highlighting
Language Enter "/" to select option
1 1. Automatic determination HILITE ON
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Figure 4. Modify PDF Edit Configuration
Settings panel (ISPPMOD1) Modify PDF Edit Configuration Settings
Command ===>
More: - +
2. Assembler
3. PL/I Highlight DO/END logic
4. COBOL Highlight IF logic
5. Pascal
6. C Match parentheses
7. BookMaster / Highlight FIND strings
8. REXX / Highlight cursor position
9. ISPF Panel
10. ISPF Skeleton
11. JCL
12. ISPF DTL
13. Other (CLIST, etc.)
14. Default (no language)
15. PL/X
16. IDL
17. SuperC Listing
18. HTML
19. XML
Margins
C Left . . * Right . . *
PL/I Left . . * Right . . *
PL/X Left . . * Right . . *
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Selecting Option 2, Edit/View/Browse VSAM Settings on the
Create/Modify ISPF Configuration panel (ISPPMOD) displays the Modify
Edit/View/Browse VSAM Settings panel (ISPPMOD2).
Figure 5. Modify Edit/View/Browse
VSAM Settings panel (ISPPMOD2) Modify Edit/View/Browse VSAM Settings Row 1 to 2 of 6
Command ===> Scroll ===> PAGE
VSAM Enablement
Enter "/" to select option
VSAM Enabled for Edit
VSAM Enabled for Browse
VSAM Enabled for View
VSAM Commands
VSAM Edit Command . . FMNMAIN DSE /
VSAM Browse Command FMNMAIN DSB /
VSAM View Command . . FMNMAIN DSB /
────────────────────────────────────────────────────────────────────────────
Restricted Data Sets
Command Data Set Name or Pattern (E, B, V or A)
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Selecting Option 3, PDF Exits and Other PDF Settings on
the Create/Modify ISPF Configuration panel (ISPPMOD) displays the Modify
PDF Configuration Settings panel (ISPPMOD3). Scroll down to display
all the fields on this panel.
Figure 6. Modify PDF Configuration
Settings panel (ISPPMOD3) Modify PDF Configuration Settings
Command ===>
More: +
PDF Exits
Data Set Allocation Program Exit . . . . . .
Print Utility Program Exit . . . . . . . . .
Print Utility Command Exit . . . . . . . . .
Compress Program Exit . . . . . . . . . . .
Compress Command Exit . . . . . . . . . . .
Data Set List Filter Program Exit . . . . .
Member List Filter Program Exit . . . . . .
Data Set Name Change Program Exit . . . . .
Data Set List Line Command Program Exit . .
Activity Monitoring Program Exit . . . . . .
Member List Line Command Program Exit . . .
Member List Line Command Command Exit . . .
PDF Data Set Characteristics
Outlist Utility SuperC Block Sizes
Record Length . . . 133 List Data Set . . . . . . . . 0
Block Size . . . . . 13566 Update Data Set . . . . . . . 0
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Figure 7. Modify PDF Configuration
Settings panel (ISPPMOD3) Modify PDF Configuration Settings
Command ===>
More: - +
Block Size . . . . . 13566 Update Data Set . . . . . . . 0
Primary Blocks . . . 200 Profile Data Set . . . . . . 0
Secondary Blocks . . 100 Statements Data Set . . . . . 0
Listing Primary Quantity . . 50
Listing Secondary Quantity 100
Update Primary Quantity . . . 15
Update Secondary Quantity . . 30
Move/Copy Settings
Enter "/" to select option
/ Allow Creation of Move/Copy Target Data Set
When to Use IEBCOPY
0 0. Use when processing PDSEs or when using COPYMOD to Copy to a Smaller
Block Size
1. Always use IEBCOPY for Load Modules
2. Use IEBCOPY for PDSEs only
When to use COPY or COPYMOD
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Figure 8. Modify PDF Configuration
Settings panel (ISPPMOD3) Modify PDF Configuration Settings
Command ===>
More: - +
When to use COPY or COPYMOD
2 1. Use COPY if the target block size is equal to or greater than the
source block size, COPYMOD otherwise
2. Use COPY if the target block size is equal to the source block size,
COPYMOD otherwise
3. Always use COPYMOD
DSLIST Removable Media Settings
Enter "/" to select option
Enable RM/Tape Commands
RM/Tape Command . . %EDGRPD34
Command APPLID . . . EDG
Other PDF Settings
Default PDF Unit . . . . . . . . . . . . SYSALLDA
Volume for Migrated Data Sets . . . . . MIGRAT
Delete Command for Migrated Data Sets HDELETE
Allowed Allocation Units . . . . . . . . ANY
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Figure 9. Modify PDF Configuration
Settings panel (ISPPMOD3) Modify PDF Configuration Settings
Command ===>
More: - +
Allowed Allocation Units . . . . . . . . ANY
Maximum IEBCOPY Return Code . . . . . . 0
Pathname Substitution Character . . . . !
Enter "/" to select option
Allocate Before Uncatalog
/ Verify Expiration Dates
/ Use SuperC Program Interface
Monitor Edit Macro Commands via the Activity Monitoring Exit
/ Allow SUBMIT from Browse
/ Allow SUBMIT from View
/ Warn when rename target could be a GDG
/ Default Edit/Browse/View member list from Option 3.4
/ Enable View
Use Panel ISRTSOA in Option 6
Print using ICF
Disallow wildcards in the high level qualifier for Data Set List
Disable all ENQ displays
/ Fail on LMF lock requests
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Selecting Option 4, ISPF Site-wide Defaults on the Create/Modify
ISPF Configuration panel (ISPPMOD) displays the Modify ISPF Sitewide
Defaults panel (ISPPMOD4). Scroll down to display all the fields on
this panel.
Figure 10. Modify ISPF
Sitewide Defaults panel 1 (ISPPMOD4) Modify ISPF Sitewide Defaults
Command ===>
More: +
If you select any RESET fields in the sections: ISPF Site-wide Defaults, CUA
Color Settings, Log and List Defaults, Terminal and User Defaults, Workstation
Defaults, or Workstation Download Defaults you must increment the Sitewide
Defaults Version Level field to enable the RESET fields you have selected.
Increment only the last 3 digits of the Sitewide Defaults Version Level. ISPF
is always shipped with the Sitewide Defaults Version Level field set to 43000.
This value does not change with new versions or releases of ISPF.
Sitewide Defaults Version Level . . 43003
General settings Reset flags
Enter "/" to select option Enter "/" to select option
Tab to Point and Shoot Reset Tab to Point and Shoot
/ Tab to Action Bars Reset Tab to Action Bars
Use Session Manager Reset Use Session Manager
/ Jump From Leader Dots Reset Jump From Leader Dots
/ Always Show Split Line Reset Show Split Line
/ Long Messages in Pop-ups Reset Long Messages in Pop-ups
Edit PRINTDS Command Reset Edit PRINTDS Command
/ Restore Test/Trace Options Reset Restore Test/Trace Options
/ Display Panels in CUA Mode Reset Display Panels in CUA Mode
/ Use Keylists Reset Use Keylists
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Figure 11. Modify ISPF
Sitewide Defaults panel 2 (ISPPMOD4) Modify ISPF Sitewide Defaults
Command ===>
More: - +
/ Use Keylists Reset Use Keylists
/ Show Pfkeys Reset Show Pfkeys
Reset LOG Data Set Process Option
Select Option 7.1 Dialog Test Panel Reset LIST Data Set Process Option
1 1. ISPYFP Reset Command Line Placement
2. ISPYFPA
3. ISPYFPB
Command Line Placement PRINTDS Option
2 1. Bottom 1 1. DEST
2. Asis 2. WRITER
Scroll Defaults Status Area Default
4 1. PAGE 2 1. Calendar
2. HALF 2. Session
3. MAX 3. Function Keys
4. CSR 4. User Point and Shoot
5. DATA 5. None
Reset flags
Minimum Scroll Value 1 / Reset Scroll Values
Maximum Scroll Value 9999999
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Figure 12. Modify ISPF
Sitewide Defaults panel 3 (ISPPMOD4) Modify ISPF Sitewide Defaults
Command ===>
More: - +
Maximum Scroll Value 9999999
Member list options
Enter "/" to select option
/ Scroll Member List Reset Scroll Member List
Allow Empty Member List Reset Empty Member List Options
Allow Empty Member List
(nomatch)
/ Empty Member List for Edit Only
ISPF Data Set Characteristics
Log Data Set List Data Set
Record Length . . . : 125 Records per Block . . 0
Block Size . . . . . . 0
ISPCTL0 Data Set ISPLSTx Data Set
Record Length . . . : 80 Record Length . . . : 121
Block Size . . . . . . 00 Block Size . . . . . . 0
Primary Quantity . . . 10 Primary Quantity . . . 1
Secondary Quantity . . 100 Secondary Quantity . . 10
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Figure 13. Modify ISPF
Sitewide Defaults panel 4 (ISPPMOD4) Modify ISPF Sitewide Defaults
Command ===>
More: - +
ISPCTLx Data Set ISPWRKx Data Set
Record Length . . . : 80 Record Length . . . : 256
Block Size . . . . . . 000 Block Size . . . . . . 0
Primary Quantity . . . 100 Primary Quantity . . . 999
Secondary Quantity . . 100 Secondary Quantity . . 999
LOG Data Set Process Option LIST Data Set Process Option
1 1. Process Option Not Set 1 1. Process Option Not Set
2. Print and Delete 2. Print and Delete
3. Delete Without Printing 3. Delete Without Printing
4. Keep 4. Keep
5. Keep and Allocate a New LOG 5. Keep and Allocate a New LIST
Enter "/" to select option
/ Use Default PDF Unit for ISPF Data Sets
Use Additional Qualifier for PDF Output Data Sets
Temporary Data Sets
Additional Qualifier . .
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Figure 14. Modify ISPF
Sitewide Defaults panel 5 (ISPPMOD4) Modify ISPF Sitewide Defaults
Command ===>
More: - +
ISPF Multi-logon Profile Options
Enter "/" to select option
Multi-logon Profile Sharing
/ Prompt for Profile ENQ Lockout ENQ Lock Wait . . . . . 1000
Reset Shared Profile Settings ENQ Lock Retry Count . . 1
System Profile conflicts Reference List conflicts
1 1. Keep 1 1. Keep
2. Discard 2. Discard
3. Prompt 3. Prompt
ISPF Profile conflicts Edit Profile conflicts
1 1. Keep 1 1. Keep
2. Discard 2. Discard
3. Prompt 3. Prompt
Application Profile conflicts Batch Profile conflicts
1 1. Keep 2 1. Keep
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Figure 15. Modify ISPF
Sitewide Defaults panel 6 (ISPPMOD4) Modify ISPF Sitewide Defaults
Command ===>
More: - +
1 1. Keep 2 1. Keep
2. Discard 2. Discard
3. Prompt
Other Profile conflicts
1 1. Keep
2. Discard
3. Prompt
ISPF PDSE Enqueue Processing
Select this option to prevent ISPF from issuing a data set reserve for
PDSE
ISPF Init Command
Local PRINTDS Options . . . NONUM
F1=Help F2=Split F3=Exit F7=Backward F8=Forward F9=Swap
F12=Cancel
Selecting Option 5, ISPDFLTS, CUA Colors, and Other DM Settings on
the Create/Modify ISPF Configuration panel (ISPPMOD) displays the
Modify ISPDFLTS and Other DM Settings panel (ISPPMOD5). Scroll down
to display all the fields on this panel.
Figure 16. Modify ISPDFLTS and Other
DM Settings panel (ISPPMOD5) Modify ISPDFLTS and Other DM Settings
Command ===>
More: +
ISPDFLTS Settings
Enter "/" to select option
Number of Rows for TBADD 1 Enable ISPF Exits
Command Table Settings
APPLID for User Command Table 1 . . USER
APPLID for User Command Table 2 . .
APPLID for User Command Table 3 . .
APPLID for Site Command Table 1 . . SITE Site Command Table Search Order
APPLID for Site Command Table 2 . . 1. Before
APPLID for Site Command Table 3 . . 1. After
Miscellaneous DM Settings
Maximum Number of Split Screens . . 8
Year 2000 Sliding Rule . . . . . . 65
Retrieve Command Stack Size . . . . 512
TPUT Buffer Size . . . . . . . . . 0
Default Primary Panel . . . . . . .
Default LIBDEF Processing Option (COND UNCOND STACK or STKADD)
F1=HELP F2=SPLIT F3=END F4=RETURN F5=RFIND F6=RCHANGE
F7=UP F8=DOWN F9=SWAP F10=LEFT F11=RIGHT F12=RETRIEVE
Figure 17. Modify ISPDFLTS and
Other DM Settings panel (ISPPMOD5) Modify ISPDFLTS and Other DM Settings
Command ===>
More: - +
────────────────────────────────────────────────────────────────────────────
Default session language
1. English
2. Uppercase English
3. German
4. Swiss German
5. Japanese
ZDATEFD may use the national language │
convention to replace the characters YY, │ Examples:
MM, DD and the national language delimiter. │ English - YY/MM/DD
│ German - TT.MM.JJ
Date Format (ZDATEFD) . . │
│
ZDATEF must use the characters YY, MM, DD │ Examples:
(in any order) and the national language │ English - YY/MM/DD
delimiter. │ German - DD.MM.YY
│
F1=HELP F2=SPLIT F3=END F4=RETURN F5=RFIND F6=RCHANGE
F7=UP F8=DOWN F9=SWAP F10=LEFT F11=RIGHT F12=RETRIEVE
Figure 18. Modify ISPDFLTS and
Other DM Settings panel (ISPPMOD5) Modify ISPDFLTS and Other DM Settings
Command ===>
More: - +
Date Format (ZDATEF) . . . │
Time Separator Character
────────────────────────────────────────────────────────────────────────────
If you select any RESET fields in the sections: ISPF Site-wide Defaults, CUA
Color Settings, Log and List Defaults, Terminal and User Defaults,
Workstation Defaults, or Workstation Download Defaults you must increment
the Sitewide Defaults Version Level field to enable the RESET fields you
have selected. Increment only the last 3 digits of the Sitewide Defaults
Version Level. ISPF is always shipped with the Sitewide Defaults Version
Level field set to 43000. This value does not change with new versions or
releases of ISPF.
Sitewide Defaults Version Level . . 43000
CUA Color Settings
F1=HELP F2=SPLIT F3=END F4=RETURN F5=RFIND F6=RCHANGE
F7=UP F8=DOWN F9=SWAP F10=LEFT F11=RIGHT F12=RETRIEVE
The remaining screens enable you to specify the CUA Color settings
for these panel elements:
- Action Bar Selected Choice
- Action Bar Separator Line
- Action Bar Unselected Choice
- Action Message Text
- Caution Text
- Choice Entry Field
- Column Heading
- Descriptive Text
- Emphasized Text
- Error Emphasis
- Field Prompt
- Function Keys
- Informational Message Text
- List Entry Field
- List Item Description
- List Item
- Normal Entry Field
- Normal Text
- Panel ID
- Panel Information
- Panel Title
- Point and Shoot
- Pulldown Available Choice
- Pulldown Unavailable Choice
- Reference Phrase
- Scroll Information
- Selection Available Choice
- Selection Unavailable Choice
- Variable Output Information
- Warning Message Text
- Warning Message
- Workarea Separator Line
Figure 19 shows the options
for the first two panel elements.
Figure 19. Modify ISPDFLTS and
Other DM Settings panel (ISPPMOD5) Modify ISPDFLTS and Other DM Settings End of data
Command ===>
More: -
CUA Color Settings
Action Bar Selected Choice
Color Intensity Hilite Reset Setting
6 1. Blue 0 0. Low 0 0. None 2 1. Yes
2. Red 2. High 1. Blink 2. No
3. Pink 2. Reverse Video
4. Green 4. Underscore
5. Turquoise
6. Yellow
7. White
Action Bar Separator Line
Color Intensity Hilite Reset Setting
1 1. Blue 0 0. Low 0 0. None 2 1. Yes
2. Red 2. High 1. Blink 2. No
3. Pink 2. Reverse Video
4. Green 4. Underscore
5. Turquoise
6. Yellow
7. White
F1=HELP F2= F3=END F4=DATASETS F5=FIND F6=CHANGE
F9=SWAP F10=LEFT F11=RIGHT F12=SUBMIT
z/OS ISPF Planning and Customizing
Copyright IBM Corporation 1990, 2014