 |
- GUI_APPC_ADDRESS
- The workstation's APPC network name in fully qualified LU name
format or in symbolic destination name format.
The default is
NONE.
- GUI_APPC_ADDRESS2
- The workstation's APPC network name in fully qualified LU name
format or in symbolic destination name format.
The default is
NONE.
- GUI_APPC_ADDRESS3
- The workstation's APPC network name in fully qualified LU name
format or in symbolic destination name format.
The default is
NONE.
- GUI_APPC_ADDRESS4
- The workstation's APPC network name in fully qualified LU name
format or in symbolic destination name format.
The default is
NONE.
- GUI_APPC_ADDRESS5
- The workstation's APPC network name in fully qualified LU name
format or in symbolic destination name format.
The default is
NONE.
- GUI_CLOSE_WINDOW
- The command to be processed when a GUI window is closed. Valid
values are:
- 1
- CANCEL
- 2
- END
- 3
- EXIT
- 4
- RETURN
The default value is
1 (CANCEL).
- GUI_DISPLAY_ENTER_KEY
- If YES the enter key button will be displayed at the bottom of
GUI panels. Valid values are YES or NO.
The default is YES.
- GUI_WINDOW_FRAME
- Select the type of GUI window frame. Valid values are:
- 1 Standard
- a GUI window frame that can be resized and has max/min buttons
- 2 Fixed
- a GUI window frame that has max/min buttons, but cannot be resized
- 3 Dialog
- a GUI window frame that cannot be resized and does not have max/min
buttons
The default is 1.
- GUI_NETWORK
- Select the network protocol to be used for the GUI session. Valid
values are:
- 1 TCP/IP
- Transmission Control Protocol/Internet Protocol
- 2 APPC
- Advanced Program-to-Program Communication
- 3 ISPDTPRF file
- This option tells ISPF to look for the file allocated to DD ISPDTPRF.
ISPF will search this file and use the network protocol and address
specified for your userid.
The default is 1.
- GUI_SWITCH
- A connection to the workstation will be established and subsequent
panels will be displayed in GUI mode after the ENTER key is pressed.
Valid values are:
- 1
- GUI display
- 2
- Non-GUI display
The default is 1, GUI
display.
- SAVE_GUI_VALUES
- Save the values entered on ISPF Settings Initiate the Workstation
Connection panel in the system profile. Valid values are YES or NO.
The default value is YES.
- GUI_TCP_ADDRESS
- The TCP/IP address of the workstation in which the GUI display
or connection should be made. The TCP/IP address can be in dotted
decimal format or in domain name format.
The default is NONE.
- GUI_TCP_ADDRESS2
- The TCP/IP address of the workstation in which the GUI display
or connection should be made. The TCP/IP address can be in dotted
decimal format or in domain name format.
The default is NONE.
- GUI_TCP_ADDRESS3
- The TCP/IP address of the workstation in which the GUI display
or connection should be made. The TCP/IP address can be in dotted
decimal format or in domain name format.
The default is NONE.
- GUI_TCP_ADDRESS4
- The TCP/IP address of the workstation in which the GUI display
or connection should be made. The TCP/IP address can be in dotted
decimal format or in domain name format.
The default is NONE.
- GUI_TCP_ADDRESS5
- The TCP/IP address of the workstation in which the GUI display
or connection should be made. The TCP/IP address can be in dotted
decimal format or in domain name format.
The default is NONE.
- GUI_TITLE
- The GUI title is the default value to be used for the title bar.
If the GUI title is blank the title bar will be set to the userid
from where the dialog was initiated.
The default is NONE (blank).
- GUI_ACCELERATOR_SUPPORT
- When running in GUI mode and Accelerator Support is YES, any accelerator
keys that are defined for the pulldown menus will be appended to the
pulldown choice text and the accelerator keys will be functional.
Valid values are YES or NO.
The default is YES.
- HOST_CODE_PAGE and HOST_CHARACTER_SET
- Both the Code Page (CP) and the Character Set (CS) must be specified
in order to be used. If specified they are used in translating the
data from host to workstation. If the code page and character set
are specified as 0000, values from the terminal query will be used.
If your terminal/emulator does not support code pages, the CODEPAGE
and CHARSET parameter values on ISPSTART will be used. The default
will be English (U.S.) if these ISPSTART parameters are not specified.
The default is 0000 for both.
For more information about
code pages and character sets refer to the z/OS ISPF Dialog Developer's Guide and Reference.
- CP & CS
- Used by countries
- 0037 0697
- United States, Canada, Netherlands, Portugal, Brazil, Australia,
New Zealand
- 0273 0697
- Austria, Germany
- 0280 0697
- Italy
- 0277 0697
- Denmark, Norway
- 0278 0697
- Finland, Sweden
- 0284 0697
- Spain, Latin America (Spanish)
- 0285 0697
- United Kingdom
- 0297 0697
- France
- 0500 0697
- Belgium, Switzerland
- 0870 0959
- Latin 2
- 0880 0960
- Cyrillic
- 1025 1150
- Cyrillic
- 290 1172
- Japanese (Katakana)
- 1027 1172
- Japanese (Latin)
- 833 1173
- Korean
- 836 1174
- Simplified Chinese
- 037 1175
- Traditional Chinese
These Code Pages (CP)
and the Character Sets (CS) support the Euro currency sign.
- CP & CS
- Used by countries
- 1140 0695
- United States, Canada, Netherlands, Portugal, Brazil, Australia,
New Zealand
- 1141 0695
- Austria, Germany
- 1144 0695
- Italy
- 1145 0695
- Spain, Latin America (Spanish)
- 1146 0695
- United Kingdom
- 1147 0695
- France
- 1148 0695
- Belgium, Canada, Switzerland
- 1149 0695
- Iceland
- RESET_HOST_CODE_PAGE
- Reset the host code page value.
The default is NO.
- RESET_HOST_CHARACTER_SET
- Reset the host character set value.
The default is NO.
- GUI_DEFAULT_BACKGROUND_COLOR
- Allows you to specify the background color for the display of
GUI panels. The valid values are: 1 (Dialog) and 2 (Standard).
The
default is 1.
- GUI_DOWNLOAD_IMAGES
- When running in GUI mode and Download Images is YES, ISPF will
attempt to download images from the host libraries defined to ddname
ISPILIB. When Download Images is NO, ISPF will not download images
from the host. Valid values are YES or NO.
The default is YES.
- GUI_MAKEPATH_FOR_IMAGES
- When running in GUI mode and Make Path for Images is YES and the
image path you have specified does not exist, ISPF will attempt to
create the path. Valid values are YES or NO.
The default is NO.
- CONTINUE_3270_AFTER_LOSS_OF_WS_CONNECTION
- If the "3270 Mode after losing workstation connection" setting
is selected, the ISPF session continues in the 3270 emulator session
rather than abend with code 989 is the workstation connection is lost
while running in GUI mode. Valid values are YES and NO.
The default
is YES.
|
z/OS ISPF Planning and Customizing
Copyright IBM Corporation 1990, 2014