0 |
— |
Equate Symbol: HzsqueryRc_OK Meaning:
Requested information returned
Action: None required
|
4 |
— |
Equate Symbol: HzsqueryRc_Warn Meaning:
Warning
Action: Refer to action under the individual
reason code.
|
4 |
xxxx0401 |
Equate Symbol: HzsqueryRsn_NotAllDataReturned Meaning:
Not all data was returned because the answer area is not big enough.
Answer area field HZSQUAAHTLEN /HZSQUAAH64TLEN indicates how much
space is currently required.
Action: Allocate a larger
area and request the function again.
|
8 |
— |
Equate Symbol: HzsqueryRc_InvParm Meaning:
HZSQUERY request specifies incorrect parameters.
Action:
Refer to action under the individual reason code.
|
8 |
xxxx0801 |
Equate Symbol: HzsqueryRsn_NotAuthorized Meaning:
Caller is not authorized.
For INSTANCE=LOGSTREAM, the first
eight bytes of the DIAG area in the header (HZSQUAAHDIAG or HZSQUAAH64DIAG)
contain the four-byte return code and four-byte reason code from the
IXGCONN service.
Action: Avoid calling HZSQUERY when
not authorized
|
8 |
xxxx0818 |
Equate Symbol: HzsqueryRsn_BadParmlist Meaning:
Error accessing parameter list.
Action: Make sure that
the provided parameter list is valid.
|
8 |
xxxx0838 |
Equate Symbol: HzsqueryRsn_BadParmListVersion Meaning:
The specified version of the macro is not compatible with the current
version of IBM Health Checker
for z/OS®.
Action:
Avoid requesting parameters that are not supported by this version
of IBM Health Checker for z/OS.
|
8 |
xxxx0843 |
Equate Symbol: HzsqueryRsn_SrbMode Meaning:
SRB mode.
Action: Avoid issuing HZSQUERY in SRB mode.
|
8 |
xxxx0844 |
Equate Symbol: HzsqueryRsn_NotEnabled Meaning:
Not Enabled.
Action: Avoid using HZSQUERY when not enabled.
|
8 |
xxxx0845 |
Equate Symbol: HzsqueryRsn_Locked Meaning:
Locked
Action: Avoid using HZSQUERY when a lock is held.
|
8 |
xxxx0846 |
Equate Symbol: HzsqueryRsn_FRR Meaning:
The caller had an EUT FRR established.
Action: Avoid
using HZSQUERY when an EUT FRR is established.
|
8 |
xxxx0847 |
Equate Symbol: HzsqueryRsn_BadParmlistALET Meaning:
Bad parameter list ALET.
Action: Make sure that the
ALET associated with the parameter list is valid. The access register
might not have been set up correctly.
|
8 |
xxxx0848 |
Equate Symbol: HzsqueryRsn_BadAnsAreaALET Meaning:
Bad answer area ALET.
Action: Make sure that the ALET
associated with the answer area is valid. The access register might
not have been set up correctly.
|
8 |
xxxx0849 |
Equate Symbol: HzsqueryRsn_BadAnsArea Meaning:
Error accessing answer area.
Action: Make sure that
the provided answer area is valid.
|
8 |
xxxx084A |
Equate Symbol: HzsqueryRsn_BadAnsLen Meaning:
AnsLen is less than size of the header area.
Action:
Provide a larger answer area (as indicated by the ANSLEN keyword).
|
8 |
xxxx084B |
Equate Symbol: HzsqueryRsn_BadParmlistValue Meaning:
A parameter list field contains an unsupported value.
Action:
Check for possible storage overlay
|
8 |
xxxx084C |
Equate Symbol: HzsqueryRsn_BadCategoryALET Meaning:
Bad category ALET.
Action: Make sure that the ALET associated
with the category area is valid. The access register might not have
been set up correctly.
|
8 |
xxxx084D |
Equate Symbol: HzsqueryRsn_BadCategory Meaning:
Error accessing category area.
Action: Make sure that
the provided category area is valid.
|
8 |
xxxx084E |
Equate Symbol: HzsqueryRsn_MsgTokenNotValid Meaning:
MSGTOKEN is not valid.
Action: Make sure that the MSGTOKEN
specifies a value returned by HZSQUERY. As that might represent a
check that no longer exists, it might be necessary to re-issue HZSQUERY
to get a new MSGTOKEN.
|
8 |
xxxx085C |
Equate Symbol: HzsqueryRsn_XM Meaning:
For INSTANCE=LOGSTREAM, a cross-memory environment exists.
Action:
Avoid using HZSQUERY INSTANCE=LOGSTREAM when the primary address space
does not match the home address space.
|
8 |
xxxx085D |
Equate Symbol: HzsqueryRsn_BadQUAAC1HDRALET Meaning:
Bad QUAAC1HDR ALET.
Action: Make sure that the ALET
associated with the QUAAC1HDR area is valid. The access register might
not have been set up correctly.
|
8 |
xxxx085E |
Equate Symbol: HzsqueryRsn_BadQUAAC1HDR Meaning:
Error accessing QUAAC1HDR area.
Action: Make sure that
the provided QUAAC1HDR area is valid.
|
0C |
— |
Equate Symbol: HzsqueryRc_EnvError Meaning:
Environmental Error
Action: Refer to action under the
individual reason code.
|
0C |
xxxx0C01 |
Equate Symbol: HzsqueryRsn_IBMHCNotActive Meaning: IBM Health Checker for z/OS is not active
Action: Re-issue
the request when the service is available
|
0C |
xxxx0C21 |
Equate Symbol: HzsqueryRsn_LogstreamRecordNotFound Meaning:
The requested record within the logstream specified within the QUAAC1HDR
area could not be found. The requested data could not be retrieved.
The
first eight bytes of the DIAG area in the header (HZSQUAAHDIAG or
HZSQUAAH64DIAG) contain the four-byte return code and four-byte reason
code from the IXGBRWSE service.
Action: Avoid calling
HZSQUERY when the BlockID returned within the QUAAC1HDR area is 0.
If the BlockID was not 0, notify the system programmer.
|
0C |
xxxx0C22 |
Equate Symbol: HzsqueryRsn_LogstreamGap Meaning:
A gap was detected in the logstream specified within the QUAAC1HDR
area. The requested data could not be retrieved.
The first
eight bytes of the DIAG area in the header (HZSQUAAHDIAG or HZSQUAAH64DIAG)
contain the four-byte return code and four-byte reason code from the
IXGBRWSE service.
Action: Notify the system programmer.
|
0C |
xxxx0C23 |
Equate Symbol: HzsqueryRsn_LogstreamLossOfData Meaning:
A loss of data was detected in the logstream specified within the
QUAAC1HDR area. The system received reason code IxgRsnCodeWarningLossOfData
when attempting to browse the logstream. The requested data could
not be retrieved.
The first eight bytes of the DIAG area in
the header (HZSQUAAHDIAG or HZSQUAAH64DIAG) contain the four-byte
return code and four-byte reason code from the IXGBRWSE service.
Action:
Notify the system programmer.
|
0C |
xxxx0C24 |
Equate Symbol: HzsqueryRsn_LogstreamError Meaning:
The system received an unexpected return / reason code from a system
logger function. The requested data could not be retrieved.
The
first eight bytes of the DIAG area in the header (HZSQUAAHDIAG or
HZSQUAAH64DIAG) contain the four-byte return code and four-byte reason
code from the IXGBRWSE service.
Action: Notify the system
programmer.
|
0C |
xxxx0C25 |
Equate Symbol: HzsqueryRsn_LogstreamBadData Meaning:
The data retrieved from the logstream specified within the QUAAC1HDR
area was not valid.
Action: Notify the system programmer.
|
0C |
xxxx0C26 |
Equate Symbol: HzsqueryRsn_StorageNotAvailable Meaning:
The system could not obtain working storage needed to process the
request.
Action: Try re-running the job with a larger
region size.
|
0C |
xxxx0C27 |
Equate Symbol: HzsqueryRsn_BadLogstream Meaning:
The system could not connect to the logstream specified within the
QUAAC1HDR area.
The first eight bytes of the DIAG area in the
header (HZSQUAAHDIAG or HZSQUAAH64DIAG) contain the four-byte return
code and four-byte reason code from the IXGCONN service.
Action:
Make sure that the area has been properly initialized and that the
logstream data set is accessible. Make sure that the system logger
is active.
|
10 |
— |
Equate Symbol: HzsqueryRc_CompError Meaning:
Component Error
Action: Refer to action under the individual
reason code.
|
10 |
xxxx1001 |
Equate Symbol: HzsqueryRsn_IntError Meaning:
Unexpected internal error
Action: Report the problem
to the system programmer
|