TCPIPCS subcommand

Table 1 lists the TCPIPCS subcommand options.

The TCPIPCS command contains the OPTLOCAL specification in some displays.

Table 1. Summary of new and changed Communications Server TCPIPCS subcommand
Option	Release	Description	Reason for change
CONFIG	V2R1	Supports new RNIC interface type.	Shared Memory Communications over Remote Direct Memory Access
CONFIG	V1R13	Supports new IPAQIQDX and IPAQIQDX6 interface types.	HiperSockets optimization for intraensemble data networks
HASH	V2R1	Displays information about the structure of IPv6 dynamic VIPA shadow tunnel hash tables.	Sysplex-Wide Security Associations for IPv6
IPSEC	V2R1	Displays information about IPv6 IP security shadow tunnels.	Sysplex-Wide Security Associations for IPv6
IPSEC	V2R1	Includes log limit value of the filter in the formatted information.	Limit defensive filter logging
MAP	V2R1	Includes the storage that is used for the IPv6 policy-based route tables.	IPv6 support for policy-based routing
MAP	V2R1	Displays storage usage information for IPv6 dynamic VIPA shadow tunnel hash tables.	Sysplex-Wide Security Associations for IPv6
POLICY	V2R1	IPv6 policy is included in the display of policy-based routing rules and actions.	IPv6 support for policy-based routing
PROFILE	Every release	Displays the current TCP/IP stack configuration from information in the dump by creating the profile statements that represent the configuration. In every release, some profile statements change and some new statements are added. See PROFILE.TCPIP statement and parameter changes for information about the profile statement changes for a specific release.	Release update
	V2R1	Displays the GLOBALCONFIG SMCR parameters and the new SMFCONFIG SMCRLINKEVENT and SMCRGROUPSTATISTICS subparameters.	Shared Memory Communications over Remote Direct Memory Access
	V2R1	Updates the CONVERT function to also convert IPv4 DEVICE/LINK/HOME definitions for HiperSockets and static VIPA into INTERFACE statements.	IPv4 INTERFACE statement for HiperSockets and Static VIPAs
	V1R13	Displays the new IPCONFIG and IPCONFIG6 parameters.	OSA-Express4S QDIO IPv6 checksum and segmentation offload
	V1R13	Displays the setting of the new GLOBALCONFIG NOAUTOIQDX and AUTOIQDX parameters.	HiperSockets optimization for intraensemble data networks
	V1R13	Displays the new SAF parameter if it is configured on the VIPARANGE statement.	Improved security granularity for VIPARANGE DVIPAs
	V1R12	Added support to display the new CHPIDTYPE and CHPID parameters on the INTERFACE statements for IPAQENET and IPAQENET6, and the new IPSECURITY OSMSECCLASS subparameter on the IPCONFIG6 statement.	z/OS Communications Server in an ensemble
	V1R12	The output is changed to include the new keywords and values that can be specified on the VIPADEFINE, VIPABACKUP, and VIPADISTRIBUTE statements.	Extend sysplex distributor support for DataPower for IPv6
	V1R12	Added WORKLOADQ and NOWORKLOADQ to indicate whether inbound workload queueing is enabled for IPAQENET or IPAQENET6 interfaces. This value is only displayed when INBPERF is DYNAMIC. A new CONVERT parameter was also added.	Performance improvements for sysplex distributor connection routing
PROFILE (continued)	V1R12	Displays the new DEFADDRTABLE TCP/IP profile statement. For the SRCIP statement, displays the setting of the new PUBLICADDRS parameter for JOBNAME entries.	Configurable default address selection policy table
	V1R12	Displays the setting of the new NOJOIN subparameter for the GLOBALCONFIG SYSPLEXMONITOR statement.	Control joining the sysplex XCF group
	V1R12	Displays the setting of the new DVIPA and NODVIPA parameters for the SMFCONFIG statement. Displays the setting of the new DVIPA and NODVIPA subparameters for the SMFSERVICE parameter of the NETMONITOR statement.	SMF event records for sysplex events
	V1R12	Displays the new keywords that can be specified on a VIPADISTRIBUTE statement.	Sysplex distributor support for hot-standby server
	V1R12	Displays the setting of the new CSMAIL, NOCSMAIL, CSSMTP and NOCSSMTP subparameters for the SMFSERVICE parameter of the NETMONITOR statement.	Management data for CSSMTP
ROUTE	V2R1	When the PR parameter is used to display all search tree and update tree routes for all active policy-based route tables, IPv6 routes are included in the report. When the PD parameter is used to display all search tree and update tree routes for all policy-based route tables that have been marked for deletion , IPv6 routes are included in the report.	IPv6 support for policy-based routing
ROUTE	V1R12	Support is added for a new parameter, RADV, to display all of the IPv6 routes created based on information received in router advertisement messages.	Enhancements to IPv6 router advertisement
STATE	V2R1	Supports new RNIC interface type.	Shared Memory Communications over Remote Direct Memory Access
STATE	V1R13	Supports new IPAQIQDX and IPAQIQDX6 interface types.	HiperSockets optimization for intraensemble data networks
TIMER	V2R1	For timers that are configured to do a cross-memory post, the target address space ASCB and ASID values are displayed.	Real-time application-controlled TCP/IP trace NMI
TRACE	V2R1	Displays each CTE header in a CTRACE buffer	Support for additional diagnostic information about Ctrace
TRACE	V2R1	New ALL and RCC subparameters are added. The RCC subparameter formats information about applications using the Real-time application-controlled TCP/IP trace NMI.	Real-time application-controlled TCP/IP trace NMI
TREE	V2R1	Includes the search and update trees for IPv6 policy-based route tables.	IPv6 support for policy-based routing
TTLS	V2R1	Displays new parameters on AT-TLS configuration statements.	AT-TLS support for TLS v1.2 and related features
XCF	V1R13	Displays the dynamic VIPA that was created using the bind socket call, the SIOCSVIPA or SIOCSVIPA6 ioctl call, or the MODDVIPA utility, including the new SAF resource name if it is configured.	Improved security granularity for VIPARANGE DVIPAs
XCF	V1R12	Displays information pertaining to the new HOTSTANDBY distribution method.	Sysplex distributor support for hot-standby server