Required control vector or subvector missing: One or
more control vectors or MS subvectors that are required by the receiver
to perform some function are missing from the received message, or
are not present in the required position.
Bytes 2 and 3 following the sense code contain sense-code-specific
information.
- nn00
- Byte 2 following the sense code contains the key (nn) of one of
the control vectors or subvectors that is missing, or improperly positioned.
Byte 3 is reserved (00).
Note: See the X'080C0006' sense data for
the case in which the major vector key is recognized but a subvector
representing the function to be performed cannot be identified.
- 0400
- Subvector X'04' not first.
- 0800
- Reported on destination prefix (X'08') subvector not
present.
- 0900
- Reported on destination location (X'09') subvector not
present.
- 0B00
- Reported on destination suffix (X'0B') subvector not
present.
- 2100
- Required focal point identification (X'21') subvector
not present. Already found either X'61', X'63',
or X'E1' subvector.
- 4400
- Second CV in TDU was not a CV44.
- 4600
- CV46 not present.
- 7D00
- Report code (X'7D') subvector not present.
- 8000
- First CV in TDU was not a GVC280.
- 8100
- Origin location name (X'81') subvector not present.
- 8200
- Destination location name (X'82') subvector not present.
- 9000
- Flags (X'90') subvector not present.