This section provides information about error messages that you
might encounter with IBM® Rational® Functional Tester. This section lists the
error messages by ID, explanation, system action and your response to correct
the error message.
CRFCC0002E
Unable to configure the project for ClearCase.
CRFCC0005E
Object Maps not merged due to CM failures
CRFCC0006E
Object Maps not merged because target map file is read-only
CRFCC0026E
ClearCase is unable to remove the file: fileName.
CRFCC0027E
Unable to add the script or file to ClearCase. The selected
item is not in a VOB.
CRFCC0029E
Cannot complete the ClearCase operation. Typically this is
because you need to install ClearCase type managers on your server
machine. Copy the file rtccserverextension.exe to the server machine,
{0}. Run it, then try again. For Unix servers, see the documentation.
CRFCC0030W
You cancelled the merge. The selected item is not merged
or checked in.
CRFCC0031E
You cancelled the merge. The shared map was merged and checked
in. None of the other files in the script were checked in.
CRFCC0032E
You cancelled the merge. None of the files in the script
were checked in.
CRFCC0033E
The checkin did not complete because object map could not be merged.
CRFCC0034E
Unable to update the Script Helper file. Select Script > Update Script Helper to re-create the helper. Then check in the script.
CRFCC0035E
Selected project is not a Functional Test project. Specify
another repository type.
CRFCC0036E
IBM Rational Functional Tester is currently configured for
ClearCase Remote Client. Select ClearCase Remote Client as the repository
type.
CRFCC0037E
Unable to perform operation. The functional test script needs
to be checked-out before performing this operation.
CRFCN0001E
An invalid subitem was specified or Rational Functional Tester
does not support the specified subitem.
CRFCN0002E
Attempt to perform mouse operation on co-ordinates that are off-screen.
CRFCN0003E
Attempt to perform mouse operation on co-ordinates that are
off-screen
CRFCN0004E
The requested action cannot be completed
CRFCN0253E
The page_name wizard page cannot be created.
CRFCN0254E
Configuration directory variable not set in registry. Changes will
not be saved. Do you want to continue?
CRFCN0255E
The RATIONAL_FT_CONFIGURATION_DIRECTORY environment variable
is not set or has been changed. If you continue, your changes will
not be saved. Do you want to continue?
CRFCN0256W
You are about to set a disabled JRE as the default. Are you
sure you want to continue?
CRFCN0257W
You are about to set a disabled browser as the default. Are
you sure you want to continue?
CRFCN0258W
Are you sure you want to remove the default JRE?
CRFCN0259W
Are you sure you want to remove the default browser?
CRFCN0260W
You are about to enable a currently unsupported browser.
This is not recommended, and may result in browser corruption. Are
you sure you want to continue?
CRFCN0261W
Are you sure you want to disable the default JRE?
CRFCN02620262W
Are you sure you want to disable the default browser?
CRFCN0264E
JVM configured already. The JVM [jvmName] is at the same
location.
CRFCN0265E
Browser configured already. The browser [browserName] is
at the same location.
CRFCN0266E
The name cannot be changed as specified.
CRFCN0267E
A JVM named [jvmName] already exists - retaining the old
JVM
CRFCN0268E
The name field cannot be empty. The current value, name,
is retained.
CRFCN0269E
A browser is already named. The current browser and name
are retained. browser_name.
CRFCN0270E
An Eclipse platform is already named. The current platform
and name are retained. eclipse_platform.
CRFCN0271E
Errors encountered while starting browser.
CRFCN0273W
There is already another instance of the Enabler running.
More than one Enabler instance cannot be started.
CRFCN0274W
The Application Configuration tool and Enabler cannot be
run simultaneously.
CRFCN0275W
The Object Properties Configuration Tool and Enabler cannot
be run simultaneously.
CRFCN0276E JVM_name is not a file or
directory in a Java environment. The Java Virtual Machine (JVM) cannot
be enabled.
CRFCN0279E
The JVMjvmName cannot
be enabled until after the system is rebooted.
CRFCN0286W
A few of the enablement files used by the running JVM will
be removed after the system restarts. You must not enable the JVM
after a system restart.
CRFCN0288E fileName file cannot be found
among the installation files.
CRFCN0289E
The accessibility.properties file could not be read.
CRFCN0291E
Cannot find IBM Rational Functional Tester installation directory
CRFCN0325E
The TSS_measure timer could not be started.
The exception_code exception is reported.
CRFCN0326E
The TSS_measure timer could not be stopped.
The exception_code exception is reported.
CRFCN0327E
The button_icon toolbar image could not
be created. exception_message.
CRFCN0328E
The file_name file could not be saved. exception_message.
CRFCN0329E
The message cannot be displayed correctly. message_level.
CRFCN0330E
Error trying to output to the monitor exception_message.
CRFCN0331E
The Test Manager data store cannot be accessed.
CRFCN0332W
Project name is associated with current
Rational project, but its associated test script source is missing
from this Rational project.
CRFCN0333W
Project name is associated with current
Rational project, but its associated test script source is missing.
Would you like to re-associate it to this Rational project? Choosing No will
disassociate it from the Rational project.
CRFCN0334E
Failed to reset script source data path.
CRFCN0346W
Unable to remove the asset files for script scriptname.
You can remove the script asset files using the Navigator view.
CRFCN0347W
Deleting mapname object map will make
following projectname script(s) unusable. Do you
want to delete mapname?
CRFCN0348W
Deleting datapool datapool will make following projectname script(s)
unusable. Do you want to delete datapool?
CRFCN0349W
Project project1 is associated with Rational
project project2. If you delete this project, the
corresponding script source in the Rational project will become invalid.
Would you like to proceed?
CRFCN0350W
WARNING: You don't have the proper privilege to delete the
associated test script source from TestManager datastore. Would you
like to proceed?
CRFCN0354W
This project was created with an older version product which
has been upgraded with major change. Click Yes to
upgrade the project and connect, click No to
abort. Warning: After upgrade, previous versions of the product will
not be able to connect to the project. If the project is under Source
Control, this operation will modify the server copy as well.
CRFCN0355W
This project was created with an newer version product. Incompatibilites
could arise. Would you like to continue anyway?
CRFCN0356W
This project was created with an older version product which
has been upgraded with minor change. Click Yes to
upgrade the project and connect, click No to continue.
CRFCN0357W
Test suite support may not work properly without upgrading
the project!
CRFCN0359E
The Object Map associated with script does not exist.
CRFCN0360W
You cannot start recording while the Application Configuration
Tool is open. Do you want to close the Application Configuration Tool
and start recording?
CRFCN0361W
You cannot start the Enabler while the Application Configuration
Tool is open. Do you want to close the Application Configuration Tool
and start the Enabler?
CRFCN0362W
You cannot start the Object Properties Configuration Tool
while the Application Configuration Tool is open. Do you want to close
the Application Configuration Tool and start the Object Properties
Configuration Tool?
CRFCN0364W
Couldn't find Test Object in application-under-test. Application
may not be running or enabled, or your environment may not be enabled.
Test Object may not be visible. Would you like to configure application
for testing?
CRFCN0365W
You cannot start recording while the Enabler is open. Do
you want to close the Enabler and start recording?
CRFCN0366W
You cannot start the Application Configuration Tool while
the Enabler is open. Do you want to close the Enabler and start the
Application Configuration Tool?
CRFCN0367W
You cannot start the Object Properties Configuration Tool
while the Enabler is open. Do you want to close the Enabler and start
the Object Properties Configuration Tool?
CRFCN0368W
You cannot start recording while the Object Properties Configuration
Tool is open. Do you want to close the Object Properties Configuration
Tool and start recording?
CRFCN0369W
You cannot start the Application Configuration Tool while
the Object Properties Configuration Tool is open. Do you want to close
the Object Properties Configuration Tool and start the Application
Configuration Tool?
CRFCN0370W
You cannot start the Enabler while the Object Properties
Configuration Tool is open. Do you want to close the Object Properties
Configuration Tool and start the Enabler?
CRFCN0371E
The command-line value command_value for
the option_variable option is not a valid number.
CRFCN0372E
The option_name option cannot
be found.
CRFCN0455E
Log format log_formatis not a known log
format; must be in valid_log_format
CRFCN0456E
Command line argument argument considered
to be an argument for the last -playback option
because it does not match anything else. But no -playback option
has been specified on the command line prior to this.
CRFCN0457E
An application is required to have a name
CRFCN0475E
Unable to remove the Verification Point, verification
point. The Verification Point must be removed, or the script
may not function correctly. To remove it, check the script out and
check it in again. If this fails, use ClearCase Explorer to remove
the file.
CRFCN0476E
Invalid datapool specification to iterator
CRFCN0477E
Invalid datapool equivalence class class specified
to iterator
CRFCN0478E
Variable name variableName not found in
datapool
CRFCN0480E
Invalid datapool iterator class name: class
CRFCN0481E
Unable to construct datapool iterator class: class
CRFCN0482E
Invalid datapool iterator class, not an iterator: iterator
CRFCN0500E
Invalid cell specification index in method
CRFCN0501E
Attempt to access a cell in a record that is not a member of a datapool
CRFCN0504E
Multiple matches found while looking for a role with
name "property".
CRFCN0505E
Multiple matches found while looking for a name.
CRFCN0506E
It appears that more than one instance of the HTML document name is
open. Close all duplicate browser windows except for the one being
tested and click OK to retry.
CRFCN0507E
It appears that more than one instance of the application
is running, containing a window with title appName.
Try closing instances of the application that are not being tested
and click OK to retry.
CRFCN0508E
It appears that the application has more than one identical
window open. The window caption is windowName.
Close all identical windows except for the one being tested and click OK to
retry.
CRFCN0576E
Debugging is enabled, an error was encountered, and the debugging
log includes an entry for this error. The configurations.rftcfg file
contains more than one instance of the same JRE.
CRFCN0578E
The script_name script cannot be played
back.
CRFCN0779E
The script being recorded cannot be saved.
CRFNC0783E
Application under test (AUT) is not responding while trying
to find the object : {0}.Try playing back again after restarting AUT.
If the problem persists, avoid playing back on the above object.
CRFCN0784E
Application under test (AUT) is not responding while performing
the action : {0} on control {1}. Try playing back again after restarting
AUT. If the problem persists, avoid performing the above action.
CRFCN0785E
-{0} must be followed by a playback type
CRFCN0786E
Only one -{0} allowed in the command line arguments
CRFCN0787W
Warning: The number of test objects created/registered exceeds
the number of test objects unregistered for the script. Unregister
the test objects that were not unregistered in the script using the
unregister(TestObject), unregisterAll(), and the testobject.unregister()
APIs.
CRFCN0788W
Warning: The number of test objects created/registered exceeds
the number of test objects unregistered for the script. Unregister
the test objects that were not unregistered in the script using the
unregister(TestObject), unregisterAll(), and the testobject.unregister()
APIs.
CRFCN0791E
Failed to disable browser. Browser location is {0}.
CRFCN0792E
Failed to enable browser. Browser location is {0}.
CRFCN0793E
Wrong option for dynamic find enablement
CRFCN0794E
The Google Chrome browser was not enabled properly for testing.
CRFCP0001E
Proxy format error. Expected the element DOMAIN_IMPLEMENTATION.
XML contains the element element2.
CRFWW0004E
Critical files are corrupted, missing or cannot be loaded.
Reboot your system. If problem persists please reinstall IBM Rational
Functional Tester.
CRFWW0005E
Failed to load TestManager. Please check if your system environment
has been setup properly, or re-install Rational suite.
CRFWW0006E
Problem enabling default environments for testing.
CRFWW0029W
WARNING: The integration with Rational Project will no longer
work. This includes TestManager suites and script sources. When you
associate with Rational Project again a new TestManager script source
will be created. This operation cannot be undone. Would you like to
proceed?
CRFWW0030W
The destination file exists. Do you want to overwrite it?
CRFWW0037E
Unable to create the destination directory
CRFWW0038E
Publish failed on {fileName} The following files were updated.{updatedFileList}
Do you want to undo the operation? Select No if you want to continue
publishing the rest of the files.
CRFWW0054W
The following scripts are already associated with a datapool.
Changing the datapool associated with a script can cause the script
to run incorrectly. Do you want to change the datapool associated
with each script?
CRFWW0055E
Problem associating datapool with scripts
CRFWW0065E
Please make sure that a Functional Test script is active
CRFWW0066E
Please select the line where callScript should be inserted
CRFWW0068E
Make sure that you selected one or more scripts or test folders
containing scripts and that these scripts are from the same project
as current script.
CRFWW0069W
Only scripts from the current project have been inserted
CRFWW0075W
There are two connections "{0}" and "{1}" to the same project.
But the associated test script source in current project can only
point to one of the copies. You should disconnect from one of them.
CRFWW0076E
The files for the {projectName} do not
exist. The project, {projectName}, will be disconnected.
To use {projectName} when it is part of a stopped
ClearCase view, start the view, then select {projectName} and
finally select File > Connect
to a Functional Test Project.