Before you install DB2® database products on AIX® operating systems, ensure that
the system you choose meets the necessary operating system, hardware,
software, and communications requirements.
DB2 database
products are available in several different editions. Some DB2 database products and features
are only available on specific operating systems. See DB2 database product and packaging information for a list of DB2 database products that are available on each
operating system.
To
install a DB2 database product,
the following minimum requirements must be met:
Table 1. AIX installation requirementsOperating System |
Hardware |
AIX Version
5.3- 64-bit AIX kernel is required
- AIX 5.3 Technology Level
(TL) 9 and Service Pack (SP)
2
- Minimum C++ runtime level requires the xlC.rte
9.0.0.8 and xlC.aix50.rte 9.0.0.8 (or later) filesets. These filesets
are included in the June 2008 IBM C++
Runtime Environment Components for AIX package.
AIX Version
7.1 4 - 64-bit AIX kernel is required
- AIX 7.1.0 General Availability
(GA)
- Minimum C++ runtime level requires the xlC.rte 11.1.0.0 and xlC.aix61.rte
11.1.0.0 (or later) filesets. These filesets are included in the April
2010 IBM C++ Runtime Environment
Components for AIXV11.1 package.
- The
minimum requirement for running DB2 Version
9.7 on AIX Version 7.1 is DB2 Version 9.7 Fix Pack 3 (V9.7.0.3).3
|
64-bit Common Hardware Reference
Platform (CHRP) architecture, excluding POWER3 processor-based systems. 1
All
processors that are capable of running the supported AIX operating systems.
|
- 1To verify that it is a CHRP architecture
system, issue the command lscfg and look for the
following output: Model Architecture: chrp.
For POWER3 processor-based
systems, first upgrade to POWER4 processor-based systems before installing DB2 Version 9.7. POWER3 processor-based systems
are not supported in DB2 Version
9.7.
- 2In AIX 6.1 there
are two types of Workload Partitions (WPARs): system WPARs and application
WPARs. DB2 installation is supported
only on a system WPAR. AIX 6.1
also supports the ability to encrypt a JFS2 file system or set of
files.
- 3Additional considerations for POWER7 systems:
- If you have IBM Tivoli® System
Automation for Multiplatforms (SA MP) 2.2..x
or SA MP 3.1.x
Reliable Scalable Cluster Technology (RSCT) 2.5.4.0 installed, you
require the SA MP
3.1.0.6 special package with RSCT 2.5.4.2. Version 9.7 Fix Pack 2
and later fix packs include an updated version of SA MP which
includes an RSCT level that supports POWER7 systems.
- DB2 products
running on POWER7 systems
support Active Memory™ Expansion.
- IBM Tivoli Monitoring
for Databases: DB2 Agent (ITMA)
is not supported on POWER7 systems.
- For
other considerations or to manually enable POWER7 support, see www.ibm.com/support/docview.wss?&uid=swg21420730.
- 4To use the DB2 High Availability
Feature,
you need to apply Version 9.7 Fix Pack 3 or a later fix pack. These
fix packs contain an updated version ofIBM Tivoli System
Automation for Multiplatforms (SA MP).
Note: If the minimum operating system requirements were applied
using an operating system upgrade rather than using a new operating
system installation, you must install I/O completion ports (IOCP)
separately.
You
can obtain the IOCP libraries from the AIX installation
CD and configure IOCP on the DB2 server.
For a client only installation, IOCP is not required. For more
information, see
configuring IOCP on AIX.
Software considerations
- For application development and runtime considerations, see the
topics in Supported programming languages and compilers for database
application development.
- You can download the latest IBM C++
Runtime Environment Components for AIX at
the IBM AIX XL C and C++ support website.
- (Clients only) If you plan to use Kerberos Authentication, you
require IBM Network Authentication
Service client v1.4 or later.
- Use the bosboot command to switch to the 64-bit
kernel.
To switch to a 64-bit kernel, you require root authority
and enter the following commands:
ln -sf /usr/lib/boot/unix_64 /unix
ln -sf /usr/lib/boot/unix_64 /usr/lib/boot/unix
bosboot -a
shutdown -Fr
One of the following browsers
is required to view online help and to run First Steps (
db2fs):
- Firefox 2.0 and later
- Mozilla-based browsers 1.7 and later
- An X Window System software capable of rendering a graphical user
interface is required if you want to use the DB2 Setup wizard to install a DB2 product on Linux or UNIX operating
systems.
- Live Partition Mobility (LPM) is supported in partitioned
database environments with multi physical node configurations.
- For details regarding known AIX issues, see www.ibm.com/support/docview.wss?&uid=swg21165448
Mounting considerations
For
root installations of DB2 products
on UNIX operating systems, do
not mount your file system with the nosetuid option.