Multi-adapter Bridge or PCI Bridge card slot error, do not use card slot.
Response
LED control failure, do not use slot.
The card location is not available for use. The Failing
Item with the card slot error is in the Failing Item list
for this reference code.
See SLOTERR symbolic FRU for the list of messages and a
further description of the problem detected by Licensed
Internal Code.
For this reference code the failing item list presented in
the Service Action Log (SAL), or serviceable event
view you are working with, can be different from the failing
item list documented here. That is due to the differences
in system models and features installed.
If the Service Action Log or a serviceable event viewer
on the hardware management console is available for this problem then use the
failing item list presented there for servicing this
reference code.
If a serviceable event view is not available then use the
failing item list documented here. By following the
procedures in the symbolic FRUs listed here you will isolate
to the correct FRU list based on system model and features
installed.