High Speed Link (HSL) or PCI bridge card slot I/O bridge failure.
Response
LIC detected invalid data in the I/O bus VPD. The bus and
resources associated with it may not be operational.
For this reference code the failing item list presented in
the Service Action Log (SAL), or serviceable event view
you are working with, can be different from the failing
item list documented here. That is due to the differences
in system models and features installed.
If the Service Action Log (SAL) or serviceable event
viewer on the hardware management console is available then use the
failing item list presented there for servicing this
reference code.
If a serviceable event view is not available then use the
failing item list documented here. By following the
procedures in the symbolic FRUs listed here you will isolate
to the correct FRU list based on system model and features
installed.
If the serviceable event view only indicated a frame or
enclosure see the
locations section for the frame or enclosure type. The location
of the
HSL I/O Bridge will be given in the locations tables.
NOTE: A fiber optic cleaning kit may be required for optical
HSL connections.