Follow the steps outlined in this road map for installing
your expansion unit.
To install the 5786, 5787, 7031-D24, and 7031-T24 expansion units
you must perform the following tasks. These tasks are arranged in
a series of chronological steps for installing your expansion unit.
Where appropriate links are available to provide you with additional
detail related to performing these tasks. At the completion of
each task, return to this road map for guidance related to performing
the next task.
- Unpack the expansion unit.
- Complete a parts inventory. For details, go to this link
and complete steps 1 and 2 Installing
the model 5786, or 7031-D24 into a rack.
- Verify the rack.
Note: - This step is optional. Skip to step 7 for
deskside units.
- If the rack is not installed, see Installing
the rack.
- Determine where to install the expansion unit in the rack. For
details, see Determining the location.
- Install the rail assembly into the rack. For details, see Attaching the mounting hardware to the rack.
- Install the expansion unit onto the rails. For details,
see Installing the 5786, or 7031-D24 on the rail assembly.
- Cable the expansion
unit to the server:
Review your specific system configuration
and use one of the following procedures to install your expansion
units: