Configuring I/O enclosures
View and change various I/O enclosure attributes.
After the server firmware has reached the standby or running state,
you can configure the following I/O enclosure when :
- List the status, location code, rack address, unit address, power control network identifier, and the machine type and model of each enclosure in the system.
- Change the identification indicator state on each enclosure to identify or off.
- Update the power control network identifier, enclosure serial number, and the machine type and model of each enclosure.
- Change the identification indicator state of the SPCN firmware in a enclosure to Enable or Disable.
- Remove rack and unit addresses for all inactive enclosures in the system.
To perform this operation, you must be
one of the following authority levels:
- Administrator
- Authorized service provider
To configure I/O enclosures, do the following steps:
- On the ASMI Welcome pane, specify your user ID and password, and click Log In.
- In the navigation area, expand System Configuration and select Configure I/O Enclosures.
- Select the enclosure and the desired operation. If you select Change settings, click Save setting to complete the operation.
