IBM Support

ERROR_CODE values in KNP_POLL_DATA_COLLECTION

Technote (FAQ)


Question

What do the codes in the ERROR_CODE field represent?

Answer

Code Number Code Name Condition
100 POLLSTATUS_SUCCESS Poll was successful. The poller received an expected response from the target device.
101 POLLSTATUS_NODATA SNMP only. A GetNext? traversal of a columnar object returned no data. Either the table is empty, the target device does not implement the table, or the SNMP credentials being used don't have access to the table.
102 POLLSTATUS_SNMPTIMEOUT SNMP only. The request timed out after exhausting the configured retry count.
103 POLLSTATUS_ICMPTIMEOUT ICMP only. The request timed out after exhausting the configured retry count.
104 POLLSTATUS_DISPATCHBUSY SNMP only. Internal request dispatch queue full. This is highly unlikely to happen.
105 POLLSTATUS_ASNERROR Error code 105 is unused.
106 POLLSTATUS_PDUERROR SNMP only. This is set in two situations:

1. When we receive an error packet with an invalid error-index value (I.e. Greater than the number of request varbinds)

2. When using SNMPv3, we receive an unexpected Report PDU.

107 POLLSTATUS_KEYERROR SNMPv3 only. The poller failed to calculate the keys necessary for SNMPv3 message exchange. This is unlikely to occur.
108 POLLSTATUS_HANDLER SNMP only. The poller received a Report PDU containing the snmpUnknownPDUHandlers counter. This is unlikely to occur, unless the target device is misconfigured.
109 POLLSTATUS_NOICMPSOCKET ICMP only. No ICMP echo request was sent because the poller failed to create a raw socket. This is normally due to running as a non-root without having run the setup_run_as_setuid_root.sh script.
110 POLLSTATUS_NOACCESSDISCOVERED SNMP only. There are one or more sets of SNMP access credentials configured (in the Discovery Configuration Password panel) whose address or subnet match the device being polled, but the poller was unable to successfully poll the device using any of these credentials.
111 POLLSTATUS_NOACCESSCONFIGURED SNMP only. There are no SNMP access credentials configured (in the Discovery Configuration Password panel) whose address or subnet match the device being polled. SNMP polling will not have been attempted.
112 POLLSTATUS_NUMOUTOFRANGE The polled value was larger than can be stored in a 32-bit integer field. This is a limitation of the current schema due to requirements of integration with TDW.
201 POLLSTATUS_BADSECLEV SNMPv3 only. The target device responded with a Report PDU containing the usmStatsUnsupportedSecLevels counter. This indicates that the target device does not support the (ITNM) configured SNMPv3 security level.
203 POLLSTATUS_UNKNOWNUSER SNMPv3 only. The target device responded with a Report PDU containing the usmStatsUnknownUserNames counter. This indicates that the target device does not know about the (ITNM) configured SNMPv3 user.
205 POLLSTATUS_WRONGDIGEST SNMPv3 only. The target device responded with a Report PDU containing the usmStatsWrongDigests counter. The target device disagrees with the poller's calculation of the SNMPv3 message authentication digest.
206 POLLSTATUS_DECRYPT SNMPv3 only. The target device responded with a Report PDU containing the usmStatsDecryptionErrors counter. The target device decrypt an SNMPv3 message sent by the poller.

Product Alias/Synonym

Precision IP
TDW
ITNM

Document information

More support for: Tivoli Network Manager IP Edition

Software version: 3.8, 3.9

Operating system(s): AIX, Linux, Solaris, Windows

Reference #: 1422092

Modified date: 24 February 2014