IBM Support

PI94994: SERVICE FOR Z/OS DEBUGGER 14.1.

A fix is available

Subscribe

You can track all active APARs for this component.

APAR status

  • Closed as program error.

Error description

  • z/OS Debugger service for
    IBM Developer for z Systems 14.1.3
     IBM Debug for z Systems 14.1.3
    
    
    --- Features ---
    
    -IMS Transaction Isolation - add option to preserve original
     PSB.  See the new EQAOPTS command IMSISOORIGPSB for further
     information.
    
    -Load Module Analyzer - Support Toolkit for Swift on z/OS.
    
    -Create EQACCOPT sample Code Coverage EQAOPTS for User's Guide
     Appendix E.
    
    --- End Features ---
    
    
    --- Service ---
    
    -Exception in EQA00ANC with Smart/Restart.
     (PI56113 at 13.1)
    
    -If an IMS Region with the IMS Transaction Isolation
     customization is not running, then if DTU option 4.5 is run
     4  IMS TM Debugging
       5  IMS Transaction Isolation
     then EQANIPSB ABENDS0C4 at offset x'4BA' is possible.
     (PI94265 at 14.1)
     (PI89826 at 13.1)
    
    -"AT ENTRY entryName" in the remote debugger may not set entry
     breakpoint as expected when the load module has an alias name.
    
    -IMS Transaction Isolation ABEND in IWXMSCTE due to DSA
     overlay.  The exit sharing code in EQATIEXT isn't properly
     saving and restoring its DSA around calls to the client's
     DFSMSCE0 exit points.
     (PI93453 at 13.1)
    
    -The JCL analyzer fails to resolve all substitution symbols in
     DD cards, if the DD cards override a DD in the invoked PROC.
    
    -If a DTU user's job card from DTU option 0 contains JES2
     control statements, the resulting private MPR JCL is not
     formatted correctly when the user performs the START action on
     DTU 4.5.  For example, the following DTU 0 input:
    
     //USRT001Z JOB MSGLEVEL=(1,1),
     //   TIME=1440,MSGCLASS=H,NOTIFY=&SYSUID.
     /*JOBPARM SYSAFF=*
     //*
    
     Will result in the following job card:
    
     //USRT001Z JOB CLASS=A,MSGCLASS=H,MSGLEVEL=(1,1),
     // NOTIFY=&SYSUID.JOBPARMSYSAFF=*,REGION=0M,TIME=1440
    
    -LMA (Load Module Analyzer) does not show COMPOPTS or valid
     LEINFO for COBOL V2/V3/V4  CSECTS if COBOL V5/V6 CSECTS are in
     the same program object.  The problem is related to how the
     C_CODE and B_TEXT segments are ordered in the program object.
    
     FIXCAT KEYWORD:
     COB0501T/K COB0502T/K COB0601T/K COB0602T/K
    
     (PI94034 at 13.1)
    
    -Debug Tool not starting up in remote debug session when using
     delay debug.
     EQA9999W - FeName=EQACSMTP Loc=230 Func=SHUTDO Rc=-1 Fc=10108
     (PI82494 at 13.1)
    
    -STC Userid used in IMS CC scenario instead of Userid
     associated with the transaction.
     CCOUTPUT will show Userid which started the IMS region and not
     the Userid running the transaction.
     (PI95556 at 13.1)
    
    -STEP OVER a PERFORM statement not working for COBOL V5+
     programs in Debug Tool.
    
     FIXCAT KEYWORD:
     COB0501T/K COB0502T/K COB0601T/K COB0602T/K
    
     (PI95699 at 13.1)
    
    -ABEND in EQARCL4+'116AB4'x during Enterprise COBOL V5+ debug
     session.
    
     FIXCAT KEYWORD:
     COB0501T/K COB0502T/K COB0601T/K COB0602T/K
    
     (PI96490 at 13.1)
    
    -DTU option 2 Debug Tool Setup File
     (and others that process JCL via the JCL Analyzer, EQASUJCL):
    
      - When processing JCL which contains a CONTROL-M statement,
        an error message like
    
         CEE0454S The message number 1026 could not be found for
         facility ID EQA.
    
        could be issued, and the JCL is not processed.
    
      - When processing JCL which contains no JOB card, an error
        message like
    
        CEE3204S The system detected a protection exception (System
        Completion Code=0C4).
        From entry point DMHGetMessage at compile unit offset
        +0000011C at entry offset +0000011C at address 2AD3F8DC
    
        could be issued, and the JCL is not processed.
    
     (PI96647 at 13.1)
    
    -No Code Coverage report regenerated in z/OS Debugger v14.0
     running in standard mode if job ABENDs.
     (PI90554 at 14.0)
    
    -At RD/z levels 9.5.1.6, when debugging a COBOL V4 program some
     variables don't change after a MOVE statement.
    
     Example :
     In the Source program
    
     MOVE 'S' TO TEST
    
     When debugging the value of TEST is '0' instead of 'S' after
     the MOVE statement.
    
     (PI93777 at RD/z 9.5.1)
    
    -Remote debug session, standard mode: During the debugging of a
     PL/I program, the variable view is flashing with an error
     message.
     (PI95372 at 14.1)
    
    -When the debugger is running as ID/z, issue a better message
     if the workstation code can't be reached or isn't licensed.
    
    -IMS ABEND after activating transaction isolation exits.
     After activated transaction isolation IMS ABENDs with U4095,
     emergency restart was not possible. Sysprogs removed exits,
     then emergency restart was possible.
     (PI94265 at 14.1)
    
    -Load Module Analyzer needs to be able to show RMODE(64) (new
     for z/OS 2.3) in Module line.
    
    -Load Module Analyzer does not show LEINFO or COMPOPTS for 64
     bit Enterprise PL/I.
    
    -z/OS Debugger remote Code Coverage - no Code Coverage
     information when assembler code abends.
     (PI95324 at 14.1)
    
    -Remove reference to old Coverage Utility in EQAWISVC sample.
    
    -Incorrect paragraph highlighting in visual debugging.
     (PI94507 at 14.1)
    
    -IMS Transaction Isolation shows error in JOBLOG:
     IMS  TRANSACTION ID DOES NOT MATCH <ITR> TAG IN THE PROFILE
     DATA SET. IMS TRANSACTION ID: EQATxxxx
     (PI96983 at 14.1)
    
    -In z/OS Debugger it is possible to configure in EQASTART a
     different dataset name for SEQATLIB. This definition is not
     used in IMS Transaction Isolation REXX EQAXTIMS.
     (PI95089 at 14.1)
    
    -SVC screening and OPEN TYPE=J with an open exit can cause
     ABENDS05C, Reason code=703.
     (PI97041 at 14.1)
    
    -Properly handle job card processing for the ID/z "Remote IMS
     Application with Isolation" debug launch.
    
    -IMS Transaction Isolation EQANICRT does not handle creating
     lots of resource definitions.
     Job EQA.SEQASAMP(EQAWICRT) does not create the correct output
     for IMS TYPE2 commands or STAGE1 input.
     For DD EQARESDS nothing is produced or sometimes partial
     output is produced.
     For DD EQATY2DS partial output is produced.
     (PI97564 at 13.1)
    
    -IMS Transaction Isolation private MPR should use debug userid
     for substitution.
     The generic userid will not be recognized and used as &&userid
     pattern for substituting dataset name.
     (PI97562 at 14.1)
    
    -Under some conditions, IMS Transaction Isolation is unable to
     find a region to clone if the transaction has an
     ENQCT >= 10000.
    
    -IBM z/OS Debugger ABEND in standard mode when program contains
     an HLASM compile unit with no SYSADATA file available for it.
     (PI97566 at 14.1)
    
    --- End Service ---
    

Local fix

Problem summary

  • ****************************************************************
    * USERS AFFECTED:                                              *
    * z/OS Debugger 14.1 users who need the features or have the   *
    * problems described in the Problem Description.               *
    ****************************************************************
    * PROBLEM DESCRIPTION:                                         *
    * z/OS Debugger service for                                    *
    *  IBM Developer for z Systems 14.1.3                          *
    *  IBM Debug for z Systems 14.1.3                              *
    *                                                              *
    *                                                              *
    * --- Features ---                                             *
    *                                                              *
    * -IMS Transaction Isolation - add                             *
    *  option to preserve original PSB.  See                       *
    *  the new EQAOPTS command IMSISOORIGPSB                       *
    *  for further information.                                    *
    *                                                              *
    * -Load Module Analyzer - Support                              *
    *  Toolkit for Swift on z/OS.                                  *
    *                                                              *
    * -Create EQACCOPT sample Code Coverage                        *
    *  EQAOPTS for User's Guide Appendix E.                        *
    *                                                              *
    * --- End Features ---                                         *
    *                                                              *
    *                                                              *
    * --- Service ---                                              *
    *                                                              *
    * -Exception in EQA00ANC with                                  *
    *  Smart/Restart.                                              *
    *  (PI56113 at 13.1)                                           *
    *                                                              *
    * -If an IMS Region with the IMS                               *
    *  Transaction Isolation customization                         *
    *  is not running, then if DTU option                          *
    *  4.5 is run                                                  *
    *  4  IMS TM Debugging                                         *
    *    5  IMS Transaction Isolation                              *
    *  then EQANIPSB ABENDS0C4 at offset                           *
    *  x'4BA' is possible.                                         *
    *  (PI94265 at 14.1)                                           *
    *  (PI89826 at 13.1)                                           *
    *                                                              *
    * -"AT ENTRY entryName" in the remote                          *
    *  debugger may not set entry breakpoint                       *
    *  as expected when the load module has                        *
    *  an alias name.                                              *
    *                                                              *
    * -IMS Transaction Isolation ABEND in                          *
    *  IWXMSCTE due to DSA overlay.  The                           *
    *  exit sharing code in EQATIEXT isn't                         *
    *  properly saving and restoring its DSA                       *
    *  around calls to the client's DFSMSCE0                       *
    *  exit points.                                                *
    *  (PI93453 at 13.1)                                           *
    *                                                              *
    * -The JCL analyzer fails to resolve all                       *
    *  substitution symbols in DD cards, if                        *
    *  the DD cards override a DD in the                           *
    *  invoked PROC.                                               *
    *                                                              *
    * -If a DTU user's job card from DTU                           *
    *  option 0 contains JES2 control                              *
    *  statements, the resulting private MPR                       *
    *  JCL is not formatted correctly when                         *
    *  the user performs the START action on                       *
    *  DTU 4.5.  For example, the following                        *
    *  DTU 0 input:                                                *
    *                                                              *
    *  //USRT001Z JOB MSGLEVEL=(1,1),                              *
    *  //   TIME=1440,MSGCLASS=H,                                  *
    *  //   NOTIFY=&SYSUID.                                        *
    *  / *JOBPARM SYSAFF=*                                         *
    *                                                              *
    *  Will result in the following job                            *
    *  card:                                                       *
    *                                                              *
    *  //USRT001Z JOB CLASS=A,MSGCLASS=H,                          *
    *  // MSGLEVEL=(1,1),                                          *
    *  // NOTIFY=&SYSUID.JOBPARMSYSAFF=*,                          *
    *  // REGION=0M,TIME=1440                                      *
    *                                                              *
    * -LMA (Load Module Analyzer) does not                         *
    *  show COMPOPTS or valid LEINFO for                           *
    *  COBOL V2/V3/V4  CSECTS if COBOL V5/V6                       *
    *  CSECTS are in the same program                              *
    *  object.  The problem is related to                          *
    *  how the C_CODE and B_TEXT segments                          *
    *  are ordered in the program object.                          *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0501T/K COB0502T/K                                       *
    *  COB0601T/K COB0602T/K                                       *
    *                                                              *
    *  (PI94034 at 13.1)                                           *
    *                                                              *
    * -Debug Tool not starting up in remote                        *
    *  debug session when using delay debug.                       *
    *  EQA9999W - FeName=EQACSMTP Loc=230                          *
    *  Func=SHUTDO Rc=-1 Fc=10108                                  *
    *  (PI82494 at 13.1)                                           *
    *                                                              *
    * -STC Userid used in IMS CC scenario                          *
    *  instead of Userid associated with the                       *
    *  transaction.                                                *
    *  CCOUTPUT will show Userid which                             *
    *  started the IMS region and not the                          *
    *  Userid running the transaction.                             *
    *  (PI95556 at 13.1)                                           *
    *                                                              *
    * -STEP OVER a PERFORM statement not                           *
    *  working for COBOL V5+ programs in                           *
    *  Debug Tool.                                                 *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0501T/K COB0502T/K                                       *
    *  COB0601T/K COB0602T/K                                       *
    *                                                              *
    *  (PI95699 at 13.1)                                           *
    *                                                              *
    * -ABEND in EQARCL4+'116AB4'x during                           *
    *  Enterprise COBOL V5+ debug session.                         *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0501T/K COB0502T/K                                       *
    *  COB0601T/K COB0602T/K                                       *
    *                                                              *
    *  (PI96490 at 13.1)                                           *
    *                                                              *
    * -DTU option 2 Debug Tool Setup File                          *
    *  (and others that process JCL via the                        *
    *  JCL Analyzer, EQASUJCL):                                    *
    *                                                              *
    *   - When processing JCL which contains                       *
    *     a CONTROL-M statement, an error                          *
    *     message like                                             *
    *                                                              *
    *      CEE0454S The message number 1026                        *
    *      could not be found for facility                         *
    *      ID EQA.                                                 *
    *                                                              *
    *     could be issued, and the JCL is                          *
    *     not processed.                                           *
    *                                                              *
    *   - When processing JCL which contains                       *
    *     no JOB card, an error message like                       *
    *                                                              *
    *     CEE3204S The system detected a                           *
    *     protection exception (System                             *
    *     Completion Code=0C4).                                    *
    *     From entry point DMHGetMessage at                        *
    *     compile unit offset +0000011C at                         *
    *     entry offset +0000011C at address                        *
    *     2AD3F8DC                                                 *
    *                                                              *
    *     could be issued, and the JCL is                          *
    *     not processed.                                           *
    *                                                              *
    *  (PI96647 at 13.1)                                           *
    *                                                              *
    * -No Code Coverage report regenerated                         *
    *  in z/OS Debugger v14.0 running in                           *
    *  standard mode if job ABENDs.                                *
    *  (PI90554 at 14.0)                                           *
    *                                                              *
    * -At RD/z levels 9.5.1.6, when                                *
    *  debugging a COBOL V4 program some                           *
    *  variables don't change after a MOVE                         *
    *  statement.                                                  *
    *                                                              *
    *  Example :                                                   *
    *  In the Source program                                       *
    *                                                              *
    *  MOVE 'S' TO TEST                                            *
    *                                                              *
    *  When debugging the value of TEST is                         *
    *  '0' instead of 'S' after the MOVE                           *
    *  statement.                                                  *
    *                                                              *
    *  (PI93777 at RD/z 9.5.1)                                     *
    *                                                              *
    * -Remote debug session, standard mode:                        *
    *  During the debugging of a PL/I                              *
    *  program, the variable view is                               *
    *  flashing with an error message.                             *
    *  (PI95372 at 14.1)                                           *
    *                                                              *
    * -When the debugger is running as ID/z,                       *
    *  issue a better message if the                               *
    *  workstation code can't be reached or                        *
    *  isn't licensed.                                             *
    *                                                              *
    * -IMS ABEND after activating                                  *
    *  transaction isolation exits.                                *
    *  After activated transaction isolation                       *
    *  IMS ABENDs with U4095, emergency                            *
    *  restart was not possible. Sysprogs                          *
    *  removed exits, then emergency restart                       *
    *  was possible.                                               *
    *  (PI94265 at 14.1)                                           *
    *                                                              *
    * -Load Module Analyzer needs to be able                       *
    *  to show RMODE(64) (new for z/OS 2.3)                        *
    *  in Module line.                                             *
    *                                                              *
    * -Load Module Analyzer does not show                          *
    *  LEINFO or COMPOPTS for 64 bit                               *
    *  Enterprise PL/I.                                            *
    *                                                              *
    * -z/OS Debugger remote Code Coverage -                        *
    *  no Code Coverage information when                           *
    *  assembler code abends.                                      *
    *  (PI95324 at 14.1)                                           *
    *                                                              *
    * -Remove reference to old Coverage                            *
    *  Utility in EQAWISVC sample.                                 *
    *                                                              *
    * -Incorrect paragraph highlighting in                         *
    *  visual debugging.                                           *
    *  (PI94507 at 14.1)                                           *
    *                                                              *
    * -IMS Transaction Isolation shows error                       *
    *  in JOBLOG:                                                  *
    *  IMS  TRANSACTION ID DOES NOT MATCH                          *
    *  <ITR> TAG IN THE PROFILE DATA SET.                          *
    *  IMS TRANSACTION ID: EQATxxxx                                *
    *  (PI96983 at 14.1)                                           *
    *                                                              *
    * -In z/OS Debugger it is possible to                          *
    *  configure in EQASTART a different                           *
    *  dataset name for SEQATLIB. This                             *
    *  definition is not used in IMS                               *
    *  Transaction Isolation REXX EQAXTIMS.                        *
    *  (PI95089 at 14.1)                                           *
    *                                                              *
    * -SVC screening and OPEN TYPE=J with an                       *
    *  open exit can cause ABENDS05C, Reason                       *
    *  code=703.                                                   *
    *  (PI97041 at 14.1)                                           *
    *                                                              *
    * -Properly handle job card processing                         *
    *  for the ID/z "Remote IMS Application                        *
    *  with Isolation" debug launch.                               *
    *                                                              *
    * -IMS Transaction Isolation EQANICRT                          *
    *  does not handle creating lots of                            *
    *  resource definitions.                                       *
    *  Job EQA.SEQASAMP(EQAWICRT) does not                         *
    *  create the correct output for IMS                           *
    *  TYPE2 commands or STAGE1 input.                             *
    *  For DD EQARESDS nothing is produced                         *
    *  or sometimes partial output is                              *
    *  produced.                                                   *
    *  For DD EQATY2DS partial output is                           *
    *  produced.                                                   *
    *  (PI97564 at 13.1)                                           *
    *                                                              *
    * -IMS Transaction Isolation private MPR                       *
    *  should use debug userid for                                 *
    *  substitution.                                               *
    *  The generic userid will not be                              *
    *  recognized and used as &&userid                             *
    *  pattern for substituting dataset                            *
    *  name.                                                       *
    *  (PI97562 at 14.1)                                           *
    *                                                              *
    * -Under some conditions, IMS                                  *
    *  Transaction Isolation is unable to                          *
    *  find a region to clone if the                               *
    *  transaction has an ENQCT >= 10000.                          *
    *                                                              *
    * -IBM z/OS Debugger ABEND in standard                         *
    *  mode when program contains an HLASM                         *
    *  compile unit with no SYSADATA file                          *
    *  available for it.                                           *
    *  (PI97566 at 14.1)                                           *
    *                                                              *
    * --- End Service ---                                          *
    ****************************************************************
    * RECOMMENDATION:                                              *
    * Installations that need these features or problem fixes      *
    * should install this service.                                 *
    ****************************************************************
    New features and miscellaneous service.
    

Problem conclusion

  • New features and service available.
    

Temporary fix

Comments

APAR Information

  • APAR number

    PI94994

  • Reported component name

    ZOS DEBUGGER

  • Reported component ID

    5724T0713

  • Reported release

    E10

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    YesHIPER

  • Special Attention

    NoSpecatt / Xsystem

  • Submitted date

    2018-03-12

  • Closed date

    2018-06-08

  • Last modified date

    2018-07-02

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

    UI56228

Modules/Macros

  • EQA10SID EQA17CUR EQA0SNTC EQA00CEM EQA04PST EQA18QNS EQAS0GFU
    EQA10EMC EQA10PBK EQA00CEC EQA00CEE EQA00EHI EQAS0DBH EQAS0DBJ
    EQA08PFM EQAS0DBG EQA10HRS EQA00GLV EQARCCDA EQA00CCV EQASPDBI
    EQA00XML EQA00CCX EQA10RET EQA05CUS EQA10FND EQA0SMSU EQA00IPD
    EQA30SRT EQA00EHB EQA30KBM EQAS0HKS EQAS0HKN EQA12CES EQA30PT
    EQA0S9LB EQA10DMM EQA10QFY EQA12CEI EQA0CFUN EQA00REG EQA12LX1
    EQA12CED EQAD3CSR EQA00XPR EQA10PDM EQAS0INT EQA10AFS EQA18DSP
    EQAS0MVS EQA50PRE EQA13DCL EQAMVS31 EQA50PRO EQA50LIS EQA00CEX
    EQAAFSPS EQA08BLK EQA12SCN EQA0S0YE EQA0S0YC EQA00SET EQAYBGID
    EQAS0GIV EQA00ABE EQAS0EH2 EQA00AEI EQACIC32 EQA17SYA EQA17SYC
    EQAS0FIN EQA07STT EQA17SYE EQA10TOG EQAS0DEH EQA10BKS EQA10BKT
    EQA14CAL EQAS0DEI EQA10BKP EQA10ER1 EQAS0SBM EQA10BKL EQA10ER0
    EQA07EXP EQA0SINP EQA00PBK EQA10BKE EQAEV006 EQA0S4CN EQA00CIC
    EQA10BKC EQA10CMD EQA13SCN EQA10BKD EQA00EMG EQA00AEH EQACIC41
    EQARCI3E EQA05PST EQAS7BLK EQAS0EHI EQAS0EHB EQA10GTO EQAZPCM
    EQASUJCL EQA00GPA EQANMEST EQA10NAM EQA00RES EQA00QCS EQA00CHG
    EQA12CEX EQA12LXB EQA50LOG EQAS0CEM EQA00GSV EQA30STR EQACSEXE
    EQAS0M99 EQA30STO EQAS0CEE EQA00TMM EQA50FC1 EQA0SDBI EQA50FC2
    EQA00PDM EQA10AKA EQARCVND EQA00DMM EQA00QFY EQA13CEX EQA13LXB
    EQA18CUR EQA0SCBP EQA0SLSE EQANCFRM EQA00ENV EQANIPSB EQAS0SET
    EQAS0ABE EQA13LX1 EQA10BLK EQA0S4DS EQA14DCL EQA07CUS EQA00DLD
    EQADCREP EQA10CND EQAYLIST EQA10DPA EQACSSIF EQA10DTC EQA14CEX
    EQA00BKP EQA00OEH EQA00OEI EQARCPDC EQARCOBD EQA08CUS EQA10DSE
    EQA00ER0 EQA00ER1 EQA0YCUS EQA08STT EQA50INT EQA50INP EQA10ALO
    EQA10TRA EQAS0QCS EQA08EXP EQA00FRE EQA00NAM EQA10BNK EQA50IMW
    EQA00TMX EQA10LAM EQA50WIN EQATIEDT EQA00GTO EQAS0REG EQA0SXR1
    EQALMTBL EQA10EXE EQASVC99 EQA0SIPD EQA0XCUS EQA10MGF EQA14SCN
    EQAS7CUS EQA0CIC2 EQA10MGA EQAS0EMG EQADBGET EQASXPMT EQA00BML
    EQA10MG0 EQA10QNS EQA10MG1 EQA18SYA EQA18SYE EQA18SYC EQAS7EXP
    EQA30PST EQA07PST EQA10LDD EQAW3Z3  EQA50LS1 EQA14LX1 EQA50LS2
    EQA10BPR EQA50LS0 EQAW3Z6  EQANCREL EQA10BPP EQA10BPQ EQA00CND
    EQA00BLD EQA10ANL EQA10DTL EQA50XIO EQAS7STT EQACCOPT EQA00BLK
    EQA10LCM EQA1S4LB EQA14LXB EQA10MEM EQA10RST EQA10CVC EQA0SDLD
    EQA08PST EQASXCUS EQA0SRGU EQANICTL EQA00DTA EQA0S4LB EQA00DTC
    EQA00TSR EQAS0DMM EQA00LBL EQA30NTC EQA00DSF EQA10CUS EQA17DCL
    EQA00OHT EQA00OHV EQA0SXU1 EQA10STU EQAYASSC EQA00OHB EQANCABE
    EQA00OHC EQA10STM EQA00OHE EQARCTRC EQA00OHH EQA00OHI EQA0SQFY
    EQAS0GTO EQA00OHL EQA10EXX EQA30DU  EQA00BND EQA00LAM EQAS0NAM
    EQA0SCHG EQACSCOM EQA10EXM EQA10EXN EQA50WN1 EQA50WN2 EQA00TRA
    EQA0SXUT EQA00ALO EQA50WN0 EQA10LIN EQA10HAD EQA00EXE EQA30LNK
    EQA0SCL2 EQA0SCL1 EQAXPL31 EQA00SRT EQA00KBM EQA00QNS EQA02PFM
    EQAXOPT  EQA12DSP EQA00LDR EQA10ASN EQANICRT EQA0SXRI EQAS7PST
    EQA00LDU EQA00LDW EQA10QRY EQAD3XXT EQA00LDX EQA10QRZ EQA00LDY
    EQAYBCNM EQAYSMMN EQALDR64 EQA0SEMC EQADBFIL EQAD3UT1 EQA00LDD
    EQA00TTL EQANCTER EQARCL4  EQA00MEM EQA00ANC EQA00LCM EQAS0BLK
    EQA00EVH EQA10SVC EQA00DTL EQA0STKH EQAS0CND EQA00ANL EQA50VIO
    EQAYFGID EQA00BPP EQA00RPB EQALDR31 EQA17CED EQA30INT EQA00CVC
    EQA17LX1 EQA00POP EQA17CEI EQA03PFM EQA0SBKP EQA50OBJ EQA10SYE
    EQACSTCP EQA10SYC EQA17CEX EQA17LXB EQA00CUS EQA12QNS EQAS0OHH
    EQARCEXP EQACSINT EQA00CTX EQAS0DU  EQAS0OHC EQASYCUS EQA00STO
    EQAEVDBG EQA00STR EQA00TVT EQA00STT EQA00STU EQA10PRD EQA0S9YE
    EQA10PRC EQA0S9YC EQA0S9YA EQA30SBM EQA0SUT1 EQA02BLK EQAS0BND
    EQA0SUT2 EQA10LIT EQA50END EQA13QNS EQA0SNAM EQA10LN2 EQA10LN3
    EQA10LN0 EQA10LN1 EQA00RUN EQA10MON EQA00NML EQA10OSM EQA00QRY
    EQAS0OHT EQA0SCLU EQA12CUR EQAS0OHV EQAS0DSF EQA03BLK EQA50PC1
    EQAWISVC EQA50PC2 EQA50PC0 EQANCDBG EQA0AIPD EQA0SCMD EQA17SCN
    EQA10PTP EQA0AIP4 EQA00RSV EQA18DCL EQA0AIP3 EQA14CMS EQA0AIP2
    EQA0AIP1 EQA13DSP EQADCMGR EQAS0DTL EQA13MDV EQAS0EVH EQA50REQ
    EQAS0ANC EQA00SVC EQA00CVT EQA0SBLD EQA0AIP6 EQA0AIP5 EQA04CMS
    EQA14EVL EQA0SDTL EQA10OUT EQA10FCI EQA50COL EQAS0MGA EQA00PST
    EQA10VC3 EQA0SRPC EQA10LOG EQA10VC1 EQA10VC2 EQANMDBG EQA10VC0
    EQA0SLDD EQACTL   EQA10CV  EQAS0KBM EQAS0QNS EQA0SRQ1 EQA00RWD
    EQA01SVC EQA0SRQ2 EQA0SRQ3 EQA0SRQ4 EQAS0SRT EQA10FBP EQA14QNS
    EQA50CO2 EQAS0STO EQA00FA  EQAS0STR EQA50CO0 EQA50CO1 EQA01SV2
    EQA10LNK EQA10NRM EQA10VAT EQA04PFM EQA10VAR EQADBLNX EQA00LIS
    EQA00NMU EQA0SEXA EQA0SEXE EQA50MAP EQA18SCN EQASAIP1 EQAS0POP
    EQA00GCC EQASAIP6 EQASAIP3 EQASAIP2 EQA00LMS EQASAIP5 EQASAIP4
    EQA0STRE EQA00OSX EQA05PFM EQA0SCPU EQA50FSC EQANIAFE EQAS0CUS
    EQA0SUTI EQA12SYE EQA00DU  EQA12SYC EQA12SYA EQA02CUS EQAS0STT
    EQASAIPD EQA0CINF EQA00LLF EQA00LLH EQA14MDV EQA18CED EQA18LX1
    EQA14DSP EQA18CEI EQA02STT EQA00LLT EQA50TMN EQA0SBPP EQA13CUR
    EQA02EXP EQA00CV  EQA04BLK EQA00A64 EQADCCXR EQA0SDTC EQA0SRP1
    EQA18CEX EQA18LXB EQA0SRP2 EQA0SRP3 EQA0SLCM EQA0SRP4 EQA00LLC
    EQADCCN1 EQADCCN2 EQADCVSD EQADCVSA EQANCZFS EQADCCN0 EQAS0RUN
    EQADCCN3 EQADCCN4 EQA10LST EQA03STT EQA00HFS EQA50SRV EQA50PM1
    EQA50PM2 EQA00GDV EQA03EXP EQA10LSE EQA05BLK EQA50PM0 EQA30TKI
    EQA00LNG EQA00GDD EQA00VAR EQARCHEX EQANCZGS EQAS3UT1 EQA00GDF
    EQA00LNK EQA00GDG EQA30DMM EQA00GDP EQASSUT1 EQA50MEM EQA13SWC
    EQAS0NMU EQADCCNH EQA10DAT EQA10XIF EQANCHAB EQA10DES EQATIEXT
    EQAS0PST EQA0SEXN EQACIC51 EQA0OIP5 EQA10GL3 EQA0OIP6 EQA0SEXP
    EQA0OIP3 EQA10GL1 EQA0OIP4 EQA10GL2 EQA50DSP EQA0OIP1 EQA0PDBI
    EQA0OIP2 EQA10FIN EQA10GL0 EQAXTIMS EQASG006 EQA0SEXU EQA02PST
    EQA0SEXX EQANISET EQAS0RWD EQA00GFU EQA00GFV EQANCRTO EQA00MSG
    EQA10DDT EQA10HLS EQA10INT EQAL6Z3  EQAL6Z6  EQA10MVS EQA14CUR
    EQA10INP EQA50UTL EQA10MVO EQAS0A64 EQA30HSH EQA0SRSM EQA0S4YE
    EQA13SYE EQA0SDU  EQA00NTC EQA03CUS EQA10LTB EQA0S4YC EQA13SYC
    EQA0S4YA EQA13SYA EQA10TGA EQA00HKN EQA10M99 EQA17DSP EQA00DCL
    EQA00LST EQAS0OSM EQA00HKS EQADCTSQ EQA10LX0 EQA00GIV EQA10LX1
    EQANBSWT EQA00LSE EQA04CUS EQACMDRV EQASUER0 EQANPCNH EQASUER1
    EQA00DBG EQALMBND EQA00DBH EQA00DBI EQA00DBJ EQA04STT EQAS0LNK
    EQAS0LNG EQA04API EQADXPMT EQA03ASN EQA04EXP EQA1S9LB EQA50MIO
    EQA0OIPD EQA10IPD EQA00LRC EQA17QNS EQA10CCV EQAS0LMS EQA10XML
    EQA00DEH EQA50SUF EQAD3PXT EQA00DEI EQALMPFX EQA00FIN EQA12DCL
    EQAMVS64 EQANPCN1 EQA0SPRD EQA00EH2 EQANPCN0 EQA05STT EQAIIRMG
    EQA14PRF EQAYVTAM EQA05EXP EQARCDBG EQANPCN2 EQA07BLK EQA50STR
    EQA02LOC EQA00SBM EQAS0GDV EQANXPOP EQA30TK  EQANCLDE EQAS0GDP
    EQADPITR EQA14SYA EQAXFOR  EQA14SYC EQA14SYE EQA03PST EQA50PNL
    EQALMPGM EQA00INT EQA10FLO EQA10SEV EQADBSRT EQA10SET EQAXSIO
    EQA50PMN EQALMA   EQANMPOP EQA50CTL EQAOPTS
    

Fix information

  • Fixed component name

    ZOS DEBUGGER

  • Fixed component ID

    5724T0713

Applicable component levels

  • RE10 PSY UI56228

       UP18/06/15 P F806 ¢

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.



Document information

More support for: z/OS family

Software version: E10

Reference #: PI94994

Modified date: 02 July 2018