IBM Support

PH07787: SERVICE FOR Z/OS DEBUGGER 14.1.

A fix is available

Subscribe

You can track all active APARs for this component.

APAR status

  • Closed as program error.

Error description

  • z/OS Debugger service for
    IBM Developer for z Systems Enterprise Edition 14.1.7
     IBM Developer for z Systems 14.1.7
     IBM Debug for z Systems 14.1.7
     IBM Z Open Development 1.0.2
    
    --- Features ---
    
    -Source Entry breakpoint support for the following clients:
      IBM Debug for z Systems v14.1.7
      IBM Developer for z Systems v14.1.7
      IBM Developer for z Systems Enterprise Edition v14.1.7
      IBM Z Open Development v1.0.2
    
    -The remote Playback function can now record and playback
     variable values.
    
    -In the z/OS Debugger Language Environment exit in the DB2
     environment, improve messages that reference DSNX9I4R. Show
     request codes, return code and reason code.
    
    --- End Features ---
    
    
    --- Service ---
    
    -Create missing sample member EQAWTBCH for the IMS Isolation
     batch interface.
    
    -When transactions are submitted for debug via the Debug
     Manager, and the user has not connected to RSE, connecting to
     RSE will only permit the first pending session to start.
     Users must disconnect and reconnect to RSE for each pending
     session.
     (PH00069 at 14.1)
    
    -Multiple unintended debugger starts with Hogan Batch and BMC
     DL/I active on the LPAR.
    
     When the debugger is used with SVC screening turned on and
     there are multiple ATTACHes about the same time and there is a
     DD for INSPPREF that uses SYSIN (DD *), there are error
     messages in the log that the open for INSPPREF fails.
    
     Messages $HASP708 and IEC141I:
       $HASP708 GODTTC6  INSPPREF OPEN FAILED
       RC=03 DATA SET ALREADY OPENED
       DSNAME=XXXXX.GODTTC6.JOB01827.D0000101.?
       IEC141I 013-C0,IGG0199G,GODTTC6,GO,INSPPREF  127
    
     (PI98698 at 14.1)
    
    -Code Coverage may not be produced for HLL programs compiled
    with option
     OPTIMIZE.
     (PH06524 at 14.1)
    
    -IBM Developer for System z V14.1 Code coverage with DBM or
     DIRECT fails with COMPLETION CODE=4088 REASON CODE=00000063.
     (PH07049 at 14.1)
    
    -IBM Developer for systems Z debugger V14 gets ABEND ABENDS0C1
     branching into address '00000000' from EQATIEXT with IMS
     isolation (ISO) feature.
    
     The ABEND happens in DT module EQATIEXT when calling the
     clients DFSMSCE0 for INIT. While the client's DFSMSCE0 does
     not have INIT entry point registered/defined, VINIT in the
     vector table is set to NULL, and EQATIEXT still branch to it,
     thus the ABEND.
     (PH08226 at 14.1)
    
    -IMS Transaction Isolation has numerous issues if more than one
     IMS sub-system is configured for IMS Isolation, and those
     sub-systems are at different versions of IMS.  The issues can
     include displaying an empty list on z/OS Debugger Utilities
     option 4.5 with the message "INVALID IMSID", or displaying a
     partial list containing the phrase "TXNNAME".
     (PH07908 at 14.1)
    
    -In z/OS Debugger Utilities, Program Preparation, COBOL V5/V6
     Compile, if you select I or S for these options:
       CICS    I Integrated CICS translator,
               S Separate CICS translator, N None
       DB2/SQL I Integrated SQL coprocessor,
               S Separate DB2 precompiler, N None
     the CICS and SQL compiler options are not being placed into
     the compiler options.
     (PH07495 at 14.1)
    
     FIXCAT KEYWORD:
     COB0501T/K COB0502T/K COB0601T/K COB0602T/K
    
    -In some cases, If SET DEF LISTING is used in a preferences
     file or a global preferences file, then the source view
     contains garbage.
     (PH08810 at 14.1)
    
    -The cross reference table data set is read in a non-IMS
     environment.
     (PH09204 at 13.1)
    
    -SOS in CICS debug session when debugging COBOL V5+ program
     when there are linkage section variables.
     (PH09580 at 14.1)
    
     FIXCAT KEYWORD:
     COB0501T/K COB0502T/K COB0601T/K COB0602T/K
    
    -Debugger does not start up because STEP name in EQAUOPTS does
     not match.  The step contains a call to a procedure and
     pattern matching is done on the STEP from the procedure.
     (PH09762 at 14.1)
    
    -ISPF RESTORE request error ISPP147 after IBM Developer for
     System z debugger ISPF Edit command EQAJCL T CMD and exiting
     ISPF Edit session.
     ISPP147:
     RESTORE request error
     A CONTROL RESTORE service request was issued for which there
     was no matching CONTROL SAVE.
     (PH10319 at 14.0)
    
    -Code Coverage incorrect coloring with SET DYNDEBUG OFF for PLI
     programs with compiled in HOOKs.
     (PH10178 at 14.1)
    
    -IMS ISO debugger Code Coverage is not working and no data is
     collected.
     (PH10341 at 14.1)
    
    -IBM z/OS Debugger V14 Monitor Expression of special registers,
     such as XML-TEXT displays invalid data in COBOL v5 and above
     programs.
     (PH10555 at 14.1)
    
     FIXCAT KEYWORD:
     COB0501T/K COB0502T/K COB0601T/K COB0602T/K
    
    -SUBPOOL 1 storage increases 432KB with every Enclave creation.
     (PH10992 at 14.1)
    
    -A batch remote debug session of a COBOL V5+ program ends with
     a ABENDS0C4 EQA0XCUS+'6170'x during termination
     (CUS_RMV_CODE)¦ when a breakpoint is set in a called program
     that is not called during the run.
     (PH10957 at 14.1)
    
     FIXCAT KEYWORD:
     COB0501T/K COB0502T/K COB0601T/K COB0602T/K
    
    -IBM z/OS Debugger V14.1 debugging a program caused a system
     hang. Wait state 084 reason 4.
     (PH10814 at 14.1)
    
    -In z/OS Debugger V14.1 running the Code Coverage with the Ent
     PL/I ON ENDFILE condition results in ON ENDFILE statements
     marked as not executed in red.
     (PH11662 at 14.1)
    
    -IBM Developer for z Systems V14.1 Code Coverage problem when
     there is more than one statement on a line with Ent PL/I.
     (PH11641 at 14.1)
    
    -EQAWICRT may not produce load modules and generates ABENDS0C4.
     HIGH LEVEL ASSEMBLER - INTERRUPT AND DIAGNOSTIC DUMP
     ** ASMA935U One or more required files not available
     ** ASMA416C Unable to open DECK file
     IMS Isolation EQANICRT: Force NODECK option for HLASM.
     (PH11360 at 14.1)
    
    -DBMDT option is missing in z/OS Debugger Utilities EQAPRIDN/E
     panels (IMS TM Debug->Manage RT Options).
     (PH11839 at 14.1)
    
    -Debugging a COBOL v4 program using z/OS Debugger v14.1.6, a
     ABENDS0C4 in EQA04CUS+'3814'x will occur when the COBOL
     program called is not the first CSECT in the load module. The
     following error message is also seen in the joblog:
     EQA9999E - Program Check at EQA04CUS+00003814
     (PH12611 at 14.1)
    
    --- End Service ---
    

Local fix

Problem summary

  • ****************************************************************
    * USERS AFFECTED:                                              *
    * z/OS Debugger 14.1 users who need the features or have the   *
    * problems described in the Problem Description.               *
    ****************************************************************
    * PROBLEM DESCRIPTION:                                         *
    * z/OS Debugger service for                                    *
    *  IBM Developer for                                           *
    *    z Systems Enterprise Edition                              *
    *      14.1.7                                                  *
    *  IBM Developer for                                           *
    *    z Systems 14.1.7                                          *
    *  IBM Debug for z Systems 14.1.7                              *
    *  IBM Z Open Development 1.0.2                                *
    *                                                              *
    * --- Features ---                                             *
    *                                                              *
    * -Source Entry breakpoint support for                         *
    *  the following clients:                                      *
    *                                                              *
    *   IBM Debug for z Systems v14.1.7                            *
    *   IBM Developer for                                          *
    *     z Systems v14.1.7                                        *
    *   IBM Developer for                                          *
    *     z Systems Enterprise Edition                             *
    *       v14.1.7                                                *
    *   IBM Z Open Development v1.0.2                              *
    *                                                              *
    * -The remote Playback function can now                        *
    *  record and playback variable values.                        *
    *                                                              *
    * -In the z/OS Debugger Language                               *
    *  Environment exit in the DB2                                 *
    *  environment, improve messages that                          *
    *  reference DSNX9I4R. Show request                            *
    *  codes, return code and reason code.                         *
    *                                                              *
    * --- End Features ---                                         *
    *                                                              *
    *                                                              *
    * --- Service ---                                              *
    *                                                              *
    * -Create missing sample member EQAWTBCH                       *
    *  for the IMS Isolation batch                                 *
    *  interface.                                                  *
    *                                                              *
    * -When transactions are submitted for                         *
    *  debug via the Debug Manager, and the                        *
    *  user has not connected to RSE,                              *
    *  connecting to RSE will only permit                          *
    *  the first pending session to start.                         *
    *  Users must disconnect and reconnect                         *
    *  to RSE for each pending session.                            *
    *  (PH00069 at 14.1)                                           *
    *                                                              *
    * -Multiple unintended debugger starts                         *
    *  with Hogan Batch and BMC DL/I active                        *
    *  on the LPAR.                                                *
    *                                                              *
    *  When the debugger is used with SVC                          *
    *  screening turned on and there are                           *
    *  multiple ATTACHes about the same time                       *
    *  and there is a DD for INSPPREF that                         *
    *  uses SYSIN (DD *), there are error                          *
    *  messages in the log that the open for                       *
    *  INSPPREF fails.                                             *
    *                                                              *
    *  Messages $HASP708 and IEC141I:                              *
    *    $HASP708 GODTTC6  INSPPREF OPEN                           *
    *    FAILED                                                    *
    *    RC=03 DATA SET ALREADY OPENED                             *
    *    DSNAME=                                                   *
    *     XXXXX.GODTTC6.JOB01827.D0000101.?                        *
    *    IEC141I 013-C0,IGG0199G,GODTTC6,                          *
    *     GO,INSPPREF  127                                         *
    *  (PI98698 at 14.1)                                           *
    *                                                              *
    * -Code Coverage may not be produced for                       *
    *  HLL programs compiled with option                           *
    *  OPTIMIZE.                                                   *
    *  (PH06524 at 14.1)                                           *
    *                                                              *
    * -IBM Developer for System z V14.1 Code                       *
    *  coverage with DBM or DIRECT fails                           *
    *  with COMPLETION CODE=4088 REASON                            *
    *  CODE=00000063.                                              *
    *  (PH07049 at 14.1)                                           *
    *                                                              *
    * -IBM Developer for systems Z debugger                        *
    *  V14 gets ABEND ABENDS0C1 branching                          *
    *  into address '00000000' from EQATIEXT                       *
    *  with IMS isolation (ISO) feature.                           *
    *                                                              *
    *  The ABEND happens in DT module                              *
    *  EQATIEXT when calling the clients                           *
    *  DFSMSCE0 for INIT. While the client's                       *
    *  DFSMSCE0 does not have INIT entry                           *
    *  point registered/defined, VINIT in                          *
    *  the vector table is set to NULL, and                        *
    *  EQATIEXT still branch to it, thus the                       *
    *  ABEND.                                                      *
    *                                                              *
    *  (PH08226 at 14.1)                                           *
    *                                                              *
    * -IMS Transaction Isolation has                               *
    *  numerous issues if more than one IMS                        *
    *  sub-system is configured for IMS                            *
    *  Isolation, and those sub-systems are                        *
    *  at different versions of IMS.  The                          *
    *  issues can include displaying an                            *
    *  empty list on z/OS Debugger Utilities                       *
    *  option 4.5 with the message "INVALID                        *
    *  IMSID", or displaying a partial list                        *
    *  containing the phrase "TXNNAME".                            *
    *  (PH07908 at 14.1)                                           *
    *                                                              *
    * -In z/OS Debugger Utilities, Program                         *
    *  Preparation, COBOL V5/V6 Compile,                           *
    *  r if you select I or S for these                            *
    *  options:                                                    *
    *                                                              *
    *    CICS    I Integrated CICS                                 *
    *      translator, S Separate CICS                             *
    *      translator, N None                                      *
    *    DB2/SQL I Integrated SQL                                  *
    *      coprocessor, S Separate DB2                             *
    *      precompiler, N None                                     *
    *  the CICS and SQL compiler options are                       *
    *  not being placed into the compiler                          *
    *  options.                                                    *
    *  (PH07495 at 14.1)                                           *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0501T/K COB0502T/K                                       *
    *  COB0601T/K COB0602T/K                                       *
    *                                                              *
    * -In some cases, If SET DEF LISTING is                        *
    *  used in a preferences file or a                             *
    *  global preferences file, then the                           *
    *  source view contains garbage.                               *
    *  (PH08810 at 14.1)                                           *
    *                                                              *
    * -The cross reference table data set is                       *
    *  read in a non-IMS environment.                              *
    *  (PH09204 at 13.1)                                           *
    *                                                              *
    * -SOS in CICS debug session when                              *
    *  debugging COBOL V5+ program when                            *
    *  there are linkage section variables.                        *
    *  (PH09580 at 14.1)                                           *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0501T/K COB0502T/K                                       *
    *  COB0601T/K COB0602T/K                                       *
    *                                                              *
    * -Debugger does not start up because                          *
    *  STEP name in EQAUOPTS does not match.                       *
    *  The step contains a call to a                               *
    *  procedure and pattern matching is                           *
    *  done on the STEP from the procedure.                        *
    *  (PH09762 at 14.1)                                           *
    *                                                              *
    * -ISPF RESTORE request error ISPP147                          *
    *  after IBM Developer for System z                            *
    *  debugger ISPF Edit command EQAJCL T                         *
    *  CMD and exiting ISPF Edit session.                          *
    *  ISPP147:                                                    *
    *  RESTORE request error                                       *
    *  A CONTROL RESTORE service request was                       *
    *  issued for which there was no                               *
    *  matching CONTROL SAVE.                                      *
    *  (PH10319 at 14.0)                                           *
    *                                                              *
    * -Code Coverage incorrect coloring with                       *
    *  SET DYNDEBUG OFF for PLI programs                           *
    *  with compiled in HOOKs.                                     *
    *  (PH10178 at 14.1)                                           *
    *                                                              *
    * -IMS ISO debugger Code Coverage is not                       *
    *  working and no data is collected.                           *
    *  (PH10341 at 14.1)                                           *
    *                                                              *
    * -IBM z/OS Debugger V14 Monitor                               *
    *  Expression of special registers, such                       *
    *  as XML-TEXT displays invalid data in                        *
    *  COBOL v5 and above programs.                                *
    *  (PH10555 at 14.1)                                           *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0501T/K COB0502T/K                                       *
    *  COB0601T/K COB0602T/K                                       *
    *                                                              *
    * -SUBPOOL 1 storage increases 432KB                           *
    *  with every Enclave creation.                                *
    *  (PH10992 at 14.1)                                           *
    *                                                              *
    * -A batch remote debug session of a                           *
    *  COBOL V5+ program ends with a                               *
    *  ABENDS0C4 EQA0XCUS+'6170'x during                           *
    *  termination (CUS_RMV_CODE)¦ when a                          *
    *  breakpoint is set in a called program                       *
    *  that is not called during the run.                          *
    *  (PH10957 at 14.1)                                           *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0501T/K COB0502T/K                                       *
    *  COB0601T/K COB0602T/K                                       *
    *                                                              *
    * -IBM z/OS Debugger V14.1 debugging a                         *
    *  program caused a system hang. Wait                          *
    *  state 084 reason 4.                                         *
    *  (PH10814 at 14.1)                                           *
    *                                                              *
    * -In z/OS Debugger V14.1 running the                          *
    *  Code Coverage with the Ent PL/I ON                          *
    *  ENDFILE condition results in ON                             *
    *  ENDFILE statements marked as not                            *
    *  executed in red.                                            *
    *  (PH11662 at 14.1)                                           *
    *                                                              *
    * -IBM Developer for z Systems V14.1                           *
    *  Code Coverage problem when there is                         *
    *  more than one statement on a line                           *
    *  with Ent PL/I.                                              *
    *  (PH11641 at 14.1)                                           *
    *                                                              *
    * -EQAWICRT may not produce load modules                       *
    * and generates ABENDS0C4.                                     *
    *                                                              *
    *  HIGH LEVEL ASSEMBLER - INTERRUPT                            *
    *   AND DIAGNOSTIC DUMP                                        *
    *  ** ASMA935U One or more required                            *
    *   files not available                                        *
    *  ** ASMA416C Unable to open DECK file                        *
    *  IMS Isolation EQANICRT: Force NODECK                        *
    *  option for HLASM.                                           *
    *  (PH11360 at 14.1)                                           *
    *                                                              *
    * -DBMDT option is missing in z/OS                             *
    *  Debugger Utilities EQAPRIDN/E panels                        *
    *  (IMS TM Debug->Manage RT Options).                          *
    *  (PH11839 at 14.1)                                           *
    *                                                              *
    * -Debugging a COBOL v4 program using                          *
    *  z/OS Debugger v14.1.6, a ABENDS0C4 in                       *
    *  EQA04CUS+'3814'x will occur when the                        *
    *  COBOL program called is not the first                       *
    *  CSECT in the load module. The                               *
    *  following error message is also seen                        *
    *  in the joblog:                                              *
    *  EQA9999E - Program Check at                                 *
    *  EQA04CUS+00003814                                           *
    *  (PH12611 at 14.1)                                           *
    *                                                              *
    * --- End Service ---                                          *
    ****************************************************************
    * RECOMMENDATION:                                              *
    * Installations that need these features or problem fixes      *
    * should install this service.                                 *
    ****************************************************************
    New features and miscellaneous service.
    

Problem conclusion

  • New features and service available.
    

Temporary fix

Comments

APAR Information

  • APAR number

    PH07787

  • Reported component name

    ZOS DEBUGGER

  • Reported component ID

    5724T0713

  • Reported release

    E10

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    YesHIPER

  • Special Attention

    NoSpecatt / Xsystem

  • Submitted date

    2019-01-27

  • Closed date

    2019-06-04

  • Last modified date

    2019-07-01

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

    UI63465

Modules/Macros

  • EQA10SID EQA17CUR EQA18QNS EQAS0GFU EQA10EMC EQA10PBK EQA00EHI
    EQAS0DBH EQAS0DBJ EQA08PFM EQAS0DBG EQA10HRS EQA00GLV EQARCCDA
    EQA00CCV EQASPDBI EQA00XML EQA00CCX EQA10RET EQA05CUS EQA10FND
    EQA00EHB EQAS0HKS EQAS0HKN EQA12CES EQA10DMM EQA10QFY EQA12CEI
    EQA12LX1 EQA12CED EQA10PDM EQAS0INT EQA10AFS EQA18DSP EQAS0MVS
    EQA50PRE EQAZDFLT EQA13DCL EQAAFSPS EQA12SCN EQA00SET EQAYBGID
    EQA00ABE EQAS0EH2 EQA00AEI EQA17SYC EQA17SYE EQA10TOG EQA10BKS
    EQA10BKT EQA14CAL EQAS0DEI EQA10BKP EQAS0SBM EQA10BKL EQASPBCL
    EQA10BKE EQAEV006 EQA00CIC EQA10BKC EQA10CMD EQA13SCN EQA10BKD
    EQA00EMG EQA00AEH EQARCI3E EQAS0EHI EQAS0EHB EQA10GTO EQA10NAM
    EQA00RES EQA00QCS EQA00CHG EQA12CEX EQA12LXB EQA00GSV EQAS0M99
    EQA30STO EQA50FC1 EQA0SDBI EQA50FC2 EQA00PDM EQA10AKA EQARCVND
    EQA00DMM EQA13CEX EQA13LXB EQA18CUR EQANCFRM EQAPPC6  EQANIPSB
    EQAS0SET EQAS0ABE EQA13LX1 EQA10BLK EQA14DCL EQA00DLD EQADCREP
    EQA10CND EQAYLIST EQA10DPA EQA10DTC EQA14CEX EQAXDEFP EQA00OEH
    EQARCPDC EQARCOBD EQA08CUS EQA10DSE EQA00ER0 EQA00ER1 EQA0YCUS
    EQA50INP EQA10ALO EQA10TRA EQAS0QCS EQA10BNK EQA50IMW EQA10LAM
    EQATIEDT EQA10EXE EQA0XCUS EQA10MGF EQA14SCN EQA0CIC2 EQA10MGA
    EQAS0EMG EQA10MG0 EQA10QNS EQA10MG1 EQA18SYE EQA18SYC EQA10LDD
    EQA14LX1 EQA10BPR EQANCREL EQA10BPP EQAXPP   EQA10BPQ EQA00CND
    EQA10ANL EQA10DTL EQA10LCM EQA14LXB EQA10MEM EQA10RST EQA10CVC
    EQA0SDLD EQASXCUS EQANICTL EQAS0DMM EQA10CUS EQA17DCL EQA00OHT
    EQA00OHV EQA0SXU1 EQA10STU EQANCABE EQA00OHC EQA10STM EQARCTRC
    EQA00OHH EQA0SQFY EQA00OHL EQA10EXX EQA00BND EQA0SCHG EQA10EXM
    EQA10EXN EQA00ALO EQAPMPDF EQA10LIN EQA10HAD EQA00EXE EQA0SCL2
    EQA0SCL1 EQA00QNS EQA02PFM EQA12DSP EQA10ASN EQANICRT EQA00LDU
    EQA00LDW EQA10QRY EQAD3XXT EQA00LDX EQA10QRZ EQA00LDY EQAYBCNM
    EQAYSMMN EQA0SEMC EQAD3UT1 EQARCL4  EQA00MEM EQA00EVH EQA10SVC
    EQA00DTL EQAS0CND EQAYFGID EQA00BPP EQA17CED EQA30INT EQA17LX1
    EQA00POP EQA17CEI EQA03PFM EQA10SYE EQACSTCP EQA10SYC EQA17CEX
    EQA17LXB EQA00CUS EQA12QNS EQAS0OHH EQARCEXP EQA00CTX EQAS0OHC
    EQAPP    EQASYCUS EQA00STO EQA00STU EQA10PRD EQA10PRC EQAHMPDF
    EQA0SUT1 EQAS0BND EQA10LIT EQA13QNS EQA10MON EQA10OSM EQAS0OHT
    EQA12CUR EQAS0OHV EQA17SCN EQA10PTP EQA18DCL EQA14CMS EQA0AIP2
    EQA0AIP1 EQA13DSP EQADCMGR EQAS0DTL EQA13MDV EQAS0EVH EQA50REQ
    EQA00SVC EQA14EVL EQA0SDTL EQA10OUT EQA10FCI EQAS0MGA EQA00PST
    EQA0SRPC EQA10LOG EQANMDBG EQA10CV  EQAS0QNS EQA0SRQ1 EQA01SVC
    EQA0SRQ2 EQA0SRQ4 EQA10FBP EQA14QNS EQAS0STO EQA00FA  EQA01SV2
    EQAFMDF6 EQA10LNK EQA10NRM EQA10VAT EQAJCL   EQA04PFM EQA10VAR
    EQA00LIS EQA00NMU EQA18SCN EQASAIP1 EQAS0POP EQA00GCC EQASAIP2
    EQA00LMS EQA00OSX EQA05PFM EQANIAFE EQAS0CUS EQA12SYE EQA12SYC
    EQA02CUS EQA0CINF EQA14MDV EQA18CED EQA18LX1 EQA14DSP EQA18CEI
    EQA50TMN EQA13CUR EQAXVARS EQA00A64 EQA0SRP1 EQA18CEX EQA18LXB
    EQA0SRP2 EQA0SRP3 EQA0SRP4 EQADCVSA EQADCCN0 EQA10LST EQA00HFS
    EQA00GDV EQA10LSE EQA30TKI EQA00GDD EQARCHEX EQAS3UT1 EQA00GDF
    EQA00GDG EQA30DMM EQASSUT1 EQA13SWC EQAS0NMU EQA10DAT EQANCHAB
    EQA10DES EQATIEXT EQAS0PST EQA0SEXP EQAXIIMS EQA0OIP1 EQA0PDBI
    EQA10FIN EQAXTIMS EQASG006 EQANISET EQA00GFU EQA00GFV EQA10DDT
    EQATIEX2 EQA10HLS EQA10INT EQA10MVS EQA14CUR EQA10INP EQA10MVO
    EQAS0A64 EQA0SRSM EQA13SYE EQA0SDU  EQA03CUS EQA13SYC EQA10TGA
    EQA00HKN EQA10M99 EQA17DSP EQA00LST EQAS0OSM EQA00HKS EQADCTSQ
    EQANBSWT EQA04CUS EQACMDRV EQA00DBG EQA00DBH EQA00DBI EQA00DBJ
    EQA10IPD EQA17QNS EQA10CCV EQAS0LMS EQA10XML EQA00DEI EQAZDSYS
    EQA12DCL EQA00EH2 EQAIIRMG EQA14PRF EQARCDBG EQA00SBM EQAS0GDV
    EQANXPOP EQANCLDE EQA14SYC EQA14SYE EQA00INT EQA10FLO EQA10SEV
    EQA10SET EQALMA   EQA50CTL EQAHMPSL EQA0SNTC EQA00CEM EQA04PST
    EQA00CEC EQA00CEE EQA0SMSU EQA00IPD EQA0S9LB EQA0CFUN EQA00REG
    EQAD3CSR EQA00XPR EQAMVS31 EQA00CEX EQA08BLK EQA0S0YE EQA0S0YC
    EQAS0GIV EQACIC32 EQAS0FIN EQA07STT EQAS0DEH EQA07EXP EQA0SINP
    EQA00PBK EQA0S4CN EQACIC41 EQA05PST EQAS7BLK EQAZPCM  EQA00GPA
    EQAS0CEM EQACSEXE EQAS0CEE EQA00TMM EQA00QFY EQA0SCBP EQA0SLSE
    EQA00ENV EQA0S4DS EQA07CUS EQA00BKP EQA00OEI EQA08STT EQA08EXP
    EQA00FRE EQA00NAM EQA00TMX EQA00GTO EQAS0REG EQA0SXR1 EQA0SIPD
    EQAS7CUS EQAPRIDE EQASXPMT EQAPRIDN EQAS7EXP EQA07PST EQAW3Z3
    EQAW3Z6  EQA00BLD EQA50XIO EQAS7STT EQA00BLK EQA1S4LB EQA08PST
    EQA0SRGU EQA00DTA EQA0S4LB EQA00DTC EQA00TSR EQA00LBL EQA00DSF
    EQA00OHB EQA00OHE EQA00OHI EQAS0GTO EQA00LAM EQAS0NAM EQACSCOM
    EQA00TRA EQA0SXUT EQAXPL31 EQA00SRT EQA00KBM EQA00LDR EQA0SXRI
    EQAS7PST EQALDR64 EQA00LDD EQA00TTL EQA00ANC EQA00LCM EQAS0BLK
    EQA0STKH EQA00ANL EQA50VIO EQA00RPB EQALDR31 EQA00CVC EQA0SBKP
    EQACSINT EQAS0DU  EQAEVDBG EQA00STR EQA00TVT EQA00STT EQA0S9YE
    EQA0S9YC EQA02BLK EQA0SUT2 EQA0SNAM EQA00RUN EQA00NML EQA00QRY
    EQA0SCLU EQAS0DSF EQA03BLK EQANCDBG EQA0AIPD EQA0SCMD EQA0AIP4
    EQA00RSV EQA0AIP3 EQAS0ANC EQA00CVT EQA0SBLD EQA0AIP6 EQA0AIP5
    EQA04CMS EQA0SLDD EQACTL   EQAS0KBM EQA00RWD EQA0SRQ3 EQAS0SRT
    EQAS0STR EQA0SEXA EQA0SEXE EQASAIP6 EQASAIP3 EQASAIP5 EQASAIP4
    EQA0STRE EQA0SCPU EQA0SUTI EQA00DU  EQAS0STT EQASAIPD EQA00LLF
    EQA00LLH EQA02STT EQA00LLT EQA0SBPP EQA02EXP EQA00CV  EQA04BLK
    EQA0SDTC EQA0SLCM EQA00LLC EQAS0RUN EQA03STT EQA03EXP EQA05BLK
    EQA00LNG EQA00VAR EQA00LNK EQA00GDP EQA10XIF EQA0SEXN EQACIC51
    EQA0OIP5 EQA0OIP6 EQA0OIP3 EQA0OIP4 EQA0OIP2 EQA0SEXU EQA02PST
    EQA0SEXX EQAS0RWD EQANCRTO EQAL6Z3  EQAL6Z6  EQA0S4YE EQA00NTC
    EQA0S4YC EQA00DCL EQA00GIV EQA00LSE EQAXRDT  EQA04STT EQAS0LNK
    EQAS0LNG EQA04API EQADXPMT EQA03ASN EQA04EXP EQA1S9LB EQA0OIPD
    EQA00LRC EQA00DEH EQAD3PXT EQA00FIN EQAMVS64 EQA0SPRD EQA05STT
    EQA05EXP EQA07BLK EQA02LOC EQAS0GDP EQADPITR EQA03PST EQAWTBCH
    

Fix information

  • Fixed component name

    ZOS DEBUGGER

  • Fixed component ID

    5724T0713

Applicable component levels

  • RE10 PSY UI63465

       UP19/06/13 P F906 ¢

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.



Document information

More support for: z/OS family

Software version: E10

Reference #: PH07787

Modified date: 01 July 2019