A fix is available
APAR status
Closed as new function.
Error description
SHUTDOWN BOOST E8561/K
Local fix
Problem summary
**************************************************************** * USERS AFFECTED: All SA z/OS V4R1 customers. * **************************************************************** * PROBLEM DESCRIPTION: SA should be enhanced to support the * * automatic activation of System * * Recovery Boost at system shutdown. * * * * E8561/K * **************************************************************** IBM Z System Recovery Boost is a new feature that is available with the IBM z15 (z15). It can temporarily leverage additional processor capacity during IPL and shutdown times to reduce the overall downtime due to recovery or maintenance activities. This new function requires z/OS V2.3 and OA57849 or z/OS V2.4. At IPL time, a system can automatically participate in the boost unless the BOOST system parameter in IEASYSxx is set to NONE. At shutdown time, the operator has to explicitly activate the boost by starting the new started procedure IEASDBS that is provided by z/OS. With OA58302, support is added to SA z/OS to automatically activate System Recovery Boost upon shutdown of a system. SA z/OS checks whether the operational prerequisites are met and if so starts the started procedure IEASDBS. Specifically, SA z/OS checks whether it runs on z/OS V2.3 or higher, whether boost is enabled in IEASYSxx and that the system is not already operating in boost mode. IEASDBS is started only when all conditions are met. SA z/OS does not check whether it runs on a z15. If System Recovery Boost should not be activated automatically upon system shutdown, even if enabled by the operating system, the administrator can pass the new INGREQ parameter BOOST=NO with the INGREQ ALL request. To permanently disable System Recovery Boost during shutdown of a system, the administrator can set the global variable INGREQ_BOOST to NO. When a system is shut down via GDPS, SA z/OS also automatically activates System Recovery Boost when the operational prerequisites are met. To avoid automatic activation of System Recovery Boost, the administrator can set the advanced automation option AOF_AAO_SHUTDOWN_BOOST to NO. IEASDBS activates System Recovery Boost only once. If it has been started manually before an operator requests a shutdown via SA z/OS, SA z/OS will detect it and not start the procedure again. If the procedure is started manually after an operator requests shutdown via z/OS and z/OS has already started it automatically, messages on the system console indicate that an error occurred but no further action is required.
Problem conclusion
Temporary fix
Comments
Changes have been made to implement the automatic activation of System Recovery Boost at system shutdown. For more information and updates to the documentation, refer to the links below: INGREQ : new BOOST parameter and description and Usage https://www.ibm.com/support/knowledgecenter/SSWRCJ_4.1.0/com.ibm .safos.doc_4.1/OperatorGuide/INGREQ.html New INGREQ_BOOST parameter https://www.ibm.com/support/knowledgecenter/SSWRCJ_4.1.0/com.ibm .safos.doc_4.1/CustandProg/Parameter_Defaults_for_Commands.html# Parameter_Defaults_for_Commands__boost New AOF_AAO_SHUTDOWN_BOOST variable: https://www.ibm.com/support/knowledgecenter/SSWRCJ_4.1.0/com.ibm .safos.doc_4.1/CustandProg/Read_Write_Variables.html#Read_Write_ Variables__shutboost
APAR Information
APAR number
OA58302
Reported component name
SYSTEM AUTO Z/O
Reported component ID
5698SA300
Reported release
410
Status
CLOSED UR1
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2019-09-09
Closed date
2019-09-25
Last modified date
2019-10-01
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UJ00933 UJ00934
Modules/Macros
AOFAUTB AOFEXC01 AOFEXC15 HSAPRSYS ING#REQ INGCMD INGH$RU INGKYRU2 INGRTERM INGRVRU4 INGRVRU5 INGRYRU0
SC34272001 | SC34271501 |
Fix information
Fixed component name
SYSTEM AUTO Z/O
Fixed component ID
5698SA300
Applicable component levels
R410 PSY UJ00933
UP19/10/01 P F909
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SSWRCJ","label":"IBM Tivoli System Automation for z\/OS"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"410","Edition":"","Line of Business":{"code":"LOB35","label":"Mainframe SW"}}]
Document Information
Modified date:
01 October 2019