IT18516: MODIFYING SNMP SETTINGS DURING SNMP CLIENT TRAFFIC MIGHT RESTART THE FIRMWARE
Fixes are available
Fix packs for DataPower Service Gateway version 7.0
Fix packs for DataPower B2B Appliance version 7.0
Fix packs for DataPower Integration Appliance version 7.0
Fix packs for DataPower Gateway version 7.1
Fix packs for DataPower Gateway version 7.2
Fix packs for DataPower Gateway version 7.5
Fix packs for DataPower Gateway version 7.5.1
Fix packs for DataPower Gateway version 7.5.2
Closed as program error.
When using the CLI or WebGUI to modify the configuration of SNMP Settings, if there is client traffic during the same period of time that you apply changes, the device might unexpectedly restart as a result.
Disable SNMP clients from polling when modifying SNMP Settings.
Affected are all users monitoring the appliance with SNMP. An unexpected restart might occur when the SNMP configuration is being changed while the appliance is also being polled.
Fix is available in 220.127.116.11, 18.104.22.168, 22.214.171.124, 126.96.36.199, 188.8.131.52 and 184.108.40.206 For a list of the latest fix packs available, please see: http://www-01.ibm.com/support/docview.wss?uid=swg21237631
Reported component name
Reported component ID
NoSpecatt / Xsystem
Last modified date
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
Fixed component name
Fixed component ID
Applicable component levels