IBM Support

SI70366 - BRM-MAINT INCORROUT Fixes - July 2019

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

BRM-MAINT INCORROUT Fixes - July 2019


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
NONE



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.


APAR Error Description / Circumvention

-------------------------------------------------
It is important to keep all systems in a BRMS network at the
same level of BRMS PTFs.
Fixes included in this PTF may reference enhancements. More
information on these enhancements can be found on the BRMS web
page:
www.ibm.com/developerworks/ibmi/brms
Additionally also review the media web page:
www.ibm.com/developerworks/ibmi/media

Fixes in this PTF:
1. In 7.2 and later, the clear missed objects policy setting is
not being resolved correctly when the control group Missed
object policy is set to *BKUPCY.
2. In 7.2 and later, the INZBRM OPTION(*VFYNET) or
OPTION(*VFYENT) incorrectly reports MSGBRM1177 if more than 50
systems are in the BRMS network.
3. In 7.2 and later, BRMS has enhanced the volume selection for
concurrent backups tape reservations.
4. In 7.2 and later, Domino restores using WRKMEDIBRM with the
VOL() parameter or WRKMEDBRM options 13 to Display contents
shows the wrong Domino package information.
5. In 7.2 and later, remote restores may not restore all
libraries and WRKSPLFBRM remote restores may not restore
expected spooled files.
6. In 7.2 and later, restores of a list of libraries backed up
using serial and parallel saves may fail with MSGCPD0071,
MSGCPF0006, and MSGCPF61FF.
7. In 7.2 and later, *ALLUSR backups using *INCR *INCR may fail
with MSGCPF0550.
8. In 7.2 and later, BRMS has enhanced backup omit processing to
combine BRMS GUI web omits and green screen *BKUPCY omits for
libraries.
9. In 7.2 and later, BRMS has enhanced the backup control group
exit program.
10. In 7.2 and later, changing the volume expiration date to an
earlier date and changing the owning system for an expired
volume in the same operation may cause volume owning system
inconsistencies in a BRMS network.
11. In 7.2 and later, an *ALLUSR control group entry using Save
While Active *NO and a Save active wait time value of *NOCMTBDY
for the control group attribute Pending record changes
incorrectly omits Q* and #* libraries.
12. In 7.2 and later, control group backups containing a folder
or spooled file list using a control group exit program may fail
with MSGMCH1210.
13. In 7.2 and later, backups to sequence one may not be
reflected in BRMS history if a cloud remote restore preceded the
backup in the same job.
14.   In 7.2 and later, QBRMSYNC fails with MSGMCH1202 when
using User-defined SYSBAS and IASP Timestamps.
15.   In 7.2 and later, non-BRMS backups to media not enrolled
in BRMS fail with MSGBRM3D1D.

CORRECTION FOR APAR 'SE71580' :
-------------------------------
Load and apply this PTF.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


----------------------------------------------------------------
------------------------------------

Enable the BRMS plug-in for System i Navigator Windows/OS
client.
1) Close the System i Navigator application.
2) Open a Windows Command Prompt screen.
3) Enter the following command:
cwbinplg /REMOVE=IBM.BRMSPlugin
4) On the client/PC, start the iSeries Navigator.
5) Use the System i Navigator "Install Options->Install
Plug-in"
action. This action is available from the main System i
Navigator "File" menu and the "My Connections" folder
context/pop-up menu.  When prompted for the iSeries system
to install from, select the iSeries that has the new BRMS
PTF installed.

CIRCUMVENTION FOR APAR 'SE71580' :
----------------------------------
None.


Activation Instructions

None.




Special Instructions


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS jobs must be ended before applying this ptf.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

All BRMS activity must be stopped while this ptf is

being applied and users must signoff and on again

before using BRMS after the ptf is applied.


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS jobs must be ended before applying this ptf.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

All BRMS activity must be stopped while this ptf is

being applied and users must signoff and on again

before using BRMS after the ptf is applied.


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


Please end all BRMS jobs before applying this ptf.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

All BRMS activity must be stopped while this ptf is

being applied and users must signoff and on again

before using BRMS after the ptf is applied.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI69389      BRM-MAINT-INCORROUT Fixes - June 2019
   SI68855      BRM-MAINT-INCORROUT Fixes - March 2019
   SI68845      BRM-MAINT-INCORROUT Fixes - December 2019
   SI68567      BRM-MAINT-INCORROUT Fixes - December 2018
   SI68072      BRM-MAINT-INCORROUT Fixes - September 2018
   SI67312      BRM-MAINT-INCORROUT Fixes - June 2018
   SI66899      BRM-MAINT-INCORROUT Fixes - March 2018
   SI66285      BRM-MAINT-INCORROUT Fixes-Dec 2017
   SI65675      BRM-MAINT-INCORROUT Fixes-Sept 2017
   SI64248      BRM-MAINT-INCORROUT Fixes-June 2017
   SI64275      BRM-BACKUP-MSGBRM4106 - REQUESTED FUNCTION NOT CORRECT
   SI63721      BRM-MAINT-INCORROUT Fixes-Mar 2017
   SI63591      BRM-MAINT-MSGBRM6714 STRMNTBRM LOOPS WITH CORRUPT BRM6714 ME
   SI63085      BRM-MAINT-INCORROUT Fixes-Dec 2016
   SI61152      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI61152      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI59998      BRM-MAINT-INCORROUT Fixes-June 2016
   SI60600      BRM-RECOVERY-THREADS-MSGCPF3878C BRMS RESTORE FROM PARALLEL
   SI58957      BRM-MAINT-INCORROUT Fixes-March 2016
   SI57831      BRM-MAINT-INCORROUT Fixes-Dec 2015
   SI57980      BRM PROBLEM REMOVING SYSTEM FROM BRMS NETWORK
   SI57980      BRM-MEDIA-LOOP WHEN APPENDING SAVES TO DUPLICATE MEDIA USING
   SI57214      BRM-MAINT-INCORROUT Fixes-Sept 2015
   SI56278      BRM-MAINT-INCORROUT  Fixes
   SI55731      BRM-MAINT-INCORROUT  Fixes
   SI54787      BRM-MAINT-INCORROUT  Fixes
   SI53306      BRM-MAINT-INCORROUT  Fixes
   SI52668      BRM-MAINT-INCORROUT  Fixes
   SI51641      BRM-MAINT-INCORROUT  Fixes
   SI50936      BRM-MAINT-INCORROUT  Fixes

Summary Information

System..............................  i
Models..............................  
Release.............................  V7R2M0
Licensed Program....................  5770BR1
APAR Fixed..........................  View details for APAR SE71580
Superseded by:......................  View fix details for PTF SI84637
Recompile...........................  N
Library.............................  QBRM
MRI Feature ........................  NONE
Cum Level...........................  C9297720


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.2.0","Product":{"code":"SWG60","label":"IBM i"},"Component":"5770BR1","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}}]

Document Information

Modified date:
06 October 2023