Content

Interim Fix: 5.0.0.0-IBM-IMA-IFIT28839
Date: April 25, 2019
Build: 20190422-2029
IBM MessageSight 5.0.0.0 Cumulative interim fix

(Note: all MessageSight 5.x ifixes and fixpacks are cumulative.  In addition, because of the nature of the fix packaging for 5.0, any published fix can be used for the base install of MessageSight.  It is recommend to install the latest IFIX or FP as the initial install of the product.)

Fix Instructions:

Before you install:

We strongly recommend performing a backup before upgrading the product software:

Backup and restore instructions

1. Preparing to install the fix:

Prepare the IBM IoT MessageSight .tz files for installation.  The preparation steps for installing MessageSight as an update or for the first time are the same.  For more information, see Preparing the IBM IoT MessageSight .tz packages for installation .

These instructions will focus on providing instructions for updating MessageSight.  See the following instructions for installing MessageSight for the first time:

Installing IBM IoT MessageSight

2. Installing the fix:

A. RPM: In an environment where MessageSight is installed with rpm:

I. Updating the MessageSight Server package if Server is installed:

      cd imaserver

      sudo  yum -y --nogpgcheck update IBMIoTMessageSightServer*.rpm

      systemctl start IBMIoTMessageSightServer

II. Updating the MessageSight WebUI package if the WebUI is installed:

      cd imawebui

      sudo yum -y --nogpgcheck update IBMIoTMessageSightWebUI*.rpm

      systemctl start IBMIoTMessageSightWebUI

II. Updating the MessageSight Bridge package if the Bridge is installed:

      cd imabridge

      sudo  yum -y --nogpgcheck update IBMIoTMessageSightBridge*.rpm

      systemctl start IBMIoTMessageSightBridge

NOTE: these packages can also be installed using: rpm -Uvh IBMIoTMessageSight*.rpm. However, you must never update using:

yum install IBMIoTMessageSightServer*.rpm

or uninstall and reinstall with rpm or yum (if you wish to preserve your existing data), since this will remove all of your data and config under /var/messagesight.

B. Docker: Installing the fix in an environment where MessageSight is running in docker:

I. Build the IBM IoT MessageSight Docker image.

Build the IBM IoT MessageSight server image by issuing the following command:

cd imaserver

mv *.rpm imaserver.rpm

docker build --force-rm=true -t <server_image_name>:<fix_version>.<build> .

Eg:

docker build --force-rm=true -t imaserver:5.0.0.0.20190422-2029 .

II. Build the IBM IoT MessageSight Web UI image by issuing the following command:

cd imawebui

mv *.rpm imawebui.rpm

docker build --force-rm=true -t <webui_image_name>:<fix_version>.<build> .

Eg:

docker build --force-rm=true -t imawebui:5.0.0.0.20190422-2029 .

III. Build the IBM IoT MessageSight Bridge image by issuing the following command:

cd imabridge

mv *.rpm imabridge.rpm

docker build --force-rm=true -t <bridge_image_name>:<fix_version>.<build> .

Eg:

docker build --force-rm=true -t imabridge:5.0.0.0.20190422-2029 .

III.  Stop the existing containers.

Stop the server container by issuing the following command:

docker stop <server_container_name>

where <server_container_name> is the name of the container in which the IBM IoT MessageSight server is running. For example,

docker stop imaserver

Stop the Web UI container by issuing the following command:

docker stop <webui_container_name>

where <webui_container_name> is the name of the container in which the IBM IoT MessageSight Web UI is running. For example,

docker stop imawebui

Stop the Bridge container by issuing the following command:

docker stop <bridge_container_name>

where <bridge_container_name> is the name of the container in which the IBM IoT MessageSight Bridge is running. For example,

docker stop imabridge

IV. Remove the containers.

Remove the server container by issuing the following command:

docker rm <server_container_name>

where <server_container_name> is the name of the container in which the IBM IoT MessageSight server was running. For example,

docker rm imaserver

Remove the Web UI container by issuing the following command:

docker rm <webui_container_name>

where <webui_container_name> is the name of the container in which the IBM IoT MessageSight Web UI was running. For example,

docker rm imawebui

Remove the Bridge container by issuing the following command:

docker rm <bridge_container_name>

where <bridge_container_name> is the name of the container in which the IBM IoT MessageSight Bridge was running. For example,

docker rm imabridge

V.  Remove the old MessageSight images (optional)

This step is only required if you are not tagging MessageSight docker images with version specific tags.  For example, if you build a MessageSight docker image like this:

docker build --force-rm=true -t imaserver:5.0 .

for every version of MessageSight, then you need to remove the previous image by issuing the following command(s), before building the update image:

docker rmi -f $(docker ps | grep imaserver | awk '{print $3}')

Remove the IBM IoT MessageSight Web UI image by issuing the following command:

docker rmi -f $(docker ps | grep imawebui | awk '{print $3}')

Remove the IBM IoT MessageSight Bridge image by issuing the following command:

docker rmi -f $(docker ps | grep imabridge | awk '{print $3}')

If, however, you tag each MessageSight image with a build specific version, eg:

docker build --force-rm=true -t imaserver:<fix_version>.<build> .

then this step is not required.

VI.  Start the new containers.

Use the same Docker run command that you had used for previous incarnations of the MessageSight containers.

Here's the general syntax for how to start the IBM IoT MessageSight server container:

docker run --cap-add SYS_ADMIN --net=host -P -it --name=<server_container_name> -env-file=IBMIoTMessageSightServer-docker.env -m <memory> -v <local_data_directory>:/var/messagesight -v <local_temp_directory>:/var/tmp -d <server_image_name>:<fix_version>.<build>

A more concrete example:

docker run --cap-add SYS_ADMIN --net=host -P -it --name=imaserver -env-file=IBMIoTMessageSightServer-docker.env -m 64G -v /data/messagesight:/var/messagesight -v /mnt/tmp:/var/tmp -d imaserver:5.0.0.0.20190422-2029

To start the IBM IoT MessageSight Web UI container:

docker run --cap-add SYS_ADMIN --net=host -P -it --name=<webui_container_name> --env-file=IBMIoTMessageSightServer-docker.env -m <memory> -v <local_data_directory>:/var/messagesight -v <local_temp_directory>:/var/tmp -d <webui_image_name>:<fix_version>.<build>

A more concrete example:

docker run --cap-add SYS_ADMIN --net=host -P -it --name=imawebui --env-file=IBMIoTMessageSightServer-docker.env -m 2G -v /data/messagesight:/var/messagesight -v /mnt/tmp:/var/tmp -d imawebui:5.0.0.0.20190422-2029

To start the IBM IoT MessageSight Bridge container:

docker run --cap-add SYS_ADMIN --net=host -P -it --name=<bridge_container_name> --env-file=IBMIoTMessageSightBridge-docker.env -m <memory> -v <local_data_directory>:/var/messagesight -v <local_temp_directory>:/var/tmp -d <bridge_image_name>:<fix_version>.<build>

A more concrete example:

docker run --net=host -P -it --name=imabridge --env-file=IBMIoTMessageSightBridge-docker.env -m 2G -v /data/messagesight:/var/messagesight -v /mnt/tmp:/var/tmp -d imabridge:5.0.0.0.20190422-2029

3. Verifying the installation:

If this is your initial install of the product see Configuring the licensed usage for IBM IoT MessageSight and accepting the license by using REST Administration APIs for accepting the product license .

If this is an update, then you can verify the status of the server see Viewing the status of an IBM IoT MessageSight server and services by using REST Administration APIs .