Preventive Service Planning
Abstract
Configuration information for INFINIDAT InfiniGuard B-Series Virtual Tape Libraries
Content
INFINIDAT InifiniGuard B4212N
INFINIDAT InifiniGuard B4260N
INFINIDAT InfiniGuard B4260
Starting Drive Address
|
Starting Storage Slot Address
|
Changer Address
|
Starting Entry/Exit Slot Address
|
256
|
4096
|
1
|
16
|
Notes:
1. INFINIDAT InfiniGuard B-Series are enterprise disk backup solution. These virtual tape libraries (VTL) can emulate various Quantum media changers and drives.
2. Barcodes are supported.
3. Device identifications and firmware levels used during validation
InfiniGuard B-Series B4260N and B4212N with InfiniGuard version 3.0 (Validated with TSM 8.1.5)
Library ID : QUANTUM DXi9000 --- Firmware : 100A
rive ID : IBM ULTRIUM-TD5 --- Firmware : A5M0
Drive ID : HP ULTRIUM 5-SCSI --- Firmware : I30Z
InfiniGuard B-Series B4260 with InfiniGuard version 2.0 (Validated with TSM 7.1.0)
Library ID : QUANTUM DXi6900 --- Firmware : 100A
Drive ID : IBM ULTRIUM-TD5 --- Firmware : A5M0
Drive ID : HP ULTRIUM 5-SCSI --- Firmware : I30Z
4. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is supported.
5. Application Managed Encryption (AME) is not supported.
6. Drive Encryption, Logical Block Protection , and WORM are not supported.
7. INFINIDAT InfiniGuard B-Series can emulate up to 512 drives. However, IBM Spectrum Protect Server may support less than 512 drives. See Technote 1364225 for information about the maximum number of devices that the IBM Spectrum Protect device driver can support on each platform.
8. If the emulated tap drives are IBM Ultrium tape drives, the IBM device driver is required. The IBM device drivers are available at IBM Fix Central. Choose the following options from the drop-down menus.
- Product Group -> System Storage
- System Storage -> Tape systems
- Tape systems -> Tape drivers and software
- Tape drivers and software -> Tape device drivers
- Platform -> Select the platform for the device driver
Related technotes
- Technote 7012510 - RELABELSCRATCH parameter supported for DEFINE and UPDATE library commands (for Virtual Tape Libraries)
- Technote 1425849 - General Virtual Tape Library Considerations For Tivoli Storage Manager Servers
- Technote 1470193 - IBM Spectrum Protect server support for NFS
Library and drive may require different minimum IBM Spectrum Protect levels. Therefore, ensure that both library and drive hardware are supported. See "Supported Devices for AIX, HP-UX, Solaris and Windows" or "Supported Devices for Linux" for more support information including minimum supported version levels and supported platforms.
Was this topic helpful?
Document Information
Modified date:
25 April 2019
UID
ibm10743657