IBM Support

MS81: IBM MQ Internet Pass-Thru



IBM MQ Internet Pass-Thru is an IBM MQ base product extension that can be used to implement messaging solutions between remote sites across the internet.

Download Description

IBM MQ Internet Pass-Thru (MQIPT) makes the passage of IBM MQ channel protocols into and out of a firewall simpler and more manageable, by tunnelling the protocols inside HTTP or by acting as a proxy.

MQIPT has an Administration graphical user interface (GUI) for managing one or more MQIPT servers.

MQIPT runs on the platforms indicated in the hardware and software requirements below. It uses the JRE supplied.

Possible Uses
Used as a proxy, MQIPT is placed in the De-Militarized Zone (DMZ) on an Internet firewall and relays IBM MQ protocol flows from an IBM MQ client or queue manager on the external Internet, to a destination queue manager inside the firewall. This enables inbound IBM MQ communication through the firewall from an address that is in the secure DMZ. This is likely to be more acceptable to firewall administrators than an arbitrary external Internet address.

Placing a pair of MQIPT servers in the path of an IBM MQ channel connection enables HTTP wrappers to be added to the protocol flow. This enables the IBM MQ connection to pass inbound through an HTTP application firewall, or outbound through an HTTP proxy. A pair of MQIPT servers can also be used to encrypt all data flows, using SSL or TLS.

MQIPT can also act as a concentrator of IBM MQ connections, which simplifies firewall configuration when multiple IBM MQ clients or queue managers require access through an Internet firewall.

MQIPT can be configured to act as a SOCKS client or SOCKS server, for making outbound connections. The Administration GUI can also use a SOCKS proxy to connect to an MQIPT server.

MQIPT can be used with the IBM Network Dispatcher, to provide enhanced availability and load balancing across many servers.

These modes of operation of MQIPT give greater flexibility to the connection of IBM MQ channels through a variety of firewall and network topologies and facilitate many application models - particularly in the B2B environment.

MQIPT does not require any changes to IBM MQ application code, and only a minor modification to the hostname/port setting in MQ channel definitions.

Skill Level Required
This SupportPac should be installed by an IBM MQ system administrator or network administrator. Configuration and implementation of this SupportPac requires a basic understanding of TCP/IP networking and a knowledge of Internet firewall administration.

New in this Release
The JRE level has been updated to for Windows, AIX and Linux only.  Users  should download and install the JRE update package to update the JRE to

Security Notice

Anon and NULL algorithms are no longer enabled by default in the latest JRE update. This affects the following CipherSuites in MQIPT:

3DES ciphers are no longer considered secure and are disabled by default from MQIPT version

To improve security, DES40_CBC ciphers are no longer enabled by default in the JRE update to, and any later JRE updates. This affects the following CipherSuites in MQIPT:

If you are aware of the potential hazards but still have a need to use one of these CipherSuites, you can add support for it by removing the corresponding algorithm from the list of disabled algorithms (jdk.tls.disabledAlgorithms) in the file, found in mqipt_path/java/jre/lib/security/, where mqipt_path is the location where MQIPT is installed.

Owner: Gwydion Tudur, IBM MQ Development, IBM United Kingdom Laboratories
Category: 3
Released: 11Jul00
Last Updated: 29Apr19
Current SupportPac Version:
Latest MQIPT fix list can be found here.
»Please note that the version number shown in the right-hand pane is the version of the MQ or WBI product that this SupportPac applies to. The date is the last web page refresh.
To view the complete portfolio of WebSphere MQ SupportPacs please visit the WebSphere MQ SupportPacs homepage.


Please see full hardware and software prerequisites in the ms81.txt file below.

System Requirements US English 2468

Installation Instructions

Note that the installation method has changed from the previous release. MQIPT 2.0 and earlier used a platform-specific installation method, such as AIX installp and Linux RPM. However, MQIPT 2.1 has no installer: simply unpack the supplied file archive in your chosen installation directory. The following guidance is provided to assist with installation of MQIPT 2.1.

To install the SupportPac on a Windows platform:
• Download file to a temporary directory (for example C:\temp).
• Create a new directory where you want MQIPT to be installed (for example C:\MQIPT).
• Move the downloaded to the new MQIPT installation directory.
• Uncompress using InfoZip Unzip. If you use other unzip programs, ensure you specify the option to re-create stored directories.
• It is recommended to make the MQIPT installation directory read-only by revoking write permissions from all users.
• To create MQIPT icons on the Start menu, run the following command from an Administrator command prompt:
C:\MQIPT\bin\mqiptIcons -install installation_name

To install the SupportPac on a UNIX or Linux platform, you must log on as the root user. Then perform the following steps:
• Download the tar file to a temporary directory (for example /tmp).
• Create a new directory where you want MQIPT to be installed (for example /opt/mqipt).
• Move the downloaded tar file to the new MQIPT installation directory, for example:
mv /tmp/ms81_x86_linux_2.tar /opt/mqipt
• Unpack the tar file, for example:
cd /opt/mqipt
tar xf ms81_x86_linux_2.tar
• To increase security, set the file permissions for your installed files so that they are read-only. For example:
chmod -R /opt/mqipt/* a-w
Note: failure to run the tar command as root is likely to result in "permission denied" errors.

For more information about installation and migration from the previous release, refer to the readme and PDF documentation.

The link below contain SupportPac documentation in PDF format. Refer to for an Adobe Acrobat PDF viewer.

Download the MQIPT package specific to your platform.

JRE update installation instructions:
Periodically IBM releases an updated JRE for use with MQIPT in order to provide the latest Java security fixes. Updated JREs for MQIPT can be downloaded via the Download package link, in the Security Update JRE for MS81 section. To install a new JRE for MQIPT, follow the instructions here. The MQIPT version number is not affected by installing a new MQIPT JRE. To determine which MQIPT JRE is currently installed, use the mqiptVersion -v command.

ms81.pdf US English 1904383

Download Package

A JRE update package is also available from the download link below.

The JRE level has been updated to for Windows, AIX and Linux, and on other platforms. Users should download and install the JRE update package to update the JRE to the latest level available.

Note that the installation method has changed from the previous release. Refer to the Installation Instructions section for more information. Please note that you should run as the root user in order to install MQIPT on UNIX and Linux platforms.

Download RELEASE DATE LANGUAGE SIZE(Bytes) Download Options
ms81 (All platforms) 05 Jun 2018 US English 9200000 HTTP
JREs 29 Apr 2019 US English 111 HTTPS

Technical Support

Category 3 WebSphere MQ (MQSeries) SupportPacs are supplied under the standard terms and conditions provided by the International Program License Agreement (IPLA) and thus carry program defect service.

Please read the licence files that accompany the SupportPac to ensure you understand the conditions under which the SupportPac is provided.

If you encounter what you believe to be a defect with the SupportPac you may request Program Services by reporting the problem via the same defect reporting channel you employ for the WebSphere MQ or MQSeries server product(s) on which you are using the SupportPac.

This SupportPac has service support for as long as the WebSphere MQ V7.1, V7.5 or IBM MQ V8.0 product with which it runs remains in service. Refer to for the relevant service information.

Document information

More support for: WebSphere MQ

Component: --

Software version: 7.1, 7.5, 8.0, 9.0, 9.1

Operating system(s): AIX, HP-UX, Linux, Solaris, Windows

Reference #: 4006386

Modified date: 19 June 2019