IBM System Storage N3600 Model A10 and Model A20 offer Fibre Channel, iSCSI, and NAS storage
IBM United States Hardware Announcement 107-495August 28, 2007
 ENUS107495.PDF (131KB)
|
At a glance
 |
| At a glance |
 |
The IBM System Storage N3600 is designed to provide:
- High data availability and system-level redundancy
- Support of concurrent block I/O and file serving over Ethernet and FC SAN infrastructures
- High throughput and fast response times
- Up to 20 Serial Attached SCSI (SAS) HDD
- Fibre Channel (FC) and Serial Advanced Technology Attachment (SATA) disk drive support
- Support for both block I/O via FC and Internet Small Computer System Interface (iSCSI), and file I/O via CIFS, NFS, HTTP, and FTP protocols
- Maximum of 104 disk drives supported, for both Model A10 and Model A20
- Two GB (per controller) of random access memory
- One backend FC loop
- Enhanced reliability with active/active failover support on the Model 20
- Upgrade capability from Model A10 to Model A20
For ordering, contact:
Your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at
800-IBM-CALL
(Reference: YE001).
Back to top
|
|
| Overview |
|
The IBM System Storage™ N3600 storage controller includes the Model A10, a single-node base unit, and the Model A20, an active/active dual-node base unit. Both models are designed to provide fast data access, simultaneous multiprotocol support, expandability, upgradeability, and low maintenance requirements.
The two models of the N3600 are designed to provide:
- High data availability and system-level redundancy to help address the needs of business-critical and mission-critical applications
- Single, integrated architecture to support concurrent block I/O and file serving over Ethernet and Fibre Channel SAN infrastructures
- High throughput and fast response times for database, e-mail, and technical applications
- 12 to 20 Serial Attached SCSI (SAS) disk drives, either 144 GB or 300 GB, disk drives ordered separately as features
- Support for both block I/O via Fibre Channel (FC) and Internet Small Computer System Interface (iSCSI), and file I/O via CIFS, NFS, HTTP, and FTP protocols
- 104 as the maximum number of disk drives supported, regardless of physical disk capacity
- Attachment of either FC or Serial Advanced Technology Attachment (SATA) disk expansion units
- Two GB of random access memory per controller
- One backend FC loop
- Upgrade capability from Model A10 to Model A20
The N3600 storage controller supports both the EXN1000 SATA storage expansion unit, and the EXN2000 and EXN4000 FC storage expansion units. The maximum number of storage expansion units that may be attached to either the Model A10 or A20 is six.
The EXN1000 storage expansion unit can be configured with 5 to 14 disk drives of 250 GB or 750 GB physical capacity. The EXN4000 storage expansion unit can be configured with 5 to 14 disk drives of 144 GB or 300 GB physical storage capacity. EXN1000 SATA storage expansion units, and EXN2000 and EXN4000 FC storage expansion units, may not coreside on the same N3600.
These N series models are designed to provide fast data access, simultaneous multiprotocol support,
expandability, upgradeability, and low maintenance requirements. Additional functions, such as
snapshot, compliance, mirroring, and business continuance capability, are available through optional
licensed functions.
Back to top
|
|
| Key prerequisites |
|
The IBM System Storage N3600 requires FC, NFS, CIFS, or iSCSI protocol function.
Back to top
|
|
| Planned availability dates |
|
- September 7, 2007: Except model and feature conversions
- November 9, 2007: Model and feature conversions (A10 to A20)
Back to top
|
|
| Description |
|
The IBM System Storage N3600 storage controllers are designed to interoperate with products capable of data transmission in the industry-standard iSCSI, CIFS, FCP and NFS protocols. These include the IBM System p™, IBM System i™ (NFS only), IBM System x™, and IBM System z™ (NFS only) servers. The N3600 storage controllers consist of the Model A10 and Model A20 and associated software.
The Model A10 is designed to provide a single-node storage controller with iSCSI support, and NFS, CIFS, and FCP support via optional features. The N3600 Model A10 is a 4U storage controller that must be mounted in a standard 19-inch rack. The base chassis includes:
- 4U, standard 19-inch rackmount enclosure
- One 2.2 GHz 64-bit processor
- Two GB random access ECC memory
- Two integrated gigabit Ethernet RJ45 ports
- Two integrated 4-Gbps small form factor (SFF) Fibre Channel ports
- One PCI-Express (PCIe) expansion slot
- One serial console port
- One integrated Remote LAN Management (RLM) port
- Redundant hot-swappable, auto-ranging power supplies and cooling fans
The Model A10 supports a maximum of one dual-path FC loop. The Model A10 can be upgraded to a maximum of 4 gigabit Ethernet ports via the addition of one optional dual-port Ethernet NIC (feature number 1012 or 1013). The Model A10 may be upgraded to a Model A20. The upgrade from a Model A10 to a Model A20 is a disruptive upgrade.
The Model A20 is designed to provide identical function as the N3600 Model A10, but with the addition of a second processor control module and the Clustered Failover (CFO) licensed function. The Model A20 also supports a maximum of 104 drives. The Model A20 consists of two processor control modules that are designed to provide failover and failback function, helping improve overall availability. The Model A20 is a 4U chassis.
The Model A20 includes:
- 4U, standard 19-inch rackmount enclosure
- Two 2.2 GHz 64-bit processors
- Four GB random access ECC memory
- Four integrated gigabit Ethernet RJ45 ports
- Four integrated 4-Gbps SFF Fibre Channel ports
- Two PCIe expansion slots
- Two serial console ports
- Two integrated RLM ports
- Redundant hot-swappable, auto-ranging power supplies and cooling fans
For the Model A20, the maximum number of additional expansion adapters is two. The Model A20 supports a maximum of one dual-path FC loop. The Model A20 can be upgraded to a maximum of eight gigabit Ethernet ports via the addition of two optional dual-port gigabit Ethernet NIC (feature number 1012 or 1013).
The EXN1000 storage expansion unit supports a 3U rackmountable disk enclosure containing 5, up to a maximum of 14, serial advanced technology attachment (SATA) disk drives. The EXN2000 and EXN4000 storage expansion units provide a 3U rack-mountable disk enclosure containing 5, up to a maximum of 14, FC disk drives.
Each EXNx000 storage expansion unit contains a maximum of 14 disk drives, all of a particular type (rotational speed and capacity). For the initial order of the IBM System Storage N3600, you may not include EXNx000 storage expansion units containing more than two types (rotational speed and capacity) of disk drives.
The maximum raw storage capacity of the N3600 system is determined by the number of disk drives supported. The N3600 Model A10 and Model A20 each support a maximum of 104 hard disk drives, 20 internal and 84 via storage expansion units (EXNx000).
The following table describes the maximum supported total physical storage capacity for the N3600 Model A10 and Model A20:
Maximum Maximum Maximum
Disk Disk drive storage disk physical
enclosure capacity enclosures drives capacity
144 GB SAS disk drives 20 2.88 TB
300 GB SAS disk drives 20 6.00 TB
EXN1000 250 GB SATA disk drives 6 84 21.00 TB
EXN1000 500 GB SATA disk drives 6 84 42.00 TB
EXN1000 750 GB SATA disk drives 6 84 63.00 TB
EXN2000 144 GB FC disk drives 6 84 12.09 TB
EXN2000 300 GB FC disk drives 6 84 25.20 TB
EXN4000 144 GB FC disk drives 6 84 12.09 TB
EXN4000 300 GB FC disk drives 6 84 25.20 TB
EXN1000 SATA storage expansion units, and EXN2000 and EXN4000 FC storage expansion units, must not share a Fibre Channel loop. A maximum of six storage expansion units are supported on a single Fibre Channel loop.
Section 508 of the U.S. Rehabilitation Act
The IBM System Storage N3600 is capable, as of September 7, 2007, when used in accordance with IBM's associated documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. A U.S. Section 508 Voluntary Product Accessibility Template (VPAT) can be requested via IBM's Web site at
Back to top
|
|
| Reference information |
|
Refer to Hardware Announcement 107-496 , dated August 28, 2007, N series function authorization for IBM System Storage N3300 and N3600, Model A10 and Model A20.
Business Partner information
If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID).
BP Attachment for Announcement Letter 107-495
Trademarks
Back to top
|
|
| Feature descriptions |
|
Adapter cards
All the adapter card slots of the N3600 are PCI-Express (PCIe) slots. The maximum number of adapters that may be added to the Model A10 is one; the maximum for the Model A20 is two.
When adapter cards are ordered for the Model A20 on the initial order, they must be ordered in pairs (an even number — an equal number for each node). For MES orders, this rule does not apply.
When upgrading from Model A10 to A20, the second node must have the same configuration as the first node. Adapter cards to match those in the first node must also be ordered.
2-Port Fiber GbE NIC (#1012): This gigabit Ethernet (1000Base-SX) PCIe feature provides two LC duplex connectors. The maximum supported distance is 275 meters using 62.5 micron MMF media and 550 meters using 50 micron MMF media. The Model A10 allows a maximum of one of this feature; Model A20 allows a maximum of two.
2-Port Cu GbE NIC (#1013): This 10/100/1000 Ethernet PCIe feature provides two RJ45 connectors and supports 10Base-T, 100Base-TX, and 1000Base-T Ethernet standards. The maximum supported distance is 100 meters using Cat. 5 UTP four-pair media. The Model A10 allows a maximum of one of this feature; Model A20 allows a maximum of two.
4-Gbps FC HBA — Disk, 2-port (#1014): This feature provides one PCIe dual-port 4-Gbps HBA for attaching disk expansion units (EXN1000, EXN2000, and EXN4000) to the N3600. This adapter auto-negotiates connections of 1-Gbps, 2-Gbps, or 4-Gbps. Two small form factor (SFF) multimode optical ports, with LC connectors, support the following cable lengths:
Link 50 micron 62.5 micron operating multimode multimode speed fiber fiber 1 Gbps 500 m 300 m 2 Gbps 300 m 150 m 4 Gbps 150 m 70 m
The ports of this adapter may not be used as FCP target ports.
The Model A10 allows a maximum of one of this feature; Model A20 allows a maximum of two.
4-Gbps FC HBA — Tape, 2-port (#1015): This feature provides one PCIe dual-port 4-Gbps HBA for attaching tape devices. This adapter auto-negotiates connections of 1-Gbps, 2-Gbps, or 4-Gbps. Two SFF multimode optical ports with LC connectors support the following cable lengths:
Link 50 micron 62.5 micron operating multimode multimode speed fiber fiber 1 Gbps 500 m 300 m 2 Gbps 300 m 150 m 4 Gbps 150 m 70 m
The ports of this adapter may not be used as FCP target ports.
A 50-micron optical loopback cable, with LC connectors, is included with this feature.
The Model A10 allows a maximum of one of this feature; Model A20 allows a maximum of two.
4-Gbps SFP GBIC (#2011): This feature provides two 4-Gbps small form factor pluggable (SFP) GBICs. They support 1 Gbps, 2 Gbps, and 4Gbps connections and are auto-switching. It is required if the N3600 is supporting the FCP feature (#6343 or #6393) to provide for the connection to a server which has a FC HBA.
For the initial order of Model A10, one of this feature is required for FCP; for Model A20, two are required.
Note: This feature should not be ordered for the N3600 for the purpose of attaching disk expansion units. For the purpose of attaching a disk expansion units, the 4-Gbps SFP GBIC must be ordered as a feature of the expansion unit (EXNx000).
Serial Attached SCSI (SAS) disk drive features (#40xx)
Feature Description 4014 144 GB, 15K RPM SAS HDD 4015 300 GB, 15K RPM SAS HDD
Each of these features provides one disk drive. The initial order for the N3600 Model A10 must include a minimum of 12 SAS HDD, up to a maximum of 20. For the N3600 Model A20, the minimum that must be included is 12, up to a maximum of 20. The disk drives installed within each model must be of the same type (interface, capacity, and speed).
HDD Blank Panel (#4099): This feature provides one blank panel used to close the space left vacant (the absence of a disk drive in a disk bay). Blank panels must be ordered in a quantity sufficient to cover any unpopulated bay, that is, the number of disk drives and blank panels for either model must equal 20 on the initial order.
Licensed function features
Licensed functions are authorized at the 2862 system level. Only one feature is required per 2862 system, regardless of the physical capacity within the 2862 system or the number of attached expansion units.
The following licensed functions are provided with the N3600 Models A10 and A20 at no additional charge:
Model A10 Model A20 feature feature Description 7001 7101 Data ONTAP NA 7105 CFO (Model A20 only)
The following additional licensed functions are available on the N3600 Models A10 and A20 as optional features:
Model A10 Model A20
feature feature Description
7002 7102 CIFS
7003 7103 HTTP
7004 7104 NFS
7011 7111 IBM System Storage™ N3600 with
FlexClone
7020 7120 IBM System Storage N3600 with
MultiStore
7022 7122 IBM System Storage N3600 with
NearStore
7025 7125 iSCSI Protocol
7031 7131 IBM System Storage N3600 with
SnapMirror
NA 7184 IBM System Storage N3600 with
SnapMover
7035 7135 IBM System Storage N3600 with
SnapRestore
7036 7136 IBM System Storage N3600 with
SnapVault Primary
7037 7137 IBM System Storage N3600 with
SnapVault Secondary
7042 7142 IBM System Storage N3600 with
SnapValidator
7043 7143 Fibre Channel Protocol
7044 7144 Disk Sanitization
7045 7145 SnapManager/Exchange — Filer
7046 7146 SnapManager/SQL — Filer
7047 7147 Adv. Single Instance Storage
8000 8000 SnapDrive — AIX® 1-2 Procs
8001 8001 SnapDrive — AIX 3-4 Procs
8002 8002 SnapDrive — AIX 5-8 Procs
8003 8003 SnapDrive — AIX 9+ Procs
8004 8004 SnapDrive — HPUX 1-2 Procs
8005 8005 SnapDrive — HPUX 3-4 Procs
8006 8006 SnapDrive — HPUX 5-8 Procs
8007 8007 SnapDrive — HPUX 9+ Procs
8008 8008 SnapDrive — Solaris 1-2 Proc
8009 8009 SnapDrive — Solaris 3-4 Proc
8010 8010 SnapDrive — Solaris 5-8 Proc
8011 8011 SnapDrive — Solaris 9+ Procs
8020 8020 SnapDrive — Linux™ 1-2 Procs
8021 8021 SnapDrive — Linux 3-4 Procs
8022 8022 SnapDrive — Linux 5-8 Procs
8023 8023 SnapDrive — Linux 9+ Procs
8040 8040 SnapDrive for UNIX® Media Kit
8050 8050 SnapDrive for Windows™
8051 8051 SnapDrive for Win Media Kit
8052 8052 ONTAP DSM for Windows MPIO
8053 8053 ONTAP DSM Win MPIO Media Kit
8100 8100 FCP Host Attach Kit — Win
8110 8110 Base FCP Host Atch Kit — AIX
8111 8111 AIX Multipathing — 1-2 Procs
8112 8112 AIX Multipathing — 3-4 Procs
8113 8113 AIX Multipathing — 5-8 Procs
8114 8114 AIX Multipathing — 9+ Procs
8119 8119 AIX Media Kit for Multipath
8120 8120 FCP Host Attach Kit — Linux
8121 8121 FCP Host Attach Kit — HPUX
8122 8122 FCP Host Atch Kit — Solaris
8123 8123 FCP Host Utilities — VMWare
8131 8131 SnapManager/Exchange — Host
8132 8132 SnapManager/Exch — Media Kit
8141 8141 SnapManager for SQL — Host
8142 8142 SnapManager/SQL — Media Kit
8143 8143 SnapManager for Oracle
8144 8144 SnapManager/Oracle-Media Kit
8145 8145 SnapManager for SAP
8146 8146 SnapManager/SAP-Media Kit
8150 8150 Single Mbox Recovery 100 pk
8151 8151 Single Mbox Recovery 500 pk
8152 8152 Single Mbox Recovery 1000 pk
8153 8153 Single Mbox Recovery 2500 pk
8154 8154 Single Mbox Recovery 5K pk
8155 8155 Single Mbox Recovery 10K pk
8156 8156 Single Mbox Recovery 50K pk
8157 8157 Single Mbox Recovery Med Kt
8158 8158 SMBR CA-ARCSERVE Extract Wiz
8159 8159 SMBR Tivoli® Tape Extract Wiz
8160 8160 SMBR Legato Tape Extract Wiz
8161 8161 SMBR NetBackup Extract Wiz
8162 8162 SMBR PST Tape Extract Wiz
8163 8163 SMBR HP Extract Wiz
8164 8164 SMBR Commvault Galaxy Ex Wiz
8165 8165 SMBR UltraBac Extract Wizard
8166 8166 SMBR Agent for Adv Search
8167 8167 SMBR Content Analysis Wizard
8257 8257 Op Mgr Store Resource Mgmt
8258 8258 Operations Mgr Media Kit
8261 8261 Ops Mgr Core tier 1 license
8262 8262 Ops Mgr Core tier 2 license
8263 8263 Ops Mgr Core tier 3 license
8264 8264 Ops Mgr Core tier 4 license
8265 8265 Ops Mgr Core tier 5 license
8266 8266 Ops Mgr Core tier 6 license
8267 8267 Ops Mgr Core tier 7 license
8268 8268 Protect Mgr tier 1 license
8269 8269 Protect Mgr tier 2 license
8270 8270 Protect Mgr tier 3 license
8271 8271 Protect Mgr tier 4 license
8272 8272 Protect Mgr tier 5 license
8273 8273 Protect Mgr tier 6 license
8274 8274 Protect Mgr tier 7 license
Licensed function indicators
Note: For all licensed function indicators, the corequisite 2870 feature must be purchased to establish authorization for use of the corresponding licensed function before the feature activation code is provided by IBM.
Data ONTAP (#7001 and #7101): This feature enables the Data ONTAP licensed function. Data ONTAP is an optimized, scalable, and flexible operating system for the IBM N series storage controllers that is designed for heterogeneous environments. Data ONTAP is designed to deliver flexible management and high availability, support business continuance, and support data retention, thereby helping reduce storage management complexity in your enterprise. Data ONTAP includes FlexShare, FlexCache, FlexVol, and Snapshot support.
CIFS (#7002 and #7102): This feature enables the CIFS licensed function, which is designed to provide connectivity to client machines so that data can be transferred via the CIFS protocol. This feature is also used for maintenance billing purposes.
The corequisite 2870 feature must be purchased to establish authorization for use of the CIFS licensed function before the feature activation code is provided by IBM.
HTTP (#7003 and #7103): This feature enables the HTTP licensed function, which is designed to provide data transfer to and from the N3600 storage controllers via the HTTP protocol. This feature is also used for maintenance billing purposes.
NFS (#7004 and #7104): This feature enables the NFS licensed function provided you have applied a feature activation code that is made available by IBM. The NFS licensed function is designed to provide connectivity to client machines that transfer data via the NFS protocol. This feature is also used for maintenance billing purposes.
CFO (#7105 — A20 only): Installed on a pair of N series storage controllers, this feature is designed to enable the transfer of data service from an unavailable controller to the other controller in the cluster. It is designed to deliver a robust and highly available data service for business-critical environments.
FlexClone (#7011 and #7111): This feature enables the FlexClone licensed function provided you have applied a feature activation code that is made available by IBM. FlexClone is designed to enable true cloning — near-instant replication of data volumes and data sets — without requiring additional storage space at the time of creation. This feature is also used for maintenance billing purposes.
MultiStore (#7020 and #7120): This feature enables the MultiStore licensed function provided you have applied a feature activation code that is made available by IBM. MultiStore is designed to enable multiprotocol storage consolidation across enterprises. It is designed to provide partitioning of network and storage resources, and enable multidomain and multiserver consolidation on a single storage appliance. In addition, it is designed to help reduce data management cost by introducing a tiered management model enabling cost-effective administration. This feature is also used for maintenance billing purposes.
Note: The combination of Fibre Channel Protocol (#7043 and #7143) and MultiStore (#7020 and #7120) is supported only on virtual filer 0. They are otherwise mutually exclusive.
NearStore (#7022 and #7122): This feature is designed to help optimize an N3600 storage controller for data protection and retention applications. It enables additional concurrent streams and SnapVault for NetBackup.
iSCSI Protocol (#7025 and #7125): This feature enables the iSCSI Protocol licensed function, which is designed to provide connectivity to clients that transfer data via the iSCSI protocol. You must apply a feature activation code made available by IBM. This feature is also used for maintenance billing purposes.
SnapMirror (#7031 and #7131): This feature enables the SnapMirror licensed function provided you have applied a feature activation code that is made available by IBM. SnapMirror is designed to replicate data between one or more N series storage controllers. It is designed to continually update the mirrored data to help keep it current and available for disaster recovery, offloading tape backup, read-only data distribution, testing on nonproduction systems, and online data migration. This feature is also used for maintenance billing purposes.
SnapMover (#7134 — Model A20 only): This feature enables the SnapMover licensed function provided you have applied a feature activation code that is made available by IBM. SnapMover is designed to provide a no-copy data migration solution for workload distribution among N series storage controllers sharing common backend storage while avoiding impact to data availability and disruption to users. This helps organizations to efficiently address evolving storage and performance requirements while maintaining user productivity. This feature is also used for maintenance billing purposes.
SnapRestore (#7035 and #7135): This feature enables the SnapRestore licensed function provided you have applied a feature activation code that is made available by IBM. SnapRestore is designed to help an enterprise to recover from data loss that may occur due to user error, viruses, or many other disasters. SnapRestore is designed to help users recover data, from individual files to multiterabyte volumes, using snapshot copies, to help allow quick resumption of operations. This feature is also used for maintenance billing purposes.
SnapVault features
SnapVault provides a centralized disk-based backup solution for heterogeneous storage environments. Storing backup data in multiple snapshot copies on the SnapVault secondary storage system from multiple SnapVault primary systems helps let enterprises keep weeks of backups online for fast restoration. Backing up multiple SnapVault primary storage systems to a single SnapShot copy on a large SnapVault secondary storage system can help allow enterprises to centralize their backup and restore operations in a single location. SnapVault primary storage systems can be local or remote N3600 storage controllers, Windows servers, or UNIX servers connected via a LAN or a WAN. The SnapVault secondary storage system can also be located at a remote disaster recovery site to help protect against production site failures.
SnapVault Primary and SnapVault Secondary may be concurrently installed on an N3600 Model A20. This allows data to be backed up from one node of the Model A20 to the other node. Each must be installed on its own node, that is, SnapVault Primary must be installed on one of the two nodes and SnapVault Secondary on the other. They may never both be installed on the same node. Data ONTAP 7.2.1, or later is required.
SnapVault Primary (#7036 and #7136): This feature enables the SnapVault Primary licensed function provided you have applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.
SnapVault Secondary (#7037 and #7137): This feature enables the SnapVault Secondary licensed function provided you have applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.
SnapValidator (#7042 and #7142): This feature enables the SnapValidator licensed function provided you have applied a feature activation code that is made available by IBM. SnapValidator is tightly integrated with the Oracle database architecture and complies with the Oracle Hardware Assisted Resilient Data (HARD) initiative. It is designed to detect and prevent potential corruptions of Oracle data before they happen. By adding intelligence and database awareness to modular storage systems (across SAN, iSAN, and NAS protocols) IBM N3600 SnapValidator helps to enable advanced database protection functionality to a broader array of organizations. This feature is also used for maintenance billing purposes.
Fibre Channel Protocol (#7043 and #7143): This feature enables the Fibre Channel Protocol licensed function, which is designed to provide connectivity to client machines that transfer data via the FCP protocol provided you have applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.
Note: The combination of Fibre Channel Protocol (#7043 and #7143) and MultiStore (#7020 and #7120) is supported only on virtual filer 0. They are otherwise mutually exclusive.
Disk Sanitization (#7044 and #7144): This feature enables the Disk Sanitization licensed function provided you have applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes.
SnapManager/Exchange — Filer (#7045 and #7145): This feature enables the SnapManager/Exchange — Filer licensed function provided you have applied a feature activation code that is made available by IBM. IBM SnapManager for Microsoft™ Exchange is a comprehensive data management solution designed to streamline storage management while simplifying configuration, backup, and restore operations for Exchange databases. Deployed in combination with N3600 storage systems, SnapManager software is designed to provide near-instantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for Exchange environments.
This feature allows connectivity of any number of exchange servers to one N3600 storage controller.
Note: SnapManager/Exchange — Filer and SnapManager/Exchange — Host (#8131) provide identical function but support different numbers of hosts. Only one or the other is needed, not both. SnapManager/Exchange — Filer allows connectivity to any number of hosts; SnapManager/Exchange — Host allows just one host connection. If the planned number of hosts to be supported, multiplied by the feature #8131 price, is greater than the price of SnapManager/Exchange — Filer (#7045 or #7145), #7045 or #7145 may be a more cost-effective choice. Other factors may influence this decision.
This feature requires either FCP or iSCSI Protocol, and SnapRestore, SnapManager/Exch — Media Kit, and SnapDrive for Windows to be installed on the machine.
This feature is also used for maintenance billing purposes.
SnapManager/SQL — Filer (#7046 and #7146): This feature enables the SnapManager/SQL — Filer licensed function provided you have applied a feature activation code that is made available by IBM. IBM SnapManager for Microsoft SQL is a comprehensive data management solution designed to streamline storage management while simplifying configuration, backup, and restore operations for Exchange databases. Deployed in combination with N3600 storage systems, SnapManager software is designed to provide near-instantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for SQL environments.
This feature allows connectivity of any number of SQL servers to one N3600 storage controller.
Note: SnapManager/SQL — Filer and SnapManager for SQL — Host (#8141) provide identical function but support different numbers of hosts. Only one or the other is needed, not both. SnapManager/SQL — Filer allows connectivity to any number of hosts; SnapManager for SQL — Host allows just one host connection. If the planned number of hosts to be supported, multiplied by the feature #8141 price, is greater than the price of SnapManager/SQL — Filer (#7046 or #7146), #7046 or #7146 may be a more cost-effective choice. Other factors may influence this decision.
This feature requires either FCP or iSCSI Protocol, and SnapRestore, SnapManager/SQL — Media Kit, and SnapDrive for Windows to be installed on the machine.
This feature is also used for maintenance billing purposes.
Adv. Single Instance Storage (A-SIS) (#7047 and #7147): This feature is designed to provide block-level deduplication within the entire flexible volume on an IBM N series storage controller that has the NearStore feature enabled. A-SIS only stores unique data blocks in the flexible volume and creates a small amount of additional metadata in the process. Each block of data has a digital "signature" that is compared to all other signatures in the flexible volume. If an exact byte-for-byte block match exists on the flexible volume, the duplicate block is discarded and its disk space is reclaimed.
Host software
Note: For all host software, the corequisite 2870 feature must be purchased to establish authorization for use of the corresponding licensed function before the feature activation code is provided by IBM.
SnapDrive for AIX
These features provide a software application designed to enhance the storage management capabilities in an AIX environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.
Notes:
- Use of these features with FCP attachment requires the FCP Protocol feature, #7043 or #7143 on the N3600, as well as corequisite #8110.
- Use of these features with iSCSI attachment requires the iSCSI Protocol feature, #7025 or #7125 on the N3600, as well as corequisite #8110. The iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from
SnapDrive — AIX 1-2 Procs (#8000): This feature provides SnapDrive for AIX support for a single host with 1 or 2 processors.
SnapDrive — AIX 3-4 Procs (#8001): This feature provides SnapDrive for AIX support for a single host with 3 or 4 processors.
SnapDrive — AIX 5-8 Procs (#8002): This feature provides SnapDrive for AIX support for a single host with 5, 6, 7, or 8 processors.
SnapDrive — AIX 9+ Procs (#8003): This feature provides SnapDrive for AIX support for a single host with 9 or more processors.
SnapDrive for HPUX
These features provide a software application designed to enhance the storage management capabilities in an HP-UX environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.
Notes:
- Use of these features with FCP attachment requires the FCP Protocol feature, #7043 or #7143 on the N3600, as well as the corequisite, #8121.
- Use of these features with iSCSI attachment requires the iSCSI Protocol feature, #7025 or #7125 on the N3600, as well as corequisite #8110. The iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from
SnapDrive — HPUX 1-2 Procs (#8004): This feature provides SnapDrive for HP-UX support for a single host with 1 or 2 processors.
SnapDrive — HPUX 3-4 Procs (#8005): This feature provides SnapDrive for HP-UX support for a single host with 3 or 4 processors.
SnapDrive — HPUX 5-8 Procs (#8006): This feature provides SnapDrive for HP-UX support for a single host with 5 to 8 processors.
SnapDrive — HPUX 9+ Procs (#8007): This feature provides SnapDrive for HP-UX support for a single host with 9 or more processors.
SnapDrive for Solaris
These features provide a software application designed to enhance the storage management capabilities in a Solaris environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.
Notes:
- Use of these features with FCP attachment requires the FCP Protocol feature, #7043 or #7143 on the N3600, as well as the corequisite, #8122.
- Use of these features with iSCSI attachment requires the iSCSI Protocol feature, #7025 or #7125 on the N3600, as well as corequisite #8110. The iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from
SnapDrive — Solaris 1-2 Proc (#8008): This feature provides SnapDrive for Solaris support for a single host with 1 or 2 processors.
SnapDrive — Solaris 3-4 Proc (#8009): This feature provides SnapDrive for Solaris support for a single host with 3 or 4 processors.
SnapDrive — Solaris 5-8 Proc (#8010): This feature provides SnapDrive for Solaris support for a single host with 5 to 8 processors.
SnapDrive — Solaris 9+ Procs (#8011): This feature provides SnapDrive for Solaris support for a single host with 9 or more processors.
SnapDrive for Linux
These features provide a software application designed to enhance the storage management capabilities in an Linux environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed.
Notes:
- Use of these features with FCP attachment requires the FCP Protocol feature, #7043 or #7143 on the N5600, as well as the corequisite, #8120.
- Use of these features with iSCSI attachment requires the iSCSI Protocol feature, #7025 or #7125 on the N3600, as well as corequisite #8110. The iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from
SnapDrive — Linux 1-2 Procs (#8020): This feature provides SnapDrive for Linux support for a single host with 1 or 2 processors.
SnapDrive — Linux 3-4 Procs (#8021): This feature provides SnapDrive for Linux support for a single host with 3 or 4 processors.
SnapDrive — Linux 5-8 Procs (#8022): This feature provides SnapDrive for Linux support for a single host with 5 to 8 processors.
SnapDrive — Linux 9+ Procs (#8023): This feature provides SnapDrive for Linux support for a single host with 9 or more processors.
SnapDrive for UNIX Media Kit (#8040): This feature provides a physical media kit that includes SnapDrive for Linux, Solaris, AIX, and HP-UX.
SnapDrive for Windows (#8050): This feature provides SnapDrive for Windows function. One feature must be ordered for each host on which it will be installed. It provides a software application that is designed to enhance the storage management capability in a Windows environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management.
Notes:
- Feature number 8052 is highly recommended when using feature number 8050 with FCP.
- If running with FCP, feature #8100 is a corequisite. If running with iSCSI, the iSCSI Host Support Kit is required. The iSCSI Host Support Kit is available for download from
SnapDrive for Windows Media Kit (#8051): This feature provides a physical media kit that includes SnapDrive for Windows. This feature is required when ordering #8050.
ONTAP DSM for Windows MPIO (#8052): This feature provides the multipathing MPIO driver for FC data transmission in Windows environments connected to N series machines. It is required when FC multipathing function is required.
Note: Feature number 8052 is highly recommended when using feature number 8050 with FCP.
ONTAP DSM Win MPIO Media Kit (#8053): This feature provides the physical media kit for the ONTAP DSM for Windows MPIO (#8052). This feature is required when ordering #8052.
FCP Host Attach Kit — Windows (#8100): This feature provides a Host Attach Kit for Windows that includes drivers, support scripts, installation scripts, and documentation. One kit must be ordered for each host that is to be attached via FCP.
Base FCP Host Atch Kit — AIX (#8110): This feature provides the base Host Attach Kit for AIX that includes drivers, support scripts, installation scripts, and documentation. Physical media is included.
Notes:
- If Dot Hill SANPath multipathing support is required for the host, the appropriate AIX Multipathing feature (#8111 — #8114) must also be ordered.
- If only native AIX MPIO support is required for the host, you should verify the desired configuration in the N series interoperability matrix; an AIX Multipathing feature is not required.
AIX Multipathing — 1-2 Procs (#8111): This feature is designed to enable, and is required for, multipathing support using Dot Hill SANPath drivers for a single host with 1 or 2 processors. You must also order the Base FCP Host AIX Attach Kit for AIX (#8110) and the AIX Media Kit for Multipath feature (#8119) if this feature is ordered.
AIX Multipathing — 3-4 Procs (#8112): This feature is designed to enable, and is required for, AIX multipathing support using Dot Hill SANPath drivers for a single host with 3 or 4 processors. You must also order the Base FCP Host Attach Kit for AIX (#8110) and the AIX Media Kit for Multipath feature (#8119) if this feature is ordered.
AIX Multipathing — 5-8 Procs (#8113): This feature is designed to enable, and is required for, AIX multipathing support using Dot Hill SANPath drivers for a single host with 5 to 8 processors. You must also order the Base FCP Host Attach Kit for AIX (#8110) and the AIX Media Kit for Multipath feature (#8119) if this feature is ordered.
AIX Multipathing — 9+ Procs (#8114): This feature is designed to enable, and is required for, AIX multipathing support using Dot Hill SANPath drivers for a single host with 9 or more processors. You must also order the Base FCP Host Attach Kit for AIX (#8110) and the AIX Media Kit for Multipath feature (#8119) if this feature is ordered.
AIX Media Kit for Multipath (#8119): This feature provides a physical media kit that includes the Dot Hill Multipathing Drivers.
FCP Host Attach Kit — Linux (#8120): This feature provides a Host Attach Kit for Linux that includes all necessary drivers, support scripts, installation scripts, and documentation. A physical media kit is included with this feature.
FCP Host Atch Kit — HPUX (#8121): This feature provides a software application designed to enhance the storage management capabilities in an HP-UX environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. A physical media kit is included with this feature. One feature must be ordered for each host on which the feature will be installed.
FCP Host Atch Kit — Solaris (#8122): This feature provides a software application designed to enhance the storage management capabilities in a Solaris environment, including easier dynamic volume management, cluster management, snapshot management, and replication management. A physical media kit is included with this feature. One feature must be ordered for each host on which the feature will be installed.
FCP Host Utilities — VMWare (#8123): This feature provides a host attach kit for VMWare that includes various drivers, support scripts, installation scripts, and documentation. A physical media kit is included with this feature.
SnapManager/Exchange — Host (#8131): This feature allows connection of one exchange host server to a storage controller. One of this feature is required for each exchange host. The Fibre Channel Protocol feature or iSCSI must be installed on the attached storage controller.
Note: SnapManager/Exchange — Host and SnapManager/Exchange — Filer (#7045 or #7145) provide identical function but support different numbers of hosts. Only one or the other is needed, not both. SnapManager/Exchange — Filer allows connectivity to any number of hosts; SnapManager/Exchange — Host allows just one host connection. If the planned number of hosts to be supported, multiplied by the feature #8131 price, is greater than the price of SnapManager/Exchange — Filer (#7045 or #7145), #7045 or #7145 may be a more cost-effective choice. Other factors may influence this decision.
This feature requires either FCP or iSCSI Protocol, and SnapRestore, SnapManager/Exch — Media Kit, and SnapDrive for Windows to be installed on the machine.
SnapManager/Exch — Media Kit (#8132): This feature provides the physical media kit for SnapManager for Exchange. Only one media kit is needed for a single SnapManager for Exchange — Filer or Host license. You may order more than one, but a single media kit may be installed on multiple hosts or storage controllers.
SnapManager for SQL — Host (#8141): This feature allows connection of one SQL host server to a storage controller. One of this feature is required for each SQL host. The Fibre Channel Protocol feature or iSCSI must be installed on the attached storage controller.
Note: SnapManager for SQL — Host and SnapManager/SQL — Filer (#7046 or #7146) provide identical function but support different numbers of hosts. Only one or the other is needed, not both. SnapManager/SQL — Filer allows connectivity to any number of hosts, SnapManager for SQL — Host allows just one host connection. If the planned number of hosts to be supported, multiplied by the feature #8141 price, is greater than the price of SnapManager/SQL — Filer (#7046 or #7146), #7046 or #7146 may be a more cost-effective choice. Other factors may influence this decision.
This feature requires either FCP or iSCSI Protocol, and SnapRestore, SnapManager/SQL — Media Kit, and SnapDrive for Windows to be installed on the machine.
SnapManager/SQL — Media Kit (#8142): This feature provides the physical media kit for SnapManager for SQL. Only one media kit is needed for a single SnapManager for SQL — Filer or Host license. You may order more than one, but a single kit may be installed on multiple hosts or storage controllers.
SnapManager for Oracle (#8143): IBM SnapManager for Oracle is designed to integrate with an Oracle database and automate crucial tasks such as backup, restore, database recovery, and cloning. This feature allows connection of one Oracle host server to a storage controller. One of this feature is required for each Oracle host.
Note: FlexClone is required with NFS and is optional for FCP and iSCSI environments. SnapRestore (#7035 and #7135) is always required with SnapManager for Oracle. The necessary SnapDrive code and license are included as part of the SnapManager for Oracle feature. When using iSCSI or FCP, you must have the appropriate host support kit (iSCSI — downloadable) or FCP Host Atch Kit — Solaris (#8122) feature available.
SnapManager for Oracle requirements vary depending on the host OS. For full details on supported OS levels, Oracle database levels, and other SnapManager for Oracle requirements, refer to the N series interoperability matrix at
SnapManager/Oracle-Media Kit (#8144): This feature provides the physical media kit for SnapManager for Oracle. Only one media kit is needed for a single SnapManager for Oracle license. You may order more than one, but a single kit may be installed on multiple hosts or storage controller.
SnapManager for SAP (#8145): This feature is designed to allow SAP administrators to backup and restore a SAP System hosted on an Oracle Database. It is integrated with the interface for SAP br* tools for backup and recovery of SAP systems as well as with the N series data management tools. It is designed to simplify provisioning and data protection on enterprise SAP systems.
This feature includes feature #8040, SnapDrive for UNIX Media Kit, and SnapManager for Oracle (#8143). Features #8000 through #8023 and #8143 need not be ordered if SnapManager for SAP (#8145) is ordered.
One of this feature must be ordered for each CPU on each host on which it will be installed.
Note: FlexClone is required with NFS and is optional for FCP and iSCSI environments. SnapRestore (#7035 and #7135) is always required with SnapManager for Oracle. The necessary SnapDrive code and license are included as part of the SnapManager for Oracle feature. When using iSCSI or FCP, you must have the appropriate host support kit (iSCSI — downloadable) or FCP Host Atch Kit — Solaris (#8122) feature available.
SnapManager/SAP-Media Kit (#8146): This feature provides the physical media kit for SnapManager for SAP. Only one media kit is needed for a single SnapManager for SAP license. You may order more than one, but a single kit may be installed on multiple hosts or storage controllers.
Single Mailbox Recovery
Single Mailbox Recovery for Microsoft Exchange (SMBR) software is designed to provide rapid recovery of single mailboxes, individual folders, or single messages from a valid SnapManager backup to the production Exchange server, to any offline Exchange server, or to an Outlook .pst file. The software can help save time and money by avoiding the need for cumbersome and disk-intensive brick-level backups or investments in a dedicated recovery server infrastructure.
Single Mbox Recovery 100pk (#8150): This feature provides support for 100 mailboxes.
Single Mbox Recovery 500pk (#8151): This feature provides support for 500 mailboxes.
Single Mbox Recovery 1000pk (#8152): This feature provides support for 1,000 mailboxes.
Single Mbox Recovery 2500pk (#8153): This feature provides support for 2,500 mailboxes.
Single Mbox Recovery 5K pk (#8154): This feature provides support for 5,000 mailboxes.
Single Mbox Recovery 10K pk (#8155): This feature provides support for 10,000 mailboxes.
Single Mbox Recovery 50K pk (#8156): This feature provides support for 50,000 mailboxes.
Single Mbox Recovery Med Kt (#8157): This feature provides the physical media kit for Single Mailbox Recovery. Only one media kit is needed for a single Single Mailbox Recovery license. You may order more than one, but a single media kit may be installed on multiple Exchange Hosts.
SMBR CA-ARCSERVE Extract Wiz (#8158): The CA-ARCSERVE Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR Tivoli Tape Extract Wiz (#8159): The Tivoli Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR Legato Tape Extract Wiz (#8160): The Legato Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR NetBackup Extract Wiz (#8161): The NetBackup Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR PST Tape Extract Wiz (#8162): The PST Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR HP Extract Wiz (#8163): The HP Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR Commvault Galaxy Ex Wiz (#8164): The Commvault Galaxy Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR UltraBac Extract Wizard (#8165): The UltraBac Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR Agent for Adv Search (#8166): The SMBR Agent for Advanced Search is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server.
SMBR Content Analysis Wizard (#8167): The SMBR Content Analysis Wizard (CAW) is designed to enable you to automate and save search results with Microsoft Exchange by selecting sources, including entire Exchange Database (EDB) files, individual mailboxes from an EDB, or folders from an EDB. Any number of sources is allowed, including multiple EDBs.
CAW provides a method for e-mail administrators to perform content analysis offline from the production server. It is designed to:
- Minimize the time it takes to detect and filter out e-mails that include specific content
- Minimize the time it takes to detect and filter out a specific type of e-mail file that is being sent or received (for example, specific extension, subject, date), or e-mails being sent and received
- Analyze the number of e-mails being sent and received that contain politically incorrect content (for example tasteless jokes or pornography)
- Analyze the number of e-mails with confidential content that go out unprotected, that is, unencrypted.
- Minimize the time it takes to determine if someone is using the system for unauthorized activity (for example, spamming, inappropriate downloads, starting a business)
Operations Manager Core (OMC)
The OMC features are designed to provide a central point of control and to provide alerts, reports, and configuration tools. These tools are designed to help manage storage and content delivery infrastructure, consistent with business requirements, and help maximize availability and reduce total cost of ownership.
OMC provides a license that allows the use of the OMC features on the N series machine for which they are ordered. This machine is the "managing" machine; those to be managed are the "managed" machines. All OMC features must be ordered for only the managing machine. One tier license feature must be ordered for each node to be managed, including the nodes of the managing machine.
A Model A10 and G10 consists of one node; a Model A20 and G20 consists of two nodes. On the initial order, the number (quantity) of the tier features ordered defines the number of managed nodes, and the N series machine types and models, for which the feature is authorized. That number may be increased via a subsequent (MES) order by ordering the incremental number of OMC tier x license features (#826x). The MES order must be for the managing machine. For example, if the number of nodes to be managed is to be increased by ten, the number of #826x features, which must be ordered in the MES order, is ten. Any combination of #826x features may be included in the same MES order.
It is necessary to select the appropriate tier for each N series machine you will be managing with the OMC license. Multiple N series machines are managed with one OMC license, but the support for multiple machines must be reflected in the tiers that are ordered. The relationship of N series machines to tiers, and associated feature numbers, is as follows.
Machine Operations Manager feature
N series type model number name
N3300 2859 A10 8261 Ops Mgr Core tier 1 license
A20 8261 Ops Mgr Core tier 1 license
N3600 2862 A10 8262 Ops Mgr Core tier 2 license
A20 8262 Ops Mgr Core tier 2 license
N3700 2863 A10 8262 Ops Mgr Core tier 2 license
A20 8262 Ops Mgr Core tier 2 license
N5200 2864 A10 8263 Ops Mgr Core tier 3 license
A20 8263 Ops Mgr Core tier 3 license
G10 8263 Ops Mgr Core tier 3 license
G20 8263 Ops Mgr Core tier 3 license
N3600 2869 A10 8265 Ops Mgr Core tier 5 license
A20 8264 Ops Mgr Core tier 4 license
G10 8265 Ops Mgr Core tier 5 license
G20 8264 Ops Mgr Core tier 4 license
N5500 2865 A10 8265 Ops Mgr Core tier 5 license
A20 8264 Ops Mgr Core tier 4 license
G10 8265 Ops Mgr Core tier 5 license
G20 8264 Ops Mgr Core tier 4 license
N5600 2868 A10 8266 Ops Mgr Core tier 6 license
A20 8265 Ops Mgr Core tier 5 license
G10 8266 Ops Mgr Core tier 6 license
G20 8265 Ops Mgr Core tier 5 license
N7600 2866 A10 8266 Ops Mgr Core tier 6 license
A20 8266 Ops Mgr Core tier 6 license
G10 8266 Ops Mgr Core tier 6 license
G20 8266 Ops Mgr Core tier 6 license
N7800 2867 A10 8267 Ops Mgr Core tier 7 license
A20 8267 Ops Mgr Core tier 7 license
G10 8267 Ops Mgr Core tier 7 license
G20 8267 Ops Mgr Core tier 7 license
For example, to use OMC to manage one N3700 Model A20, five N5200 Model A10s, and two N7800 Model G20s, you would order two of #8262, five of #8263, and four of #8267.
The initial order of these features provides a key that allows OMC support of the number of nodes specified. When the number of nodes is increased by a subsequent order, a new key is assigned allowing use of OMC for the new total number of nodes. The old key is rendered obsolete.
Note: The OMC requires only one of feature #8258, regardless of the number of nodes to be managed.
Op Mgr Store Resource Mgmt (#8257): This feature provides advanced function of Operations Manager. It is designed to provide detailed storage utilization reports to aid capacity planning, consumption management, data migration, and chargeback.
This feature requires one of the OMC tier license features.
Operations Mgr Media Kit (#8258): This feature provides the media kit required by OMC. One media kit supports multiple hosts.
This feature requires one of the OMC tier license features.
Ops Mgr Core tier 1 license (#8261): This feature provides a license allowing use of the Operations Manager on one node of an N series tier 1 machine. One of this feature must be ordered for each node requiring a tier 1 Operations Manager license.
Ops Mgr Core tier 2 license (#8262): This feature provides a license allowing use of the Operations Manager on one node of an N series tier 2 machine. One of this feature must be ordered for each node requiring a tier 2 Operations Manager license.
Ops Mgr Core tier 3 license (#8263): This feature provides a license allowing use of the Operations Manager on one node of an N series tier 3 machine. One of this feature must be ordered for each node requiring a tier 3 Operations Manager license.
Ops Mgr Core tier 4 license (#8264): This feature provides a license allowing use of the Operations Manager on one node of an N series tier 4 machine. One of this feature must be ordered for each node requiring a tier 4 Operations Manager license.
Ops Mgr Core tier 5 license (#8265): This feature provides a license allowing use of the Operations Manager on one node of an N series tier 5 machine. One of this feature must be ordered for each node requiring a tier 5 Operations Manager license.
Ops Mgr Core tier 6 license (#8266): This feature provides a license allowing use of the Operations Manager on one node of an N series tier 6 machine. One of this feature must be ordered for each node requiring a tier 6 Operations Manager license.
Ops Mgr Core tier 7 license (#8267): This feature provides a license allowing use of the Operations Manager on one node of an N series tier 7 machine. One of this feature must be ordered for each node requiring a tier 7 Operations Manager license.
Protection Manager
This feature provides backup and replication management software for an N series disk-based data protection environment. It is designed to help protect data and support high productivity by providing policy-based management, including when used in automated data protection configurations.
At least one of the OMC tier license features is a prerequisite of the Protection Manager feature.
Protection Manager provides a license that allows the use of the Protection Manager features on the N series machine for which they are ordered. This machine is the "managing" machine; those to be managed are the "managed" machines. All Protection Manager features must be ordered for only the managing machine. One tier license feature must be ordered for each node to be managed, including the nodes of the managing machine.
A Model A10 consists of one node; a Model A20 consists of two nodes. On the initial order, the number (quantity) of the tier features ordered defines the number of managed nodes, and the N series machine types and models, for which the feature is authorized. That number may be increased via a subsequent (MES) order by ordering the incremental number of Protection Manager tier x license features (#82xx). The MES order must be for the managing machine. For example, if the number of nodes to be managed is to be increased by ten, the number of #82xx features, which must be ordered in the MES order, is ten. Any combination of #82xx features may be included in the same MES order.
It is necessary to select the appropriate tier for each N series machine you will be managing with the Protection Manager license. Multiple N series machines are managed with one Protection Manager license, but the support for multiple machines must be reflected in the tiers that are ordered. The relationship of N series machines to tiers, and associated feature numbers, is as follows.
You should purchase Protection Manager license for all nodes running SnapMirror (Source or Destination) and SnapVault (Primary or Secondary) that you want to manage with Protection Manager. Operation Manager is a prerequisite for each system to be managed using Protection Manager. The Protection Manager serial number should be tied to the same managing machine serial number against which the Operation Manager is ordered. The Operation Manager and Protection Manager license keys must be activated on the same managing machine.
Machine Protection Manager feature
N series type model number name
N3300 2859 A10 8268 Protect Mgr tier 1 license
2859 A20 8268 Protect Mgr tier 1 license
N3600 2862 A10 8269 Protect Mgr tier 2 license
2862 A20 8269 Protect Mgr tier 2 license
N3700 2863 A10 8269 Protect Mgr tier 2 license
A20 8269 Protect Mgr tier 2 license
N5200 2864 A10 8270 Protect Mgr tier 3 license
A20 8270 Protect Mgr tier 3 license
G10 8270 Protect Mgr tier 3 license
G20 8270 Protect Mgr tier 3 license
N5300 2869 A10 8272 Protect Mgr tier 5 license
A20 8271 Protect Mgr tier 4 license
G10 8272 Protect Mgr tier 5 license
G20 8271 Protect Mgr tier 4 license
N5500 2865 A10 8272 Protect Mgr tier 5 license
A20 8271 Protect Mgr tier 4 license
G10 8272 Protect Mgr tier 5 license
G20 8271 Protect Mgr tier 4 license
N5600 2868 A10 8273 Protect Mgr tier 6 license
A20 8272 Protect Mgr tier 5 license
G10 8273 Protect Mgr tier 6 license
G20 8272 Protect Mgr tier 5 license
N7600 2866 A10 8273 Protect Mgr tier 6 license
A20 8273 Protect Mgr tier 6 license
G10 8273 Protect Mgr tier 6 license
G20 8273 Protect Mgr tier 6 license
N7800 2867 A10 8274 Protect Mgr tier 7 license
A20 8274 Protect Mgr tier 7 license
G10 8274 Protect Mgr tier 7 license
G20 8274 Protect Mgr tier 7 license
Protect Mgr tier 1 license (#8268): This feature provides a license allowing use of the Protection Manager on one node of an N series tier 1 machine. One of this feature must be ordered for each node requiring a tier 1 Protection Manager license.
Protect Mgr tier 2 license (#8269): This feature provides a license allowing use of the Protection Manager on one node of an N series tier 2 machine. One of this feature must be ordered for each node requiring a tier 2 Protection Manager license.
Protect Mgr tier 3 license (#8270): This feature provides a license allowing use of the Protection Manager on one node of an N series tier 3 machine. One of this feature must be ordered for each node requiring a tier 3 Protection Manager license.
Protect Mgr tier 4 license (#8271): This feature provides a license allowing use of the Protection Manager on one node of an N series tier 4 machine. One of this feature must be ordered for each node requiring a tier 4 Protection Manager license.
Protect Mgr tier 5 license (#8272): This feature provides a license allowing use of the Protection Manager on one node of an N series tier 5 machine. One of this feature must be ordered for each node requiring a tier 5 Protection Manager license.
Protect Mgr tier 6 license (#8273): This feature provides a license allowing use of the Protection Manager on one node of an N series tier 6 machine. One of this feature must be ordered for each node requiring a tier 6 Protection Manager license.
Protect Mgr tier 7 license (#8274): This feature provides a license allowing use of the Protection Manager on one node of an N series tier 7 machine. One of this feature must be ordered for each node requiring a tier 7 Protection Manager license.
Power (line) cords
These features provide the necessary power (line) cords to supply external power to these N series machines. On initial orders, one power cord feature must be specified, either the PDU power cord for IEC 320, sheet C13 outlets, or one based on the country or region in which the system will be installed. The maximum quantity that may be ordered on the initial order is one.
Replacement power cords may be ordered for installed machines (MES order). The total quantity of these features (both the feature selected on the initial order, and one other feature selected on the first MES order) may not exceed 99. Only one power cord feature may be ordered in addition to the original.
Feature Description 9000 PDU Pwr Cord, 42U Rack 9001 Power Cord, Cont. Europe 9002 Power Cord, UK 9003 Power Cord, Japan 9004 Power Cord, North America 9005 Power Cord, Australia/N.Z. 9006 Power Cord, Switzerland 9007 Power Cord, Argentina 9008 Power Cord, China 9009 Power Cord, Denmark 9010 Power Cord, India/S. Africa 9011 Power Cord, Israel 9012 Power Cord, Italy 9013 Power Cord, N. America 250V 9014 Power Cord, Brazil 9015 Power Cord, Taiwan 9016 Power Cord, Taiwan 250V
Miscellaneous hardware features
Rack installation
Either feature number 9201 or 9202, but not both, must be included in the order for N3600 Model A10 or A20.
Plant install in 2101 rack (#9201): This feature specifies that the N3600 will be installed in an IBM System Storage 2101 Model N00 System Rack, by IBM manufacturing, prior to shipment. When selecting this feature, a 2101 Model N00 rack order must be tied to the N3600 order using the multisystem order function.
Field install rack mount kit (#9202): This feature specifies that the N3600 is to be installed in the field in a customer-provided rack. Rack mounting hardware is included.
MES Order Indicator (#9555): This feature indicates a field order for disk drives and will be automatically added by e-config during the first occurrence of a field order for disk drives. It is for administrative purposes only.
IGF Transaction Indicator (#9556): This specify feature is used to designate that a new N3600 Model A10 or Model A20 is involved in an IBM Global Financing transaction (lease or financing). It is for administrative purposes only.
For a new N3600 order that includes #76xx or #6xxx licensed function features (excluding feature #6000 or #6050), the IGF Transaction Indicator feature must be ordered as a Record Purposes Only (RPO) MES to the N3600. This feature is field-install only and cannot be included on the initial N3600 order.
This feature should not be used for any other #7600 or #6xxx licensed function transactions. It is not required when adding additional #76xx or #6xxx licensed functions to an installed N3600.
Configuration specify features
Features #9557, #9558, and #9559 must be specified to verify that the number of Fibre Channel ports are sufficient.
For a Model A10, the maximum number of feature #9557 that may be specified is two and the total number of feature #9558 and #9559 may not exceed one.
For a Model A20, the maximum number of feature #9557 that may be specified is four and the total number of feature #9558 and #9559 may not exceed one.
Num. of FC Target Ports (#9557): This no-charge feature specifies the number of onboard Fibre Channel ports that are to be configured as FCP target ports. FCP target ports are used for FC attachment of the N3600 to application servers (containing FC HBAs) or to FC storage area networks.
This feature is only relevant if you intend to use the Fibre Channel Protocol feature on the N3600. For a Model A10, valid choices are 0 and 2. For a Model A20, valid choices are 0, 2, and 4.
Num. of FC Storage Loops (#9558): This no-charge feature specifies, on the initial order of an N3600 storage controller, the number of dual-path FC storage loops that are to be configured for the attachment of EXN2000 and EXN4000 storage expansion units.
Num. of SATA Storage Loops (#9559):
This no-charge feature specifies, on the initial order of an N3600 storage controller, the
number of dual-path FC storage loops that are to be configured for the attachment of EXN1000 SATA
storage expansion units.
Back to top
|
|
| Publications |
|
The following publications are shipped with the product.
Order
Title number
Shipped in hardcopy:
IBM System Storage N3600 GC27-2089
Installation and Setup
Instructions
IBM System Storage N Series GC26-7986
Statement of Limited Warranty
(in 9 Languages)
Shipped on CD-ROM:
IBM System Storage N Series GC26-7987
Statement of Limited Warranty
(in 29 Languages)
IBM System Storage N3300 and GC27-2087
N3600 Hardware and Service
Guide
IBM System Storage EXN1000 GC26-7802
Storage Expansion Unit Hardware
and Service Guide
IBM System Storage EXN4000 GC27-2080
Storage Expansion Unit Hardware
and Service Guide
IBM System Storage N series GC27-2088
Platform Monitoring Guide
IBM Systems Safety Notices G229-9054
On the Web, all above, and:
IBM System Storage N series GA32-0543
Introduction and Planning Guide
All of the above publications are available on the N series support Web site
Publications are only available for download for existing IBM N series customers who have registered their N series products on the N series support site.
All N series publications are available on the N series support Web site
Publications are only available for download for existing IBM N series
customers who have registered their N series products on the N series
support site.
Back to top
|
|
| Services |
|
Global Technology Services
IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.
These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.
For details on available services, contact your IBM representative or visit
For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit
For details on education offerings related to specific products, visit
Select your country, and then select the product as the category.
Back to top
|
|
| Technical information |
|
Specified operating environment
Physical specifications
-
IBM System Storage N3600
- Width: 446 mm (17.6 in)
- Depth: 582 mm (23 in)
- Height: 175 mm (6.89 in)
- Weight: 32.6 kg (71.9 lb) — Model A10
- Weight: 35.3 kg (77.8 lb) — Model A20
- Weight: Add 0.8 kg (1.8 lb) for each SAS drive
-
IBM 2101-N00 rack with IBM System Storage N3600 installed
- Width: 644 mm (25.4 in)
- Depth: 1147 mm (45.2 in)
- Height: 1804 mm (71.0 in)
- Weight: 276.6 kg (606.9 lb) — Model A10
- Weight: 279.3 kg (612.8 lb) — Model A20
- Weight: Add 0.8 kg (1.8 lb) for each SAS drive
- Weight: Add 35.0 kg (77.0 lb) for each EXN1000 (14 HDD)
- Weight: Add 35.8 kg (78.8 lb) for each EXN2000 (14 HDD)
- Weight: Add 30.0 kg (66.2 lb) for each EXN4000 (14 HDD)
To assure installability and serviceability in non-IBM industry standard racks, review the installation planning information for any product specific installation requirements.
Operating environment
-
Temperature:
- Maximum range: 10° to 40°C (50° to 104°F)
- Recommended: 20° to 25°C (68° to 77°F)
- Non-operating: -40° to 60°C (-40° to 140°F)
-
Relative humidity:
- Recommended operating range: 20% to 80%
- Maximum wet bulb: 28°C
-
Maximum altitude: 3000 m (10,000 ft.)
Note: Operating at extremes of environment may increase failure probability.
- Wet bulb (caloric value): 853 Btu/hr
- Maximum electrical power: 100-240 V ac, 12-5 A per node, 47-63 Hz
- Nominal electrical power: 100 to 120 V ac, 6 A; 200 to 240 V ac, 3 A 50-60 Hz
-
Noise level:
- 49 dBa @ 1 m @ 23°C
- 6.7 bels @ 1 m @ 23°C
Hardware requirements
Licensed machine code (LMC)
The N3600 requires LMC level 7.2.2L1, or later. Some N3600 features and functions may not be available or supported in all environments. Current information on supported environments, prerequisites, and minimum operating systems levels is available at
Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance.
Licensed functions
The following licensed function is required on the N3600:
- Data ONTAP (feature number 7001 or 7101)
- CFO (feature number 7105 — Model A20 only)
Licensed functions require the selection of N3600 Model A10 or A20 features and the acquisition of the corresponding IBM 2870 Model 621 or 622 function authorization features.
Limitations
- The N3600 is supported only in rack installations.
- This product is functional with the System i™ and OpenPower® platforms. However, on the System i, support is available only on Linux on Power and AIX partitions, not i5/OS™.
- Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance.
Planning information
Customer responsibilities: Following good safety practice, IBM recommends that three or more persons install this product.
Physical configuration and installation planning for the 2869 is a customer responsibility. Information about physical configuration and installation requirements, including equipment, site, and power requirements, can be found in the IBM System Storage N3600 Installation and Setup Instructions (GC27-2089) .
A customer-supplied Ethernet cable is required to connect the machine to a server or Ethernet network.
You are responsible for downloading or obtaining from IBM, and installing designated machine code (microcode, basic input/output system code (called BIOS), utility programs, device drivers, and diagnostics delivered with an IBM machine) and other software updates in a timely manner from an IBM Internet Web site or from other electronic media, and following the instructions that IBM provides. You may request IBM to install machine code changes; however, you may be charged for that service.
Cable orders: No cables required.
Installability: Estimated time to unpack an IBM System Storage N3600, install it in the rack, and perform a simple discovery and configuration is two hours.
Security, auditability, and control
This product uses the security and auditability features of host hardware, host software, and/or application software to which it is attached.
The customer is responsible for evaluation, selection, and implementation of security features,
administrative procedures, and appropriate controls in application systems and communications
facilities.
Back to top
|
|
| Terms and conditions |
|
Volume orders: Contact your IBM representative.
IBM Global Financing: Yes
Warranty period: Three years
Warranty service: If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone, or electronically via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered Customer Replaceable Units (CRUs) will be provided as part of the machine's standard warranty service.
Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country- and location-specific information. This product is covered by the following types of service.
CRU service and on-site for other selected parts
CRU service: IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU.
Tier 1 CRU: Installation of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.
Tier 2 CRU: You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge.
Based upon availability, CRUs will be shipped for next-business-day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required 1) return instructions and a container are shipped with the replacement CRU and 2) you may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement.
The following parts have been designated as Tier 1 CRU parts:
- AC power cord
- AC power supply
- Battery
- Disk drive
- Fan
- Operator panel
On-site Service: IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.
- 9 hours per day, Monday through Friday, excluding holidays, next-business-day response
Calls must be received by 5 p.m. local time in order to qualify for next-business-day service.
Warranty service upgrades and maintenance service options
Warranty service upgrades
During the warranty period, warranty service upgrades provide an enhanced level of On-site Service for an additional charge. A warranty service upgrade must be purchased during the warranty period and is for a fixed term (duration). It is not refundable or transferable and may not be prorated. If required, IBM will provide the warranty service upgrade enhanced level of On-site Service acquired by the customer. Service levels are response time objectives and are not guaranteed.
IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability.
On-site Service: IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose. The following service selections are available as warranty upgrades for your machine:
- 9 hours per day, Monday through Friday, excluding holidays, 4-hour average, same-business-day response
- 24 hours per day, 7 days a week, 4-hour average response
- 24 hours per day, 7 days a week, 2-hour average response
CRUs may be provided as part of the machine's standard warranty CRU service except that you may install a CRU yourself or request IBM installation, at no additional charge, under one of the On-site Service levels specified above. For additional information on the CRU service, see warranty information.
Maintenance Services
If required, IBM provides repair or exchange service depending on the types of maintenance service specified for the machine. IBM will attempt to resolve your problem over the telephone or electronically, via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. Service levels are response time objectives and are not guaranteed. The specified level of maintenance service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country- and location-specific information. The following service selections are available as maintenance options for your machine type.
On-site Service: IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.
- 9 hours per day, Monday through Friday, excluding holidays, next-business-day response
- 9 hours per day, Monday through Friday, excluding holidays, 4-hour average response
- 24 hours per day, 7 days a week, 4-hour average response
- 24 hours per day, 7 days a week, 2-hour average response
CRU service: If your problem can be resolved with a CRU (for example, keyboard, mouse, speaker, memory, or hard disk drive), and depending upon the maintenance service offerings in your geography, IBM will ship the CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request.
Based upon availability, CRUs will be shipped for next-business-day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required (1) return instructions and a container are shipped with the replacement CRU and (2) you may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement.
CRUs may be provided as part of the machine's standard maintenance service except that you may install a CRU yourself or request IBM installation, at no additional charge, under any of the On-site Service levels specified above.
Usage plan machine: No
IBM hourly service rate classification: One. When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order.
Field-installable features: Yes
Model conversions: Yes
Machine installation: Customer setup. Customers are responsible for installation according to the instructions IBM provides with the machine.
Graduated program license charges apply: No
LMC: This product contains, or is provided together with, code which is licensed to the user, not sold. That code is copyrighted and may be the property of IBM, its suppliers or other third parties. You are authorized to use the code to the extent set forth in the applicable license agreements provided with the product. You may also obtain a copy of applicable license agreement by contacting your IBM representative.
Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance.
Machines using machine code: 2862-A10, 2862-A20
IBM may release changes to the machine code. IBM plans to make the machine code changes available for download from the IBM System Storage technical support Web site
If the machine does not function as warranted and your problem can be resolved through your application of downloadable machine code, you are responsible for downloading and installing these designated machine code changes as IBM specifies. If you would prefer, you may request IBM to install downloadable machine code changes; however, you may be charged for that service.
Educational allowance
A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance.
The educational allowance is 15% for the products in this announcement.
Back to top
|
|
| Prices |
|
The prices provided in this announcement are suggested retail prices for the U.S. only and are provided for your information only. Dealer prices may vary, and prices may also vary by country. Prices are subject to change without notice. For additional information and current prices, contact your local IBM representative.
Machine Feat. Purch.
Description type model number price
N3600 Model A10 2862 A10 $11,555
N3600 Model A20 2862 A20 15,145
2-Port Fiber GbE NIC 2862 A10, A20 1012 1,800
2-Port Cu GbE NIC 2862 A10, A20 1013 600
2-port 4-Gbps FC HBA - Disk 2862 A10, A20 1014 2,300
2-port 4-Gbps FC HBA - Tape 2862 A10, A20 1015 2,350
4-Gbps SFP GBIC 2862 A10, A20 2011 180
144 GB, 15K RPM SAS HDD 2862 A10, A20 4014 1,872
300 GB, 15K RPM SAS HDD 2862 A10, A20 4015 3,047
HDD Blank Panel 2862 A10, A20 4099 0
Licensed Function Indicators
Data ONTAP 2862 A10 7001 0 CIFS 2862 A10 7002 0 HTTP 2862 A10 7003 0 NFS 2862 A10 7004 0 FlexClone 2862 A10 7011 0 MultiStore 2862 A10 7020 0 NearStore 2862 A10 7022 0 iSCSI Protocol 2862 A10 7025 0 SnapMirror 2862 A10 7031 0 SnapRestore 2862 A10 7035 0 SnapVault Primary 2862 A10 7036 0 SnapVault Secondary 2862 A10 7037 0 SnapValidator 2862 A10 7042 0 Fibre Channel Protocol 2862 A10 7043 0 Disk Sanitization 2862 A10 7044 0 SnapManager/Exchange - Filer 2862 A10 7045 0 SnapManager/SQL - Filer 2862 A10 7046 0 Adv. Single Instance Storage 2862 A10 7047 0 Data ONTAP 2862 A20 7101 0 CIFS 2862 A20 7102 0 HTTP 2862 A20 7103 0 NFS 2862 A20 7104 0 CFO 2862 A20 7105 0 FlexClone 2862 A20 7111 0 MultiStore 2862 A20 7120 0 NearStore 2862 A20 7122 0 iSCSI Protocol 2862 A20 7125 0 SnapMirror 2862 A20 7131 0 SnapMover 2862 A20 7134 0 SnapRestore 2862 A20 7135 0 SnapVault Primary 2862 A20 7136 0 SnapVault Secondary 2862 A20 7137 0 SnapValidator 2862 A20 7142 0 Fibre Channel Protocol 2862 A20 7143 0 Disk Sanitization 2862 A20 7144 0 SnapManager/Exchange - Filer 2862 A20 7145 0 SnapManager/SQL - Filer 2862 A20 7146 0 Adv. Single Instance Storage 2862 A20 7147 0
Host software
SnapDrive - AIX 1-2 Procs 2862 A10, A20 8000 0 SnapDrive - AIX 3-4 Procs 2862 A10, A20 8001 0 SnapDrive - AIX 5-8 Procs 2862 A10, A20 8002 0 SnapDrive - AIX 9+ Procs 2862 A10, A20 8003 0 SnapDrive - HPUX 1-2 Procs 2862 A10, A20 8004 0 SnapDrive - HPUX 3-4 Procs 2862 A10, A20 8005 0 SnapDrive - HPUX 5-8 Procs 2862 A10, A20 8006 0 SnapDrive - HPUX 9+ Procs 2862 A10, A20 8007 0 SnapDrive - Solaris 1-2 Proc 2862 A10, A20 8008 0 SnapDrive - Solaris 3-4 Proc 2862 A10, A20 8009 0 SnapDrive - Solaris 5-8 Proc 2862 A10, A20 8010 0 SnapDrive - Solaris 9+ Procs 2862 A10, A20 8011 0 SnapDrive - Linux 1-2 Procs 2862 A10, A20 8020 0 SnapDrive - Linux 3-4 Procs 2862 A10, A20 8021 0 SnapDrive - Linux 5-8 Procs 2862 A10, A20 8022 0 SnapDrive - Linux 9+ Procs 2862 A10, A20 8023 0 SnapDrive for UNIX Media Kit 2862 A10, A20 8040 0 SnapDrive for Windows 2862 A10, A20 8050 0 SnapDrive for Win Media Kit 2862 A10, A20 8051 0 ONTAP DSM for Windows MPIO 2862 A10, A20 8052 0 ONTAP DSM Win MPIO Media Kit 2862 A10, A20 8053 0 FCP Host Attach Kit - Win 2862 A10, A20 8100 0 Base FCP Host Atch Kit - AIX 2862 A10, A20 8110 0 AIX Multipathing - 1-2 Procs 2862 A10, A20 8111 0 AIX Multipathing - 3-4 Procs 2862 A10, A20 8112 0 AIX Multipathing - 5-8 Procs 2862 A10, A20 8113 0 AIX Multipathing - 9+ Procs 2862 A10, A20 8114 0 AIX Media Kit for Multipath 2862 A10, A20 8119 0 FCP Host Attach Kit - Linux 2862 A10, A20 8120 0 FCP Host Attach Kit - HPUX 2862 A10, A20 8121 0 FCP Host Atch Kit - Solaris 2862 A10, A20 8122 0 FCP Host Utilities - VMWare 2862 A10, A20 8123 0 SnapManager/Exchange - Host 2862 A10, A20 8131 0 SnapManager/Exch - Media Kit 2862 A10, A20 8132 0 SnapManager for SQL - Host 2862 A10, A20 8141 0 SnapManager/SQL - Media Kit 2862 A10, A20 8142 0 SnapManager for Oracle 2862 A10, A20 8143 0 SnapManager/Oracle-Media Kit 2862 A10, A20 8144 0 SnapManager for SAP 2862 A10, A20 8145 0 SnapManager/SAP-Media Kit 2862 A10, A20 8146 0 Single Mbox Recovery 100 pk 2862 A10, A20 8150 0 Single Mbox Recovery 500 pk 2862 A10, A20 8151 0 Single Mbox Recovery 1000 pk 2862 A10, A20 8152 0 Single Mbox Recovery 2500 pk 2862 A10, A20 8153 0 Single Mbox Recovery 5K pk 2862 A10, A20 8154 0 Single Mbox Recovery 10K pk 2862 A10, A20 8155 0 Single Mbox Recovery 50K pk 2862 A10, A20 8156 0 Single Mbox Recovery Med Kt 2862 A10, A20 8157 0 SMBR CA-ARCSERVE Extract Wiz 2862 A10, A20 8158 0 SMBR Tivoli Tape Extract Wiz 2862 A10, A20 8159 0 SMBR Legato Tape Extract Wiz 2862 A10, A20 8160 0 SMBR NetBackup Extract Wiz 2862 A10, A20 8161 0 SMBR PST Tape Extract Wiz 2862 A10, A20 8162 0 SMBR HP Extract Wiz 2862 A10, A20 8163 0 SMBR Commvault Galaxy Ex Wiz 2862 A10, A20 8164 0 SMBR UltraBac Extract Wizard 2862 A10, A20 8165 0 SMBR Agent for Adv Search 2862 A10, A20 8166 0 SMBR Content Analysis Wizard 2862 A10, A20 8167 0 Op Mgr Store Resource Mgmt 2862 A10, A20 8257 0 Operations Mgr Media Kit 2862 A10, A20 8258 0 Ops Mgr Core tier 1 license 2862 A10, A20 8261 0 Ops Mgr Core tier 2 license 2862 A10, A20 8262 0 Ops Mgr Core tier 3 license 2862 A10, A20 8263 0 Ops Mgr Core tier 4 license 2862 A10, A20 8264 0 Ops Mgr Core tier 5 license 2862 A10, A20 8265 0 Ops Mgr Core tier 6 license 2862 A10, A20 8266 0 Ops Mgr Core tier 7 license 2862 A10, A20 8267 0 Protect Mgr tier 1 license 2862 A10, A20 8268 0 Protect Mgr tier 2 license 2862 A10, A20 8269 0 Protect Mgr tier 3 license 2862 A10, A20 8270 0 Protect Mgr tier 4 license 2862 A10, A20 8271 0 Protect Mgr tier 5 license 2862 A10, A20 8272 0 Protect Mgr tier 6 license 2862 A10, A20 8273 0 Protect Mgr tier 7 license 2862 A10, A20 8274 0
Power Cords
PDU Pwr Cord, 42U Rack 2862 A10, A20 9000 0 Power Cord, Cont. Europe 2862 A10, A20 9001 0 Power Cord, United Kingdom 2862 A10, A20 9002 0 Power Cord, Japan 2862 A10, A20 9003 0 Power Cord, North America 2862 A10, A20 9004 0 Power Cord, Australia/N.Z. 2862 A10, A20 9005 0 Power Cord, Switzerland 2862 A10, A20 9006 0 Power Cord, Argentina 2862 A10, A20 9007 0 Power Cord, China 2862 A10, A20 9008 0 Power Cord, Denmark 2862 A10, A20 9009 0 Power Cord, India/S. Africa 2862 A10, A20 9010 0 Power Cord, Israel 2862 A10, A20 9011 0 Power Cord, Italy 2862 A10, A20 9012 0 Power Cord, N. America 250V 2862 A10, A20 9013 0 Power Cord, Brazil 2862 A10, A20 9014 0 Power Cord, Taiwan 2862 A10, A20 9015 0 Power Cord, Taiwan 250V 2862 A10, A20 9016 0
Installation
Plant install in 2101 rack 2862 A10, A20 9201 160 Field install rack mount kit 2862 A10, A20 9202 160
MES ordering
MES Order Indicator 2862 A10, A20 9555 0
Global Finance transaction
IGF Transaction Indicator 2862 A10, A20 9556 NC
Port/loop counts
Num. of FC Target Ports 2862 A10, A20 9557 NC Num. of FC Storage Loops 2862 A10, A20 9558 NC Num. of SATA Storage Loops 2862 A10, A20 9559 NC Dual-path FC Cabling 2862 A20 9560 NC
Plant/
Field MES Cabl CSU
Mach/Mod/Feat install removal req. (1)
2-Port Fiber GbE NIC 2862/A10/1012 Both N N Y
2-Port Cu GbE NIC 2862/A10/1013 Both N N Y
2-port 4-Gbps FC HBA - Disk 2862/A10/1014 Both N N Y
2-port 4-Gbps FC HBA - Tape 2862/A10/1015 Both N N Y
4-Gbps SFP GBIC 2862/A10/2011 Both N N Y
144 GB, 15K RPM SAS HDD 2862/A10/4014 Both N N Y
300 GB, 15K RPM SAS HDD 2862/A10/4015 Both N N Y
HDD Blank Panel 2862/A10/4099 Both N N Y
Data ONTAP 2862/A10/7001 Both N(2) N Y
CIFS 2862/A10/7002 Both N(2) N Y
HTTP 2862/A10/7003 Both N(2) N Y
NFS 2862/A10/7004 Both N(2) N Y
FlexClone 2862/A10/7011 Both N(2) N Y
MultiStore 2862/A10/7020 Both N(2) N Y
NearStore 2862/A10/7022 Both N(2) N Y
iSCSI Protocol 2862/A10/7025 Both N(2) N Y
SnapMirror 2862/A10/7031 Both N(2) N Y
SnapRestore 2862/A10/7035 Both N(2) N Y
SnapVault Primary 2862/A10/7036 Both N(2) N Y
SnapVault Secondary 2862/A10/7037 Both N(2) N Y
SnapValidator 2862/A10/7042 Both N(2) N Y
Fibre Channel Protocol 2862/A10/7043 Both N(2) N Y
Disk Sanitization 2862/A10/7044 Both N(2) N Y
SnapManager/Exchange - Filer 2862/A10/7045 Both N(2) N Y
SnapManager/SQL - Filer 2862/A10/7046 Both N(2) N Y
Adv. Single Instance Storage 2862/A10/7047 Both N(2) N Y
SnapDrive - AIX 1-2 Procs 2862/A10/8000 Both N N Y
SnapDrive - AIX 3-4 Procs 2862/A10/8001 Both N N Y
SnapDrive - AIX 5-8 Procs 2862/A10/8002 Both N N Y
SnapDrive - AIX 9+ Procs 2862/A10/8003 Both N N Y
SnapDrive - HPUX 1-2 Procs 2862/A10/8004 Both N N Y
SnapDrive - HPUX 3-4 Procs 2862/A10/8005 Both N N Y
SnapDrive - HPUX 5-8 Procs 2862/A10/8006 Both N N Y
SnapDrive - HPUX 9+ Procs 2862/A10/8007 Both N N Y
SnapDrive - Solaris 1-2 Proc 2862/A10/8008 Both N N Y
SnapDrive - Solaris 3-4 Proc 2862/A10/8009 Both N N Y
SnapDrive - Solaris 5-8 Proc 2862/A10/8010 Both N N Y
SnapDrive - Solaris 9+ Procs 2862/A10/8011 Both N N Y
SnapDrive - Linux 1-2 Procs 2862/A10/8020 Both N N Y
SnapDrive - Linux 3-4 Procs 2862/A10/8021 Both N N Y
SnapDrive - Linux 5-8 Procs 2862/A10/8022 Both N N Y
SnapDrive - Linux 9+ Procs 2862/A10/8023 Both N N Y
SnapDrive for UNIX Media Kit 2862/A10/8040 Both N N Y
SnapDrive for Windows 2862/A10/8050 Both N N Y
SnapDrive for Win Media Kit 2862/A10/8051 Both N N Y
ONTAP DSM for Windows MPIO 2862/A10/8052 Both N N Y
ONTAP DSM Win MPIO Media Kit 2862/A10/8053 Both N N Y
FCP Host Attach Kit - Win 2862/A10/8100 Both N N Y
Base FCP Host Atch Kit - AIX 2862/A10/8110 Both N N Y
AIX Multipathing - 1-2 Procs 2862/A10/8111 Both N N Y
AIX Multipathing - 3-4 Procs 2862/A10/8112 Both N N Y
AIX Multipathing - 5-8 Procs 2862/A10/8113 Both N N Y
AIX Multipathing - 9+ Procs 2862/A10/8114 Both N N Y
AIX Media Kit for Multipath 2862/A10/8119 Both N N Y
FCP Host Attach Kit - Linux 2862/A10/8120 Both N N Y
FCP Host Attach Kit - HPUX 2862/A10/8121 Both N N Y
FCP Host Atch Kit - Solaris 2862/A10/8122 Both N N Y
FCP Host Utilities - VMWare 2862/A10/8123 Both N N Y
SnapManager/Exchange - Host 2862/A10/8131 Both N N Y
SnapManager/Exch - Media Kit 2862/A10/8132 Both N N Y
SnapManager for SQL - Host 2862/A10/8141 Both N N Y
SnapManager/SQL - Media Kit 2862/A10/8142 Both N N Y
SnapManager for Oracle 2862/A10/8143 Both N N Y
SnapManager/Oracle-Media Kit 2862/A10/8144 Both N N Y
SnapManager for SAP 2862/A10/8145 Both N N Y
SnapManager/SAP-Media Kit 2862/A10/8146 Both N N Y
Single Mbox Recovery 100 pk 2862/A10/8150 Both N N Y
Single Mbox Recovery 500 pk 2862/A10/8151 Both N N Y
Single Mbox Recovery 1000 pk 2862/A10/8152 Both N N Y
Single Mbox Recovery 2500 pk 2862/A10/8153 Both N N Y
Single Mbox Recovery 5K pk 2862/A10/8154 Both N N Y
Single Mbox Recovery 10K pk 2862/A10/8155 Both N N Y
Single Mbox Recovery 50K pk 2862/A10/8156 Both N N Y
Single Mbox Recovery Med Kt 2862/A10/8157 Both N N Y
SMBR CA-ARCSERVE Extract Wiz 2862/A10/8158 Both N N Y
SMBR Tivoli Tape Extract Wiz 2862/A10/8159 Both N N Y
SMBR Legato Tape Extract Wiz 2862/A10/8160 Both N N Y
SMBR NetBackup Extract Wiz 2862/A10/8161 Both N N Y
SMBR PST Tape Extract Wiz 2862/A10/8162 Both N N Y
SMBR HP Extract Wiz 2862/A10/8163 Both N N Y
SMBR Commvault Galaxy Ex Wiz 2862/A10/8164 Both N N Y
SMBR UltraBac Extract Wizard 2862/A10/8165 Both N N Y
SMBR Agent for Adv Search 2862/A10/8166 Both N N Y
SMBR Content Analysis Wizard 2862/A10/8167 Both N N Y
Op Mgr Store Resource Mgmt 2862/A10/8257 Both N N Y
Operations Mgr Media Kit 2862/A10/8258 Both N N Y
Ops Mgr Core tier 1 license 2862/A10/8261 Both N N Y
Ops Mgr Core tier 2 license 2862/A10/8262 Both N N Y
Ops Mgr Core tier 3 license 2862/A10/8263 Both N N Y
Ops Mgr Core tier 4 license 2862/A10/8264 Both N N Y
Ops Mgr Core tier 5 license 2862/A10/8265 Both N N Y
Ops Mgr Core tier 6 license 2862/A10/8266 Both N N Y
Ops Mgr Core tier 7 license 2862/A10/8267 Both N N Y
Protect Mgr tier 1 license 2862/A10/8268 Both N N Y
Protect Mgr tier 2 license 2862/A10/8269 Both N N Y
Protect Mgr tier 3 license 2862/A10/8270 Both N N Y
Protect Mgr tier 4 license 2862/A10/8271 Both N N Y
Protect Mgr tier 5 license 2862/A10/8272 Both N N Y
Protect Mgr tier 6 license 2862/A10/8273 Both N N Y
Protect Mgr tier 7 license 2862/A10/8274 Both N N Y
PDU Pwr Cord, 42U Rack 2862/A10/9000 Both N N Y
Power Cord, Cont. Europe 2862/A10/9001 Both N N Y
Power Cord, UK 2862/A10/9002 Both N N Y
Power Cord, Japan 2862/A10/9003 Both N N Y
Power Cord, North America 2862/A10/9004 Both N N Y
Power Cord, Australia/N.Z. 2862/A10/9005 Both N N Y
Power Cord, Switzerland 2862/A10/9006 Both N N Y
Power Cord, Argentina 2862/A10/9007 Both N N Y
Power Cord, China 2862/A10/9008 Both N N Y
Power Cord, Denmark 2862/A10/9009 Both N N Y
Power Cord, India/S. Africa 2862/A10/9010 Both N N Y
Power Cord, Israel 2862/A10/9011 Both N N Y
Power Cord, Italy 2862/A10/9012 Both N N Y
Power Cord, N. America 250V 2862/A10/9013 Both N N Y
Power Cord, Brazil 2862/A10/9014 Both N N Y
Power Cord, Taiwan 2862/A10/9015 Both N N Y
Power Cord, Taiwan 250V 2862/A10/9016 Both N N Y
Plant install in 2101 rack 2862/A10/9201 Plant N N Y
Field install rack mount kit 2862/A10/9202 Plant N N Y
MES Order Indicator 2862/A10/9555 Field N N Y
IGF Transaction Indicator 2862/A10/9556 Field N N Y
Num. of FC Target Ports 2862/A10/9557 Plant N N Y
Num. of FC Storage Loops 2862/A10/9558 Plant N N Y
Num. of SATA Storage Loops 2862/A10/9559 Plant N N Y
2-Port Fiber GbE NIC 2862/A20/1012 Both N N Y
2-Port Cu GbE NIC 2862/A20/1013 Both N N Y
2-port 4-Gbps FC HBA - Disk 2862/A20/1014 Both N N Y
2-port 4-Gbps FC HBA - Tape 2862/A20/1015 Both N N Y
4-Gbps SFP GBIC 2862/A20/2011 Both N N Y
144 GB, 15K RPM SAS HDD 2862/A20/4014 Both N N Y
300 GB, 15K RPM SAS HDD 2862/A20/4015 Both N N Y
HDD Blank Panel 2862/A20/4099 Both N N Y
Data ONTAP 2862/A20/7101 Both(3) N N Y
CIFS 2862/A20/7102 Both N N Y
HTTP 2862/A20/7103 Both N N Y
NFS 2862/A20/7104 Both N N Y
CFO 2862/A20/7105 Both(3) N N Y
FlexClone 2862/A20/7111 Both N N Y
MultiStore 2862/A20/7120 Both N N Y
NearStore 2862/A20/7122 Both N N Y
iSCSI Protocol 2862/A20/7125 Both N N Y
SnapMirror 2862/A20/7131 Both N N Y
SnapMover 2862/A20/7134 Both N N Y
SnapRestore 2862/A20/7135 Both N N Y
SnapVault Primary 2862/A20/7136 Both N N Y
SnapVault Secondary 2862/A20/7137 Both N N Y
SnapValidator 2862/A20/7142 Both N N Y
Fibre Channel Protocol 2862/A20/7143 Both N N Y
Disk Sanitization 2862/A20/7144 Both N N Y
SnapManager/Exchange - Filer 2862/A20/7145 Both N N Y
SnapManager/SQL - Filer 2862/A20/7146 Both N N Y
Adv. Single Instance Storage 2862/A20/7147 Both N N Y
SnapDrive - AIX 1-2 Procs 2862/A20/8000 Both N N Y
SnapDrive - AIX 3-4 Procs 2862/A20/8001 Both N N Y
SnapDrive - AIX 5-8 Procs 2862/A20/8002 Both N N Y
SnapDrive - AIX 9+ Procs 2862/A20/8003 Both N N Y
SnapDrive - HPUX 1-2 Procs 2862/A20/8004 Both N N Y
SnapDrive - HPUX 3-4 Procs 2862/A20/8005 Both N N Y
SnapDrive - HPUX 5-8 Procs 2862/A20/8006 Both N N Y
SnapDrive - HPUX 9+ Procs 2862/A20/8007 Both N N Y
SnapDrive - Solaris 1-2 Proc 2862/A20/8008 Both N N Y
SnapDrive - Solaris 3-4 Proc 2862/A20/8009 Both N N Y
SnapDrive - Solaris 5-8 Proc 2862/A20/8010 Both N N Y
SnapDrive - Solaris 9+ Procs 2862/A20/8011 Both N N Y
SnapDrive - Linux 1-2 Procs 2862/A20/8020 Both N N Y
SnapDrive - Linux 3-4 Procs 2862/A20/8021 Both N N Y
SnapDrive - Linux 5-8 Procs 2862/A20/8022 Both N N Y
SnapDrive - Linux 9+ Procs 2862/A20/8023 Both N N Y
SnapDrive for UNIX Media Kit 2862/A20/8040 Both N N Y
SnapDrive for Windows 2862/A20/8050 Both N N Y
SnapDrive for Win Media Kit 2862/A20/8051 Both N N Y
ONTAP DSM for Windows MPIO 2862/A20/8052 Both N N Y
ONTAP DSM Win MPIO Media Kit 2862/A20/8053 Both N N Y
FCP Host Attach Kit - Win 2862/A20/8100 Both N N Y
Base FCP Host Atch Kit - AIX 2862/A20/8110 Both N N Y
AIX Multipathing - 1-2 Procs 2862/A20/8111 Both N N Y
AIX Multipathing - 3-4 Procs 2862/A20/8112 Both N N Y
AIX Multipathing - 5-8 Procs 2862/A20/8113 Both N N Y
AIX Multipathing - 9+ Procs 2862/A20/8114 Both N N Y
AIX Media Kit for Multipath 2862/A20/8119 Both N N Y
FCP Host Attach Kit - Linux 2862/A20/8120 Both N N Y
FCP Host Attach Kit - HPUX 2862/A20/8121 Both N N Y
FCP Host Atch Kit - Solaris 2862/A20/8122 Both N N Y
FCP Host Utilities - VMWare 2862/A20/8123 Both N N Y
SnapManager/Exchange - Host 2862/A20/8131 Both N N Y
SnapManager/Exch - Media Kit 2862/A20/8132 Both N N Y
SnapManager for SQL - Host 2862/A20/8141 Both N N Y
SnapManager/SQL - Media Kit 2862/A20/8142 Both N N Y
SnapManager for Oracle 2862/A20/8143 Both N N Y
SnapManager/Oracle-Media Kit 2862/A20/8144 Both N N Y
SnapManager for SAP 2862/A20/8145 Both N N Y
SnapManager/SAP-Media Kit 2862/A20/8146 Both N N Y
Single Mbox Recovery 100 pk 2862/A20/8150 Both N N Y
Single Mbox Recovery 500 pk 2862/A20/8151 Both N N Y
Single Mbox Recovery 1000 pk 2862/A20/8152 Both N N Y
Single Mbox Recovery 2500 pk 2862/A20/8153 Both N N Y
Single Mbox Recovery 5K pk 2862/A20/8154 Both N N Y
Single Mbox Recovery 10K pk 2862/A20/8155 Both N N Y
Single Mbox Recovery 50K pk 2862/A20/8156 Both N N Y
Single Mbox Recovery Med Kt 2862/A20/8157 Both N N Y
SMBR CA-ARCSERVE Extract Wiz 2862/A20/8158 Both N N Y
SMBR Tivoli Tape Extract Wiz 2862/A20/8159 Both N N Y
SMBR Legato Tape Extract Wiz 2862/A20/8160 Both N N Y
SMBR NetBackup Extract Wiz 2862/A20/8161 Both N N Y
SMBR PST Tape Extract Wiz 2862/A20/8162 Both N N Y
SMBR HP Extract Wiz 2862/A20/8163 Both N N Y
SMBR Commvault Galaxy Ex Wiz 2862/A20/8164 Both N N Y
SMBR UltraBac Extract Wizard 2862/A20/8165 Both N N Y
SMBR Agent for Adv Search 2862/A20/8166 Both N N Y
SMBR Content Analysis Wizard 2862/A20/8167 Both N N Y
Op Mgr Store Resource Mgmt 2862/A20/8257 Both N N Y
Operations Mgr Media Kit 2862/A20/8258 Both N N Y
Ops Mgr Core tier 1 license 2862/A20/8261 Both N N Y
Ops Mgr Core tier 2 license 2862/A20/8262 Both N N Y
Ops Mgr Core tier 3 license 2862/A20/8263 Both N N Y
Ops Mgr Core tier 4 license 2862/A20/8264 Both N N Y
Ops Mgr Core tier 5 license 2862/A20/8265 Both N N Y
Ops Mgr Core tier 6 license 2862/A20/8266 Both N N Y
Ops Mgr Core tier 7 license 2862/A20/8267 Both N N Y
Protect Mgr tier 1 license 2862/A20/8268 Both N N Y
Protect Mgr tier 2 license 2862/A20/8269 Both N N Y
Protect Mgr tier 3 license 2862/A20/8270 Both N N Y
Protect Mgr tier 4 license 2862/A20/8271 Both N N Y
Protect Mgr tier 5 license 2862/A20/8272 Both N N Y
Protect Mgr tier 6 license 2862/A20/8273 Both N N Y
Protect Mgr tier 7 license 2862/A20/8274 Both N N Y
PDU Pwr Cord, 42U Rack 2862/A20/9000 Both N N Y
Power Cord, Cont. Europe 2862/A20/9001 Both N N Y
Power Cord, UK 2862/A20/9002 Both N N Y
Power Cord, Japan 2862/A20/9003 Both N N Y
Power Cord, North America 2862/A20/9004 Both N N Y
Power Cord, Australia/N.Z. 2862/A20/9005 Both N N Y
Power Cord, Switzerland 2862/A20/9006 Both N N Y
Power Cord, Argentina 2862/A20/9007 Both N N Y
Power Cord, China 2862/A20/9008 Both N N Y
Power Cord, Denmark 2862/A20/9009 Both N N Y
Power Cord, India/S. Africa 2862/A20/9010 Both N N Y
Power Cord, Israel 2862/A20/9011 Both N N Y
Power Cord, Italy 2862/A20/9012 Both N N Y
Power Cord, N. America 250V 2862/A20/9013 Both N N Y
Power Cord, Brazil 2862/A20/9014 Both N N Y
Power Cord, Taiwan 2862/A20/9015 Both N N Y
Power Cord, Taiwan 250V 2862/A20/9016 Both N N Y
Plant install in 2101 rack 2862/A20/9201 Plant N N Y
Field install rack mount kit 2862/A20/9202 Plant N N Y
MES Order Indicator 2862/A20/9555 Field N N Y
IGF Transaction Indicator 2862/A20/9556 Field N N Y
Num. of FC Target Ports 2862/A20/9557 Plant N N Y
Num. of FC Storage Loops 2862/A20/9558 Plant N N Y
Num. of SATA Storage Loops 2862/A20/9559 Plant N N Y
Dual-path FC Cabling 2862/A20/9560 Plant N N Y
(1) Customer setup.
(2) The feature can be removed only through a feature conversion
transaction.
(3) The feature is field install only during a model
conversion.
Alternative and maintenance service
ICA warranty upgrade
IWR
IBM
Machine on-site repair
type-model-feature (IOR, 24 x 7)
2862-A10 $3,900
2862-A20 4,550
ICA maintenance
IO8 IOR
IBM next day IBM 4-hr resp.
on-site repair on-site repair
Machine type-model (IOR, 9 x 5) (IOR, 24 x 7)
2862-A10 $ 206 $ 289
2862-A20 289 404
2862-A10-7001 0 0
2862-A10-7002 38 53
2862-A10-7003 17 24
2862-A10-7004 57 80
2862-A10-7011 70 97
2862-A10-7020 64 90
2862-A10-7022 8 11
2862-A10-7025 0 0
2862-A10-7031 98 137
2862-A10-7035 30 41
2862-A10-7036 33 46
2862-A10-7037 116 162
2862-A10-7042 10 14
2862-A10-7043 8 11
2862-A10-7044 0 0
2862-A10-7045 116 162
2862-A10-7046 116 162
2862-A10-7047 0 0
2862-A10-8000 8 11
2862-A10-8001 15 22
2862-A10-8002 26 36
2862-A10-8003 41 58
2862-A10-8004 8 11
2862-A10-8005 15 22
2862-A10-8006 26 36
2862-A10-8007 41 58
2862-A10-8008 8 11
2862-A10-8009 15 22
2862-A10-8010 26 36
2862-A10-8011 41 58
2862-A10-8020 8 11
2862-A10-8021 15 22
2862-A10-8022 26 36
2862-A10-8023 41 58
2862-A10-8040 0 0
2862-A10-8050 3 5
2862-A10-8051 0 0
2862-A10-8052 6 8
2862-A10-8053 0 0
2862-A10-8100 0 0
2862-A10-8110 0 0
2862-A10-8111 21 29
2862-A10-8112 26 36
2862-A10-8113 31 43
2862-A10-8114 52 72
2862-A10-8119 0 0
2862-A10-8120 0 0
2862-A10-8121 0 0
2862-A10-8122 0 0
2862-A10-8123 0 0
2862-A10-8131 39 54
2862-A10-8132 0 0
2862-A10-8141 39 54
2862-A10-8142 0 0
2862-A10-8143 13 18
2862-A10-8144 0 0
2862-A10-8145 16 23
2862-A10-8146 0 0
2862-A10-8150 10 14
2862-A10-8151 22 30
2862-A10-8152 34 48
2862-A10-8153 70 97
2862-A10-8154 113 158
2862-A10-8155 193 270
2862-A10-8156 943 1,320
2862-A10-8157 0 0
2862-A10-8158 3 4
2862-A10-8159 3 4
2862-A10-8160 3 4
2862-A10-8161 3 4
2862-A10-8162 5 7
2862-A10-8163 3 4
2862-A10-8164 3 4
2862-A10-8165 3 4
2862-A10-8166 3 4
2862-A10-8167 0 0
2862-A10-8257 52 72
2862-A10-8258 0 0
2862-A10-8261 0 0
2862-A10-8262 6 9
2862-A10-8263 9 12
2862-A10-8264 12 17
2862-A10-8265 13 19
2862-A10-8266 19 27
2862-A10-8267 21 29
2862-A10-8268 5 7
2862-A10-8269 15 22
2862-A10-8270 26 36
2862-A10-8271 31 43
2862-A10-8272 41 58
2862-A10-8273 52 72
2862-A10-8274 52 72
2862-A20-7101 0 0
2862-A20-7102 57 79
2862-A20-7103 26 36
2862-A20-7104 86 120
2862-A20-7105 9 13
2862-A20-7111 118 166
2862-A20-7120 97 135
2862-A20-7122 10 14
2862-A20-7125 0 0
2862-A20-7131 148 207
2862-A20-7134 0 0
2862-A20-7135 44 62
2862-A20-7136 49 69
2862-A20-7137 174 243
2862-A20-7142 16 22
2862-A20-7143 12 16
2862-A20-7144 0 0
2862-A20-7145 174 243
2862-A20-7146 174 243
2862-A20-7147 0 0
2862-A20-8000 8 11
2862-A20-8001 15 22
2862-A20-8002 26 36
2862-A20-8003 41 58
2862-A20-8004 8 11
2862-A20-8005 15 22
2862-A20-8006 26 36
2862-A20-8007 41 58
2862-A20-8008 8 11
2862-A20-8009 15 22
2862-A20-8010 26 36
2862-A20-8011 41 58
2862-A20-8020 8 11
2862-A20-8021 15 22
2862-A20-8022 26 36
2862-A20-8023 41 58
2862-A20-8040 0 0
2862-A20-8050 3 5
2862-A20-8051 0 0
2862-A20-8052 6 8
2862-A20-8053 0 0
2862-A20-8100 0 0
2862-A20-8110 0 0
2862-A20-8111 21 29
2862-A20-8112 26 36
2862-A20-8113 31 43
2862-A20-8114 52 72
2862-A20-8119 0 0
2862-A20-8120 0 0
2862-A20-8121 0 0
2862-A20-8122 0 0
2862-A20-8123 0 0
2862-A20-8131 39 54
2862-A20-8132 0 0
2862-A20-8141 39 54
2862-A20-8142 0 0
2862-A20-8143 13 18
2862-A20-8144 0 0
2862-A20-8145 16 23
2862-A20-8146 0 0
2862-A20-8150 10 14
2862-A20-8151 22 30
2862-A20-8152 34 48
2862-A20-8153 70 97
2862-A20-8154 113 158
2862-A20-8155 193 270
2862-A20-8156 943 1,320
2862-A20-8157 0 0
2862-A20-8158 3 4
2862-A20-8159 3 4
2862-A20-8160 3 4
2862-A20-8161 3 4
2862-A20-8162 5 7
2862-A20-8163 3 4
2862-A20-8164 3 4
2862-A20-8165 3 4
2862-A20-8166 3 4
2862-A20-8167 0 0
2862-A20-8257 52 72
2862-A20-8258 0 0
2862-A20-8261 0 0
2862-A20-8262 6 9
2862-A20-8263 9 12
2862-A20-8264 12 17
2862-A20-8265 13 19
2862-A20-8266 19 27
2862-A20-8267 21 29
2862-A20-8268 5 7
2862-A20-8269 15 22
2862-A20-8270 26 36
2862-A20-8271 31 43
2862-A20-8272 41 58
2862-A20-8273 52 72
2862-A20-8274 52 72
Annual minimum maintenance charges: For ServiceElect (ESA) maintenance service charges, contact IBM Global Services at 888-IBM-4343 (426-4343).
Model conversion purchase price
Machine type 2862 — model conversions
From To Returned Model conversion model model parts purchase price A10 A20 No $11,555
Feature conversion purchase price
Feature Returned Continuous Feature conversion from to parts maintenance purchase price 7001 7101 N Y $ 0 7002 7102 N Y 0 7003 7103 N Y 0 7004 7104 N Y 0 7011 7111 N Y 0 7020 7120 N Y 0 7022 7122 N Y 0 7025 7125 N Y 0 7031 7131 N Y 0 7035 7135 N Y 0 7036 7136 N Y 0 7037 7137 N Y 0 7042 7142 N Y 0 7043 7143 N Y 0 7044 7144 N Y 0 7045 7145 N Y 0 7046 7146 N Y 0 7047 7147 N Y 0
IBM Global Financing: IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Offerings include financing for IT acquisition, including hardware, software, and services, from both IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit
IBM Global Financing offerings are provided through IBM Credit LLC in the United States, and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. Rates are based on a customer's credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice.
Financing solutions from IBM Global Financing can help you stretch your budget and affordably acquire the new product. But beyond the initial acquisition, our end-to-end approach to IT management can also help keep your technologies current, reduce costs, minimize risk, and preserve your ability to make flexible equipment decisions throughout the entire technology life cycle. For more financing information, refer to
Back to top
|
|
| Order now |
|
To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner.
To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).
Phone: 800-IBM-CALL (426-2255)
Fax: 800-2IBM-FAX (242-6329)
Internet: callserv@ca.ibm.com
Mail: IBM Teleweb Customer Support
ibm.com Sales Execution Center, Americas North
3500 Steeles Ave. East, Tower 3/4
Markham, Ontario
Canada
L3R 2Z1
Reference: YE001
The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.
Note: Shipments will begin after the planned availability date.
Trademarks
Back to top
Printable version