IBM 3193 DISPLAY STATION MODEL 010 (122 KEY TYPEWRITER KEYBOARD)
AND MODEL 020 (103 KEY TYPEWRITER KEYBOARD) ANNOUNCED

Contents


Announcement Letter Number ZG86-0246 dated September 18, 1986
Europe Middle East Africa - Last Revised on September 18, 1986



Brief Description of Announcement, Charges, and Availability

Customer Letter Section


*****************************************************************
*                                                               *
*  IBM PROGRAMMING INFORMATION                 SEPTEMBER 1986   *
*                                                               *
*  IBM PROGRAMMING INFORMATION                                  *
*                                 for Europe, the Middle East   *
*  IBM PROGRAMMING INFORMATION               and Africa.        *
*                                                               *
*****************************************************************
*                                                               *
* This document is provided as general customer information     *
* only. IBM products and services which are announced and       *
* available in your country can be ordered under the applicable *
* standard agreements, terms, conditions and prices in effect   *
* at the time. For further information please contact your      *
* local IBM representative.                                     *
*                                                               *
*****************************************************************
=================================================================
                                                        ZG86-0246
IBM 3193 DISPLAY STATION MODEL  010 (122 KEY TYPEWRITER KEYBOARD)
AND MODEL 020 (103 KEY TYPEWRITER KEYBOARD) ANNOUNCED
IBM  announces  the  IBM 3193 Display  Station as a member of the
IBM 3270 display family which  provides the capability to display
alphanumeric  and image  information.   The   IBM  3193  provides
multiple logical terminals, multiple partitioning,  and up to  48
lines  of  alphanumeric  display  capability.  Image documents of
up  to letter  or  A4 size  may  be  displayed.  Image   handling
capability  is provided in conjunction with existing alphanumeric
functions.
The   IBM  3193   Display  Station   is   a   high    resolution,
monochrome,  portrait  type,  15  inch CRT display terminal.  Two
logical terminals may be functional on the screen.   The IBM 3193
Display Station  attaches to  System/370, 43XX,  303X, 308X,  and
3090 Processors via the IBM 3274/3174 Control Unit.  The IBM 3117
Scanner with  IBM 3117   Extension  Unit   feature and   the  IBM
3118  Scanner  can be attached to  the IBM 3193  Display Station.
Image data  compression is  a  technique   to save   transmission
time  and   reduce  storage requirements.  Compressed  images can
be  sent  to  the  IBM   3193  Display Station.  Decompression of
the image is performed in the IBM 3193.
HIGHLIGHTS
The  IBM 3193  Display Station  represents  an advanced  function
member of the IBM 3270.  Some of the highlights are as follows:
o 15  inch  monochrome display 880 (Horizontal) x 1200 (Vertical)
dots
o Multiple   logical  terminal  capability  (up  to  two  logical
terminals)
o IBM  3278 Model 2, 3, and 4 and 80  characters x 48 line Screen
Support
o Multiple partition capability (up to 8 partitions)
o Image datastream support
o Decompression of image data
o Image   manipulation    functions:   Scale,    Orient,  Mirror,
Invert, Fill
o IBM 3117 Scanner  Attachment  (with  IBM  3117   Extension Unit
feature)
o IBM 3118 Scanner Attachment
o Entry assist function
o Scrolling functions
o Selectable  cursors:  alphanumeric image cross cursor and image
rectangle.
o Display letter or A4 size image pages at 39.3 pels/cm.
o Enlarge key to enlarge a viewport
o Roll-Your-Own keyboard
DESCRIPTION
The IBM  3193 Display  Station is  a new  high resolution   image
display  with 880 dots horizontally  and 1200 dots vertically (48
dots worth of space are used as an operator  information area and
separator  lines  leaving  1152  dots  for  display).  The  image
capabilities are  significantly enhanced by  the provision  of an
all-points-addressable   APA)  screen  capability.  The  terminal
utilizes    a new 15 inch,  portrait type, monochrome cathode ray
tube and provides  a full 8 1/2  X 11 inch   or    A4  size image
display  capability  accepting compressed  or uncompressed  image
data from the host system.
This display terminal supports   multiple  logical  terminals and
provides  a user  with viewing  capability  of alphanumeric  data
only,  image data  only, or  a  combination of   both  image  and
alphanumeric data.  The image and  alphanumeric data displayed is
represented by dots providing a high  resolution white on a black
background, or black  on a white background  by reversing images.
Datastream compatibility   with  today's   IBM  3270  displays is
provided in alphanumeric application  environments.  The IBM 3193
Display Station is  designed   to support  existing  applications
programmed for the  IBM 3270 (except where  hardware features are
not   supported).  See  Limitations    section   for   additional
information.   The  character  box  size  is  11(horizontal)  and
24(vertical) dots.
The IBM 3193  Display Station provides advanced  display function
for processing  the alphanumeric and  image information.   One of
its   salient  functions   is to  provide  two logical  terminals
capability to the  user.  The terminal user may log-on  to one or
two applications or systems.  Each  configured screen acts like a
separate display station, referred to  as  a  logical terminal.
The IBM  3193 Display  Station is  compatible with  the IBM  3278
Models  2,   3, and  4.  The  screen formats  in split-screen  or
full-screen configurations are as follows;
In split-screen configuration:
o Two full 3278 Model 2 screens
o One IBM 3278  Model 2 screen of  24 rows of 80  columns and one
image screen
Full-screen configuration:
The following screens can exist singularly  or  two  of  them can
coexist, one hidden under the other.
o One full 3278 Model 2, 3, or 4 screen
o Up to 48 rows of 80 columns alphanumeric screen
o A  full  screen,  (image  only  or  image and alphameric mixed)
The  host can  send  image  data with  an  image   order that  is
executed in the IBM 3193.
Source Image Data
The   IBM   3193   accepts  source  image  data  which  have  the
following characteristics.
o Compression
- Compressed with Modified Modified Read format
- Uncompressed
o Horizontal and vertical resolution    (in  pels  per inch)
- Any  combination of 240 and  120 horizontally and vertically or
any combination  of  200  and  100 horizontally and vertically.
Some of the Image functions supported are:
o Decompression    and   mapping    of  image   data  stream   to
approximately  a  100  pel  screen   when  pages  are received in
varying pel resolutions
o Scale  up or down  the size of an extracted image  to:  4x, 3x,
2x, 3/2x, 4/3x, 1x, 3/4x, 2/3x, 1/2x, 1/3x, 1/4x
o Image orientation  rotates image  rectangles   0,  90,  180 and
270 degrees
o Image mirror rotates  an image around a  horizontal or vertical
axis  to  present a view of image from the other side
o Invert image changes each dot to reverse black/white
o Image fill causes a defined rectangle to  be  filled with white
or black
o Attachment  of  IBM  3117  Scanner   via the IBM 3117 Extension
Unit   feature   or    IBM   3118   Scanner   for   scanning  and
transmitting images of documents to the host system
MULTIPLE LOGICAL TERMINALS
The  IBM  3193  Display   Station   provides   multiple   logical
terminal  capability (up  to  two), which   allows  a user to use
the  IBM 3193  as  two independent  logical  terminals,  each  of
which  interacts   with its own  host application  program.  This
capability maximizes the  use  of  the  display terminal  without
modifying  the  existing applications.  Only  one  of the logical
terminals  provides   image capability.   Both logical  terminals
can be used to support existing alphanumeric applications.
MULTIPLE PARTITIONS
The  IBM 3193  Display Station   supports up   to  a  total of  8
multiple-partition   capability   in  one    or    two    logical

terminals.  A  partition can be  a  part of the divided screen or
can  be a  hidden   one.  Each   partition   will  be  separately
managed  via  application program control.    One  partition  can
handle   image   data    and   the   rest   of    the  partitions
alphanumeric  data.     A  partition  can   display alphanumerics
only, image only, or mixture of the image and alphanumerics.
A  partition with  which the  terminal  user   can  interact   is
called   an  active   partition  and  only one  partition can  be
active to  the operator,  at a  time.   The  terminal  user   can
successively    activate   partitions  by   pressing   the   Jump
Partition  key, and  the  application  program can  activate  any
partition in any sequence.
Setup mode  is provided  to customize  features of  the IBM  3193
Display Station.
KEYBOARDS
The IBM 3193 is offered in  two models differentiated only by the
keyboard shipped:
o IBM  3193 Model  010,  is offered  with  a  122 Key  Typewriter
Keyboard
o IBM  3193 Model  020,  is offered  with  a  103 Key  Typewriter
Keyboard
NOTE
Keyboards used  on other  products are  not Interchangeable  with
keyboards used on IBM 3193 Display Station.
The  3274  Keyboard  Definition Utility  supports  the  IBM  3193
Display  Station  allowing  definition   of   customer   specific
keyboard  layouts.  The  IBM  3274/3194  Dowstream Load  diskette
provides  space for  3 modified  layouts per  control unit.     A
keycap   removal  tool   is  standard   so  that  keycaps can  be
interchanged conveniently.
KEYBOARD FUNCTIONS ARE AS FOLLOWS
CURSORS
Improved cursor movement  is  provided.     Whenever  cursor keys
are  kept   depressed, the cursor  accelerates.  Two  new cursors
are  provided  in  an  image   partition  in   addition   to  the
alphanumeric  cursor;  i.e, an image cross  cursor and  an  image
rectangle  cursor.    The   cross  cursor informs a  host program
of  a  point   on   the   screen   and   the  rectangle    cursor
provides  the  host  program  with  the co-ordinates and the size
of a rectangular area on a screen.
If  two  cursor  move  keys,  one   of  which  moves  the  cursor
horizontally and  the other vertically,  are pressed at  the same
time, the cursor moves in  the resultant direction.  For example,
if the Cursor Right and the Cursor  Up keys are both pressed, the
cursor moves to the upper-right in a 45 degree direction.
Each  cursor has  its alternate  form.  The  operator can  choose
either  the  default  or  the  alternate  form  by  pressing  the
Alternate Cursor key.   In addition, the operator  can make these
cursors blink by using the Cursor Blink key.
ENLARGE KEY
The Enlarge  Key is  used  to   enlarge  the   viewport  to   the
physical   screen  size.     For example,  when  an  operator  is
using  a  split screen  and is viewing  half of  an image  in one
logical terminal, the operator can press  the Enlarge key and see
the  full    page   (the    other    logical     terminal    will
disappear from the physical screen).
SCROLL KEYS
Four    Scroll   Keys  are provided;  left,  right, forward,  and
backward.   The  following scrolling   operation   is   performed
while   one  of   the  scroll  keys  is   depressed, depending on
which partition is active.
o Alphanumeric   partition.      Alphanumeric   data    will   be
scrolled.  A scroll unit is a character cell.
o Alphanumeric with image  partition.     Alphanumeric  and image
data will be scrolled together.  A  scrolling unit is a character
cell.
o Image  only  partition.   Image  data   will  be  scrolled.   A
scrolling unit is 1 dot or pel.
The host program can specify the  number of scroll units for both
horizontal and vertical directions.
JUMP KEY
This   key  is   effective  only   in   two   logical    terminal
operation.   Pressing this  key  alternately  makes each  logical
terminal screen active.
JUMP PARTITION KEY
This     key     is    effective     only     in  multi-partition
operation.    Pressing  this  key  switches active partition from
one to the next.
CLEAR PARTITION KEY
Pressing this key  causes all data in the active  partition to be
erased.
CLEAR KEY
Pressing  this key  erases data  in  all  presentation   space(s)
operating under an active logical terminal.
SETUP KEY
Pressing this key  causes the IBM 3193 to enter  setup mode.  The
following  are some of  the typical items which can be  set up by
the terminal user:
o Screen layout: Full screen or split screen
o Logical Terminal Attributes
- Screen   model  of   each  logical  terminal  (IBM 3278,  Model
2,3,4 or 48 rows x 80 column screen)
- Extended attributes
- Numeric Lock on/off
- Number of partitions:  0 to 8
o Display polarity:  Dark on a bright  background or bright  on a
dark background
o Keyboard ID (for keyboard layout selection)
o Audible alarm:  Volume
o Mono/Dual case Selection.
o Local copy: Viewport copy or presentation space copy
ENTRY ASSIST
IBM  3193 supports    Entry     Assist     capabilities  for   an
operator   for  entry   and  editing   of   text material.    The
capabilities   include,   margins,   tabs,   wordwrap,   improved
cursor  positioning,  improved  character/word   delete,   cursor
position   indicator and  an  audible  end-of-line warning  tone.
Entry Assist is intended for use  primarily with  a  specific set
of host editor programs.
ROLL YOUR OWN KEYBOARD
Three additional keyboard  layouts can be defined  in addition to
the standard layout.
OPERATOR FACTORS
The IBM  3193 Display Station  has a screen  with anti-reflection
treatment to minimize glare.  Indicators are displayed in symbols
on  the bottom  row of  the screen,  outside the  data area,  and
provide  useful  operator information.  An underline cursor and a
rectangular  reverse  video  cursor with  blinking   option,  are
provided  for  alphanumerics.   The cross  cursor  and  rectangle
cursor with  reverse and blinking  option are provided  for image
operations in the image partition.   An audible alarm is provided
to  alert the  operator.   The volume  of   the   alarm  can   be
adjusted by the operator in the 3193 Display Station setup mode.
The  video pedestal  provides 19.4  degrees of   tilt  (plus   15
degrees   to  minus   4.4 degrees)    and 180  degrees of  swivel
(plus  or minus  90  degrees   from  the   center  position)   to
enable the display to be positioned properly.
The   keyboard  is   low  profiled  and connected  with a  coiled
cable.    The  keyboard   provides  three   or   two  angles   of
inclination  (6, 12 or  18 degrees for Model 1 keyboard  and 6 or
12 degrees for Model 2 keyboard) for operator adjustment.
INPUT EDITING CAPABILITY
Cursor  move, tab,  home   key,    back  tab,   insert,   delete,
extended   erase  (erase   to  end-of-field,  erase all  keyboard
input  data, and  erase  entire   screen    or partition)     and
cursor    select    keys are all  standard.  All alphanumeric and
special  symbol    keys   have    typematic   capability.  Cursor
move   keys   cause  acceleration of the cursor  when held  down.
Simultaneous    depression    of     vertical    and   horizontal
cursor  move  keys  will cause  diagonal cursor movement.  Fields
of data can be selected by positioning the cursor, then using the
cursor select key.  24 Program Function keys are provided both on
Model 10  keyboard and Model  20 keyboards   respectively.    The
IBM  3193   Display Station  supports Entry  Assist capabilities,
which  facilitate an   operator  entry   and   editing  of   text
material.     The   capabilities   include   margins,    tabbing,
wordwrap,  improved cursor   positioning,  character/word delete,
cursor  position indicator  and  an  audible end-of-line  warning
tone.     Entry Assist   is  intended for  use  primarily with  a
specific set of host editor programs.
SECURITY FACILITIES

Data  security functions  provided by   the   IBM  3193   Display
Station    are   non-display  control     (specified   in     the
attribute  byte) and  the Security  Keylock.   A program  defined
non-displayed input mode  is provided for  fields    of  data, so
that  data  is  entered from the keyboard without being displayed
on  the  screen.  A  Security  Keylock  locks the  keyboards  and
prevents display of  data on the IBM 3193  Display Station unless
the key  is turned  to the  "UNLOCK"   position.    The   key  is
removable in both the 'LOCK' and 'UNLOCK' positions.
PUBLICATIONS
o IBM  3193  Display  Station Description, (GA18-2364).
o IBM 3193 Display Station Setup Instructions, (GA18-2565)*
o IBM 3193 Display Station Operator's Guide, (GA18-2570)*
o IBM  3193  Display Station  Problem Solving  Quick Check Guide,
(GA18-2568)*.
o IBM   3193    Display   Station     Problem    Solving   Guide,
(GA18-2569)*
o IBM   3193  Display   Station     Repair   Center   Maintenance
Information, (SY18-2134).
*  The publications  marked   with   an  asterisk,   or   country
language  version  of them where they exist, will be shipped with
each  machine.    Contact  your  country  publications department
for  the  order  form  number  assigned for each country.
NOTE
The   GA18-2364     and    SY18-2134    or    country    language
versions  of these where they exist may be ordered for a fee from
the European Publications Center,  Copenhagen,  Denmark.  Consult
your IBM Marketing Representative.
National   language  versions   of   these   manuals   will    be
available as follows:
                IBM 3193 DISPLAY STATION DESCRIPTION
                        U.S. English       GA18-2364
                        Dutch              GA14-5566
                        German             GA12-3846
IBM 3193 Display        U.S. English       GA18-2570
Station Operators       Belgian-Dutch      GB11-7718
Guide                   Belgian-French     GB11-6518
                        Danish             GA19-6204
                        Dutch              GA14-5567
                        French             GA11-0537
                        German             GA12-3847
                        Italian            GA13-1188
                        Norwegian          GA15-3792
                        Spanish            GA10-0085
                        U.K. English       GU21-6031
IBM 3193                U.S. English       GA18-2565
Display Station         Belgian-Dutch      GB11-7719
Set-Up Instructions     Belgian-French     GB11-6519
                        Danish             GA19-6205
                        Dutch              GA14-5568
                        Finnish            GB11-7103
                        French             GA11-0491
                        German             GA12-3848
                        Italian            GA13-1187
                        Norwegian          GA15-3793
                        Spanish            GA10-0086
                        Swedish            GA14-1739
                        U.K. English       GU21-6032
IBM 3193 Display        U.S. English       GA18-2568
Station Problem         Belgian-Dutch      GB11-7720
Solving Quick           Belgian-French     GB11-6520
Check Guide             Danish             GA19-6206
                        Dutch              GA14-5569
                        Finnish            GB11-7104
                        French             GA11-0492
                        German             GA12-3849
                        Italian            GA13-1186
                        Spanish            GA10-0087
                        Norwegian          GA15-3795
                        U.K. English       GU21-6033
IBM 3193 Display        U.S. English       GA18-2569
Station Problem         Belgian-Dutch      GB11-7721
Solving Guide           Belgian-French     GB11-6521
                        Danish             GA19-6207
                        Dutch              GA14-5570
                        French             GA11-0493
                        German             GA12-3850
                        Italian            GA13-1185
                        Spanish            GA10-0088
                        Norwegian          GA15-3796
                        U.K. English       GU21-6034
SCHEDULE
PLANNED GENERAL AVAILABILITY:  December 1986
EDUCATION SUPPORT
TECHNICAL INFORMATION
(Information both for  technical and application education  to be
provided by country.)
SPECIFIED OPERATING ENVIRONMENT
HARDWARE REQUIREMENTS
SYSTEM ATTACHMENT
The 3193  Display Station  attaches  to the IBM System/370, 43xx,
303x,  308x,   and   3090  Processors  via   the   IBM  3274/3174
Control     Unit.         All    attachment   environments    are
supported,   i.e.,   SNA    local  channel,  SNA remote,  non-SNA
local channel, and BSC remote.
SOFTWARE REQUIREMENTS
The    IBM   3193    Display   Station    is  supported  by   the
current    level   of  DOS/VSE,  OS/VS1,   MVS,  MVS/XA,   VM/SP,
VM/SP    High   Performance     Option,     and     SSX/VSE   for
System/370,    43xx, 303x,  308x,   and   3090  Processors.   IMS
non-SNA  and TCAM  are not  supported.   The  IBM  3193   Display
Station is designed to operate with  GDDM Version 2 Release 1 and
GDDM-IVU (Image View Utility) to support image.
COMPATIBILITY
Datastream  compatibility  with  today's  IBM  3270  displays  is
provided in alphanumeric application  environments.  The IBM 3193
provides IBM  3278 model  2, 3  and 4  screen support.    The IBM
3193   Display    Station   is   designed   to   support existing
applications  programmed for  the IBM 3270 (except  here hardware
features  are  not  supported).    See    the Limitations section
for additional information.
The  following  display  terminals  and printers can coexist with
the IBM 3193 (including IBM 3117 and IBM 3118 Scanners) under the
same IBM  3274/3174 Control  Unit: (with  or without  PS):  3191,
3278, 3287, 3289, 3279, 3178, 3179 (including 3179-G) and 3180.
The  electrical  interface  of  the IBM  3193  to  the  IBM  3274
controller  is  identical  to  those  of  existing  3270  display
terminals.
PREREQUISITES
The IBM 3193 Display Station is   designed  to attach  to  an IBM
3174    or  IBM  3274  Control Units.    The  supported IBM  3174
Control Unit  Models are  1L, 1R,   2R,  3R,  51R   or   53R with
Feature   Code  #9017.    The  supported  IBM 3274  Control  Unit
Models   are 31A,  31C, 31D,  41A, 41C,  41D, 51C  and  61C  with
configuration  Support D at  microcode Release 65  or higher. The
diskette is  orderable   at  no   charge.     For  ordering   the
feature    code    diskette,   contact    your    IBM   marketing
representative.
o The IBM 3174 Downstream load diskette, 3174 feature code 9017
o The  IBM   3274  Downstream  load  diskette  FC  #9311  (except
Germany) or #9313  (Germany only)  provides space  for 3 modified
keyboard layouts per Control Unit.  The diskette is  supplied via
microcode  release  level  64.0  or  higher  for  the  3274  with
configuration support D.   The keyboard layouts are   selected by
the operator  of the  IBM 3193 Display Station during setup mode.
Customers  who plan   to  attach   IBM  3193   terminals  to   to
non-IBM   controllers,   should  contact   their   IBM  marketing
representative for  the appropriate microcode diskette.     It is
the   customer's   responsibility  to   determine  if   microcode
diskettes may be required.
An IBM 3178, 3179, 3180, 3278 or 3279 Display  Station  with 1920
character  screen or larger must be attached to Port 0 of the IBM
3274  or  3174  Control Unit  for  customization  and  diagnostic
support.
LIMITATIONS
IBM  3290   Information   Panel  Display  Station cannot  be used
on   the same  IBM  3274  when the  IBM  3274  is  customized  to
support     the   IBM    3193     Display    Station.    Existing

alphanumeric  applications will  run on  the  IBM  3193   Display
Station   unless  the   program is  affected  by   the  IBM  3274
Control    Unit    configurations    restrictions    (eg.,     no
Category  B terminals)  or required  hardware  functions are  not
available   in  the   3193   Display   Station,  eg.,    magnetic
readers,   light   pen,  triple   plane   programmable   symbols,
encryption/decryption or unsupported screen sizes.
BSC Copy Command is not supported.
Connections and features not supported by the IBM 3193 are:
o Programmed Symbol Set
o APL/Text
o Ruling
o Attachment of Magnetic Reader or Selector Light Pen
o Data Entry Keyboard
o Color IBM  3193 is   monochrome; it  does, however,  accept the
3270 data stream with color attributes for display)
o Graphic Data Stream
PLANNING INFORMATION
CUSTOMER RESPONSIBILITY
The   customer  is  responsible  for  unpacking,  setting  up the
display station, and invoking the  diagnostics when necessary.  a
copy of  the IBM 3193  Setup Instructions (GA18-2565  or national
language   version,  when available)  which contain  detailed CSU
instructions,   will   be   shipped with  each machine.
Customers are responsible for all  modifications they make to the
IBM 3193 Display Station keyboard layouts.
Customers   are responsible  for  handling  any keyboard  changes
necessary  in  the   event  of   a   maintenance  action.     The
customer    should   remove   all   special   keycaps  prior   to
submitting a keyboard for exchange or repair.    A  keyboard with
the  standard  key   layout should be sent to IBM  and a standard
key layout will be returned to the customer.
PHYSICAL  PLANNING
See  the  "IBM  3193  Display   Station Description"  (GA18-2364)
for  detailed  physical  planning information.
The customer is responsible for:
o Adequate    site,   system    and    other    vendor   required
preparation.
o Receipt   at   customer's   receiving   dock,   unpacking   and
placement of the unit.
o Physical  setup, connection of cables  in customer access area,
switch setting and checkout.
o Contacting an  IBM service representative for attachment of the
IBM   3193 Display  Station  communication  cable  to an  on-site
serviced IBM 3274/3174 Control Unit.
o Determination of required number of spares.
o Performing   Customer    Problem   Analysis    and   Resolution
(CPAR).
o Returning   a  failing   element  to  the  Repair  Center  (for
Customer    Carry-in    Repair    maintenance)    or   to     the
Service/Exchange   Center   (for  Customer    Carry-in   Exchange
maintenance).
o Contacting  IBM  CE Branch  Office  if  On-Site Repair  or  IBM
On-Site Exchange service is required.
o Removing   customer-owned   keycaps   prior   to  submitting  a
keyboard for exchange  or repair  service and return the standard
layout keyboard to IBM.
o Returning  security  keys to  IBM  if  any exchange  service of
logic   element  is required.   If the keys  are  not returned to
IBM,  the  customer  will be charged  for the replacement  of the
security keys and locks on a time and material basis.
o Ordering    the   "IBM  3193    Display   Station   Description
Manual",   GA18-2364 (or  national  language  manual  where  they
exist) for site planning and preparation work.  The manual is not
shipped with each machine.
SPARES
It   is  recommended   that  the   customer   replace  a  failing
element   with a  spare element  and that  the customer  purchase
sufficient  spare  IBM  3193  Display Station units for such use.
The number of spare units is  dependent    upon    the number  of
the  IBM 3193 Display Station  units the customer has  installed,
the   application     requirements,    physical   locations   and
layout.   Determination of  the required  number of  spares is  a
customer responsibility.
The  minimum number  of spare  units recommended  where one  unit
consists of a keyboard, a logic, a video, a pedestal, and  a line
cord is shown in the following table:
                        RECOMMENDED MINIMUM
  NUMBER INSTALLED        SPARE MACHINES
    1-  50                     1
   51- 100                     2
  101- 300                     3
  301- 500                     5
  501- 700                     6
  701-1000                     7
It   is recommended  that the  customer test  spares for  correct
operation  before putting  them on  the shelf.    Spares may   be
ordered  as  a  complete  machine or as individual elements.  See
"Accessories"    and    "Machine    Elements"    for     ordering
individual element.
CABLE ORDERS
100-127V    AC,   1-phase,    3-wire, 50-60  Hz  or 200-240V  AC,
1-phase, 3-wire, 50-60 Hz, 2.8 meter (9.0  foot)  line  cord with
non-locking plug.:   The country number  of the  ordering country
determines  the  line  cord  and  shipping group.
Cables:  Coaxial cable  or a  twisted  pair (Type  1 support)  is
required for product support.
Cable and associated  accessories can be purchased from  IBM or a
customer-selected  source.   The  customer   is  responsible  for
installation  and   maintenance  of  the  cable   and  associated
accessories.     Twisted     pair     cable:      For      proper
identification,  installation  and application   of   cable   and
associated   accessories,  refer   to   IBM   Cabling  System   -
Planning  and Installation  Guide,  GA27-3361.   For pricing  and
ordering  information, refer  to  the   appropriate  IBM   DIRECT
catalog.      Coaxial   Cable:     For   proper   identification,
installation   and   application  of   cable    and    associated
accessories,   refer  to IBM  3270  Installation  Manual-Physical
Planning,  GA27-2787 and  Coaxial  Cable  and Associated  Manual,
GA27-2805.
PROBLEM DETERMINATION
Problem  determination  by  the customer  has  been  enhanced  to
increase the availability of the IBM 3193 to the customer.
This  is  done  by  use of  the  Customer  Problem  Analysis  and
Resolution (CPAR)  procedures for use by the operator.
PACKAGING
The    IBM   3193   shipment   consists   of    the     following
components;   video  element, logic  element,  keyboard  element,
pedestal, 9 foot line cord and publications.
SECURITY, AUDITABILITY AND CONTROL
Data  security functions  provided by  the  IBM  3193     Display
Station    are   non-display field    control  (specified  in the
attribute   byte)  and   the   Security    Keylock.          User
management   is   responsible   for  evaluation,   selection, and
implementation    of     security   features,      administrative
procedures,    and    appropriate  controls    in     application
systems       and       communications   facilities.   (Note:  If
sensitive  data   is  sent     over     external   communications
facilities,    user   management    may    wish   to pursue   the
application  of    cryptography.      For   more   information on
data   security   controls,  see  "Data  Security   Controls  and
Procedures", G320-5649).
CHARGES, TERMS AND CONDITIONS
CHARGES
Contact your IBM Marketing Representative.
TERMS AND CONDITIONS
OFFERING
o Purchase,  under  the  Agreement  for  Purchase/Sale   of   IBM
Machines
o Term  Lease under  the IBM Term Lease  Agreement.  Consult your
IBM Marketing Representative for details.
o Volume Purchase  under the Volume Workstation   Amendment.  The
applicable   discount    schedule  has  been  attached   to  this
announcement letter.
WARRANTY: 12 Months
WARRANTY SERVICE
If  purchased under the IBM  Volume Workstation Agreement the IBM
Service/Exchange Repair Center Amendment  applies.    All service
options    announced    as   available   under   the  Maintenance
Agreement       (see       paragraph     MAINTENANCE   OFFERINGS)
are available   at  Customer   discretion  and without additional
charge during the warranty period.
MAINTENANCE OFFERINGS

IBM offers maintenance services as follows:
o IBM  Maintenance  Agreement  in  conjunction   with   the   IBM
Service/ Exchange Repair Center Amendment.
Maintenance  options: (Note:  The availability of these offerings
may vary by countries)
- Customer On-site Exchange
- Customer Carry-in/Mail-in Repair
- Customer Carry-in/Mail-in Exchange
- Courier Service
- IBM On-site Exchange
Maintenance Services  under these  options are   available during
the   normal   IBM business  hours  and  no optional  periods  of
maintenance service are offered.
- Hourly  Services:  The  repair   of   defective   elements  not
covered  by warranty or a  maintenance agreement is only provided
at the  IBM  Repair  Center  on  an hourly service basis.
ON-SITE ASSISTANCE
On  customers request,  IBM will  provide  On-Site Assistance  to
perform  Customer  Problem  Analysis  and Resolution (CPAR).  IBM
will  use  the  same  documentation  that  is  available  to  the
customer.  This service is provided on  an  hourly  basis  at the
applicable hourly rates and terms and conditions.
MAINTENANCE BILLING PERIOD:  Annually
CUSTOMER SET UP (CSU):  Yes; 1 day
HOURLY SERVICE CLASS:  2
MACHINE GROUP:  A
PRE INSTALLATION TEST ALLOWANCE:  None
ON-SITE ALLOWANCE:  None
EDUCATIONAL ALLOWANCE
Educational   Allowance will  be available  under  the terms  and
conditions  of the   IBM   Volume   Workstation  Amendment.     A
separate   Supplement   for eligible  institutions  contains  the
applicable discounts.
      VOLUME WORKSTATION AMENDMENT - DESIGNATED BULLETIN -
                               TO
          SUPPLEMENT TO VOLUME WORKSTATION AMENDMENT-I
                         Date: _________
Effective today,  the IBM  3193 has  been added  to the  eligible
product   list  of   the   Supplement   to  Volume    Workstation
Amendment-I.     It will  be included  into Category  D as  shown
below.
Settlement Charges: ________
Additional Terms and Conditions:   N/A
*---------------------------------------------------------------*
|       SUPPLEMENT TO VOLUME WORKSTATION AMENDMENT-I            |
|                                                               |
|---------------------------------------------------------------|
|Installation period duration: 12 months from commencement date.|
|---------------------------------------------------------------|
|  DISCOUNT   |                               |WARRANTY|  QTY.  |
|  SCHEDULE   |      ELIGIBLE PRODUCTS        |(MONTHS)| BY CAT.|
|---------------------------------------------------------------|
|             |   CATEGORY D:  DISPLAYS       |        |        |
|             |   3104  Display Terminal      |   3    |        |
|   1-9  =  0%|   3178  Display Station       |   3    |        |
|  10-14 =  6%|   3179  Color Display Station |   3    |        |
|  15-34 =  9%|   3180  Display Station       |   3    |        |
|             |   3191  Display Station       |  36    |        |
|             |   3193  Display Station       |  12    |        |
| 35- 74 = 12%|   3196  Display Station       |  36    |        |
| 75-174 = 15%|   3205  Color Display Console |   3    |        |
|175-349 = 17%|   3278  Display Station *)    |   3    |        |
|350-699 = 20%|   3279  Color Display Station*)   3    |        |
|700 +   = 23%|   5251  Display Station *)    |   3    |        |
|             |   5291  Display Station       |   3    |        |
|             |   5292  Color Display Station |   3    |        |
|             |   8775  Display Terminal *)   |   3    |        |
|             | *) Purchase of Install-Discount        |        |
|             |price not less than 40% of the |        |        |
|             |purchase price used to determine        |        |
|             |the net purchase option price  |        |        |
|             |under the LRA.                 |        |        |
*---------------------------------------------------------------*
*---------------------------------------------------------------*
|             |                               |        |        |
|             | CATEGORY DD                   |        |        |
|             |                               |        |        |
|   See       | 3979  Expansion Unit          |    3   |        |
|             | XXXX  Features/MES            |    3   |        |
|             |                               |        |        |
|   Note      | NOTE: Above products receive  |        |        |
|             | same discount percent as the  |        |        |
|             | committed quantity in Category|        |        |
|             | D, but do not count in        |        |        |
|             | quantity accumulation.        |        |        |
*---------------------------------------------------------------*
      VOLUME WORKSTATION AMENDMENT - DESIGNATED BULLETIN -
                               TO
EDUCATIONAL ALLOWANCE SUPPLEMENT TO VOLUME WORKSTATION AMENDMENT
                      Date: ______________
Effective today, IBM 3193 has been  added to the eligible product
list   of  the   Educational  Allowance   Supplement  to   Volume
Workstation Amendment.   It will be  included into Category  D as
shown below:
Settlement Charges: ____________
Additional Terms and Conditions:  N/A
*---------------------------------------------------------------*
|EDUCATIONAL ALLOWANCE SUPPLEMENT TO VOLUME WORKSTATION AMENDMENT
|---------------------------------------------------------------|
|Installation period duration: 12 months from commencement date.|
|---------------------------------------------------------------|
| DISCOUNT     |                             |WARRANTY  |  QTY  |
| SCHEDULE     |   ELIGIBLE PRODUCTS         |(MONTHS)  |BY CAT.|
|---------------------------------------------------------------|
|              |  CATEGORY D: DISPLAYS       |          |       |
|  1-9   = 10% | 3104  Display Terminals     |   3      |       |
| 10-14  = 16% | 3178  Display Station       |   3      |       |
| 15-34  = 19% | 3179  Color Display Station |   3      |       |
| 35 +   = 23% | 3180  Display Station       |   3      |       |
|              | 3191  Display Station       |  36      |       |
|              | 3193  Display Station       |  12      |       |
|              | 3196  Display Station       |  36      |       |
|              | 3205  Color Display Console |   3      |       |
|              | 3278  Display Station *)    |   3      |       |
|              | 3279  Color Display Station *)  3      |       |
|              | 5251  Display Station *)    |   3      |       |
|              | 5291  Display Station       |   3      |       |
|              | 5292  Color Display Station |   3      |       |
|              | 8775  Display Terminal *)   |   3      |       |
|              |                             |          |       |
|              |*) Purchase of Install-Discount         |       |
*---------------------------------------------------------------*
*---------------------------------------------------------------*
|              |                             |          |       |
|              | CATEGORY DD                 |          |       |
|              |                             |          |       |
|  See         | 3979  Expansion Unit        |    3     |       |
|              | XXXX  Features/MES          |    3     |       |
|  Note        |                             |          |       |
|              | NOTE: Above products receive|          |       |
|              | same discount percent as the|          |       |
|              | committed quantity in       |          |       |
|              | Category D, but so not count|          |       |
|              | in quantity accumulation.   |          |       |
*---------------------------------------------------------------*
ANNUAL MAINTENANCE CHARGES
For   all  local    charges    consult    your   IBM    Marketing
Representative.
ACCESSORIES
Cables:  IBM   shielded twisted  pair cable  (Type I  support) or

coaxial  cable is  required for  product  attachment.  Cable  and
associated  accessories  can   be  purchased   from   IBM  or   a
customer-selected   source.    The customer  is  responsible  for
installation  and maintenance  of   the   cable  and   associated
accessories.
Twisted  pair cable: For  proper identification, installation and
application of cable and associated   accessories,  refer to  IBM
Cabling  System   - Planning  and Installation  Guide, GA27-3361.
For pricing and ordering information,   refer  to the appropriate
IBM DIRECT catalog.
Coaxial   Cable:   For proper  identification,  installation  and
application of cable and associated   accessories,  refer  to IBM
3270   Installation   Manual-Physical   Planning,  GA27-2787  and
Coaxial Cable and Associated Manual, GA27-2805
The  following  accessories can  be ordered  from country  Direct
Marketing  Center  or  other   responsible   supplies   marketing
group.
A switch control unit accessory can be ordered.
    Switch Control Unit*
              English                  6052157
              French                   6052162
              German                   6052161
              Italian                  6052163
              Spanish                  6052159
NOTE *
Permits  switching operational  control   of   the  3193  Display
Station  between  two  different control units.  The  customer is
responsible   for    procurement  and   installation    of   this
accessory,  and also  for the  replacement of  a defective  unit.
There is no switch control  unit  designed  specifically  for the
3193  Display   Station, but  use can    be  made   of  the  unit
designed  for  the  3278  or  3279.  The 3279 switch is suggested
even though it  does not fit readily  under the foot of  the 3193
Display Station  since it  is better adapted   than the  IBM 3278
switch to a free-standing position.
Description                                Part Number
Clear lens keycaps (60 caps) with paper    6341707
inserts (150 white and 150 gray)
and keycap removal tool
Paper inserts (150 white and 150 gray)
for Clear lens keycaps                     6341704
Keycap removal tools (6 tools)             1351717
Keyboard overlays (10) for Model 01X
   English                                 6456082
   Spanish                                 6456083
   German                                  6456084
   French                                  6456085
   Italian                                 6456086
Keyboard overlays (10) for Model 02X
   English                                 6456146
   Spanish                                 6456147
   German                                  6456148
   French                                  6456149
   Italian                                 6456150
For local charges, consult your IBM marketing representative.
MACHINE ELEMENTS
Machine   elements  can   be   ordered   to  provide   individual
elements as needed by the customer in the  use  of  the  IBM 3193
Display Station.
ORDER ENTRY
For shipment, specify Machine Element (P/N) Number at the time of
order entry.
Order using the part number ordering facility of WTAAS.
The video, logic, keyboard, pedestal and  line  cord  of  the IBM
3193 Display Station can be ordered as follows:
   Machine
   Element           P/N
   -------         -------
    Video          6238880   Saudi Arabia
    Video          6238901   Austria, Algeria, Bahrain, Belgium,
                             Bulgaria, Denmark, Egypt, France,
                             Finland, Germany, Hungary, Iceland,
                             Ireland, Israel, Italy, Jordan,
                             Kuwait, Lebanon, Netherlands,
                             Norway, Pakistan, Poland, Qatar,
                             Portugal, Romania, Spain, Sweden,
                             Switzerland, Syria, United Kingdom,
                             Yugoslavia, Sudan, Sierra Leone,
                             Cameroon, Central Africa, South
                             Africa
    Logic          6238910   All EMEA Countries except Saudi
                             Arabia
    Logic          6238810   Saudi Arabia
Keyboard-TpwrMod.1 1391016   Austrian/German
             Mod.2 1391077
Keyboard-TpwrMod.1 1391017   Belgian
             Mod.2 1391078
Keyboard-TpwrMod.1 1391008   Danish
             Mod.2 1391069
Keyboard-TpwrMod.1 1391018   French - AZERTY
             Mod.2 1391079
Keyboard-TpwrMod.1 1391009   Italian
             Mod.2 1391070
Keyboard-TpwrMod.1 1391010   Norwegian
             Mod.2 1391071
Keyboard-TpwrMod.1 1391011  Portuguese
             Mod.2 1391072
Keyboard-TpwrMod.1 1391019  Spanish (or New Spanish)
             Mod.2 1391080
Keyboard-TpwrMod.1 1391015   Finnish/Swedish
             Mod.2 1391076
Keyboard-TpwrMod.1 1391012   Swiss-French
             Mod.2 1391073
Keyboard-TpwrMod.1 1391013   Swiss-German
             Mod.2 1391074
Keyboard-TpwrMod.1 1391014   UK-English
             Mod.2 1391075
Keyboard-TpwrMod.1 1390832   US-English
             Mod.2 1391065
    Pedestal       6456190   All countries
    Line Cord      6952317   Algeria, Austria, Belgium, Bulgaria,
                             Cameroon, Central Africa, Egypt,
                             Finland, France, Germany, Iceland,
                             Hungary, Lebanon, Netherlands,
                             Norway, Poland, Portugal, Rumania,
                             Spain, Sudan, Sweden, Syria,
                             Yugoslavia
    Line Cord      6952353   Bahrain, Ireland, Jordan, Kuwait,
                             Qatar, United Kingdom, Sierra Leone
    Line Cord      6952362   Switzerland
    Line Cord      6952344   Pakistan, South Africa
    Line Cord      6952326   Denmark
    Line Cord      6952371   Italy
    Line Cord      6952380   Israel
    Line Cord      6952297   Saudi Arabia
Prices: For all local charges, contact your country financial
        organization.
CUSTOMER REPLACEMENT PARTS
Following   parts  are   not  covered   by   an  IBM  maintenance
agreement   and  must   be  purchased   by   the  customer   when
replacement is needed.
Order from Country Distribution Center.
Description                Part Number
Field Packaging Material
   For Video               6481600
   For Logic               6316868
   For Model 1 keyboard    7342987
   For Model 2 keyboard    7342889
Keys (Note)                6342xxx (3 digits of key code numbers)
NOTE
The  3193 Display   Station  is   shipped  with   two  keys   for
Security Keylock. Additional keys can be purchased from IBM.  Key
identification  number must  accompany  each   order.    If  keys
are lost and the key identification  number is unknown, the Logic
Element  should be  sent  to an  IBM Repair  Center   or an   IBM
Service/Exchange  Center for  replacement of  the  locks and  the
keys.    This  service   is  available   on   an  hourly  service
basis.
*****   END OF DOCUMENT   *****

Share this page

Digg Linked In

Contact IBM

Feedback

-->