IBM Corporation --- IBM(R) Maximo(R) Asset Management Release 7.1.1.7 Hot Fix Build: Date: Note: Before you start using this document, read the information in the Notices section at the end of this document. (C) Copyright International Business Machines Corporation 2011, 20(*). All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. =============================================================================================== Table of Contents =============================================================================================== I. Introduction II. Installation Instructions III. Manual Changes IV. Issues Resolved V. Notices =============================================================================================== I. Introduction =============================================================================================== Product : Maximo Asset Management Version : Release 7.1.1.7 Dependencies : NONE PREREQUISITES : Maximo Base Services Release 7.1.1.7 has been installed CO-REQUISITES : NONE A hot fix is a group of critical issues that have been repaired since the product fix pack or patch was released. The hot fix is cumulative and may contain other fixes in addition to the issue(s) that affect your site. The hot fix must be applied in full in order to be supportable. Customers should validate this hot fix by installing the hot fix in a test environment prior to rolling it out to a production environment. Hot fixes, by their very nature, go through a limited quality assurance cycle and may or may not be included in the latest available program patch. =============================================================================================== II. Installation Instructions =============================================================================================== This hot fix overwrites your existing Maximo directory structure and it contains database scripts that modify your database. To avoid loss of data, create backup copies of the existing Maximo directory files and back up the database. If errors occur during installation, see the IBM Support Portal for solutions that are relevant to your product and version. For more information, see www.ibm.com/support/entry/portal/Overview/Software/Tivoli/. Uninstall instructions: You extract the hot fix compressed file to the Maximo install_home directory, for example, C:\ibm\smp\maximo. To uninstall the hot fix, restore your backed-up versions to the Maximo home directory, database, and Deployment Engine database. To learn how to back up the databases, see the information center for your product. Installing the hot fix Prerequisites: If any database configuration changes are pending, complete them before you proceed. Procedure: 1. Shut down the application server. To learn how to shut down the application server, see the information center for your product. 2. Create backup copies of the existing Maximo directory files and back up the database. The database administrator must perform this task. 3. Download the hot fix compressed file. 4. From the \bin directory, run the solutionInstallerGUI.bat utility. 5. On the Introduction panel, click Next. 6. On the Choose PSI Package panel, click Choose and navigate to the hot fix compressed file. 7. Select the hot fix compressed file and click Open. 8. Follow the on-screen instructions. Manual steps are required to update the database and rebuild and redeploy the EAR files. 9. Run the hot fix database scripts, by using the updatedb.bat utility. a. Open a command prompt window and run the following command: cd \\tools\maximo b. From the \tools\maximo directory, run the updatedb.bat utility. 10. See the Manual Changes section of this document for any manual updates that must be applied. 11. Delete the application server cache. The location of the cache files depends on the version of application server that you are running. For example; Oracle WebLogic Server: \user_projects\domains\mydomain\servers\AdminServer\ IBM WebSphere Application Server: \AppServer\profiles\Custom01\temp\Node01\MAXIMOSERVER 12. Delete the web browser cache on every computer that uses the product. 13. Rebuild and redeploy the EAR files. 14. Restart the application server. =============================================================================================== III. Manual Changes =============================================================================================== --- Issue(s): 10-16048 Description: Attributes are not being displayed under the asset specification in the move/swap/modify dialog box of the Work Order application. Manual Changes: Edit the library.xml file to change the parentdatasrc in the two areas: 1. Search for 4. Replace with 5. Replace with 6. Replace with 7. Save the file and import it to Maximo by using Application Designer. --- APAR #: IZ80233 Issue(s): 10-16243 Description: In the Work Oder apllication, queries done on Chart of Account do not use an index. Database Scripts: n/a Manual Changes: If you do not want the upper function used on GLACCOUNT in qbe, go to the System Properties app, add a new property named mxe.upperGLValues and set its value to 1. --- APAR #: IZ80243 Issue(s): 10-16297 Description: In Item Assembly Structures, if you use the 'Move To option' on the 'Belongs To' field to move an item with children associated to it, the Item Assembly Structure loses the top level. Database Scripts: N/A Manual Changes: This fix requires presentation changes using Application Designer. 1. Go to Application Designer. 2. Bring up ITEM application 3. Switch to Item Assembly Structure tab 4. Cick on the second datasrc(there are two) and edit Properties. You will see the values displayed as: Control ID: parentitem parent Data Source ID: ias relationship: PARENT In Bean Class: pleae enter: psdi.webclient.beans.item.BelongsToItemStructBean 5. Save the changes. --- APAR #: IZ84434 Issue(s): 10-17861 Description: In the Item Master application, if you try to move an IAS to a Location using the children table dialog box, and then try to apply this IAS to a Location, the new Location is created only for the top-level item. Database Scripts: N/A Manual Changes: This fix requires presentation changes using Application Designer. 1. Go to Application Designer. 2. Bring up ITEM application 3. Switch to Item Assembly Structure tab 4. In the Children table window, you will see "Children" is underlined. 5. Right Click Properties and dialog opens. 6. In Bean Class, enter: psdi.webclient.beans.item.ChildrenItemStructBean 7. Save the change --- APAR #: IZ81455 Issues(s): 10-16912 Description: In the Changes application, you can edit the Description field on the Related Work Orders tab of MOC Requests. Database Scripts: N/A Manual Changes: The fix requires presentation changes in the change.xml file: 1. In Application Designer, retrieve the CHANGE application. 2. Export the change.xml file and save it to your computer. 3. From the change.xml file, search for
with 5. Search for with 7. Save the file and import it to Maximo by using Application Designer. --- APAR #: IZ86213 Issue(s): 10-18697 Description: In the Issues and Transfers application, if you create an Item Material Requisition with 500 line items, a Stay Alive message is required. Database Scripts: N/A Manual Changes: This is only necessary if you issue large numbers of items in Issues and Transfers and would like to have the Long Operation(Please Wait) instead of hour glass upon clicking of the save icon. The long op will prevent the browser time-out problem. 1. Go to System Properties application. 2. In Global Properties, filter mxe.app.invissue.doLongOpOnSAVE 3. Expand the table window row, and in Global Value field, change value 0 to 1. Save the change. 4. Select the record and then click Select Action Live Refresh. 5. Live Refresh opens with the property. Please click OK. 6. The above 5 steps will launch long operation(Please Wait) when you click SAVE in Issues and Transfers. ***Note: if you decide to turn it back to hour glass, repeat steps 1-5 but change Global Value from 1 to 0. --- APAR #: IZ86382 Issues(s): 10-18808 Description: In the Assets application, when you select the "Select Value" option from the menu options of the filter, the select value dialog box does not open. Database Scripts: N/A Manual Changes: The fix requires presentation changes in the library.xml file: 1. Open the library.xml under resources\presentations\system. 2. Search for lookup_usercust. Go to the end of this element right after where it says and enter the following
3. Save the file and import it to Maximo by using Application Designer. --- APAR: IZ87029 Issue(s): 10-19214 Description: In the Inventory application, on the 'Where Used' tab, if you add an asset from a site diffent than the site of the current inventory record, this asset disappear after you save the record. Database Scripts: HF7117_16.dbc Manual Changes: If the 'Site' attribute is not already on the 'Where Used' tab's 'Used On' table window in the Inventory application (it may have already been added as part of a previous hot fix), you should add it via the following steps: 1. Open the Inventory application's presentation in Application Designer. 2. Export the Inventory application to inventor.xml. Save this export in a location where you can edit it. 3. Open the just-saved inventor.xml in a text editor. 4. Search for the following table control: 5. Within the tablebody control of the whereused_item_table, add a new tablecol that binds to the WHEREUSED.SITEID attribute. In the following example, the new column is identified by id "whereused_item_table_tablebody_IZ87121_siteid":
6. Within the tabledetails control of the whereused_item_table, add a new textbox that binds to the WHEREUSED.SITEID attribute. In the following example, the new textbox is identified by id "whereused_item_table_1_grid3_IZ87121_siteid":
7. Save these changes. 8. Open the Inventory application's presentation in Application Designer. 9. Import the modified inventor.xml. --- APAR #: IZ87518 Issue(s): 10-19482 Description: Correct deletion of WFNotification records when a process revision is deleted. Database Scripts: HF7117_14 Manual Changes: Run script to clean up the WFNotification table. -- APAR #: IZ85477 Issues(s): 10-18356 Description: In the Invoice application, you cannot modify a record that has the type of SCHED. Database Scripts: N/A Manual Changes: Manual Steps to be followed by the user to correct a paid Invoice of type "SCHED" 1. User Duplicates the Invoice in "SCHED" status that needs to be corrected 2. Changes the invoice type to "CREDIT" and enters the original Invoice Number 3. Saves and approves/pays the Credit Invoice 4. Create a new Invoice by duplicating the original "SCHED" Invoice and user may optionally change the Due Date 5. Saves and approves/pays the new Invoice created in Step 4. --- APAR: IZ68992 Issue(s): 10-10681 Description: In the Report Administration application, the wrong current balance value is displayed in the inventory balance report. Database Scripts: N/A Manual Changes: Reimport INVENTORY/inventory_balance_tbl.rptdesign --- APAR: IZ90425 Issue(s): 10-20788 Description: In the Routes application, you cannot select a value after filtering for results. Database Scripts: N/A Manual Changes: 1. Open up lookups.xml under resources\presentations\system 2. Search for
tag)
4. Import the lookups.xml file using Application Designer. 5. Open up routes.xml under resources\presentations 6. Search for tag)
8. Import the routes.xml file using Application Designer. --- APAR #: IZ89968 Issues(s): 10-20561 Description: In the Work Order application, the tasks and the taskid in the plans tab do not match. Database Scripts: N/A Manual Changes: Please change the xml files and import them using Application Designer File: resources/presentations/wotrack.xml 1) Search for 3) Search for 5) Search for
In the files resources/presentations/change.xml and release.xml search for the above tags and make the same changes. --- APAR: IZ88552 Issue(s): 10-19771 Description: In the Email Listener, you cannot attach .msg files. Database Scripts: N/A Manual Changes: Two new properties are being used in the code, however they are not required unless you do not want to use the default values. In that case, add these properties using the System Properties applicaiton: mxe.listener.rfc822extension: ALN type, default is null; File extension of the msg file downloaded mxe.listener.rfc822depth: INTEGER type, default is 3; The number of levels to go to retrieve attachments from msg file. --- APAR: IZ91317 Issue(s): 10-21306/IZ91317 dup of 10-16204 Description: The translations for 7110 , or 7114, and 7117 are different. Therefore, synonymdomain.value and related tables do not match after upgrade. Database Scripts: N/A Manual Changes: Fix the domains by running the TDToolkit, fix is German specific and a one time fix. 1. Install hotfix. 2. Backup tools\maximo\de\xliff 3. Remove all files but SYNONYMDOMAIN.xliff, SYNONYMDOMAIN_0001.xliff, SYNONYMDOMAIN_0002.xliff and ALNDOMAIN.xliff. 4. Make sure MXServer is stopped. 5. Run the TDToolkit. Open a command prompt @ tools\maximo tools\maximo>TDToolkit.bat -import -tlde 6. Restore files under tools\maximo\de\xliff 7. Start MXServer. --- APAR #: IZ91297 Issue(s): 10-21270 Description: In TAMIT, if you accidentally clear the error xml files from the system, TAMIT does not recover the error files from the JMS error queue. Database Scripts: N/A Manual Changes: A new system property, "mxe.int.ignoreerrorfile" will need to be created and set with a value of 1. --- APAR #: IZ90453 Issues(s): 10-20848 Description: When you open an application, you can set a time and a date to results. If you download these result sets to Excel, the date and time format changes to the American format even if you specified another language to your Maximo profile. Database Scripts: N/A Manual Changes: Set webclient.downloaddatetimeastext=true in webclient.properties file. The default is false, in which case the data will be downloaded in date format. It will always display in US format, however a date format can be easily changed to a different locale format within Excel. If the property is set to true, it downloads everything as text in the format it appears in the table. --- APAR #: IZ90544 Issues(s): 10-20884 Reworked in HF010 Description: In Rpt: Harrier Reports, the cost by system report does not always sum the costs correctly. Database Scripts: N/A Manual Changes: Recopy script library classes to BIRT environment in order to run this report in the designer --- APAR: IZ88083 Issue(s): 10-19627 Description: If you add a classification to the Classification Catalog, the performance of all applications slows down. Database Scripts: HF7117_21.dbc Manual Changes: Run the database script HF7117_21.dbc --- APAR #: IZ95405 Issues(s): 11-11701 Description: If you add a Malay locale to the system, you and the other users assigned to this locaçe cannot log in unless you restart the MXServer. Database Scripts: N/A Manual Changes: ms_MY is not supported by JDK 5, so the datetime format as expected by the customer won't be there automatically. However, there is a workaround to this: Go to System Properties app, and add the property ssetting.DISPLAYDATE_MS, and set its value to dd/M/yyyy. Live refresh. --- APAR #: IZ96112 Issues(s): 11-12116 Description: In the Service Requests application, you cannot order the classification in the Classify dialog. Database Scripts: N/A Manual Changes: This change supports the order-by in the Classify dialog. Out-of-box, it is still ordered by Classificationid. If the user does not need to order the Classify tree differently, please do not make any changes. If the user would like to order classify views by, for example "description", they can do the following change: 1. In Application Designer, Export the system library.xml 2. Find the "Classify" dialog, for example: dialog id="associateClassification" label="Classify" 3. Put orderby in the same line in tree mboname="CLASSSTRUCTURE", for example: 4. If user uses orderby "description", it is recommended that they also put description field in the tree. 5. In Application Designer, import the modify library.xml back. --- APAR #: IZ99159 Issue(s): 11-13412/IZ99159 dup of 10-19145 Description: In the Incidents application, you can save a Ticket even if the actual start date is later than the finish date. Database Scripts: HF7117_25.dbc Manual Changes: Please run the following insert statement against your database to complete the messages insert. Note: For the msgid column please use the next available BMXAAE delete from maxmessages where msggroup='ticket' and msgkey= 'invaliddate'; insert into maxmessages(msgkey, msggroup,value,displaymethod,options,msgid,prefix,maxmessagesid) values('invaliddate', 'ticket', 'The Actual/Target finish date must be greater than the Actual/Target start date.', 'MSGBOX', 2, 'BMXAAE',1,maxmessagesseq.nextval) ; commit; --- APAR #: IV01986 Issue(s): 11-14406 Description: In Desktop Requisitions, if you remove a material line, add a new material line and approve the record, the PR for the line that was removed is not deleted. Database Scripts: N/A Manual Changes: Please run the following insert statement against your database to complete the messages insert. Note: For the msgid column please use the next available BMXAAE delete from maxmessages where msggroup='mr' and msgkey= 'deletelineprexists'; insert into maxmessages(msgkey, msggroup,value,displaymethod,options,msgid,prefix,maxmessagesid) values('deletelineprexists', 'mr', 'Line item cannot be deleted since associated purchase requisition {0} exists.', 'MSGBOX', 2, 'BMXAAE',1,maxmessagesseq.nextval) ; delete from maxmessages where msggroup='mr' and msgkey= 'deletelinepoexists'; insert into maxmessages(msgkey, msggroup,value,displaymethod,options,msgid,prefix,maxmessagesid) values('deletelinepoexists', 'mr', 'Line item cannot be deleted since associated purchase order {0} exists.', 'MSGBOX', 2, 'BMXAAE',1,maxmessagesseq.nextval) ; commit; --- APAR #: IV02646 Issues(s): 11-14616 Description: In the Bulletin Board, when you try to perform a "Delete the expired bulletin messages", only the status records are deleted. Database Scripts: N/A Manual Changes: If you wish to have expired BULLETINBOARD records removed by escalation ESCESCBLTNEXP, you need to add a new system property from System Properties app, name it "mxe.crontask.deleteBB", type YORN, and set it to 1. By default this property doesn't exist, and expired BULLETINBOARD records are not removed. --- APAR #: IV05190 Issues(s): 11-15335 Description: In Job Plans application, the Meter lookup in the Job Plan Tasks table window shows the same meter multiple times if the meter is used on more than one measure point. Database Scripts: N/A Manual Changes: The fix requires presentation changes in the jobplan.xml file: 1. In Application Designer, retrieve the Job Plans application. 2. Export the application to jobplan.xml and save it to your computer. 3. In the jobplan.xml file, search for textbox id="main_jpop_table_1_grid6_2". 4. Replace the entire text box with 5. Save the change and import the modified jobplan.xml into Maximo by using Application Designer. --- APAR #: IV07481 Issues(s): 11-15852 Description: NOT ABLE TO FILTER IN VIEW REQUISITIONS APPLICATION Database Scripts: N/A Manual Changes: The fix requires a presentation change in the following files: -viewdr.xml -viewdrft.xml -viewtmpl.xml In all the files - Search for: Replace with: --- APAR #: IV39515 Description: Clickjacking risk from HTTP response header that does not include X-Frame-Options field. Manual Changes: 1) Open deployment descriptor (applications\maximo\maximouiweb\webmodule\WEB-INF\web.xml) with text editor. 2) Add the following filter and filter-mapping sections: HttpXFrameOptionsFilter psdi.webclient.system.filter.HttpXFrameOptionsFilter X-Frame-Options SAMEORIGIN HttpXFrameOptionsFilter /* 3) Save file. 4) Build and redeploy ear file. --- APAR #: IV40060 Description: Basic reflected javascript injection. Manual Changes: 1) Open deployment descriptor (applications\maximo\maximouiweb\webmodule\WEB-INF\web.xml) with text editor. 2) Add or uncomment the following filter and filter-mapping sections: HttpCrossSiteScriptingSecurity psdi.webclient.system.filter.HttpCrossSiteScriptingSecurity script script HttpCrossSiteScriptingSecurity /webclient/utility/* 3) Save file. 4) Build and redeploy ear file. --- APAR #: Information disclosure Description: Information disclosure. Manual Changes: Add following to applications\maximo\maximouiweb\webmodule\WEB-INF\web.xml ReportRequestFilter com.ibm.tivoli.maximo.report.birt.servlet.ReportRequestFilter ReportRequestFilter /report/* ReportRequestFilter /download/* ReportRequestFilter /output/* ReportRequestFilter /extract/* --- ==================================================================================================== IV. Issues Resolved ==================================================================================================== --- APAR #: N/A Issue(s): 10-13381 dup of 10-15428 Description: The Go to menu opens in the wrong direction causing a cropping of menu labels. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-14070 Description: In Workflow, clearing a task fails with missing relationship error. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-20934/IZ90673 is dup of 10-14117 Description: In the Changes application, when you duplicate a change record, the multiassetlocci table is not duplicated. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-14354 Description: Dojo version 1.4.3 build 20100519 is needed. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-14355 Description: The fix for dojo_library.js is not needed anymore. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-14504 Description: When you open the Select Action or Details menus for Authorized CI or Actual CI Applications, the menu items for launching in to the CI Apps are included. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-14707 Description: Set BiDirectional is based on user language. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-14865 Description: The delete button in the Offerings application is truncated. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 10-14866 Description: In Arabic, the reading order is Left to Right and the logout title bar is not mirrored. Database Scripts: N/A Manual Changes: --- APAR #: N/A Issue(s): 10-15558 dup of 10-14959 Description: The system property "PMBBISTRACKED" is not working as it should. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15156 Description: The hover help of the toolbar links are not displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15225 Description: The Changes tab does not move the focus from the last control. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15240 Description: Alter Table rather than rebuild table whenever possible. Rebuilding table means creating a backup table, and backup tables can cause downstream problems. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15242 Description: The PMAncestor/WOAncestor HasChildren flag must be 0 or 1. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15374 Description: After installing CCMDB, the layout of Startup Center will be displayed incorrectly. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15383 Description: Strange UI behavior when starting field level menus. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15384 Description: Running the longevity test fails. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15434 Description: When you click the incidents link, it takes more than 5 seconds to open. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15440 Description: On the Work flow Help dialog box, the icons are displayed incorrectly. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15478 Description: Workflow NodeType has a domain and should not be marked localizable. Database Scripts: HF7117_03.dbc Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15490 Description: Use silverlight as the gfx renderer for Internet Explorer. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15525 Description: Applet loading message is not being displayed on the Change and Release application. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15564 Description: You cannot change the status of a work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15590 Description: The Welcome string is missing on the Start Center. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15613 Description: Executing the ITIL WF process fails with exception. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15664 Description: Sql error "missing expression" with collection restriction. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15663 Description: The "BMXAA2319E: Cannot add a row" error message appears behind the configure condition properties panel. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15918 Description: When performing a reconciliation, a message such as 'BMSAA5111E: Attribute WONUM is not valid for filter type' may appear. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-16198 Description: On a Customer Database (CSX) When upgrading the database memory dump from 7115 to CCMDB 7.2.1, Updatedb fails on the first package being upgrade (base). Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-16688 Description: The Dojo locale for the T, ZH, and ZHT languages is not set. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-16204 Dup of 10-21306/IZ91317 Description: After you upgrade CCMDB V7.1.1.6 to V7.2.1, the CTGIN2252W message is displayed. However, if you ignore this message and finish the installation, you cannot log in the Maximo web console. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-15158 Description: A new entry point for Oracle Adapter 6.2.4 must be created in UpgPoints.xml. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-16649 Description: The Service Request filter is not working properly. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-16162 Description: On the Integrity Checker, the autokey for the PLUSPBILLBATCH.BILLBATCHNUM column does not exist. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-16118 Description: The dialogs on iPad are not resizing correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-16899 Description: Dialogs on Android sometimes appear outside of the area viewable on screen Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 10-17189 Description: If you click the Traditional Chinese button on the Start Center, the Simplified Chinese button is highlighted, and Simplified Chinese is used when you log in. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 10-17628 Description: Remove Before Class System out println. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 10-17854 Description: Validation must allow for oracle adapter hotfix maxvar DBOA11ILA001. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 10-18372 Description: In Configuration Items (Authorized), an error occurs in the save step after two days of running a long test. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-18554 Description: Follow up issue for fix to 10-17174, AutoKey logic needs to be reworked. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 10-17269 Description: Updatedb supports merging presentation using extendpresentation. However, it does not merge translated labels. Database Scripts: N/A Manual Changes: N/A --- APAR #: Issues(s): 10-18893 Description: If you use Firefox, the Line Type menu on the Materials tab is not displayed correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 09-18390 Description: MS-SQL Activating CIType Fails with Null Pointer exception. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 10-19066 Description: When you execute MSAD config using a Quick Config application, a warning message is shown and, in this message, there are some visible HTML tags. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 10-15291 Description: When you upgrade from Maximo 6.2.6 with Service Provider 6.1.2, and a japanese database, to 7117 with SP7112, the process completes successfully. However, the deployment on BEA Weblogic fails and the following fatal error occurs: "BMXAA6473E - Maximo failed to start. psdi.util.MXSystemException: system#major" Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-18471 Database Scripts: N/A Description: Maximo Everyplace 7.1.1 support for servers using LDAP is cumbersome. Manual Changes: N/A --- APAR #: N/A Issue(s): 10-19282 Database Scripts: N/A Description: In Maximo Every Place 7.1 and 7.1.1, the Pinch to zoom feature is not working. Manual Changes: N/A --- APAR #: N/A Issue(s): 10-19440 Description: In Migration Manager, when you try to create a package, the "Entered value $AUTOKEY$ is not a valid integer" error message is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-19705 Database Scripts: N/A Description: The Mobile Combobox does not work properly on a QBE field Manual Changes: N/A --- APAR #: N/A Issues(s): 10-19768 Description: When you try to upgrade the SQL Server, the upgrade fails with Spatial: Exception for file V600_06.sqs Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-20975 Description: Unbound date parameters are not correctly adjusted for user's time zone Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-20605 Description: In the Item Master application, if you work in an environment with multiple organizations, you cannot set a different default vendor for an item in each organization. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 10-20868 Description: An unknown error when changing modify location of a rotating asset Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-10283 Description: If you use DB2, after you upgrade from Maximo 6, the following message is displayed when you run IC on report mode: "The Maximo definition of this column does not match the actual column." Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 11-10045 Description: The following error occurs after you run Integrity Checker: "BMXAA0538E - This column is mapped to an AutoKey but the AutoKey does not exist. Column AUTOSCRIPT.AUTOSCRIPT AutoKey". Database Scripts: HF7117_20.dbc Manual Changes: N/A --- APAR #: N/A Issue(s): 10-20181 Description: When an exception happens in the UpdateDB, the last good line is not recorded within a script and you have to restore the database and start the UpdateDB again from the beginning. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 11-11060 Description: When you try to create a script on the UpdateDB in DB2, an error occurs and tables are not created. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 09-16920 Description: If you upgrade the language package from 6 to 7 and you use French, some values do not find a match in the DomainId. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 11-11631 Description: If you use DB2 and you run the Integrity Checker of Maximo 7.5 against the 7.1.1.7 version, some errors occur and you cannot complete the Integrity Checker. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 10-15485 Description: When you update a German DB2 Maximo 6.2.6/Transportation 6.3.1 to Maximo 7.1.1.7/Transportation 7.1.1, you cannot see the TABDISPLAY with the list of applications in the Go To menu. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 11-12434 Description: After you upgrade from Maximo 6 to Maximo 7, if you run UpdateDB, an error occurs and the update fails. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 11-12534 Description: Land in Context to details tab: difference between 7115 and 7117 Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 11-11675 Description: When the upgrade user interface is opened and you try to upgrade Maximo 6.2.7 to Maximo 7.1.1.8 using a 7.1.1.8 hotfix, an error occurs during the validation and the following message is displayed: "BMXAA0443E - ERROR -- BMXAA6236E - The company type value cannot be null in the UpgCompTypeI.xml file. Please update the file with a company type value and rerun validation." Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 11-12815 Description: If your Login ID contains an apostrophe symbol, you cannot login. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 11-13502, 11-13327 Description: Support DB2 version 9.1 in DBChange, part of UpdateDB. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 10-19828 Description: Fixed error inserting into MaxVars, SQLServer only. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 11-12163 Description: Fix IntegrityChecker to handle nonpersistent columns with invalid search types. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issue(s): 11-12956 Description:Labor End Date Calculated Incorrectly When User Blanks Out End Date and System Repopulates the Field Database Scripts: N/A Manual Changes: N/A --- --- =============================================================================================== Begin HF001 ( MBS_7117_LAFIX.20100720-1252.psi.zip) ============================================================================================== -------- -------- --- APAR #: IZ75947 Issue(s): 10-14126 Description: In Database Configuration, if you increase the purchase contract line unit cost decimal scale from two to five, specify the unit cost in the purchase contract, and then tab out of the field, the unit cost is rounded. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ76293 Issue(s): 10-14373 Description: In the Receiving application, when you receive a rotating asset from an internal storeroom to a storeroom PO across sites and the assetnum exists in both the source and destination stores, the Asset.Moved flag is not updated correctly. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ75982 Issue(s): 10-14123 Description: In the Inventory application, When you try to change the status of a rotating item with balance of zero to OBSOLETE, the following error message is displayed: "BMXAA2115E - Cannot change status. Item is attached to one or more assets at the inventory level." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76010 Issue(s): 10-14162 Description: If you add the GLACCOUNT field as an additional column on the list screen add, specify the lookup in the Control Properties for this Table Column as GLNAVIGATOR, you cannot use the GLNAVIGATOR lookup on the List screen. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77089 Issue(s): 10-15018 Description: In the Locations application, when you apply an Item Assembly Structure, the current item filed is incorrectly populated. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ76436 Issue(s): 10-14506 Description: In Advanced Search, when you search for attributes, the records predefined in the ALNDOMAIN value list are not displayed. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ76245 Issue(s): 10-14337 Description: In the Reorder application, if the order unit on the most recent vendor record is different from the order unit on the inventory item record, the conversion factor is ignored. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ75039 Issue(s): 10-13293 Description: In the Work Order Tracking application, when you use the application link to select a value for the contract field and you return with the value, you are able to return the value of contracts that are not currently active. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ76113 Issue(s): 10-14282 Description: If you create two classifications with the same name, but one to be used with a location and the other to be used with assets, classify a new asset with this classification and tab out of the Classifiction field, the following error message is displayed: "BMXAA0184E - The classification XXXXX cannot be used for ASSET." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76902 Issue(s): 10-14906 Description: In the Work Order application, when you try to move, swap or modify an asset using the Select Action menu, the numeric value on the Planned Modifications section is displayed with ".00000000" after the number. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ76239 Issue(s): 10-14324 Description: In the Request for Quotation Application, when you duplicate an RFQ service line, the item field is set as required Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ76103 Issue(s): 10-14246 Description: In Application Designer, if you export the REPLIBRARY.xml file, save and reimport the file without making any changes, go to the Asset application and run a report, the following error message is displayed: "BMXAA4210E - Database error number 920 has occurred." Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ76259 Issue(s): 10-14334 Description: When you run a report, the Scheduled reports create crontask threads that are not cleared. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ64841 Issue(s): 09-21744 Description: In the long description field, when you use "<>" the characters entered after "<" and or between "<>" disappear. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ77322 Issue(s): 10-15114 Description: In the Item application, if you use a synonym for an Item Status, the following error occurs: "BMXAA2108E - cannot change the status to the same status at Item level." Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ75878 Issue(s): 10-14081 Description: In the Desktop Requisitions application, when you are creating a requisition, if you enter a GL account, click Continue and try to add a line item by searching a catalog, the catalog screen appears as blank. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ76659 Issue(s): 10-14651 Description: When LDAP is enabled, the following error message is displayed when you try to sign in: "BMXAA3840E - The electronic signature entered is not valid for the user currently signed in to the application." Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ74721 Issue(s): 10-12809 Description: In Work Order Tracking application in the Multiple Assets,Locations and CIs section of the main tab, the sequence is not maintained in ascending order when you select records from using the 'From Routes' option. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ77075 Issue(s): 10-15020 Description: When you run UpdateDB, the following error occurs: "add_attributes statement requires a value for attribute object." Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ75582 Issue(s): 10-13787 Description: If you disable the Undo Approval of Purchase Order security option, you cannot change the status of a PO to a synonym of the WAPPR status. Database Scripts: HF7117_02.dbc Manual Changes: N/A --- APAR #: IZ76197 Issue(s): 10-14300 Description: When the storage information is null, the PSDI.CONFIGURE.UTIL.GETSTORAGECLAUSE() method creates an invalid where clause. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ76260 Issue(s): 10-14361 Description: Email Listener is not correctly processing autogenerated emails from termination notices. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76576 Issue(s): 10-14544 Description: If Email Listener fails to process an email, an email with the errors is sent back to the user. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76937 Issue(s): 10-14939 Description: In the Changes application, when you try to mass move assets that belong to different sites, the following error message is displayed: "BMXAA4565E: Work order XXXXX is not a valid open work order." Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ77553 Issue(s): 10-15247 Description: In the Purchase Requisitions Application, when you duplicate a closed PR, the tax calculation is not updated. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ77295 Issue(s): 10-15078 Description: Migration Manager fails to import packages that include indexes. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ75833 Issues(s): 10-14040 Description: In the Item application, when you create a work order plan, you can add an item that has a status of PENDOBS to the direct issue line. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ75766 Issues(s): 10-13943 Description: The NullPointerException thrown from BBSet.searchBBMsgStatusSet() appear endlessly, affecting the performance of the system. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ75875 Issues(s): 10-14079 Description: In the work order detail report, the asset location is displayed instead of the storeroom location for the actual material charges. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77693 Issues(s): 10-15350 Description: In Workflow Admin Console, when you try to reassign a task to a user that does not have an email address, the following error occurs: "BMXAA0259E - The email could not be sent. No recipient addresses." However, the task is reassigned to this user. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ75859 Issue(s): 10-14050 Description: In the Preventive Maintenance application, when you generate a set of work orders from a complex PM, an "Exceeded Maximum Cursors" error occurs and the work orders are not generated. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ77721 Issues(s): 10-15364 Description: In the Assets application, the conditional expression for signature options is not working. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77003 Issues(s): 10-14990 Description: If you use Japanese as a base language and you modify the Description field of the Domain Application, the value ID is changed to Japanese characters. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77862 Issues(s): 10-15392 Description: When you launch the Service Requests application, the following error message is displayed: "BMXAA6173E - no template matches were found to be applied." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77720 Issues(s): 10-15362 Description: In the Purchase Contracts application, if you enter the managed payments of a contract and then approve this contract, you cannot revise the contract again. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76745 Issue(s): 10-14741 Description: When you attach a document to an email, the name of the attached file comes with the full directory path. Therefore, Email Listener throws an error because this directory structure does not exist. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76620 Issue(s): 10-14606 Description: In the Work Order application, when you create and approve a work order, and then go to the Actuals tab and add a row for a Special Order, the following error message is displayed: "BMXAA0274E - SPORDER is not a valid line type." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77917 Issue(s): 10-15424 Description: In the Receipts application, when you are receiving items, the conversion factor is not taken into account. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76689 Issue(s): 10-14653 Description: In the Work Order application, when the attributes for REPORTEDBYNAME are defined as uppercase in the xml, the View Tickets and WO dialog box displays undefined fields. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77641 Issue(s): 10-15301 Description: In the Inventory application, you cannot make an item obsolete at one site if the item number is being used by an open work order or job plan in another site. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ78082 Issue(s): 10-15514 Description: In the Purchase Requisitions application, when you duplicate a PR, the PRLINENUMS are also duplicated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77733 Issue(s): 10-15366 Description: In the Invoice application, the CONTRACTAUTH lookup does not work on list tab or search more. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77417 Issue(s): 10-15139 Description: In the Work Order application of Maximo Mobile, when you modify an asset that belongs to work order and then send the record back to Maximo, the GL account is not updated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ75948 Issue(s): 10-14124 Description: In the Purchase Contracts application, on Advanced Search, when you use the Select Value action on the Item field, no items are displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ78156 Issue(s): 10-15558/IZ78156 dup of 10-14959 Description: The "PMBBISTRACKED" system property is not working as expected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76581 Issue(s): 10-14540 Description: In the Person Group application, when you add a PersonGroupTeam record to the People table window, an unqualified SQL statement is issued against the Person table when you set the RespPartyGroup attribute. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ78072 Issue(s): 10-15502 Description: When you clone the Service Requests application, the route workflow toolbar button does not appear on the cloned application. Database Scripts: HF7117_04.dbc Manual Changes: N/A --- APAR #: IZ76733 Issue(s): 10-14742 Description: When processing emails, the INBOUNDCOMM object builds up and causes an out of memory error. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76753 Issue(s): 10-14740 Description: In the Routes application, if you click an entry on the multi-asset, location and CI table of a work order, the following error occurs: "BMXAA0019E - Field Job Plan is read-only." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76782 Issue(s): 10-14819 Description: In the Work Order application, when you search by scheduled start date, you receive incorrect results. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77149 Issue(s): 10-15072 Description: In the Assets application, after you apply the latest hot fix for 7.1.1.4, the Go to Item Master option no longer works. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76947 Issue(s): 10-14953 Dup of 10-14210 Description: When you create and save a Service Request, and then create a communication using a Communication Template, if you include an invalid email address in the To field, the email is not sent to any of the receivers and an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77524 Issue(s): 10-15210 Description: In the Labor Reporting application, when you select a value for the Labor field, the Select Value dialog box is displayed full of invalid biding fields. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ78500 Issues(s): 10-15812 Description: When you use the Classify dialog box to select a classification, no query results are displayed in the log. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76618 Issue(s): 10-14605 Description: In Desktop Requisitions, when you add a requisition line and specify the description, quantity and order unit fields, the following error occurs: "BMXAA5609I - This action is not allowed since the item XXXX is in Pending or Obsolete status at Item/Organization level." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ78318 Issue(s): 10-15700 Description: If you have read-only privilege to PM and WOGEN, you cannot generate work orders based on meters. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ78531 Issue(s): 10-15826 Description: In the Changes application, if an asset has a user/custodian relationship, you cannot cross move this item to a site and then move the asset back to the original site. Database Scripts: N/A Manual Changes: N/A --- Issue(s): 10-16048 Description: Attributes are not being displayed under the asset specification in the move/swap/modify dialog box of the Work Order application. Database Scripts: N/A Manual Changes: Please refer to the Manual Changes section for this Issue/APAR. --- APAR #: IZ74302 Issue(s): 10-12603 Description: The work order detailed report does not show the items on the planner material tab that have no itemnum. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80008 Issue(s): 10-16073 Description: You cannot change the status of a work order. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ78530 Issues(s): 10-15810 Description: In the Job Plans application, When you try to search for Asset Description, Location Description or Item Description using the More Search fields dialog box, the following error occurs:" BMXAA4185E - Cannot query on field ASSETDESCRIPTION." Database Scripts: N/A Manual Changes: Refer to the Manual Changes section for this issue/APAR. --- APAR #: IZ79115 Issue(s): 10-15909 Description: Even though you specified an application in Data Restriction, this application still appears in the Classification Hierarchy. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ80090 Issue(s): 10-16141 Description: You must run updatedb twice to have the correct byte code for some classes. Database Scripts: N/A Manual Changes : N/A -------- -------- ============================================================================================== End HF001 ( MBS_7117_LAFIX.20100720-1252.psi.zip) ============================================================================================== -------- -------- ============================================================================================== Begin HF002 (MBS_7117_LAFIX.20100726-2216.psi.zip) ============================================================================================== -------- -------- --- APAR #: IZ77498 Issue(s): 10-15208 Description: In Desktop Requisition, when you create a service requisition for a material or a service, the values for assetnum, location, and gldebitacct are not populated in MRLINE. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ77384 Issue(s): 10-15135 Description: You cannot use HADR because the CLOB/BLOB columns are built incorrectly. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ77629 Issue(s): 10-15305 Description: In the Receiving application, if you receive a PO that has the same item in multiple PO Lines, the average cost is incorrectly calculated. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ80184 Issue(s): 10-16231 Description: In the Classification application, in Advanced Search, you cannot filter for Class Structure. Database Scripts: N/A Manual Changes : N/A -------- -------- ============================================================================================== End HF002 (MBS_7117_LAFIX.20100726-2216.psi.zip ============================================================================================== -------- -------- ============================================================================================== Begin HF003 (MBS_7117_LAFIX.20100730-1217.psi.zip) ============================================================================================== -------- -------- --- APAR #: IZ76379 Issue(s): 10-14464 Description: In the Asset application, if you configure LOCOPER.FLO5 as maxtype YORN, the following error occurs when you create a work order: "BMXAA4195E - Required field XXXXX is blank." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ78660 Issue(s): 10-15845 Description: In the Issues and Transfer application, if you create an internal PO to transfer items from one organization to another using a courier, the credit GL Account ot the transfer in transaction is incorrect. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80086 Issue(s): 10-16160 Description: If you clone a Work Order application that has multiple languages and display this cloned application using another language that is not English, the languages get mixed up. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ79225 Issue(s): 10-15972 Description: In the Issues and Transfer application. if you are performing an internal transfer between organizations that use different currencies, the exchange rate is not used. Database Scripts: N/A Manual Changes: N/A -------- -------- ============================================================================================== End HF003 (MBS_7117_LAFIX.20100730-1217.psi.zip) ============================================================================================== -------- -------- ============================================================================================== Begin HF004 (MBS_7117_LAFIX.20100812-1632.psi.zip) ============================================================================================== -------- -------- --- APAR #: IZ80867 Issue(s): 10-16477 Description: In Domains, if you filter for a status and then click the trash bin icon, the following error occurs: "BMXAA4052E - You can only delete synonym values." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80533 Issue(s): 10-16395 Description: In the Purchase Orders application, when you are creating a record, you can select disqualified vendors without receiving an error message. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80473 Issue(s): 10-16344 Description: In the Inventory application, when you reorder an item, the contract is taken in consideration even if the "Consider Contracts When Creating PRs/POs?=NO" option is selected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77652 Issue(s): 10-15320 Description:In the Locations application, if you specify a value for the Memo field greater than the database length, an error occurs as expected. However, when you click the OK button to close the error message, the dialog box is displayed again and keeps being displayed until you close the browser. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80925 Issue(s): 10-16522 Description: In the Warranty Contract application, if you create or duplicate a contract with more than one contract line, approve this contract, filter the contract line, and then revise the contract, only the contract for the first line is created. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76627 Issue(s): 10-14604 Description: In the Workflow application, incident records do not fully exit from Workflow even though Workflow History shows that the incident record reached the Stop node. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77636 Issue(s): 10-15309 Description: In the Inventory application, if you modify the query function of the Rotating Assets tab according to the instructions on the Application Designer Guide, no records are displayed when you query for result. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80233 Issue(s): 10-16243 Description: In the Work Order application, queries done on Chart of Account do not use an index. Database Scripts: N/A Manual Changes: Refer to the Manual changes section for this Issue/APAR. --- APAR #: IZ80247 Issue(s): 10-16296 Description: The performance of the Job Plan application is being affected by errors FldFlowControlled.class and FldSuspendFlow.class. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80218 Issue(s): 10-16236 Description: In the Work Order application, when you reserve rotating items against a work order, and then select the same items on Select Materials, the following error occurs: "BMXAA4200E - Record has been updated by another user. Refetch and try again." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77409 Issue(s): 10-15143 Description: In Workflow, after you receive and close a system message, the work order close a ction is not performed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77445 Issue(s): 10-15191 Description: After upgrading your database, if you delete a spreadsheet report from the Report Administration application, you cannot run a report. Also if the server is restarted you cannot log in back. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77247 Issue(s): 10-15069 Description: In the Reorder application, on Preview reorder, you can modify the Unit Cost field after you associate a record with a contract item even though you set the 'Overwrite price' flag to false. Database Scripts: HF7117_07.dbc Manual Changes: N/A --- APAR #: IZ80219 Issue(s): 10-16239 Description: If you use the upgrade utility to upgrade your database from Maximo 6 to 7, the Integrity Checker does not handle MaxTable domains correctly and an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80243 Issue(s): 10-16297 Description: In Item Assembly Structures, if you use the 'Move To option' on the 'Belongs To' field to move an item with children associated to it, the Item Assembly Structure loses the top level. Database Scripts: N/A Manual Changes: Please refer to Manual Changes section for this Issue/APAR. --- APAR #: IZ76930 Issue(s): 10-14942 Description: If you modify the Start Center from an environment that uses a different language, and then go back to the original language, the start center are not displayed correctly. Database Scripts: HF7117_EN_001.dbc, HF7117_08.dbc Manual Changes: N/A --- APAR #: IZ81458 Issue(s): 10-16911 Description: In the Item application, you can type in an item number on the Find field and fetch this item even though this item belongs to a site that you do not have access to. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77635 Issue(s): 10-15308 Description: In the Invoice application, if you create a record and add scheduled payments, the invoices amounts do not match the scheduled amounts on the software contract. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80478 Issue(s): 10-16351 Description: After you run configDB and restart your system, the TLOAMCONTRACTASSET view fails. Database Scripts: N/A Manual Changes: -------- -------- ============================================================================================== End HF004 (MBS_7117_LAFIX.20100812-1632.psi.zip ============================================================================================== -------- -------- ============================================================================================== Begin HF005 (MBS_7117_LAFIX.20100917-1647.psi.zip) ============================================================================================== -------- -------- --- APAR #: IZ78367 Issue(s): 10-15709 Description: In the Desktop Requisition application, when you perform an Item Look Up, the results display obsolete items. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ78420 Issue(s): 10-15730 Description: In the Inventory application, if you select the 'Roll New Status to Organizations and Inventory?' Check box, and try to change the status of an item that exists in multiple organizations, and this item already has the status to which you are trying to change in one of the organizations, Maximo freezes. Database Scripts: N/A Manual Changes: --- APAR #: IZ81244 Issue(s): 10-16748 Description: In the Work Order application, if you create a child work order from a nested job plan, you cannot associate safety plans to this work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80954 Issue(s): 10-16523 Description: In the Work Order application of some Industry Solutions, if you use the Report Downtime dialog box, the work order numbers entered are not saved. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ79189 Issue(s): 10-15967 Description: In the Invoice application, if the inventory balance is 0, the average cost is not updated in the invoicetrans table. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ83013 Issue(s): 10-17223 Description: In the Purchase Orders application, if you do not have the security right to approve POs, you cannot approve a PO in workflow. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76366 Issue(s): 10-14459 Description: In the Assets application, when you enter a meter reading, work orders are generated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ75149 Issue(s): 10-13455 Description: In the Company application, you cannot set a synonym value as default for company types. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80808 Issue(s): 10-16478 Description: In the Locations application, when you try to change the status of a record, you receive he following error message: "cannot change status to the same status." However, the status is changed despite the message. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ75679 Issue(s): 10-13864 Description: In the Companies application, if you import the company master record, and then import a company record, the following error occurs: "BMXAA1408E - Company master XXXXX does not exist in set COMPSET1." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80225 Issue(s): 10-16237 Description: In the Start Center, the top-level query is running as a full select without conditions. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ83528 Issue(s): 10-17565 Description: In the Work Orders application, if you are creating a job plan with different tasks, and one of the task does not have a classification, the classification filed for this task is populated with the classification from another task. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ81315 Issue(s): 10-16824/IZ81315 dup of 10-18211/IZ85280 Description: If you set DISPLAYDATE to dd-MM-yyyy, you can no longer specify any date parameters using both your keyboard or the date lookup. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ60312 Issue(s): 09-18271 Description: When you are using your current location with UNC mapping without translations values, and you try to view an attachment, http is added as a prefix to the URL and the file cannot be displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ81233 Issue(s): 10-16721 Description: When you are setting the Admin Mode in a clustered environment, a null pointer exception occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ82938 Issues(s): 10-17170 Description: In the Work Order application, when a work order record is approved, the status is not checked and inventory reservations are created. If multiple requests are made by work order, the values on the quantity reserved or quantity available fields are incorrectly calculated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ20873 Issues(s): 08-15769 Description: In the Report Administration application, when you direct print a work order details report, there is a 30-second delay before the report is launched. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ81345 Issues(s): 10-16844 Description: In Rpt: AD Hoc Reports, when you try to create a QBR report from new ROS that have inherited relationships, an unknown error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ83002 Issue(s): 10-17176 Description: In The Issues and Transfers application, if you purchase a direct-use material against a work order, receive the material and load it with no storeroom specified, an error occurs when you try to apply a price agreement to the order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ82725 Issue(s): 10-17044 Description: In the Receiving application, if you reject part of the quantity of items received when you are changing the inspection status, the loaded cost is calculated for all received quantity and not for the accepted quantity. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76067 Issue(s): 10-14249 Description: In the Security Groups application, if you enable the login tracking, try to activate the Admin mode, and you specify the right user ID but wrong password in the displayed dialog box, the system freezes. However, if you exit the application and try to log in again, the following message is displayed: "user ID is blocked, please contact system administrator." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80504 Issue(s): 10-16361 Description: If you do not use submenu headers because you are not authorized to use submenus, Conditions and Sigoption can cause unexpected behavior if present in the Action menu. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ84702 Issues(s): 10-17980 Description: In the Service Request application, the Data Restriction for the Owner and the Owner Group dialog boxes do not work. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ84697 Issues(s): 10-17979 Description: In Workflow, if you enable workflow to clear Bulletin Board messages, and you try to activate the Admin Mode, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ82994 Issues(s): 10-17175 Description: In the Work Order application, if you complete a work order with planned Assets swap, the work order number is not tracked in the Asset transaction table. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80905 Issues(s): 10-16511 Description: In the Assets application, if you decommision a Location that is linked to a PM hierarchy, the following error message is displayed: "Record is being updated by another user." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ78661 Issue(s): 10-15846 Description: In the Inventory application, if no records are selected on the List tab, and you try to add Items to a Storeroom using the Select Action menu, the Item is added to all records on the List tab. Database Scripts: HF7117_09.sql, HF7117_09.class Manual Changes: --- APAR #: IZ84434 Issue(s): 10-17861 Description: In the Item Master application, if you try to move an IAS to a Location using the children table dialog box, and then try to apply this IAS to a Location, the new Location is created only for the top-level item. Database Scripts: N/A Manual Changes: Please refer to Manual Changes section for this Issue/APAR. --- APAR #: IZ83424 Issues(s): 10-17462 Description: If you create an Incident QBR report, schedule this report as recurring in the Submit tab, and try to change the email address list after the initial submission, the following error occurs: "BMXAA4176E - Attribute EMAILTO does not exist." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77359 Issues(s): 10-15123 Description: In the Issues and Transfer application, you cannot transfer a rotating asset from one site to another using an internal PO. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ83472 Issues(s): 10-17514/IZ83472 dup of 10-17434/IZ83271 Description: The port designated by property mxe.rmi.port to be used for RMI is not being used. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ82827 Issues(s): 10-17087 Description: In the Configurable Start Center, the descriptions of the querycolumn are not translated if you log in using a profile in a language other than English. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ84681 Issue(s): 10-17976/IZ84681 dup of 10-18090/IZ85036 Description: When you export a report, you are not prompted for a file name. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ85036 Issue(s): 10-18090 Description: If you save a Birt report or a QBR report as CSV, you are not prompted for a file name. Database Scripts: N/A Manual Changes: N/A -------- -------- ============================================================================================== End HF005 (MBS_7117_LAFIX.20100917-1647.psi.zip) ============================================================================================== -------- -------- ============================================================================================== Begin HF006 (MBS_7117_LAFIX.20101014-1718.psi.zip) ============================================================================================== -------- -------- --- APAR #: IZ82951 Issue(s): 10-17174 Description: In the Work Order application, if multiple users try to create work orders at the same time, the work order numbers are not generated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ79970 Issues(s): 10-16123 Description: In the Work Order application, if you delete a work plan, the children work orders are automatically deleted as well. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80089 Issues(s): 10-16172 Description: In the Labor application, the value you used to filter a query on a table window is not maintained when you scroll through the records. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80336 Issues(s): 10-16301 Description: In the Preventive Maintenance application, on the Children subtab of the PM Hierarchy tab, if you clear the PM Number of a child record, and the click the Delete icon, the following error occurs when you try to save the process: "BMXAA4195E - Required field PM Number is blank." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ81022 Issues(s): 10-16616 Description: In Rpt: Harrier Engine, you can display BIRT report in html, but you cannot print the reports in html. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ81330 Issue(s): 10-16827 Description: In the Invoice application, you can send invoices without PO reference to a closed work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ81388 Issues(s): 10-16869 Description: In the Invoice application, if you create a service PO with an empty Quantity field, an error occurs when you try to distribute the cost. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ81455 Issues(s): 10-16912 Description: In the Changes application, you can edit the Description field on the Related Work Orders tab of MOC Requests. Database Scripts: N/A Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR #: IZ82379 Issues(s): 10-17000 Description: When you try to transfer a rotating asset to another bin in the same storeroom, using the 'Move/Modify Assets' dialog box, the inventory balances are not correctly updated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ83242 Issue(s): 10-17356 Description: In the Work Order application, on the Actual tab, if you use Select Value to select the item number for the Material, the items displayed are not restricted to the OrgID and ItemSet from the originating work order. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ83507 Issues(s): 10-17567 Description: Sometimes, the rptdocument files of the reporttemp directory are not deleted. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ83648 Issues(s): 10-17640 Description: In the Issues and Transfers application, when you transfer a lotted time using courier, an ORA-00001: Unique constraint violated error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ83735 Issue(s): 10-17682 Description: In the Purchase Contracts application, if you try to approve a Purchase Contract, the following error occurs: "BMXAA3289E - The order amount exceed the purchasing limit." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ83954 Issue(s): 10-17717 Description: In Rpt: AD Hoc Reports, the time columns in QBR Reports display a date instead of a time value. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ84206 Issues(s): 10-17776 Description: In the Purchase Orders application, if you have a PO with multiple lines, and one of the lines has an item with the status of Pending Obsolete, you cannot approve this PO. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ84323 Issue(s): 10-17819 Description: In the Work Order application, after you apply hot fix 20100706-1031, the "Has Follow-up Work Flag" function does not work correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ84437 Issues(s): 10-17864 Description: In the receiving application, if you use autokey for ASSET.ASSETNUM, the Autonumber button does not work correctly if you receive two separate POs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ84536 Issues(s): 10-17893 Description: In the Reorders application, if you reorder items that have the unit cost set to five decimals, the unit cost of the PR created is rounded down. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ84912 Issue(s): 10-18046 Description: In the Classifications application, if you import a classification to a site using MIF, but this classification exists in the system, but to another site, the following error occurs: "BMXAA5591E the same classification hierarchy already exists." Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ85243 Issues(s): 10-18167 Description: If you use a Communication Template to send and receive emails for workflow assignments, the links in the body of the email are not formed correctly. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ85252 Issues(s): 10-18171 Description: In the Create Requisition application, if you use a synonym value for the STOREROOM location type, you cannot use the Select Value option to return with a value for the Item filed on the 'Requisition Line Items' tab. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ85262 Issues(s): 10-18212 Description: In the Deployed Assets application, if you use a secondary language, an invalid build occurs on the Software tab. Database Scripts: HF7117_10.dbc Manual Changes: N/A --- APAR #: IZ85263 Issues(s): 10-18214 Description: In Rpt: Harrier Engine, if you try to print a report with attachments, and the path name for the file contains spaces, the printing process fails. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ85278 Issue(s): 10-18217 Description: In the Purchase Requisitions application, if you set a low value in the mxe.db.lookupmaxrow property, the service items are not displayed. Database Scripts: HF7117_11.dbc Manual Changes: N/A --- APAR #: IZ85329 Issues(s): 10-18269 Description: In the Items application, if you use the standard web service, you cannot change the status of an item. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ85344 Issue(s): 10-18307 Description: If you use Service Provider, and you try to select a classification in the Service Request application, a blank screen is displayed and a database error occurs. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ85507 Issue(s): 10-18351 Description: In the Work Order application, if you attach several files to a Job Plan, and select more than one of these files to be carried over to the work order, only the first two files are attached to the work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ85679 Issue(s): 10-18401 Description: In the Classifications application, if you import many locations with classifications in a single Integration Framework Web Services message, a cursor leak occurs in LocationSpec.getClassSpecUseWith(). Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ85706 Issues(s): 10-18405 Description: In the Inventory application, the GL Credit Account field is set as read-only. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ86160 Issue(s): 10-18651 Description: In the Inventory application, if you create an item and specify a value for the balance field, and then create a quick report, using the same amount you specified as the balance on the quantity field of the materials subtab, the following error occurs: "BMXAA1892E - The balance in the bin will become negative as a result of this transaction." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ86187 Issues(s): 10-18657 Description: In the Warranty Contract application, if you filter a contract, and then duplicate this contract, the duplicated contract is created only with the lines that are displayed after filtering. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ86237 Issue(s): 10-18699 Description: In the Purchase Contracts applications, if you create a contract in one organization, and someone revises this contract in another organization, the contract can no longer be used because you cannot change the status on the revision. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ86323 Issues(s): 10-18803/IZ86323 dup of 10-18307 Description: In the Service Requests application, you cannot classify a record. Database Scripts: N/A Manual Changes : N/A -------- -------- ============================================================================================== End HF006 (MBS_7117_LAFIX.20101014-1718.psi.zip) ============================================================================================== -------- -------- ============================================================================================== Begin HF007 (MBS_7117_LAFIX.20101102-1438.psi.zip) ============================================================================================== -------- -------- --- APAR #: IZ81529 Issues(s): 10-16951 Description: In Migration Manager, if you use a locale in a language other than English, the database values are corrupted when you perform a migration. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ85368 Issue(s): 10-18279 Database Scripts: N/A Description: If the reportlookup.labeloverride column contains null values, the birthreportlabelloader script runs into an exception during upadatedb. Manual Changes: N/A --- APAR #: IZ85367 Issue(s): 10-18280 Description: In the Email Listener application, during smtp authentification, only one function works correctly. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ84837 Issue(s): 10-18008 Database Scripts: N/A Description: In the Work Order application, you can import new labors to closed work orders. Manual Changes: N/A --- APAR #: IZ83173 Issues(s): 10-17329 Description: If the "mxe.db.UseSiteListInQuery" property is enabled, you cannot run reports. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ85350 Issues(s): 10-18272 Description: In the Preventive Maintenance application, when you create a merter redings report, using the ALL meter avarage calculation method, the results can be negative average calculations. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ86213 Issue(s): 10-18697 Description: In the Issues and Transfers application, if you create an Item Material Requisition with 500 line items, a Stay Alive message is required. Database Scripts: HF7117_12.dbc Manual Changes: See the Manual Changes section. --- APAR #: IZ86382 Issue(s): 10-18808 Database Scripts: N/A Description: In the Assets application, when you select the "Select Value" option from the menu options of the filter, the select value dialog box does not open. Manual Changes: Make changes to library.xml. See the Manual Changes section. --- APAR #: IZ86155 Issue(s): 10-18650 Database Scripts: N/A Description: In the Work Order application, when you are routing a work orfer, duplicate unique IDs are created. Causing unique key errors. Manual Changes: N/A --- APAR #: IZ87042 Issue(s): 10-19220 Database Scripts: N/A Description: When you upgrade from Maximo Asset Management 6.2.5, an error occurs. Manual Changes: N/A --- APAR #: IZ81301 Issue(s): 10-16782 Database Scripts: N/A Description: You cannot create a toolbar button to launch a URL. Manual Changes: N/A --- APAR #: IZ85739 Issue(s): 10-18429 Database Scripts: N/A Description: In the Receipts application, when you are receiving items that require inspection, the loaded cost is not calcualted. Manual Changes: N/A --- APAR #: IZ80064 Issue(s): 10-16140 Database Scripts: N/A Description: In the Receipts applicarion, if you use a foreign currency, the Received Total Cost filed of the PO Line is incorrectly updated. Manual Changes: N/A --- APAR #: IZ76892 Issue(s): 10-14889 Database Scripts: N/A Description: The showcount property does not work. Manual Changes: N/A --- APAR #: IZ86593 Issue(s): 10-18913 Database Scripts: N/A Description: In the Work Orders application, if you enter meter readings in the multi asset location section, the meter readins are applied to the first asset in the List tab. Manual Changes: N/A --- APAR #: IZ86023 Issue(s): 10-18552 Database Scripts: N/A Description: In the Inventory application, when you try to do physical count adjustments, a long query is created. Also, if you have several inventory records, an error occurs. Manual Changes: N/A --- APAR #: IZ85044 Issue(s): 10-18101 Database Scripts: N/A Description: In the Work Order application, if you create a Task for a Work Order from a PM record, the Calculated Priority is incorrectly calculated. Manual Changes: N/A --- APAR #: IZ86257 Issue(s): 10-18789 Description: In Workflow Designer, a workflow assignment cannot be assigned in parallel. To implement parallel assignments, wfassignment.roleid was changed from being required to being not required. Database Scripts: HF7117_13 Manual Changes: N/A --- APAR #: IZ86282 Issue(s): 10-19114 Description: In the Service Requests application, if you create a SR from Quick Insert, the ticket template is not applied. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ87518 Issue(s): 10-19482 Description: Correct deletion of WFNotification records when a process revision is deleted. Database Scripts: HF7117_14 Manual Changes: See the manual changes section for this Issue/APAR. -------- -------- ============================================================================================== End HF007 (MBS_7117_LAFIX.20101102-1438.psi.zip) ============================================================================================== -------- -------- ============================================================================================== Begin HF008 (MBS_7117_LAFIX.20101214-1604.psi.zip) ============================================================================================== -------- -------- --- APAR #: IZ87754 Issue(s): 10-19572 Description: If Java 2 security is enabled, TAMIT does not work. Notes: This fix is going to addrress the Java 2 Security for 2 cases within the TPAE Platform for the code that we have control over: 1. The System.getProperties() call is removed. Code changed to set the properties explicitly with System.setProperty API 2. The RMI Registry creatiion and binding is now done through a RMI Socket Factory API, which limits the port to onfigured port instead of random port. Please also refer to issues issue# 10-17514 / 10-17434 which are related to the random port issues. Customers cannot assume that Java 2 security is fully supported with the fix. The Java 2 Security is supported with the foillowing limitations: 1. BIRT reporting has to be disabled changes to a) applications\maximo\mboweb\webmodule\WEB-INF\web.xml b) applications\maximo\maximouiweb\webmodule\WEB-INF\web.xml c) disbable BIRT report service from maxservice table 2. Axis servlet used by Integration code has to be disabled changes to a) applications\maximo\meaweb\webmodule\WEB-INF\web.xml file Database Scripts: N/A Manual Changes: N/A. --- APAR #: IZ82789 Issues(s): 10-17084 Description: An asset is referenced two time in the assetstatus tabel instead of only once. Database Scripts: N/A Manual Changes: N/A APAR #: IZ87032 Issues(s): 10-19221 Description: In the Inventory application, you cannot change the bin number when you are transfering out a lotted item. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ87523 Issues(s): 10-19483 Description: In the Issues and Transfers application, when you return a rotating item to a storeroom, an unkown error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ86293 Issues(s): 10-18774 Description: In the Purchase Orders application, on the Purchase Order line, the value of the GL Debit Account is cleared when you select the work order before selecting the item for the type Standard Service. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ87335 Issues(s): 10-19424 Description: In the Service Request application, when you enter an asset manually, tab out of the field, then click the Contiue button, a Decommissioned Asset is selected for the Asset field and an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ67630 Issues(s): 10-19597 Description: In the Problems application, after you enter the data in the Problem worklog, all the entries in the log are displayed and not only the ones associated with the problem. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ87096 Issues(s): 10-19248 Description: In the Work Order application, when an invoice has a currency different from the base currrency of the Organization, the View Costs values are displayed in a different currency. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ83241 Issues(s): 10-17375 Description: In the Receipts application, when you are creating a service receipt for multiple partial receipts, without saving each time you add a row, the Line Cost is incorrectly calculated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ88496 Issues(s): 10-19776/IZ88496 dup of 10-16911/IZ81458 Description: In the Item application, you can type in an item number on the Find field and fetch this item even though this item belongs to a site that you do not have access to. Database Scripts: N/A Manual Changes: N/A --- APAR: IZ87029 Issue(s): 10-19214 Description: In the Inventory application, on the 'Where Used' tab, if you add an asset from a site diffent than the site of the current inventory record, this asset disappear after you save the record. Database Scripts: HF7117_16.dbc Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR: IZ86981 Issue(s): 10-19156 Description: In the Purchase Orders application, if you create a PO from a PR that belongs to a different site, the attachments are not coppied. Database Scripts: HF7117_17.dbc Manual Changes: N /A --- APAR: IZ87577 Issue(s): 10-19525 Description: In the People application, if you are changing the availability of the person, and you enter 8:00 on the Start Time and the End Time fileds, the value is automatically calculated to 24 hours and the following error occurs: "BMXAA3113E - The length of the work hours exceeds the range of the times provided." Database Scripts: N / A Manual Changes: N /A --- APAR: IZ81525 Issue(s): 10-16950 Description: In the Receipts application, if you enter two or more service receipts for the same PO line using the Select Ordered Service button and then save the record, the line cost of the service receipt is miscalculated. Database Scripts: N / A Manual Changes: N /A --- APAR: IZ87439 Issue(s): 10-19475 Description: In the Inventory application, on Issue Current Items, if you clear the storeroom and then re-enter the storeroom, the GL ACCOUNT shows inventory accounts instead of invcost accounts. Database Scripts: N / A Manual Changes: N /A --- APAR: IZ87438 Issue(s): 10-19477 Description: In the Inventory application, if you change the condition code, the glcreditacct does not change. Database Scripts: N / A Manual Changes: N /A --- APAR #: IZ85477 Issues(s): 10-18356 Description: In the Invoice application, you cannot modify a record that has the type of SCHED. Database Scripts: N/A Manual Changes: See to the Manual Changes section for this Issue/APAR. --- APAR: IZ87502 Issue(s): 10-19476 Description: In the Work Order application, you cannot duplicate a work order if the work order has inactive supervisor or lead. Database Scripts: N/A Manual Changes: N/A --- APAR: IZ87502 APAR: IZ88169 Issue(s): 10-19666 Description: The Quick Insert portlet for a cloned application cannot be associated with an OOB template. Database Scripts: N/A Manual Changes: N/A --- APAR: IZ68992 Issue(s): 10-10681 Description: In the Report Administration application, the wrong current balance value is displayed in the inventory balance report. Database Scripts: N/A Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR #: IZ77631 Issues(s): 10-15299 Description: In the Domains application, when you have conditions on the WOSTATUS domain that are applicable to different objects, the conditions are not correctly fired. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ88746 Issues(s): 10-19905 Description: In the Invoice application, a invoice line is added to service receipt after the invoice is paid. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89746 Issues(s): 10-20440 Description: The performacne of the calendar date selection is slow. Database Scripts: HF7117_15.dbc Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR #: IZ86259 Issues(s): 10-18736 Description: If a user is using Central time, and the DB and the application server are in EST, the incorrect time zone time stamp is dispalyed on the applications. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89277 Issues(s): 10-20077 Description: In the Job Plans application, if you open a job plan, filter for result on the Material subtab, and then click the Select Value option, the following error occurs: "BMXAA7135E - The Boolean value of JOBMATERIAL.DIRECTREQ cannot be retrieved." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ84676 Issues(s): 10-17954 Description: In the Workflow application, if you send a notification from the WF Reassign window, an excepetion error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ88561 Issues(s): 10-19774 Description: In the Request for Quotation application, if the "Require Approval to Convert PR to PO or Contract" check box is enabled, the records that use a synonym status for approved are not selected when you copy the PR Lines to a RFQ record. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89562 Issues(s): 10-20257 Description: In the Receiving application, when you receive lotted items, the following error occurs: "BMXAA7170E - The remote object of the server cannot be accessed because a network error occurred on the server. null." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ86066 Issues(s): 10-18610 Description: In the Classifications application, if you use a SQL Server, and you try to change the Classification for Items, the following error occurs: "BMXAA4210E - Database error number 8115 has occurred." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ90195 Issues(s): 10-20669 Description: You cannot add Multiple Offerings to Shopping Cart in TSRM 7.2.1. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89565 Issues(s): 10-20258 Description: When you upgrade an environment using SRM 721(MBS 7117) after SRM 720(MBS7115) is already installed, two errors in the integrity checker are caused by the wrong column size. Database Scripts: HF7117_19.dbc Manual Changes: N/A --- APAR #: IZ79462 Issues(s): 10-15979 Description: In the Person application, on the Modify Person Availability window, the rows in the Work Dates table window disappear when you change the value of the Display From field. When the same date is entered a second time, the Work Dates table window refreshes and the correct set of PersonAvail records is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89604 Issues(s): 10-20289 Description: In the Inventory Balance Report, when you perform a query where the statement for the CONDITIONCODE does not deal with NULL values, the inventory balances on the report are incorrect for items that are not condition enabled. Database Scripts: N/A Manual Changes: Reimport INVENTOR/inventory_balance_tbl.rptdesign -------- -------- ============================================================================================== End HF008 (MBS_7117_LAFIX.20101214-1604.psi.zip) ============================================================================================== -------- -------- ============================================================================================== Begin HF009: MBS_7117_LAFIX.20110131-1130.psi.zip ============================================================================================== -------- -------- --- APAR #: IZ80472 Issue(s): 10-16350 dup of 09-22632 Description: If you configure an object in Source and promote this asset to UAT or Production, you must also configure the 'same as objects' values in the Target field during the migration process. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ85374 Issues(s): 10-18315 Description: In the View Work Details tab, the options flag "=Include History Flag?" is not working. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89215 Issues(s): 10-20027 Description: In the Items application, if you look up alternate items and no items are returned, an SQL exception is thrown. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89760 Issues(s): 10-20448 Description: In the Classifications application, when you add a nomeric value in the asset specification, Maximo formats or rounds the value when displaying the screen. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89303 Issues(s): 10-20115 Description: In the Condition Monitoring application, when the most recent measurement is deleted, the AssetMeter or LocationMeter LastReading associated with the MeasurePoint is not updated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ90883 Issues(s): 10-20996 Description: In the Meters application, the asset meter inspector field is not defaulted when you enter a new reading value if the asset meter object does not have an owning object. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ79293 Issue(s): 10-15970 Description: In Rpt: Harrier Engine, when you try to direct print a report, you get a 500 error. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ79812 Issue(s): 10-16040 Description: In the Assignment Manager application, if your locale is not EN_US, the labor grid is not displayed. Database Scripts: N/A Manual Changes: N/A --- APAR: IZ88552 Issue(s): 10-19771 Description: In the Email Listener, you cannot attach .msg files. Database Scripts: N/A Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR: IZ91317 Issue(s): 10-21306/IZ91317 dup of 10-16204 Description: The translations for 7110 , or 7114, and 7117 are different. Therefore, synonymdomain.value and related tables do not match after upgrade. Database Scripts: N/A Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR #: IZ91297 Issue(s): 10-21270 Description: In TAMIT, if you accidentally clear the error xml files from the system, TAMIT does not recover the error files from the JMS error queue. Database Scripts: N/A Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR #: IZ90445 Issue(s): 10-20845 Description: In the Warranty Contracts application, when you create a work orderm from an asset that is under a warranty contract, no waring message is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ91185 Issue(s): 10-21168 Description: Some records in the login tracking table are getting the wrong ATTEMPTRESULT value. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ91286 Issue(s): 10-21251 Description: In the Purchase Requisitions application, you cannot select revision contract on the PO contract look up. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ84817 Issue(s): 10-17988 Description: If your login id and your user id are not the same, the eletronic signature is not recorded in the login tracking table. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89748 Issue(s): 10-20441/IZ89748 dup of 11-10167 Description: When the database is disconnected, MAXIMO is removed from the MAXSESSION table. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89743 Issue(s): 10-20439 Description: When you are creating ad-hoc reports, the QBR functionality does not work for the Failure Codes application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ91467 Issue(s): 10-21412 Description: In the Purchase Orders application, you can select and assing the Terms from an organization to a record that belongs to a different organization. Database Scripts: N/A Manual Changes: N/A --- Issue(s): 10-20605 Description: In the Item Master application, if you work in an environment with multiple organizations, you cannot set a different default vendor for an item in each organization. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89968 Issues(s): 10-20561 Description: In the Work Order application, the tasks and the taskid in the plans tab do not match. Database Scripts: N/A Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR #: IZ75832 Issues(s): 10-14043 Description: POSET and POLINESET are not closed when done, causing an out of memory error to occur. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77555 Issues(s): 10-15248 Description: In the Inventory application, if you change the physical count adjustment screen in the application designer, exceptions are continuosly thrown for consuming all memory. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ90673 Issues(s): 10-20934/IZ90673 is dup of 10-14117 Description: In the Work Order application, when you duplicate a parent work order, and the childer records of this work order have multiple locations, the duplicated children do not maintain the locations. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ90440 Issues(s): 10-20811 Description: In the Locations application, if the primary system chek box is selected, you cannot clear it. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89926 Issues(s): 10-20512 Description: Workflow notifications are being sent even thought the condition was not met. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ84162 Issue(s): 10-17771 Database Scripts: N/A Description: You cannot create an ad hoc report if your user name contains a backslash. Manual Changes: N/A --- APAR #: IZ88171 Issue(s): 10-19679 Description: In the Locations application, when you try to change the status of a location to DECOMMISSIONED, or to a synonym of DECOMMISSIONED, the change does not roll down to child locations and associated assets. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76191 Issue(s): 10-14290 Description: When start a work flow for an object that has attributes that are both null and flagged as REQUIRED in the user interface, the 'Required field is blank' error message message is displayed and hangs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77190 Issue(s): 10-15075 Description: If a work flow process has an interaction before a stop, and this process called a sub-process before, the intereaction does not automatically run to finish. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ86441 Issues(s): 10-18835/IZ86441 is dup of 10-18837 Description: When you enable the validation of contentuid on new records related to the star center, a performance problem occurs. Database Scripts: HF7117_20.dbc Manual Changes: N/A --- APAR #: IZ92796 Issue(s):11-10677 Description: In the Work Order application, the valid crossover fields of children work orders created using PM Route are not getting populated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ92167 Issue(s):11-10373 Description: When you are creating a service request, and you select an asset from the drill down menu for the assetnum field, an asset from a different site is selected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ92795 Issue(s):11-10678 Description: In the Service Request application, on advanced searches, when you select a value form the drill down menu on the Location search field, the value is not returned. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ91289 Issue(s): 10-21249 Description: The Start Center is displayed in English, even though you are logging in with Chinese selected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ92507 Issue(s): 11-10543 Description: In the Reorder application, during the reorder process, a PR is not created for special order items. Database Scripts: N/A Manual Changes: N/A -------- -------- ============================================================================================== End HF009: MBS_7117_LAFIX.20110131-1130.psi.zip ============================================================================================== -------- -------- ============================================================================================== Begin HF010: MBS_7117_LAFIX.20110325-1458.psi.zip ============================================================================================== -------- -------- --- APAR #: IZ90425 Issues(s): 10-20788 Description: In the Routes application, you cannot select a value after filtering for results. Database Scripts: N/A Manual Changes: See the Manual Changes section for this Issue/APAR --- APAR #: IZ86817 Issue(s): 10-19072 Description: In Security Groups, the data restriction is not working for users application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ93863 Issue(s): 11-10914 Description: When you filter a work order in the Work Order History list, a Please Wait dialog is displayed and, a few seconds later, you can see the work order. However, sometimes, on random occasions, this dialog does not close until it times out and you cannot see the work order you filtered. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ86752 Issues(s): 10-19012 Description: In the Purchase Contracts application, you cannot cancel a contract that has no contract lines. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ90453 Issues(s): 10-20848 Description: When you open an application, you can set a time and a date to results. If you download these result sets to Excel, the date and time format changes to the American format even if you specified another language to your Maximo profile. Database Scripts: N/A Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR #: IZ91339 Issues(s): 10-21303 Description: In Issues and Transfers application, the SQL does not return any values in the Default Table Data area because the tositeid is null since the table data is based on zombie. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ95288 Issues(s): 11-11611 Description: In the Inventory application, you cannot make a kit when the matrectansid is a long number. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ91506 Issues(s): 11-10019 Description: In the Work Order application, when you delete one failure code row, all the other failure codes are cleared and you cannot undo this action later. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ94247 Issues(s): 11-10978 Description: If you log in to Maximo using Tivoli09 skin, an error occurs because some files appear to be missing from the Install folder. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ92819 Issues(s): 11-10702/IZ92819 dup of 10-15135/IZ77384 dup of 10-20984 NONE APAR Description: When you try to upgrade to Maximo 7.1.1.8, an error occurs and ConfigDB fails. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ95194 Issues(s): 11-11540/IZ95194 dup of 10-21201 Description: When you use the filter and the query POWAPPR, you cannot filter a PO using a Total Cost value in the Result Set portlet. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ92115 Issues(s): 11-10314/IZ92115 dup of 10-21413 Description: When you specify information in an Inventory, if you highlight a row in the Reorder Details tab, you get a message that informs that the text has been copied into this row, even if you haven't performed any copy action. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89733 Issue(s): 10-20438 Description: You cannot use a comma in the Mail Recipient Name field to separate email addresses. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77539 Issue(s): 10-15216/IZ77539 dup of 11-10563 NONE APAR Issue Description: UpdateDB fails when unexpected changes are made to Text-Searching on tables. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ95374 Issue(s): 11-11671 Description: When you send a note from Workflow, the CommTemplate gets the status assigned to WFInstance. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ82447 Issues(s): 10-16998 Description: In the Work Order application, if you create a safety plan for a location, then create a work order for a location that was not associated to the safety plan, the safety plan is not referenced on the work order. Database Scripts: N/A Manual Changes: N/A --- APAR: IZ88083 Issue(s): 10-19627 Description: If you add a classification to the Classification Catalog, the performance of all applications slows down. Database Scripts: HF7117_21.dbc Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR #: IZ92240 Issues(s): 11-10423 Description: When you bring up specifications for every applications that use classifications, unnecessary queries are shown on the class structure table. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ92736 Issues(s): 11-10634 Description: In many applications, users with read-only access are allowed to make and save changes to long descriptions. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ95405 Issues(s): 11-11701 Description: If you add a Malay locale to the system, you and the other users assigned to this locaçe cannot log in unless you restart the MXServer. Database Scripts: N/A Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR #: IZ92909 Issues(s): 11-10715 Description: In the Receipts application, the receipt loadcost and the return loadcost are not calculated properly after you repeat cycles of receiving and returning rotating items. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ93606 Issues(s): 11-10857 Description: Bulletin Board messages are not shown in all the sites they are supposed to appear. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ94817 Issues(s): 11-11343/IZ94817 dup of 11-10342 NONE APAR Issue Description: In the Domains application, if you add more than one synonym at a time, an error occurs and the following message in shown: "BMXAA6309E - Same synonym value WPLAN cannot be assigned to two different internal values within the same domain WOSTATUS." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ91764 Issues(s): 11-10157 Description: When you make a change to Start Center templates or portlet, it does not take effect until you sign out and then sign back into Maximo. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ94276 Issues(s): 11-11028/IZ94276 dup of 10-18023 NONE APAR Issue Description: In the Request for Quotation application, when a Purchase Order is created from an RFQ, the RFQ Line Number is not visible on the PO Lines tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ95049 Issues(s): 11-11402 Description: In the Locations application, when you duplicate a location, the Status History Date gets updated with the original location status date. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ95605 Issues(s): 11-11806 Description: In the Assets application, when you create a service request from an asset for which the priority is 5, the following error message is displayed: "BMXAA4190E - Reported Priority 5 is not in the value list.". Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ92497 Issues(s): 11-10540 Description: In the Invoice Application, when you create an Invoice and do not specify any information to the Change To section, the Status box appears as read-only. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ95072 Issues(s): 11-11424 Description: In the Work Order application, when you add a new labor to the Labor tab, the end date field gets populated automatically and, if you clear this field, an unknown error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ92496 Issues(s): 11-10542 Description: In the Security Groups, when you choose the Authorize Group Reassignment option, data restrictions restrict the lookup for users, but they do not restrict the list displayed by the button. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ88735 Issues(s): 10-19904 Description: In the Assets application, the drilldown values are not displayed in complete ascending order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ95344 Issues(s): 11-11658 Description: In the Invoice application, if you do not specify values for quantity and unitcost in a Purchase Order added to an Invoice, an error occurs in the values specified for service and invoice tolerance. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89337 Issues(s): 10-20167 Description: In the Work Order application, two different users can access the same work order record and modify the same task. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ84689 Issues(s): 10-17953 Description: In the Invoice application, if you process an invoice into Maximo using MEA (MIF), and an item is conditional enabled, an error occurs and the invoice is not processed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ95306 Issues(s): 11-11620 Description: When you download an xls file that contains a work order, the label value returned is the work order`s default label value even if you have already specified and saved a new value to replace the default. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ96319 Issues(s): 11-12177 Description: In the Purchase Contracts application, if you specify a Line Cost or an Unit Cost of 0.31679, for example, the decimal portion is rounded to 0.32. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ96586 Issues(s): 11-12365 Description: In the Labor Rate Contracts application, when you select the look up filter on the Craft attribute, it does not return any value. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ96112 Issues(s): 11-12116 Description: In the Service Requests application, you cannot order the classification in the Classify dialog. Database Scripts: N/A Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR #: IZ96606 Issues(s): 11-12363 Description: When you try to create a work order with Job Plans associated to different classifications that contain common attributes, an error occurs and you cannot save the work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ95730 Issues(s): 11-11890 Description: In the Desktop Requisitions, if you use the delete key to remove the vendor and tab out, an unknown error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ96896 Issues(s): 11-12480 Description: In the Request for Quotation application, when you specify a value for the RFQ.PRIORITY in the database configuration, this value is replaced by 0. Database Scripts: HF7117_23.dbc Manual Changes: N/A --- APAR #: IZ96922 Issue(s): 11-12490/IZ96922 dup of 10-19621/IZ87944 dup of 10-16478/IZ80808 Description: In the Assets application, if you try to change an asset status from Not Ready to Operating, an error occurs and the following message is shown: "BMXAA0032E- Cannot change the status to the same status". Database Scripts: N/A Manual Changes: N/A -------- -------- =========================================================================================== End HF010 (MBS_7117_LAFIX.20110325-1458.psi.zip) =========================================================================================== -------- -------- ============================================================================================== Begin HF011 (MBS_7117_LAFIX.20110426-0919.psi.zip) ============================================================================================== -------- -------- --- APAR #: IZ86727 Issue(s): 10-19009 Description: If the URL attachemnt names have more than 40 characters and you display them in a List View, the names wrap and are no longer hyperlinks. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ95125 , IZ87140 Issues(s): 11-11471/IZ95125, 10-19294/IZ87140 dup of 10-14615 Description: In the Work Order application, if you have the same work order number in different sites and you add these work orders to the Work Log tab, Maximo associates the work log for both work orders. Database Scripts: HF7117_24.dbc Manual Changes: N/A --- APAR #: IZ93313 Issues(s): 11-10821 Description: If you use LDAP and apply a hotfix for Maximo, the Run Reports action does not return reports anymore. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ97822 Issue(s): 11-12986 Description: When you download records from the List Tab results, you cannot open the file in Excel. Database Scripts: N/A Manual Changes: N/A ------ APAR #: IZ95190 Issues(s): 11-11539 Description: You can use find function in a PO to select another approved PO and change it to cancelled. However, the PR associated to the filtered PO is also cancelled and does not go back to approved. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ93263 Issues(s): 11-10772 Description: When you delete a report from the Report Administration, an unknown error occurs and the record is not removed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ96117 Issues(s): 11-12118 Description: When you access a table window for the first time, the default values do not get populated automatically. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89731 Issues(s): 10-20395 Description: In all table windows that have a 'Download' link, the date data is exported in String format. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ83032 Issues(s): 10-17222 Description: On List tabs, when you use the download button, the empty dates are filled with the word 'null'. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ94652 Issues(s): 11-11220 Description: When you migrate MEA Interface using the migration manager, an error occurs and the configuration records cannot be exported. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ96064 Issues(s): 11-12076 Description: In the Message Reprocessing application, when you use the pencil icon in the list view the message appears to be blank when you have many invoices. Database Scripts: N/A Manual Changes: N/A -------- -------- ============================================================================================== End End HF011 (MBS_7117_LAFIX.20110426-0919.psi.zip) ============================================================================================== -------- -------- ============================================================================================== End HF012 (MBS_7117_LAFIX.20110623-1121.psi.zip) 8/25/2011 @ 2:26pm ============================================================================================== -------- -------- --- APAR #: IZ97351 Issues(s): 11-12842 Description: When you build and deploy Maximo EAR and enable security, the Start Center stops loading images. After you apply a workaround, the Start Center becomes normal. However, after that, many applications stop loading images and, if you right click any icon and open properties, you see that there is a slash missing in the URL path. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ94717 Issues(s): 11-11219 Description: In the Issues and Transfers application, when an item is related to a work order but they are not in the same location, you cannot filter DYSPLAYWONUM in the Select Reserved Items dialog. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ30206 Issues(s): 08-20458 Description: The browser printing function cannot print full pages when an application has multiple pages. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ95710 Issues(s): 11-11894 Description: When you create an incident and send a message with attachments for the affected person, an error occurs and the attachments are not displayed correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ98617 Issues(s): 11-13251 Description: When you set English as the base language for Maximo database and Korean as the second language and you specify a description for a Condition Expression in Korean, an error occurs and new buttons are disabled for all records. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ96920 Issues(s): 11-12481 Description: In the Purchase Requisitions application, you can specify a Location and a Storeroom for a PR in the default table data. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ96856 Issues(s): 11-12447 Description: In the Service Requests application, you can create a service request and route this request to a work flow with an active node that is linked to this application and to the CreateWO action. However, when you do this, work orders are not created. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ97885 Issue(s): 11-13078 Description: When you specify conditions in the condition expression manager, they do not work for static texts. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99029 Issues(s): 11-13385 Description: When you receive a note in the E-Mail Listener, an error occurs if the person who sent the e-mail has a space or a comma in their e-mail address. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99372 Issue(s): 11-13480 Description: In the Reorder application, after you perform an upgrade, an error occurs if you reorder the inventory. Database Scripts: N/A Manual Changes: N/A --- APAR: IZ91177 Issue(s): 10-21152 Description: In Person Group, after you install HF021 for 7.1.1.6, the object restriction does not work. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ94093 Issue(s): 11-10966 Description: In the Application Designer, when you close a view from an application screen, the application prompts you a message to save your changes even if no changes were made. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99189 Issue(s): 11-13434 Description: In the Purchase Requisitions application, when add a Vendor to a PR and enter a storeroom, the GL Control Account does not get populated when you add a new row to create a PRLINE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ97255 Issue(s): 11-12731 Description: Security data restrictions are not qualified with table names when added to the report where clause. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89696 Issue(s): 10-20360 Description: In the Issues and Transfers application, the integration point for invoice balances and inventory messages is not being triggered. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00097 Issue(s): 11-13728 Description: In the Software Contracts application, a dabase error occurs when you try to add an article to the Contract Line Items tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99897 Issue(s): 11-13677 Description: In the Domains Application, if you specify a organization and a site to a crossover domain and save it, the next time you open this record, you notice that the Destination and Source fields are null. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00083 Issue(s): 11-13732 Description: In the Receipts application, when the PO unit cost is not the same as the standard cost, you cannot return received items. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99718 Issue(s): 11-13622 Description: If you click the Forgot your Password link when you try to log on, you are required to specify a valid primary e-mail address, but you are not required to answer the password hint question. Therefore, if you leave the password hint field blank and click Submit after specifying your e-mail address, the following message is displayed: 'BMXAA5820I - Your password has been reset. Please check your e-mail for your new password.' Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00368 Issue(s): 11-13808 Description: In the Work Order application, when you replace a Safety Plan by another one, only the hazards that are not common for both of them are copied with the new Safety Plan. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ68523 Issues(s): 10-10547 Description: In Rpt: Harrier Engine, running maintenance cost rollup does not set the ROLLUP FLAG = 1 when finished. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ94310 Issues(s): 11-11039 Description: If you add a duplicated Migration Group after making some changes to this group in the Migration Manager and create a Package, the navigation bar disappears. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ90072 Issues(s): 10-20606 Description: The application server is crashing because of a thread deadlock. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ90139 Issue(s): 10-20639 Description: The Asset Details report does not return any data. Database Scripts: N/A Manual Changes: Reimport ASSET/asset_detail.rptdesign --- APAR #: IV00276 Issue(s): 11-13774 Description: If you create a simple condition, the :&OWNER& expression works fine. However, in complex conditions, an error occurs with this expression. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ98707 Issue(s): 11-13295 Description: In the Labor Reporting application, if you enter a start time and a finish time, and the minutes unit of the total duration does not finish in 0 or 5, an error occurs and the following message is shown: "BMXAA2568E - Hours exceeds duration between start and finish times." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ98618 Issue(s): 11-13252 Description: In the Escalation Manager, when you activate an escalation with work orders and the escalation process fails, the settings you specified are not applied and multiple e-mail notifications are sent. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ97581 Issue(s): 11-12872 Description: If you link to the Inventory application through a Go To link added on the Item field in the Item Master application, the filter used is only by Site instead of being by Site, Status and Is Archived. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ92708 Issue(s): 11-10625 Description: In the Receipts application, when you receive items with USD as the Base Currency 2 and the Distributed Cost enabled to the value specified in a PO Line, the values are not calculated correctly and, among other errors, they are saved in the Base Currency 2 instead of the Base Currency 1. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ80889 Issues(s): 10-16483 Description: In the Material Requisitions application, when the costs of a record POLINES are distributed to the same GL Debit account with different percentages, the POCOST of all lines are distributed using the same percentage. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ76348 Issues(s): 10-14456 Description: When you create a PR, distribute the cost between different GL Accounts, approve the PR and create a PO record from this PR, the following message is displayed when you try to approve the PO: "Could not change PO status to APPR - The Debit or Credit General Ledger account is not specified." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ95724 Issues(s): 11-11885 Description: In the Preventive Maintenance application, if you move a rotating asset with a continuous meter and a PM to another location, the parameters set to the PM are not copied correctly into the new location. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00413 Issues(s): 11-13824 Description: In the Receipts application, if you add a PO Line to the Receipts tab and specify a new percentage to it, the PO Line cost is not calculated correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ96331 Issue(s): 11-12175 Description: In the Assets application, when you type in a value on the long description field and press enter, type in a value again and press enter, and then pree the tab key, the carriage returns is cleared and your previous 2 lines are now one line. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ97434 Issue(s): 11-12835/IZ97434 dup of 10-20848 Description: The date and time for the field whose data type is "DATETIME" are shown as text instead of date. Database Scripts: Manual Changes: N/A --- APAR #: IV00453 Issue(s): 11-13877 Description: In the Desktop Requisitons application, the unit cost of the PR line is rounded if the Material Requisiton line has 4 decimals. Database Scripts: Manual Changes: N/A --- APAR #: IV01394 Issues(s): 11-14180 Description: In the Receipts application, if you are receiving multiple material recortds, and you save once, the current balance and the total balance are incorrectly calculated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99196 Issues(s): 11-13435 Description: In the Classification application, if you clear the numeric value for the attribute field in the Specifications tab, the value is not deleted from the description. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99744 Issues(s): 11-13621 Description: If you set the CI Classification field as required in the Application Designer, Maximo does not validate the field and you are able to save a record without specifying a value for the field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ96682 Issues(s): 11-12400 Description: In the Workflow General, when you start a process, the message "BMXAA4411E-Process xx started" appears and remains on the screen for many seconds. When it disappears, it causes a resizing in the screen layout. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00452 Issues(s): 11-13878 Description: In the Work Order application, if two work orders from different sites have the same work order number, the communication logs are incorrectly associated. Database Scripts: HF7117_26.dbc Manual Changes: N/A --- APAR #: IZ99022 Issues(s): 11-13387 Description: If you download the list table, the date field is displayed incorrectly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01313 Issues(s): 11-14138 Description: If you have a security restriction for an object and you type a partial user name into the AFFECTEDPERSONID or the REPORTEDBYID fields to search for a PersonID, the query created duplicates the security restriction and causes a performance issue. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01165 Issues(s): 11-14119 Description: In MEA Integration Framework, if you send a Web Service transaction with a MAXAUTH HTTP Header, the MASXXESIONS are not cleared. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99574 Issue(s): 11-13557 Description: Material reservation does not work on Activity tickets if the work order is approved using workflow actions with communication templates associated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99301 Issue(s): 11-13451 Description: In the Work Order application, on the Actuals Labor sub tab, if you clear the Start Date field, select a value that has a contract attached for the Craft or the Labor fields, an unkonw error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01687 Issue(s): 11-14315/IV01687 dup of 10-10149 Description: In Migration Manager, when you are deploying a security package that has a new security group and start center template, and unkown error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01076 Issue(s): 11-14084 Description: In Upgrade Utility, the COMMITMENTTYPE Synonym domain has Default checked for all 'OTHER' internal values. Database Scripts: HF7117_27.dbc Manual Changes: Run the database script HF7117_27 --- APAR #: IV01602 Issue(s): 11-14253 Description: In Rpt: Harrier Engine, the excluded list of attributes for the default Report Object Structure is applied to all object structures used in the application. Database Scripts: HF7117_28.dbc Manual Changes: N/A --- APAR #: IV01552 Issue(s): 11-14234 Description: In the Items application, you cannot use the Add Items to Storeroom window to add items to a courier location. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01599 Issue(s): 11-14254 Description: In the Inventory application, if you return inventory items, specify a value for the Physical Count field, and then reconcile the balance, the balance is incorrectly calculated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01790 Issue(s): 11-14363 Description: If you work on a enviroment with the langague set to CZECHn, the BMXAA4129E error message might occur durin the authorization process of some Configuration Items. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00361 Issue(s): 11-13809 Description: In the Assets and Work Orde application, when you delete a downtime record using the Manage Downtime History window, the total tims of the asset is not updated to reflect the change in downtime history. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01216 Issue(s): 11-14129 Description: In the Assets application, when you delete an asset that has a meter of type GAUGE and the GAUGE meter has readings in the MEASUREMENTS table, the followig error message is displayed: "BMXAA4200E - Record has been updated by another user. Refetch and try again." Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01129 Issue(s): 11-14091 Description: In Locations application, when you try to change the status of a Location to DECOMMISSIONED, the following error is displayed: "BMXAA3629E - Cannot delete work asset, it is linked to other business objects." Database Scripts: N/A Manual Changes: N/A -------- -------- ============================================================================================== End HF012 (MBS_7117_LAFIX.20110623-1121.psi.zip) 8/25/2011 @ 2:26pm ============================================================================================== -------- -------- ============================================================================================== Begin HF013 (MBS_7117_LAFIX.20110810-0947.psi.zip) ============================================================================================== -------- -------- --- APAR #: IZ90544 Issues(s): 10-20884 Description: In Rpt: Harrier Reports, the cost by system report does not always sum the costs correctly. Database Scripts: N/A Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR #: IV01595 Issue(s): 11-14258 Description: In the Assets application, on the List tab, when you move more than one asset to a different site and location using the 'Move/Modify' dialog, and one of the assets selected is already in the destination site and location, the following error occurs: "BMXAA4200E - Record has been updated by another user. Refetch and try again." Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ93242 Issues(s): 11-10764 Description: In the Assets application, when you specify a location to swap a rotating asset and they contain the same item number, the following error message appears: 'Location is currently occupied by asset.'. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01874 Issue(s): 11-14376 Description: In the Purchase Requisition application, when you create a record with tax, the sum of the LOADEDCOST for each distribution is not equal to the Total Cost on the PR. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01883 Issue(s): 11-14375 Description: In the Classifications application, if you have large top level (4000) classifications, the lookup takes long and generates a large number of sql statements which might be redundant. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00806 Issue(s): 11-14016 Description: When you open a website link, a javascript error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01986 Issue(s): 11-14406 Description: In Desktop Requisitions, if you remove a materail line, add a new material line and approve the record, the PR for the line that was removed is not deleted. Database Scripts: N/A Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR #: IV02210 Issue(s): 11-14481 Description: If you try to "Set Graph Options" on a Start Center Result Set portlet, and then immediately sort the list or go to a different page in the list, the Result Set disappears. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01208 Issue(s): 11-14134 Description: In Desktop Requisitions, when you add a dock link, MR lines disappear. Database Scripts: N/A Manual Changes: N/A --- APAR #: Issue(s): 11-14572 Description: Mbo.undelete() fails to undelete related Long Descriptions. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV02296 Issue(s): 11-14525 Description: In the ITAM Reconciliation, if a link rule uses more than one classstructureid value for an assetspec, the reconciliation task does not make any matches. Database Scripts: N/A Manual Changes: N/A --- APAR #: Issue(s): 10-19005 Description: (performance) Need to replace subselect of synonymdomain by a keyword in sqlformat. Database Scripts: HF7117_29.dbc Manual Changes: N/A --- APAR #: IZ86725 Issues(s): 10-19011 Description: In the MEA Integration Framework, if you try to import an xml file using an External Schema Process, an error occurs and the file is not imported. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ98728 Issues(s): 11-13298 Description: In Application Designer, you cannot add a section to a table. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV02747 Issues(s): 11-14660 Description: In the Invoice application, the limts are not calculated accordign to the exchange rates. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 10-19102 Description: [UPG] Error displayed on BEA Console logs in the Crew Types (T&D) application: java.lang.ArrayIndexOutOfBoundsException: -1 Database Scripts: N/A Manual Changes: N/A --- APAR #: IV02850 Issues(s): 11-14695 Description: When CI is linked to Assets CI, the service and sevice group are unavailable. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Issues(s): 11-14569 Description: Integrity Checker repairs failed when repopulating MaxSysKeys Database Scripts: N/A Manual Changes: N/A --- APAR #: IV02778 Issues(s): 11-14668 Description: In the Assets application, when you try to change the asset status from OPERATING to NOT READY after reporting downtime for a date/time in the future, a System Message dialog displas the incomplete message "asset#statusdate". Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99743 Issues(s): 11-13620 Description: In the ITAM Software License, if you try to create a new License for a PO, an error occurs and the message "BMXAA4176E - Attribute TOTALCOST does not exist." is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV02646 Issues(s): 11-14616 Description: In the Bulletin Board, when you try to perform a "Delete the expired bulletin messages", only the status records are deleted. Database Scripts: N/A Manual Changes: See the Manual Changes section for this Issue/APAR. --- APAR #: IV00314 Issues(s): 11-13784 Description: When assignments are deleted, associated work order long descriptions are also deleted. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV03414 Issues(s): 11-14912 Description: In the Issues and Transfers application, if you open a work order that has different status internal values for different sites, an error occurs and an error message informs that the status is not the one correspondent to the site. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV03099 Issues(s): 11-14773 Description: In the Work Order application, if you add an item to a WAPPR work order and leave the task field null, when you approve the work order, the Task ID is populated with a random value. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ86683 Issues(s): 10-18964 Description: If your user name contains a single quotation mark, or an apostrophe, an error occurs when you try to login. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV02630 Issue(s): 11-14614 Description: When duplicating a configuration item that is linked to an asset, the asset number is copied to the new configuration item. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00696 Issues(s): 11-13953 Description: In the Rpt: AD Hoc Reports, if you save a QBR report in a multilanguage environment, the request pages for all other reports may appear in an incorrect language. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00395 Issues(s): 11-13817 Description: In the Work Order application, if you try to add a task with no task ID to a work order and change the work order status to INPRG, an error occurs and the message "BMXAA4195E - the required field Task blank." is displayed. However, if you change the work order status to APPR, no error occurs and the status is changed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ87459 Issues(s): 10-19472 Description: You cannot view the document that is attached to an inbound communication. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ93223 Issues(s): 11-10763 Description: In the Rpt: Harrier Reports, if you specify 1/1/10 and 12/31/10 as the report parameters for schedStartDate and schedEndDate, the getEndDayTimestampFunction does not generate the correct value. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV02715 Issues(s): 11-14661 Description: Description: In the Commodity Code, when you try to create a data restriction for Self-Service users of the Create SR application on the Commodities, an error occurs and the restrictions do not work. Database Scripts: N/A Manual Changes: N/A --- -------- -------- ============================================================================================== End HF013 (MBS_7117_LAFIX.20110810-0947.psi.zip) ============================================================================================== -------- -------- ============================================================================================== Begin HF014 (zzz.psi.zip) ============================================================================================== -------- -------- --- APAR: IZ90716 Issue(s): 10-20951/IZ90716 dup of 11-11817/IZ95630 Reworked in HF012, HF013 Description: If you are in a Japanese environment and you use IE6 instead of IE8, an error occurs when you try to upload the migration package through the Migration Manager application and the following message is shown: "The Page Cannot Be Displayed". Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99159 Issue(s): 11-13412/IZ99159 dup of 10-19145 Description: In the Incidents application, you can save a Ticket even if the actual start date is later than the finish date. Database Scripts: HF7117_25.dbc Manual Changes: Please see Manual Changes section. --- APAR #: IV02400 Issues(s): 11-14592 Description: COMBOBOX DOESN'T FUNCTION WITHIN A TABLE COLUMN. VALUE SELECTED DOESN'T APPEAR Database Scripts: N/A Manual Changes: N/A --- APAR #: IV05799 Issues(s): 11-15397 Description: In Assets or Locations application if the user deletes and then undeletes a meter record having one reading or measurement and then clicks 'Save', the reading or measurement is deleted. This should not happen because the meter was ultimately not deleted. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV05130 Issues(s): 11-15324 Description: CALENDAR LOOKUP DOESN'T RESOLVE 24 HOUR TIME INPUT TO 12 HOUR INPUT Database Scripts: N/A Manual Changes: N/A --- APAR #: IV05190 Issues(s): 11-15335 Description: In Job Plans application, the Meter lookup in the Job Plan Tasks table window shows the same meter multiple times if the meter is used on more than one measure point. Database Scripts: N/A Manual Changes: Refer to Manual Changes section. --- APAR #: IV06232 Issues(s): 11-15435 Description: BMXAA0024E - ADD IS NOT ALLOWED ON CHARTOFACCOUNTS WHEN IN A CLONED CHART OF ACCOUNTS APP. Database Scripts: N/A Manual Changes: Refer to Manual Changes section. --- APAR #: IV05833 Issues(s): 11-15410 / 11-14230 Description: ASSIGNMENT MGR. - TASKS IN WRONG EXECUTION ORDER Database Scripts: N/A Manual Changes: N/A --- APAR #: IV06300 Issues(s): 11-15453 Description: CUSTOMER STATES THAT THE NEXT ASSIGNMENT DUE IS NOT CONVERTING TO THE USER TIME ZONE Database Scripts: N/A Manual Changes: N/A --- APAR #: IV06373 Issue(s): 11-15467 Description: IN MULTILANGUAGE ENVIRONMENTS, PARAMETER LABELS ARE OCCASIONALLY IN THE WRONG LANGUAGE Database Scripts: N/A Manual Changes: You must Generate Request Pages for all reports in all languages for the change to take effect. In a clustered environment, you must also restart all nodes before the corrected label values are available on each node. This is a one-time process. --- APAR: IZ89902 Issue(s): 10-20500 Description: The application server causes the CPU to work at full capacity because of an infinite loop in the Assets application when the appLink goes from the Item field to the Item application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV03889 Issue(s): 11-15111 Description: MATUSETRANS.SITEID POPULATED WITH INCORRECT SITE - RESULT OF RECEIVING FOR DIRECT ISSUE ITEMS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV06823 Issue(s): 11-15646 Description: STOPPING QUERY RESULTS IN ERROR BMXAA4214E-AN UNKNOWN ERROR HAS OCCURRED Database Scripts: N/A Manual Changes: N/A --- APAR #: IV07111 Issue(s): 11-15708 Description: MISSING ATTRIBUTE STORLOC Database Scripts: N/A Manual Changes: N/A --- APAR #: IV07355 Issue(s): 11-15833 Description: DOWNLOAD HYPERLINK - TABLE DOWNLOAD NOT INCLUDING SPECIFIC RECORDS WHEN DOWNLOAD FAILS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV07235 Issue(s): 11-15744 Description: When changing the status of a location and rolling the status down to child locations and assets in the locations, assets are removed from routes even if the new status is something other than DECOMMISSIONED. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV06919 Issues(s): 11-15655 Description: POTENTIAL ISSUE WITH WORK ORDER DETAIL REPORT (WOPRINT.RPTDESIGN) DUE TO BUG IN SQL STATEMENT Database Scripts: N/A Manual Changes: Reimport WOTRACK/woprint.rptdesign --- APAR #: IV04711 Issues(s): 11-15305 Description: BMXAA0876E - CANNOT DELETE THIS RECORD. Database Scripts: N/A Manual Changes: Reimport WOTRACK/woprint.rptdesign --- APAR #: IV07481 Issues(s): 11-15852 Description: NOT ABLE TO FILTER IN VIEW REQUISITIONS APPLICATION Database Scripts: N/A Manual Changes: Please refer to Manual Changes section. --- APAR #: IV07614 Issues(s): 11-15901 Description: Object FAILURECODE is read-only - WHEN ENTERING SAME FAILURE CODE FOR DIFFERENT ORGANIZATIONS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00402 Issue(s): 11-13837 Description: In the Receipts application, when saving a receipt the following error occurs: "BMXAA1925E - Cannot return more than what has been received”. Database Scripts: N/A Manual Changes: N/A --- APAR: IZ87787 Issue(s): 10-19598 Description: In the Report Administration application, some specific type of pdf files attached to Maximo are printed in portrait instead of landscape. Database Scripts: N/A Manual Changes: N/A --- APAR: IV02226 Issue(s): 11-14480 Description: CANNOT DISTRIBUTE COSTS UNTIL RECORD IS SAVED. Database Scripts: N/A Manual Changes: N/A --- APAR: IZ95286 Issue(s): 11-11612 Description: INCIDENT SECURITY RESTRICTIONS AFFECTING SEARCH SOLUTION FUNCTIONALITY Database Scripts: N/A Manual Changes: N/A --- APAR #: IV03311 Issue(s): 11-14854 Description: WORKLOG.DESCRIPTION_LONGDESCRIPTION FIELD FORMAT IS DISPLAYED MIS-SHAPEN Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ90716 Issue(s): 10-20951 Description: GOT UNEXPECTED ERROR WHEN TRYING TO UPLOAD PACKAGE WITHOUT SPECIFING FILE Database Scripts: N/A Manual Changes: N/A --- APAR #: IV07993 Issue(s):11-16098 Description: WORKORDER STATUS THAT EXISTS WITHIN MULTIPLE SITES ON DIFFERENT INTERNAL VALUES CAUSES ISSUES IN RECEIVING SERVICE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00075 Issue(s):11-13727 Description: THE NESTEDJOBPLANS MAXVAR FUNCTIONALITY IS NOT GENERATING WORK ORDERS FOR NESTED JOBPLANS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ97889 Issues(s): 11-13002 Description: NEGATIVE VALUES SHOWING #VALUE WHEN OPENING EXCEL 2007 FROM LABOR REPORTING Database Scripts: N/A Manual Changes: Add the following new property to webclient.properties #Used to download duration type as text in Excel webclient.downloaddurationastext=true Note: By default, the value is set to false. --- APAR #: IV06192 Issue(s):11-15415/10-16331 Description: BMXAA0024E - THE ADD ACTION IS NOT ALLOWED ON A L_SIGOPTION OBJECT. WHEN A SECONDARY LANG USER TRIED TO ACTIVATE WF PROCESS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV07849 Issue(s):11-15988 Description: DUPLICATE TAG OUT AND SAFETY PLAN IN TWO SITES CAUSES ERROR Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01528 Issue(s): 11-14236 Description:While trying to approve the Invoice, system presents the errors: BMXAA2013E - Could not change invoice XXXX status to APPR. BMXAA1981E - The sum of all invoice quantities for invoice XXXX for line 1 of purchase order YYYY exceeds the quantity that has been received. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV08045 Issue(s): 11-16143 Description:BMXAA4210E - DATABASE ERROR NUMBER 1795 HAS OCCURRED - WHEN SETTING PASSWORD OVERRIDE IN GROUP WITH 1000+ USERS Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ87781 Issue(s): 10-19596 Description: Server is returning 404 for browser request to load required_label.gif, login_bkg_top.gif, and maximo.css. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ75366 Issue(s): 10-13645 Description: USER FROM AN ORGANIZATION CAN NOT LOG INCIDENT FOR USER IN A DIFFERENT ORGANIZATION. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV03316 Issue(s): 11-14872 Description: CANNOT EDIT FAILURE CODES IN EDIT HISTORY MODE IN WORK ORDER TRACKING APPLICATION. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV06612 Issue(s): 11-15527 Description: ONCE A TABLE GOT LOCKED AND THE SESSION TIMEOUT IS MET THEN THE SERVER GET HANG Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00747 Issue(s): 11-13980 / 11-12511 Description: WHILE STARTING JVM IS ADMIN MODE BULLETINBOARD THROWS AN EXCEPTION WHILE TRYING TO CACHE THE VALID MESSAGES Database Scripts: N/A Manual Changes: N/A --- APAR #: IV03891 Issue(s): 11-15113 Description: SETTING WEBCLIENT.STOPBACK=TRUE DISABLES MAXIMO NAVIGATION FUNCTIONALITY Database Scripts: N/A Manual Changes: To display a warning pop-up when clicking the back button, set webclient.exitwarn=true in webclient.properties. --- APAR #: IV03347 Issue(s): 11-14886 Description: POPUP - THIS PAGE CONTAINS BOTH SECURE AND NONSECURE ITEMS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00636 Issue(s): 11-13904 Description: SELF SERVICE SEARCH SOLUTION SHOWS ALL SOLUTIONS IF RESET BUTTON IS CLICKED Database Scripts: N/A Manual Changes: N/A --- APAR #: IV07355 Issue(s): 11-15833 Description: DOWNLOAD HYPERLINK - TABLE DOWNLOAD NOT INCLUDING SPECIFIC RECORDS WHEN DOWNLOAD FAILS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV07975 Issue(s): 11-16060 Description: KEYBOARD SHORTCUTS FOR MAXIMO APPLICATION DO NOT WORK FOR GERMAN Database Scripts: N/A Manual Changes: N/A --- APAR #: IV07956 Issue(s): 11-16119 Description: GENERICDIRECTORYSYNCHRONIZER LOOPING MECHANISM OVERRIDE ISSUE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV08391 Issue(s): 11-16329 Description: DATA INCONSISTENCY WHEN RECEIVING MORE THAN 500 ROTATING ITEMS IN MAXIMO. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV09470 Issue(s): 11-16730 Description: When an asset associated to multiple PMs is moved to a different site, all PMs created in the new site are copies of the first PM from the set of associated PMs. This only applies to PMs created from master PMs because these are the only PMs that are moved with an asset on a cross-site move. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV08149 Issue(s): 11-16232 Description: RUNNING UPDATEDB, EXTRACTSCTEMPLATELABELS SCRIPT WILL FAIL WITH A NULL INSERT ERROR. 7.1.1.X. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV09543 Issue(s): Description: TRYING TO COMPARE 1 CI DOES NOT WORK. Data Set comparison filter doesn't work properly for class structure IDs with letters. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV09520 Issue(s): Description: Delete a computer on computer application causing all recon link records deleted. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ87230 Issues(s): 10-19343 Description: In the Purchase Requisitions application, if you set the Create Approved PO from Contract on PR Approval option to true, and you try to create PR records on Contract Items, the PO description does not get populated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV09485 Issue(s): 11-16752 Description: DIVIDE BY ZERO ERROR IN INVENTORY AND INVOICE AREAS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV06508 Issues(s): 11-15487 Description: In the Issues and Transfers application, when you add lines of different types to the Materials tab in the Work Order tracking application, the curbal adjustment can be incorrect. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ90477 Issues(s): 10-20847 Description: BMXAA0259E - THE E-MAIL CANNOT BE SENT NULL Database Scripts: N/A Manual Changes: N/A --- APAR #: IV09875 Issue(s): 11-16854 Description: Within the Change Management application, the Change status button for the overall ticket is not separated from the change status for associated tasks. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV10162 Issues(s): 11-16940 Description: RECONCILE BALANCES DECREASES CURRENT BALANCE FOR ITEM IN OTHER SITE WITH SAME NAME AND BIN NUMBER. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99341 Issue(s): 11-13462 Description: In the Assets application, when you apply the method that gets the current parent asset, the database connection remains open for a long time and memory or performance errors can occur. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV10030 Issue(s): 11-16883 Description: WODETAIL REPORT TRUNCATES CENTS ON TOTAL COST Database Scripts: N/A Manual Changes: Re-import WOTRACK/woprint.rptdesign --- APAR #: IV09879 Issue(s): 11-16855 Description: BLANK WHITE SPACE ON BOTTOM HALF OF LOGIN SCREEN Database Scripts: N/A Manual Changes: N/A --- APAR #: IV02393 Issue(s): 11-14583 Description: In the Classifications application, if you create a specification and then modify the Mandatory flag for ITEM and ASSET, the flag does not propagate to the children nor to the assets classified under the children. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV07847 Issues(s): 11-15986 Description: Upgrade corrupts closing dates of financial periods. Database Scripts: UpgradeCOA.db2 UpgradeCOA.ora UpgradeCOA.sqs Manual Changes: N/A --- APAR #: IV09365 Issues(s): 11-16702 Description: MOVE/SWAP ASSETS DIALOG BEHAVIOR DISCREPENCY IN WOTRACK AND ASSET APPS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ42472 Issues(s): 09-10452 Description: WODETAIL REPORT FAILS WITH MAX OPEN CURSON EXCEEDED AFTER HAVING MAX=900 Database Scripts: N/A Manual Changes: Re-import WOTRACK/woprint.rptdesign --- APAR #: IV10790 Issues(s): 11-17146 Description: TABLE DATA (IE. ASSET NUMBERS) ARE BEING TREATED AS PHONE NUMBERS ON IOS DEVICES Database Scripts: N/A Manual Changes: N/A --- APAR #: IV10789 Issues(s): 11-17147 Description: DIALOGS POP-UPS ARE NOT ANCHORED IN APP ON IOS DEVICES Database Scripts: N/A Manual Changes: N/A --- APAR #: IV07281 Issues(s): 11-15777 Description: "INVALID BINDING" IS DISPLAYED WHEN CREATING A NEW APPLICATION USING COMMODITIES TABLE AS "MAIN OBJECT". Database Scripts: N/A Manual Changes: N/A --- APAR #: IV10834 Issues(s): 11-17175 Description: In the PM application when work order generation is executed via the 'Generate Work Orders' action and the 'Run Work Order Generation in the Background?' option is used (that is, the process is run asynchronously), a memory leak may cause the server to run out of memory. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV00911 Issues(s): 11-14050 Description: MAXIMO 7115 - PMWOGEN CRASHES SERVER WHEN LOCATION RECORDS HAVE NUMEROUS ATTACHMENTS, AND THE JOBPLANS HAVE MULTIPLE TASKScclo Database Scripts: N/A Manual Changes: N/A --- APAR #: IV11078 Issues(s): 11-17275 Description: CANNOT REMOVE/DELETE COMMODITY GROUPS(INVENTORY RESOURCE CODES) IN CHART OF ACCOUNTS APPLICATION. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV11089 Issues(s): 11-17278 Description: Error in Invoice application when Work Order status Internal Value and Value are different for seperate sites Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ77963 Issues(s): 10-15464 Description: KPI GRAPH Y-AXIS INCORRECT VALUES Database Scripts: N/A Manual Changes: N/A --- APAR #: IV09913 Issues(s): 11-16875 Description: When an Asset has a Meter Group associated, and then the Asset is moved to a different site, new Meters cannot be added to the Meter Group in the new Site Database Scripts: N/A Manual Changes: N/A --- APAR #: IV06186 Issues(s): 11-15412 Description: DB ERRORS WHILE CREATING/SAVING ACTIVITES/TASKS Database Scripts: HF7117_31.dbc Manual Changes: N/A --- APAR #: IV09061 Issues(s): 11-16575 Description: In the Job Plans application, the lookup for Site shows all sites even if user does not have access to those sites. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV08076 Issues(s): 11-16158 Description: RUNNING MAINTENANCE COST ROLLUP UPDATE REPORT SETS ROLLUP=1 FOR EVERY TRANSACTION OF THAT ASSET Database Scripts: N/A Manual Changes: Manually re-import the report ASSET/asset_costrollup_update.rptdesign --- APAR #: IV11909 Issues(s): 11-17524 Description: NEW CLASSIFICATION ATTRIBUTRES ARE LOST WHEN AN ASSET IS MOVED BACK TO IT'S ORIGINAL SITE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV09038 Issues(s): 11-16576 Description: COMPILATION OF JSP FILE '/WEBCLIENT/COMMON/TABLEDOWNLOAD.JSP' FAILED ERROR MESSAGE BEING RECEIVED WHEN TRYING TO USE DOWNLOAD Database Scripts: N/A Manual Changes: N/A --- APAR #: IV10542 Issues(s): 11-17128 Description: WHEN CHANGING A USER PASSWORD VIA THE MIF 2 MAIL NOTIFICATIONS ARE RECIEVED. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV11336 Issues(s): 11-17441 Description: SYSTEM MESSAGE PREFIX DISPLAYED EVEN IF MAXMESSAGES.PREFIX SET TO 0. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV11618 Issues(s): 11-17413 Description: PREDECESSORS IN WORKPLANS ARE NOT SET CORRECTLY DEPENDANT ON THE SITEID Database Scripts: N/A Manual Changes: N/A --- APAR #: IV12382 Issues(s): 11-17628 Description: NULLPOINT EXCEPTION ERROR WHEN SETTING VALUE FOR PRLINE.GLDEBITACCT ATTTIBUTE VIA ESCALATION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV10445 Issues(s): 11-17066 Description: TIME CONVERSION APPLIED TO ACTUAL START AND ACTUAL FINISH BASED ON TIME ZONE SETTING IN PROFILE. Database Scripts: HF7117_33.dbc Manual Changes: N/A --- APAR #: IV10063 Issues(s): 11-16905 Description: DUPLICATED WORK ORDER CREATES WO WITH MISSING TASK NUMBERS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV12415 Issues(s): 11-17643 Description: MXPC INTERFACE PERMITS MULTIPLE APPR REVISIONS OF SAME CONTRACT Database Scripts: N/A Manual Changes: N/A --- APAR #: IV12364 Issues(s): 11-17618 Description: INCORRECTLY RECEIVE "BMXAA7335E - GRANDCHILD AND LOWER-LEVEL CATEGORIES CANNOT CONTAIN ONE-TO-MANY RELATIONSHIPS" AFTER CHANGING PARENT CATEGORY. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV10541 Issue(s): 11-17099 Description: When Company and Contract Currency are not the same and PR currency and Contract currency are not the same, multiple POs are created. The expected result is that one PO Database Scripts: N/A Manual Changes: N/A --- APAR #: IV12505 Issue(s): 11-17659 / 10-20936 Description: NO RECORDS BEING SHOWN FOR PIE / BAR CHART OF A WORKORDER Database Scripts: N/A Manual Changes: N/A --- APAR #: IV11056 Issue(s): 11-17261 Description: LOGOUT FUNCTION DOES NOT WORK Database Scripts: N/A Manual Changes: N/A --- APAR #: IV12386 Issue(s): 11-17630 Description: DURATION FIELDS FOR TABLE DOWNLOAD NEED TO BE DOWNLOADED WITH THE FORMAT OF H :MM Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ97234 Issue(s): 11-12729 Description: If you change the date or time of a scheduled report then it does not run on new date/time, it runs on the original date/time. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV13095 Issue(s): 12-10195 TICKET.APPVALIDATE() METHOD DOES NOT RECORD OWNER HISTORY CORRECTLY, DOES NOT ACCOUNT FOR ASSIGNED OWNER GROUP CHANGES Database Scripts: N/A Manual Changes: N/A --- APAR #: IV12957 / IV12575 Issue(s): 12-10174 / 12-10091 Description: EXPIRED ENTRIES ARE NOT REMOVED FROM BULLETINBOARD TABLE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV09924 Issues(s): 11-16873 Description: USER DOES NOT RECEIVE A MESSAGE WHEN DUPLICATING A PROBLEM TICKET Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ86522 Issues(s): 10-18847 Description: In the Asset application, you cannot create relationships using shared features as reference points. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV11553 Issues(s): 11-17388 Description: DEADLOCK ON INCIDENTIMTICKETAPPBEAN CAUSING OOM Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ96940 Issues(s): 11-12489 Description: START DATE AND ESTIMATED NEXT DUE DATE SHOWING INCORRECT. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV14278 Issues(s): 12-10510 Description: Check if Mbo is zombie to eliminate NullPointer Exception Database Scripts: N/A Manual Changes: N/A --- APAR #: IV09810 Issues(s): 11-16822 Description: changing safety plan on WO , there are more records than expected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV12097 Issues(s): 11-17566 Description: ESTLABCOST IS INCORRECT WHEN ESTIMATE IS CHANGED AFTER APPROVAL Database Scripts: N/A Manual Changes: N/A --- APAR #: IV12035 Issues(s): 11-17547 Description: UNABLE TO SEND OUT MORE THAN ONE EMAIL NOTIFICATION FROM A WORK ORDER CHANGE STATUS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV13293 Issues(s): 12-10270 Description: SEARCHING FOR A VALUE FOR AN ATTRIBUTE ONLY DOES AN EXACT SEARCH. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV12063 Issues(s): 11-17553 Description: INCORRECT MEASUREMENT ASSET MEASUREMENT HISTORY REPORT Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89675 Issue(s): 10-20340 Description: When you click the Reports menu for the first time, more than 100 cursors are opened and these cursors are not closed immediately. Database Scripts: N/A Manual Changes : N/A --- APAR #:IV12360 Issues(s): 11-17616 Description: DATABASE ERROR WHEN MOVING ASSETS FROM ONE SITE TO A PREVIOUS SITE WITH INACTIVE PMs. Database Scripts: N/A Manual Changes: N/A --- APAR #:IV12774 Issues(s): 12-10087 Description: MIF ENTERPRISE SERVICE MXASSETINTERFACE CREATES UNNECESSARY ASSETTRANS MOVE HISTORY WHEN XML FILE PARENT ELEMENT IS EMPTY. Database Scripts: N/A Manual Changes: N/A --- APAR #:IV09817 Issues(s): 11-16829 Description: BMXAA0188E OCCURS ON IMPORTING CLASSIFICATIONS FROM DEVELOPER BENCH. Database Scripts: N/A Manual Changes: N/A --- APAR #:IV02272 Issues(s): 11-14511 Description: NULL POINTER EXEPTION WHEN SENDING COMMUNICATION TEMPLATE. Database Scripts: N/A Manual Changes: N/A --- APAR #:IV15689 Issues(s): 12-10880 Description: UNABLE TO ASSOCIATE AN ASSET TO 2+ SERVICES IN THE MIF. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99307 Issue(s): 11-13452 Description: In Report Administration application, if you try to create new Data Sources in an upgraded database, an error occurs and the following message is shown: "BMXAA4195E - Required Field Data Source Name is blank." Database Scripts: HF7117_34.dbc Manual Changes: N/A --- APAR #: n/a Issue(s): 12-10390 Description: Integrity Checker Errors introduced during 712x to 75 Upgrade Database Scripts: N/A Manual Changes: N/A --- APAR #: IV15987 Issue(s): 12-10972 Description: In PM application when trying to add a new meter to a PM, the newly added meter disappears on save and is not added to the database. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ99570 Issue(s): 11-13549 Description: In the Preventive Maintenance application, when you check the "Use Last WO Start information to Calculate Next Due Frequency" after inserting meter readings with all check boxes unchecked, the estimated meter readings are not calculated correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ63142 Issues(s): 09-20386 Description: In Maximo Enterprise Adapter, when you try to load xml information using cron tasks, the following error message is displayed: "ORA-00001: UNIQUE CONSTRAINT (NAASY1C.MAXINTMSGTRK_X1) VIOLATED." Database Scripts: N/A Manual Changes: N/A --- APAR #: IV10836 Issues(s): 11-17173 Description: Removed unnecessary column redefintion that took a long time to process. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV14276 Issues(s): 12-10505 Description: USER INPUT MESSAGES ARE PRINTED INTO SYSTEMOUT.LOG Database Scripts: N/A Manual Changes: N/A --- APAR #: IV15459 Issues(s): 12-10828 Description: PASSWORD CHANGE NOTIFICATION SENT BEFORE THE NEW PASSWORD IS COMMITED TO THE DATABASE Database Scripts: N/A Manual Changes: N/A --- APAR #: IV16606 Issues(s): 12-11194 Description: SAVED QUERY NOT AVAILABLE UNDER PULL-DOWN MENU Database Scripts: N/A Manual Changes: N/A --- APAR #: IV16610 Issues(s): 12-11193 Description: QUERY IS NOT EXECUTED AS DEFAULT QUERY AFTER DEPLOYING HOTFIX 7.1.1.7-LA20111221-1322 Database Scripts: N/A Manual Changes: N/A --- APAR #: IV05284 Issues(s): 11-15360 Description: IN RECEIPTS, SELECT ORDERED ITEMS, RECORDS NOT SORTING BY POLINENUM. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV12514 Issue(s): 11-17668 Description: TWO APPROVED CONTRACT REVISIONS FOR SAME CONTRACT Database Scripts: N/A Manual Changes: N/A --- APAR #: IV09474 Issue(s): 11-16750 Description: In the Work Order application, tasks do not get correctly copied from job plans if the job task identifier is zero and the error "BMXAA4195E - Required field Task is blank." occurs when you save the work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV17389 Issue(s): 12-11457 Description: WHEN WORK ORDER HIERARCHY REPORT IS RUN, IT CAUSES MAJOR SLOW DOWN OF THE SERVER DUE TO INEFFECTIVE QUERY IN THE REPORT Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ94683 Issues(s): 11-11218 Description: In the Invoice Application, if you split the total amount of a PO in a series of receipts and copy this PO to a new Invoice, the invoice cannot be approved once the po receipt is completed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV18044 Issues(s): 12-11629 Description: "BMXAA4160E - A MAJOR EXCEPTION HAS OCCURRED" WHILE TRYING TO CHANGE THE METER FREQUENCY ON A PM. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV18080 Issues(s): 12-11661 Description: FILTERING IN THE QUOTATIONS TAB IN RFQ APPLICATION CLEARS THE DATA IN THE ORDER UNIT FIELD Database Scripts: N/A Manual Changes: N/A --- APAR: IZ89628 Issue(s): 10-20299 Description: In the Assets application, if the parent attribute is set on a WORKORDER object, or on a object that extends WORKORDER, and the owning object is not a WORKORDER or object that extends WORKORDER, the following error occurs: "BMXAA4176E - Attribute ISTASK does not exist". Database Scripts: N/A Manual Changes: N/A --- APAR: IZ96940 Issue(s): 11-12489 Description: START DATE AND ESTIMATED NEXT DUE DATE SHOWING INCORRECT. Database Scripts: N/A Manual Changes: N/A --- APAR: IV15763 Issue(s): 12-10921 Description: CAN EDIT READONLY FIELDS WHEN CANCEL IS CLICKED DURING WORK ORDER DUPLICATION WITH TASKS. Database Scripts: N/A Manual Changes: N/A --- APAR: IV08550 Issue(s): 11-16362 Description: EMAIL IS SENT ALTHOUGH REQUIRED FIELD IS BLANK Database Scripts: N/A Manual Changes: N/A --- APAR: IV17928 Issue(s): 12-11528 Description: RECORD HAS BEEN UPDATED BY NAOTHER USER ERROR WHEN FLOWCONTROL USED AND ACTIVITY CANCELED IN FLOW. Database Scripts: N/A Manual Changes: N/A --- APAR: IV08046 Issue(s): 11-16159 Description: PROBLEM WITH DUPLICATING TICKET(INCIDENT/SR/PROBLEM) WITH ACTIVITIES Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ88730 Issue(s): 10-19870 Description: In Rpt: Harrier Reports, scheduled report do not work when there is a date parameter in the report design. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV19821 Issue(s): 12-12199 Description: NOSTATUS ACTION DOES NOT WORK WHEN USED AGAINST ASSET IN WORK FLOW PROCESS. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV20140 Issue(s): 12-12407 Description:INVOICE NOT CALCULATING LIMITS ACCORDING TO EXCHANGE RATES IN MAXIMO 7.1.1.7 (INCORRECT ERROR MESSAGE). Database Scripts: N/A Manual Changes : N/A --- APAR #: IV19718 Issue(s): 12-12152 Description:Problem on WorkOrder Status synonyms. When user creates synonym as PLAN for 3 diferent organizations, Maximo is not able to add Labtrans records to a WORKORDER. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ86282 Issue(s): 10-19114 Description: CREATING AN SR FROM QUICK INSERT DOES NOT APPLY THE TICKET TEMPLATE. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV00104 Issue(s): 11-13733 Description: Error relating a record to a closed ticket. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV20234 Issue(s): 12-12487 Description: CONTACT FIELD ON PR/PO DOES NOT GET UPDATED CORRECTLY. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV00835 Issues(s): 11-14028 Description: In the Work Order application, if you try to create a record with a "Fail Prompt" worktype, the record fails to be validated when you click the "Complete" WO button. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV16447 Issues(s): 12-11125 Description: A REQUIRED DATE PARAMETER ON A REPORT PRODUCES BMXAA3556E - NULL IS A REQUIRED FIELD. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ96548 Issues(s): 11-12309 Description: In the Inventory application, when you edit a saved Primary Vendor, an error occurs and you cannot save the changes made. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV14319 Issues(s): 12-10537 Description: BMXAA4214E - AN UNKNOWN ERROR HAS OCCURRED WHEN YOU CLICK ON REFRESH WHEN ATTEMPTING TO CHANGE THE PHYSICAL COUNT DATE Database Scripts: N/A Manual Changes: N/A --- APAR #: IV20573 Issues(s): 12-12650 Description: SLOW PERFORMANCE IN BRINGING UP A CI RECORD WITH CI SPECIFICATON ATTRIBUTES ASSOCIATED WITH DOMAINS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV21437 Issues(s): 12-13018 Description: METER DOESN'T APPEAR IN THE ENTER METER READINGS DIALOG UNTIL THE RECORD IS SAVED. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV21355 Issues(s): 12-12966 Description: UNABLE TO CREATE A PO USING THE MIF WHEN THE GL DEBIT ON THE PR IS INVALID. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV03601 Issues(s): 11-15012 Description: ERROR SENDING PO WITH CONTRACT REFERENCE FROM SAP TO MAXIMO BMXAA3326E Database Scripts: N/A Manual Changes: N/A --- APAR #: IV20296 Issue(s): 12-12526 Description: Asset Site Field is read only after setting a location value Database Scripts: N/A Manual Changes : N/A --- APAR #: IV21352 Issue(s): 12-13111 Description: RECORD ALREADY EXISTS ERROR WHEN SENDING A CREATE AND UPDATE MESSAGE IN THE SAME SECOND. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV06992 Issue(s): 11-15651 Description: WOPRINT REPORT PRINTS WO TWICE ON REPORT OUTPUT (PDF) Database Scripts: N/A Manual Changes : N/A --- APAR #: IV08542 Issue(s):11-16354 Description: INACTIVE PEOPLE CAN BE SELECTED IN THE USER INFORMATION IN THE TICKET APPLICATIONs. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ84834 Issues(s): 10-18009 Description: In the Reorders application, if you reorder items for a site that is not the same as the one currently set as your default insert site, the PR created uses the prefix for your default site to create the PR number. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ96610 Issues(s): 11-12366 Description: In the Reorder application, when you have multiple sites in different organizations and you run the Crontask after specifying the directissue parameter, the PR created is generated for an incorrect organization. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV11090 Issues(s): 11-17274 Description: UNABLE TO INACTIVATE MULTIPLE PM RECORDS AT ONCE FROM THE LIST SCREEN IF THEY HAVE CHILDREN Database Scripts: N/A Manual Changes: N/A --- APAR #: IV21732 Issues(s): 12-13172 Description: ATTEMPT TO APPLY 2 SLAS IN SR WORKFLOW FAILS Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ88582 Issues(s): 10-19799 Description: In the Inventory application, when you are creating an inventory transaction to or from a GL Account, and you stop the messaging engine and compete the transaction, the following error message is displayed: "Error in saving message transaction." Database Scripts: N/A Manual Changes: N/A --- APAR #: IV07263 Issues(s): 11-15793 Description: In the Inventory application, if you try to save using the IssueCurrentItem object, an error occurs and the error messages appear with unresolved parameters. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV19197 Issues(s): 12-12029 Description: ATTACHED DOCUMENT QUERY REDUCES WORK ORDER TRACKING PERFORMANCE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV21676 Issue(s): 12-13114 Description: WRONG SLA IS SELECTED Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ99296 Issue(s): 11-13447 Description: MAXIMO OR REPORT DOES A DOUBLE ENCODING WHEN THE ATTACHED DOCUMENT CONTAINS %20 IN THE NAME. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV02195 Issue(s): 11-14455 Description: When you dupplicate the Location or the Aseets applications, the drilldown menu does not behave as it should. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV20929 Issue(s):12-12889 Description: ASSET APPLICATION NEW ASSET OPEN DRILLDOWN FROM LOCATION FIELD OPENS ON ASSET TAB. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV23071 Issue(s):12-13530 Description: PROBLEM ON WORKORDER STATUS SYNONYMS WHEN USING MULTIPLE ORGS - CANNOT USE VALID WORK ORDERS IN LABOR REPORTING. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV14196 Issue(s):12-13985 Description: Decomissioned Locations shown in Ticket dialog Database Scripts: N/A Manual Changes : N/A --- APAR #: IV24203 Issue(s):12-13790 Description: SESSIONS ARE NOT BEING RELEASED Database Scripts: HF7117_37.dbc Manual Changes : --- APAR #: IV23347 Issue(s):12-13608 Description: REQUIRED SPACE CALCULATION IS WRONG Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ77991 Issue(s): 10-15463 Description: In the Item Master application, when you use Advanced Search to look for a vendor using the INVVENDOR.VENDOR attribute, no records are displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV18364 Issue(s): 12-11766 Description: WO TASKS STATUS CHANGE WHEN AFTER ATTACHING A FILE TO ONE OF THE TASKS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV25234 Issue(s): 12-13998 Description: ADDCHANGE ACTION ON MIF INVOICE INBOUND PROCESSING ERRORS OUT Database Scripts: N/A Manual Changes: N/A --- APAR #: IV24097 Issue(s): 12-13743 Description: WORKLOG ENTRIES ARE NOT DISPLAYED CORRECTLY IN INCIDENTS OR SERVICE REQUESTS OR PROBLEMS APPLICATIONS Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ98911 Issue(s): 11-13335 Description: When a new parameter is added to a report and the request page is generated, other users in different JVMs are unable to see this new parameter in a clustered environment. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01022 Issue(s): 11-14060 Description: INVALID BINDING ERROR WHEN CHANGING THE STATUS OF AN SR Database Scripts: N/A Manual Changes: N/A --- APAR #: IV27355 Issue(s): 12-14251 Description: MIGRATION MANAGER CHANGE PACKAGE FAILS MIGRATING OBJECTS WITH MULTILANGUAGE SUPPORT Database Scripts: N/A Manual Changes: N/A --- APAR #: IV22076 Issue(s): 12-13333 Description: THE ENTERED VALUE RIGHT IS NOT VALID. ENTER A VALID INTEGER VALUE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV26700 Issue(s):12-14162 Description: ALLOWING TO RECEIVE MORE THAN ORDERED AFTER SELECT ITEMS FOR RETURNS IN THE RECEIVING APP. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV25582 Issue(s):12-14052 Description: INPUT MODE TEXT "REQUIRED" IS DISPLAYED IN LONGDESCRIPTION FIELD IN INCIDENT WHEN YOU HIGLIGHT THE TEXT IN DETAILS FIELD. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV27297 Issue(s):12-14248 Description: FORGOT PASSWORD LINK GIVE ERROR BMXAA5636E Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30804 Issue(s): Defect 60236 Description: When entering location meter reading through UI or MEA, got error "BMXAA2906E-Readings cannot share the same reading date and time" due to null ASSETTRANS.TOLOC value not being handled as expected in SQL that determines what assets were in the location on the reading's date. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV06555 Issue(s): 11-15489 Description: In the Purchase Requisitions application, purchase requisition records have incorrect total costs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ89286 Issue(s): 10-20079 Description: COMMLOGDOCS RECORDS ARE NOT CREATED IN SR APP. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV31309 Issue(s): defect # 61806 Description: QUALIFICATIONS STATUS CHANGES DO NOT RECORD TIME Database Scripts: Run HF7117_36.dbc Manual Changes: N/A --- APAR #: IZ95542 Issue(s): defect # 11-11773 Description: CANNOT SET LONGDESCRIPTION TICKET FIELDS FROM ACTIONS RESULTING IN ERROR BMXAA3055E-THIS TYPE OF THIS EXPRESSION IS UNKNOWN Database Scripts: N/A Manual Changes: N/A --- APAR #: IV32724 Issue(s): 63944 Description: Meter data import does not trigger work order generation as expected. Even if the threshold is exceeded, a work order is not generated. However, on the next reading (even if it is as small as 1), the work order is generated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV08196 Issue(s): 11-16281 Description: SERVICE RECEIVED LINE COST UPDATING BEFORE RECEIPTS ARE COMPLETED. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV31835 Issue(s): 12-14567 Description: PACKING SLIP DOES NOT POPULATE ITEM FOR RETURN RECORD WHENPOPULATED IN THE SELECT ITEMS FOR RETURN DIALOG BOX. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV31233 Description: Base Services IFIX 7117 SINGLE QUOTE IN GROUP NAME PRODUCES ERROR ON START CENTER Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30813 Issue(s): 64679 Description: TERMS AND CONDITIONS ON APPROVED POS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV11553 Issue(s): 11-17388 Description: DEADLOCK ON INCIDENTIMTICKETAPPBEAN CAUSING OOM Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34273 Issue(s): 73137 Description: AFTER ADDING WORK ORDER TASK TO DEFAULT TABLE DATA, CREATING NEWROW AND CHANGE LINE TYPE CAUSES TASK NUMBER TO BLANK Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36538 Issue(s): 76506 Description: THE AVAILABLE BALANCE WILL BECOME NEGATIVE AS A RESULT OF THIS TRANSACTION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV20234 Issue(s): 12-12487 Description: (rework) CONTACT FIELD ON PR/PO DOES NOT GET UPDATED CORRECTLY. Database Scripts: N/A Manual Changes : N/A --- APAR #:IV25696 Defect: 76527 Description: Site id for work orders is mistakenly updated / changed. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV37712 Defect: 80608 Description: PURCHASE CONTRACT - REORDER IGNORING PURCHASE CONTRACT LINE STATUS. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV37718 Defect: 80446 Description: START TIMER WON'T START Database Scripts: N/A Manual Changes : N/A --- APAR #: IV37995 Defect: 81300 Description: On PO/PR line, storeroom location becomes editable and direct issue flag is set to false when the location (not storeroom location) is cleared. This occurs even if line still has work order or asset for direct issue. The problem is that the user can specify a storeroom at this point. The line then has a storeroom and asset or work order information. Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ95897 Defect: 78490 Description: In the Receipts application, after you change the exchange rate of a PO from EUR or USD to another value, the MATRECTRASN.OLDAVGCOST does not get automatically populated when you try to receive an item. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33979 Defect: 76843 Description: ERROR ATTACHING JOB PLAN ON RETURN WITH VALUE IN JOB PLANS Database Scripts: N/A Manual Changes : N/A --- APAR #: IV07543 Defect: 84365 Description: HTML FORMAT TO THE E-MAIL LISTENER ARE NOT CONVERTED TO TEXT WHEN DISPLAYED IN THE SR Database Scripts: N/A Manual Changes : N/A --- APAR #: IZ87771 Defect: 81732 Description: BASE SERVICES LAFIX MAXIMO 7117 for APAR IZ87771 XXS risk Database Scripts: N/A Manual Changes : N/A --- APAR #: IV36538 (rework) Issue(s): 76506 Description: THE AVAILABLE BALANCE WILL BECOME NEGATIVE AS A RESULT OF THIS TRANSACTION Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ98777 Issue(s): 83724 Description: SCROLL PROBLEMS IN MAXIMO PRODUCT PANELS USING FIREFOX BROWSER Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39184 Issue(s): 84983 Description: REORDER THE APPENDING OF WHERE CLAUSES Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34568 Issue(s): 89453 Description: BASE SERVICES 7.1.1.7 LAFIX - DAYLIGHT SAVINGS TIME START DATE CAUSE PROBLEMS ON DATE FIELDS WHERE NO TIME INFORMATION ENTERED Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39444 Issue(s): 88448 Description: WHERE CLAUSE WITH ORDER BY CAUSES BMXAA4210E - DATABASE ERRORNUMBER 4112 HAS OCCURRED. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39515 Issue(s): 87440 Description: Clickjacking risk from HTTP response header that does not include X-Frame-Options field. Database Scripts: N/A Manual Changes: 1) Open deployment descriptor (applications\maximo\maximouiweb\webmodule\WEB-INF\web.xml) with text editor. 2) Add the following filter and filter-mapping sections: HttpXFrameOptionsFilter psdi.webclient.system.filter.HttpXFrameOptionsFilter X-Frame-Options SAMEORIGIN HttpXFrameOptionsFilter /* 3) Save file. 4) Build and redeploy ear file. --- APAR #: IV40060 Issue(s): 88106 Description: Basic reflected javascript injection. Database Scripts: N/A Manual Changes: 1) Open deployment descriptor (applications\maximo\maximouiweb\webmodule\WEB-INF\web.xml) with text editor. 2) Add or uncomment the following filter and filter-mapping sections: HttpCrossSiteScriptingSecurity psdi.webclient.system.filter.HttpCrossSiteScriptingSecurity script script HttpCrossSiteScriptingSecurity /webclient/utility/* 3) Save file. 4) Build and redeploy ear file. --- APAR #: IV39186 Issue(s): 85050 Description: RESULT SET SETUP - COLUMN DISPLAY - ORDER GREATER THAN 0APPEARING AT THE END OF THE RESULT SET Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39544 Issue(s): 92760 Description: NON-ASCI FILE NAMES IS NOT HANDLED BY THE CODE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV43940 Issue(s): 94525 Description: In the 'Move/Modify Assets' dialog on the 'Users and Custodians'>'Modify All' tab user gets error "BMXAA2648E - One person must be designated as primary." when trying to delete primary user or custodian. This is correct. However, if the user then changes person value to a new, non-primary value and clicks 'Apply' and 'OK', both persons (the primary and the non-primary) are deleted from the asset. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45041 Issue(s): 101579 Description: ATTACHMENTS FROM TASKS OF A WORKORDER DO NOT GET COPIED TO DUPLICATED WORKORDER TASKS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV27273 Issue(s): 100411 Description: CALENDAR POP-UP SOMETIMES DOES NOT HAPPEN ON FIREFOX 10 Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45367 Issue(s): 99038 Description: E-SIGNATURE IS NOT PROMPTED WHEN YOU SET THE SECURITY CONTROLOPTION IN THE USERS OR SECURITY GROUPS APP Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46770 Issue(s): 102743 Description: SECURITY GROUP DOES NOT HAVE ACCESS TO ADJUST CURRENT BALANCEARE ALLOWED VIA INVENTORY BALANCES SECTION NEW ROW BUTTON Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39521 Issue(s): 107766 Description: PM.LASTSTARTDATE is not updated when a work order is canceled. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV31300 Issue(s): 107774 Description: When canceling a work order that has a job plan and a PM, the job plan on the PM is reset to the job plan that was added on the work order even if the job plan is not on the PM. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV19814 Issues(s): 12-12192 Description: SYSTEM MESSAGE LOOPS WHEN TRYING TO CANCEL A WO FROM PM WITH EXTENDED DATE BEING USED ON PM RECORD Database Scripts: N/A Manual Changes: N/A --- APAR #: IV31576 Issues(s): 104423 Description: BMXAA2652E - THE RECORD DESIGNATED AS PRIMARY CANNOT BE DELETEDWHEN TRYING TO MOVE AN ASSET. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49960 Issues(s): 108616 Description: ONLY FIRST VENDOR DISPLAYED WHEN MULTIPLE ASSETS ARE SELECTED FOR ASSET DETAILS REPORT ERROR DESCRIPTION. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50298 Issues(s): 111023 Description: If I add two tasks in a change it is possible to set the same predecessor for each other task. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV09227 Issues(s): 111739 Description: Error BMXAA0024E - ADD is not allowed on JOBPLAN encountered when executing Work Order Tracking action 'Create Job Plan' on a closed work order. Manual Changes: N/A --- APAR #: IV51598 Issues(s): 113873 Description: If the PMWogenCronTask 'Run as' user does not have authority to set GL components, "BMXAA0019E - FIELD GL ACCOUNT IS READ-ONLY" error will be encountered when the cron task runs. Work orders will not be generated. Manual Changes: N/A --- APAR #: IV52628 Issues(s): 116204 Description: REQUIRED DATE FOR PLANNED MATERIAL ON CHILD WORKORDERS IS NOT THE SAME AS THE ONES FOR MAIN WORKORDER Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51964 Issues(s): 118039 Description: MATRECTRANS.LINECOST IS NOT CORRECT Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51972 Issues(s): 118062 Description: MATUSETRANS.LINECOST IS NOT CORRECT Database Scripts: N/A Manual Changes: N/A --- APAR #: IV03215 Issues(s): 118287 Description: PRLINES should be restricted to the PO SITEID Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51630 Issues(s): 116665 Description: BULLETIN BOARD DISPLAYS WRONG COUNTER TOTAL Database Scripts: N/A Manual Changes: N/A --- APAR #: IV17350 Defect: 122137 Description: ESCALATION TASK TAKING UP EXCESSIVE DATABASE CONNECTIONS AND SHUTTING DOWN THE ENVIRONMENT. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51496 Defect: 113499 Description: When application saved query has new lines, column names of the where clause passed to the report does not get fully qualified by table name. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55504 Defect: 123952 Description: PDF attachments with annotations are not printed properly while printing attachments using report direct print. Also a added a System Property mxe.report.directprint.papersourceselection. When value of this property is true then it works like "Choose paper source by PDf page size". Otherwise it will compress the size of the page to fit papersize. Database Scripts: HF7117_41.dbc Manual Changes: N/A --- APAR #: IZ80462 Defect: 125818 Description: SYSTEM GENERATED TWO RESERVATIONS WITH QUANTITY OF 1. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56027 Defect: 125578 Description: If vendor is not valid, PR should be able to re-approve from PO. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51630 Defect: 127215 Description: Bulletin Board count in Start Center does not get updated Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59979 Defect: 132683 Description: INVENTORY_ROP REPORT LISTS STRANGE CONVERSION RATES FOR ITEMS WITH ISSUE UNITS & ORDER UNITS OF EACH. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV26377 Defect: 135892 Description: HEADER INJECTIONS / SECURITY VULNERABILITY Database Scripts: N/A Manual Changes: N/A --- APAR #: IV08015 Defect: 140562 Description: VERY LARGE MBO COUNTS FOR SERVRECTRANS WHILE INVOICE IS PROCESSING IN WORKFLOW. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62253 Defect: 142231 Description: UNABLE TO CHANGE STATUS OF A PURCHASE CONTRACT, NULL POINTER EXCEPTION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56680 Defect: 142078 Description: Persistent XSS in KPI display name field / portlet various fields. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55717 Defect: 142355 Description: Receipt status on po is changing to partial from none on complete receipt even if no lines were received. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45533 Defect: 144448 Description: Interaction nodes not working as they should in Everyplace. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61647 Defect: 138405 Description: THE PERSON GROUP REPORT DOES NOT RETURN ALL THE NAMES. SOME GROUPS ARE SHOWN WITH ONLY PARTIAL DATA. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ98825 Defect: 142655 Description: ISSUES AND TRANSFERS PERFORMANCE ISSUE WITH LOCATION STOREROOM SQL Database Scripts: N/A Manual Changes: N/A --- APAR #: IV29077 Issues(s):62786 Description: ATTRIBUTE SEARCHING WITH NULL NOT WORKING Database Scripts: N/A Manual Changes: N/A --- APAR #: IV14960 Issues(s):145428 Description: DB CONNECTION LEAK ON CROSSOVERDOMAIN. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61925 Defect: 140187 Description: JAPANESE CHARACTERS SHOWN AT THE TOP OF THE SCREEN UNEXPECTEDLY. Database Scripts: N/A Manual Changes: N/A --- ==================================================================================================== V. Notices ==================================================================================================== This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to: Intellectual Property Licensing Legal and Intellectual Property Law IBM Japan, Ltd. 1623-14, Shimotsuruma, Yamato-shi Kanagawa 242-8502 Japan The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact: IBM Corporation 2Z4A/101 11400 Burnet Road Austin, TX 78758 U.S.A. Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee. The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us. Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products. All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. If you are viewing this information softcopy, the photographs and color illustrations may not appear. Trademarks IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at Copyright and trademark information at www.ibm.com/legal/copytrade.shtml. Adobe, the Adobe logo, PostScript, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States, and/or other countries. Java and all Java-based trademarks and logos are trademarks of Oracle and/or its affiliates. Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. Intel, Intel logo, Intel Inside, Intel Inside logo, Intel Centrino, Intel Centrino logo, Celeron, Intel Xeon, Intel SpeedStep, Itanium, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries.