IBM Corporation --- IBM(R) Maximo(R) Base Services Release 7.1.1.13 Interim Fix Build: 011 Date: May 29, 2015 IBM Corporation Note: Before using this information and the product it supports, read the information in the Notices section at the end of this document. (C) Copyright International Business Machines Corporation 2011, 2015. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. =============================================================================================== Table of Contents =============================================================================================== I. Introduction II. Resource Information III. Installation Instructions IV. Manual Changes V. Issues Resolved VI. Notices =============================================================================================== I. Introduction =============================================================================================== Product : Maximo Base Services Version : Release 7.1.1.13 Dependencies : NONE PREREQUISITES : Maximo Base Services Release 7.1.1.13 has been installed CO-REQUISITES : NONE A Interim Fix is a group of critical issues that have been repaired since the product fix pack or patch was released. The Interim Fix is cumulative and may contain other fixes in addition to the issues that affect your site. The Interim Fix must be applied in full in order to be supportable. Customers should validate this Interim Fix by installing it in a test environment before rolling it out to a production environment. Interim Fixes, by their very nature, go through a limited quality assurance cycle and may not be included in the latest available program patch. =============================================================================================== II. Resource Information =============================================================================================== Knowledge center URL: http://www-01.ibm.com/support/knowledgecenter/SSLKT6_7.1.0/com.ibm.mam.doc_7.1/mam_welcome.htm Description: Access the information center to view the product documentation. Topics include product overviews; installation and configuration tasks; instructions for using, administering, and troubleshooting the product; and security information. Asset Management community on Service Management Connect URL: https://www.ibm.com/developerworks/servicemanagement/am/ Description: Use Service Management Connect to access the product's blogs, wikis, forums, and communities. In Service Management Connect you can review information such as best practices, performance and tuning, and product integrations. You can also collaborate with IBM experts and the broader user community and access continuous open betas. IBM Maximo Asset Management support resources portal http://www-947.ibm.com/support/entry/portal/overview/software/tivoli/maximo_asset_management Description: The IBM support resources portal provides access to tools and resources to keep your systems, software, and applications running smoothly. From the support resources portal you can find fixes, service requests, useful links and an enhanced search to help you find information quickly. =============================================================================================== III. Installation Instructions =============================================================================================== NOTE For Microsoft Windows 2008 users, you must log in as an administrator before you upgrade to a Maximo Asset Management interim fix pack. If you attempt to upgrade when you are not logged in as an administrator, the installation fails. Follow these steps to apply this Interim Fix: 1 Ensure that no database configuration changes are pending. 2 Shut down the Maximo application server. 3 Back up the database. 4 Copy the Maximo directory. 5 Download the MBS_71113_LAFIX.20150513-1514.psi.zip 6 To start the PSI Installer, click All Programs > Tivoli base services > Process Solution Installer. 7 In the Introduction panel, click Next. 8 In the Choose PSI Package panel, click Choose, navigate to the MBS_71113_LAFIX.20150513-1514.psi.zip file, select the file, and click Open. 9 Follow the onscreen instructions. 10 Run the 'updatedb.bat' utility to run all the hot fix database scripts: a. At a DOS prompt, change directory to '\tools\maximo'. For example, c:\IBM\SMP\maximo\tools\maximo. b. Run 'updatedb.bat'. 11 Apply any manual updates listed in this readme.txt file. To find the manual updates for each APAR, the information related to the APAR in the Manual Changes section. 12 Delete the application server cache folders. For Oracle WebLogic Server, delete the 'cache' and 'tmp' folders in \user_projects\domains\mydomain\servers\AdminServer\. Example: C:\bea923\user_projects\domains\max711domain\servers\AdminServer\cache C:\bea923\user_projects\domains\max711domain\servers\AdminServer\tmp For IBM WebSphere(R) Application Server, delete the cahce folder in \AppServer\profiles\Custom01\temp\Node01\MAXIMOSERVER 13 Delete the Web browser cache on every computer that uses Maximo base services. 14 Rebuild and redeploy the EAR files, and then restart the application server. =============================================================================================== IV. Manual Changes =============================================================================================== APAR #: IV59604 Issue(s): 131365 Description: The LongOp dialog is not displayed in when using uploadfile control. Database Scripts: N/A Manual Changes: The long operation dialog will activate on the uploadfile control by changing the event from "loadData" to "dolongop". 1) In Application Designer, open EXTSYSTEM application. 2) Edit 'Data Import' dialog. 3) Open properties for upload file control. 4) Modify event from "loadData" to "dolongop". 5) Save changes. ---- APAR #: IV67420 Issue(s): 167725 Description: The Preventive Maintenance application generates an empty Project Labor report. Database Scripts: N/A Manual Changes: Requires import. How to publish it to Maximo: http://www-01.ibm.com/support/docview.wss?uid=swg21653964 --- ==================================================================================================== V. Issues Resolved ==================================================================================================== ----------------------------------------------------------------------------------------------- Begin IF001 (MBS_71113_LAFIX.20140731-1651.psi.zip) ----------------------------------------------------------------------------------------------- APAR #: IV62061 Defect: 139263 Description: In the Work Order Tracking application, when you enter a meter reading from the Detail menu on the Asset field in the Multiple Assets, Locations, and CIs table window, a null pointer exception occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62345 Defect: 140009 Description: When a PM-generated work order is canceled, the PM.NEXTDATE field is set to null. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59960 Defect(s): 136097 Description: When you apply the fix for APAR IV24726, the Or function no longer works in searches. Database Scripts: N/A Manual Changes: N/A ---- APAR #: IV59524 Defect(s): 131505 Description: When using a template to create a new requisition the storeroom location is not read only. Database Scripts: N/A Manual Changes: N/A ---- APAR #: IV60827 Defect(s): 134987 Description: The description field is Read Only until you enter data in one of the other fields when Conditional Properties are set. Database Scripts: N/A Manual Changes: N/A ---- APAR #: IV60744 Defect(s): 134991 Description: Crossover domain will always launch the same SQL twice. Database Scripts: N/A Manual Changes: N/A ---- APAR #: IV60960 Defect: 135444 Description: A read only user can save through the Select Work Orders buton on the Plans tab. Database Scripts: N/A Manual Changes: N/A ---- APAR #: IV60597 Defect: 134327 Description: In Move/Modify Dialog of the Assets application, user got error "BMXAA0157E - New Asset Number cannot be blank" after entering a work order number and clicked OK. Database Scripts: N/A Manual Changes: N/A ---- =============================================================================================== End IF001 (MBS_71113_LAFIX.20140731-1651.psi.zip) =============================================================================================== ----------------------------------------------------------------------------------------------- Begin IF002 (MBS_71113_LAFIX.20140818-1001.psi.zip) ----------------------------------------------------------------------------------------------- APAR #: IV59604 Issue(s): 131365 Description: The long operation dialog will activate on the upload file control by changing the event from LOADDATA to DOLONGOP. Database Scripts: N/A Manual Changes: The long operation dialog will activate on the uploadfile control by changing the event from "loadData" to "dolongop". 1) In Application Designer, open EXTSYSTEM application. 2) Edit 'Data Import' dialog. 3) Open properties for upload file control. 4) Modify event from "loadData" to "dolongop". 5) Save changes. --- APAR #: IV60852 Issue: 135121 Description: When you revise a warranty contract that has more than 46,000 related records, performance issues occur. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63329 Defect(s): 143664 Description: After you apply IFIX.20140731 or IFIX.20140710, when you select a hyperlink in a report, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62038 Defect(s): 138962 Description: In the Purchasing application, when you add a purchase order and change the inspection status, there are discrepancies in the receipt, transfer, and invoice line costs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62710 Defect(s): 141197 Description: The Route Workflow icon is not translated to French. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61949 Defect(s): 138530 Description: The Item field is readonly for linetype of Service or Material. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61225 Defect(s): 136604 Description: In the Activities and Tasks applications there are invalid bindings. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59068 Defect(s): 141565 Description: Maximo is allowing the current status change with current date and time when the previous status change was future dated. Database Scripts: N/A Manual Changes: N/A ============================================================================================== End IF002 (MBS_71113_LAFIX.20140818-1001.psi.zip) =============================================================================================== ----------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------- Begin IF003 (MBS_71113_LAFIX.20140930-1558.psi.zip) ----------------------------------------------------------------------------------------------- --- APAR #: IV42378 Defect: 146554 Description: Duplicates in the Task Scheduler table cause the database to deadlock. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV48001 Defect: 144142 Description: When you update a rotating item from SAP, the updated lot type has an incorrect value. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61925 Defect(s): 138432 Description: Japanese characters are unexpectedly displayed at the top of the screen. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63139 Defect(s): 142926 Description: When the same PO number is used for more than one site, issues occur when you reorder. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61647 Defect(s): 137905 Description: The Person Group report does not return all data. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63670 Defect(s): 144886 Description: Some hyperlinks in the BIRT report do not work and shows a blank report. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64824 Defect(s): 147655 Description: You are unable to close the Long Description dialog after you add new text and select the OK button. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61707 Defect(s): 137970 Description: When you update an Item Commodity code, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61963 Defect: 138611 Description: There is a difference in behavior between credit invoices and debit invoices. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64301 Issue(s): 146295 Description: When you load data on Websphere 7.0, the Maximo Integration Framework does not properly convert a flat file to an XML structure. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV62270 Defect: 139703 Description: The work order is deleted from Related Records incorrectly. Database Scripts: N/A Manual Changes: N/A --- ============================================================================================== End IF003 (MBS_71113_LAFIX.20140917-1334.psi.zip) =============================================================================================== APAR #: IV61647 Defect(s): 137905 Description: The Person Group report does not return all data. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63670 Defect(s): 144886 Description: Some hyperlinks in the BIRT report do not work and shows a blank report. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64824 Defect(s): 147655 Description: You are unable to close the Long Description dialog after you add new text and select the OK button. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61707 Defect(s): 137970 Description: When you update an Item Commodity code, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61963 Defect: 138611 Description: There is a difference in behavior between credit invoices and debit invoices. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64301 Issue(s): 146295 Description: When you load data on Websphere 7.0, the Maximo Integration Framework does not properly convert a flat file to an XML structure. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV62270 Defect: 139703 Description: The work order is deleted from Related Records incorrectly. Database Scripts: N/A Manual Changes: N/A --- ============================================================================================== End IF003 (MBS_71113_LAFIX.20140930-1558.psi.zip) =============================================================================================== ============================================================================================== Begin IF004 (MBS_71113_LAFIX.20141015-1456.psi.zip) =============================================================================================== APAR #: IV61690 Defect: 150138 Description: You cannot expand the Attribute table window. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61192 Defect: 136319 Description: Some querries on the Work Order table and Locations table cause Maximo to hang. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62270 Defect: 139703 Description: In the Work Order Tracking application, on the Related Records tab, deleted work orders are not displayed correctly. Database Scripts: N/A Manual Changes: N/A --- --- APAR #: IV60977 Defect(s): 135814 Description: "Select Records" option is missing. When you checked the option, it shows all records and then gives you the option to select all using the Top Check box. Database Scripts: N/A Manual Changes: N/A ---- APAR #: IV61925 Defect(s): 138432 Description: When you insert a Japanese character in the Asset field, the character is unexpectedly displayed at the top of the screen. Database Scripts: N/A Manual Changes: N/A ============================================================================================== End IF004(MBS_71113_LAFIX.20141015-1456.psi.zip) ============================================================================================== ============================================================================================== Begin IF005 (MBS_71113_LAFIX.20141112-1429.psi.zip) ============================================================================================== --- APAR #: IV57475 Defect(s): 128447 Description: When you implement LDAP and have the primary language set to French, the log out screen is in English. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63752 Defect: 145020 Description: In the Assignment Manager application, the Work Hours field has a negative value if the end date is modified and the shift is at night. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66459 Defect: 153357 Description: In the Issues and Transfers application, after you apply interim fix IZ98825, the maximum number of expressions in a list is 1000. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65548 Defect: 150494 Description: When you select a communication template with a person group that has no people in it, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63425 Defect: 144027 Description: When there are multiple messages going out to the outbound queue simultaneously, the following error occurs. ORA-00001 unique constraint (MAXINTMSGTRK-X1) violated Database Scripts: N/A Manual Changes: N/A --- ============================================================================================== End IF005(MBS_71113_LAFIX.20141112-1429.psi.zip) ============================================================================================== ============================================================================================== Begin IF006(MBS_71113_LAFIX.20141210-1340.psi.zip) ============================================================================================== APAR #: IV63864 Defect: 145371 Description: The Datarestriction.getcondition() expression can return a null value and the Mbo.evaluaterestriction method does not check for null. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67281 Defect: 155934 Description: When you run a BIRT report, if there are multiple subselects in the Where parameter and there is a space between the parenthesis and SELECT, the main table qualification is incorrectly done to the subselect. Database Scripts: N/A Manual Changes: N/A --- APAR #: 67265 Defect: 155816 Description: Missing data in the RSCONFIG table causes Maximo to freeze. Database Scripts: N/A Manual Changes: N/A --- ----- ----- ============================================================================================== End IF006(MBS_71113_LAFIX.20141210-1340.psi.zip) ============================================================================================== ============================================================================================== Begin IF007(MBS_71113_LAFIX.20150121-1857.psi.zip) ============================================================================================== ----- ----- --- APAR #: IV67584 Defect: 156554 Description: When multiple users are connected to Maximo and a query is run in the Bulletin Board application, cursors are left open. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67554 Defect: 156649 Description: When you run a query with the Work Flow toolbar button, database cursors remain open after use. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67600 Defect: 156651 Description: There are several unnecessary statements that run during the upgrade process that add unnecessary time to the process. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46701 Defect: 150725 Description: In the Work Order Tracking application, work order generation incorrectly requires rights to Work Order Tracking. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV48028 Defect: 158848 Description: In the Purchase Requisitions application, the GL navigator does not function for default table data until a new row is selected for the purchas requisition and purchase order applications. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65557 Issue: 150357 Description: In the Work Order Tracking application, the Long Description field on the Failure Reporting tab does not populate when you duplicate a work order. Database Scripts: N/A Manual Changes: N/A -------- APAR #: IV66053 Defect: 159095 Description: In the Purchase Order application, when you use the New Row button and manually type in an item number on a purchase order line, an incorrect value is populated in the Price field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68532 Defect: 159079 Description: When you approve an invoice that is connected to a work order that has a purchase order line that references a different site, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68565 Defect: 159120 Description: In the Asset application, when you add a meter to an asset and then change tabs without saving, the meter is removed without notification. Database Scripts: N/A Manual Changes: N/A --- ============================================================================================== End IF007(MBS_71113_LAFIX.20150121-1857.psi.zip) ============================================================================================== ============================================================================================== Begin IF008(MBS_71113_LAFIX.20150218-1508.psi.zip) ============================================================================================== APAR #: IV66904 Defect: 154636 Description: When two different users start a custom class at the same time, one of the users receives an error message. Database Scripts: HF71113_03.msg Manual Changes: N/A --- APAR #: IV57724 Defect: 160168 Description: Maximo cannot properly read the MAXPROPVALUE property. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV28057 Defect: 158575 Description: When you use the Start Empty option on the List tab, the List tab is populated with records and is not empty. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68983 Issue(s): 160562 Description: The Domain lookup for the Specifications attribute does not display domain values properly. Database Scripts: N/A Manual Changes: N/A ============================================================================================== End IF008(MBS_71113_LAFIX.20150218-1508.psi.zip) ============================================================================================== ============================================================================================== Begin IF009(MBS_71113_LAFIX.20150318-1121.psi.zip) ============================================================================================== APAR #: IV67420 Issue(s): 167725 Description: The Preventive Maintenance application generates an empty Project Labor report. Database Scripts: N/A Manual Changes: Requires import. How to publish it to Maximo: http://www-01.ibm.com/support/docview.wss?uid=swg21653964 --- APAR #: IV70445 Issue(s): 165203, 165280 Description: In the Assignment Manager application, you cannot delete the second assignment item. Database Scripts: N/A Manual Changes: N/A --- ============================================================================================== End IF009 (MBS_71113_LAFIX.20150318-1121.psi.zip) ============================================================================================== ============================================================================================== End IF010 (MBS_71113_LAFIX.20150412-2217.psi.zip) ============================================================================================== APAR #: IV44929 Defect(s): 167064 Description: When you set the base language to English and add Spanish as an extra language, when you add a Same As attribute, every object that has that attribute is updated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69102 Defect(s): 161132 Description: When you use a substitute variable in the communication template and then send an email, the Subject line is truncated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV70674 Defect(s): 165788 Description: When you reorder from a PR or PO, the Vendor Delivery Date field is not populated. Database Scripts: N/A Manual Changes: N/A --- APAR : IV70692 Defect : 165927 Description : User may enter originator several times without save before they save. The workorder is sometimes deleted from "Related Records" incorrectly. Mnual Changes : N/A Database Screpts : N/A ============================================================================================== End IF010 (MBS_71113_LAFIX.20150412-2217.psi.zip) ============================================================================================== ============================================================================================== Begin IF011 (MBS_71113_LAFIX.20150513-1514.psi.zip) ============================================================================================== APAR #: IV72371 Issue(s): 171006 Description: The Select Records check box appears on tables that do not have the SELECTMODE=multiple setting. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV72329 Issue(s): 170912 Description: When you only have access to one dialog box in one of the List tab toolbar menus, when you select the cancel button, the dialog box does not close. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV17353 Issue(s): 172145 Description: After you set some limits and tolerances, you cannot approve an invoice. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51538 Issue(s): 172730 Description: When you use the External Systems application to import, an error occurs. Database Scripts: N/A Manual Changes: N/A --- ============================================================================================== End IF011 (MBS_71113_LAFIX.20150513-1514.psi.zip) ============================================================================================== ============================================================================================== VI. Notices ============================================================================================== This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to: Intellectual Property Licensing Legal and Intellectual Property Law IBM Japan, Ltd. 19-21, Nihonbashi-Hakozakicho, Chuo-ku Tokyo 103-8510, Japan The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact: IBM Corporation 2Z4A/101 11400 Burnet Road Austin, TX 78758 U.S.A. Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee. The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us. Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products. All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. If you are viewing this information softcopy, the photographs and color illustrations may not appear. Trademarks IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at Copyright and trademark information at www.ibm.com/legal/copytrade.shtml. Adobe, the Adobe logo, PostScript, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States, and/or other countries. Java and all Java-based trademarks and logos are trademarks of Oracle and/or its affiliates. Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. Intel, Intel logo, Intel Inside, Intel Inside logo, Intel Centrino, Intel Centrino logo, Celeron, Intel Xeon, Intel SpeedStep, Itanium, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries. Privacy Policy Considerations IBM Software products, including software as service solutions, (“Software Offerings”) may use cookies or other technologies to collect product usage information, to help improve the end user experience, to tailor interactions with the end user, or for other purposes. In many cases, no personally identifiable information is collected by the Software Offerings. Some of our Software Offerings can help enable you to collect personally identifiable information. If this Software Offering uses cookies to collect personally identifiable information, specific information about this offering’s use of cookies is set forth below. Depending on the configuration that is deployed in the application server, this Software Offering may use session cookies for session management. These cookies can optionally be enabled or disabled, but disabling the cookies will also disable the functionality that they enable. See the application server documentation for additional information. Optionally, you can also use functionality, such as typeahead, to store data locally on the browser. The data that is stored locally could contain personally identifiable information. For more information, see the Data validation topic in the Maximo Asset Management Information Center: http://pic.dhe.ibm.com/infocenter/tivihelp/v49r1/topic/com.ibm.mbs.doc/designer/c_ctr_data_validation.html If the configurations that are deployed for this Software Offering provide you as customer the ability to collect personally identifiable information from end users by using cookies and other technologies, you should seek your own legal advice about any laws that are applicable to such data collection, including any requirements for notice and consent. For more information about the use of various technologies, including cookies, for these purposes, see IBM’s Privacy Policy at http://www.ibm.com/privacy, IBM's Online Privacy Statement at http://www.ibm.com/privacy/details in the section entitled Cookies, Web Beacons and Other Technologies, and the IBM Software Products and Software-as-a-Service Privacy Statement at http://www.ibm.com/software/info/product-privacy.