IBM Corporation --- IBM(R) Maximo(R) Base Services Release 7.1.1.12 IBM Corporation Note: Before using this information and the product it supports, read the information in the Notices section at the end of this document. (C) Copyright International Business Machines Corporation 2011, 2014. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. =============================================================================================== Table of Contents =============================================================================================== I. Introduction II. Resource Information III. Installation Instructions IV. Manual Changes V. Issues Resolved VI. Notices =============================================================================================== I. Introduction =============================================================================================== Product : Maximo Base Services Version : Release 7.1.1.12 Dependencies : NONE PREREQUISITES : Maximo Base Services Release 7.1.1.12 has been installed CO-REQUISITES : NONE A Interim Fix is a group of critical issues that have been repaired since the product fix packor patch was released. The Interim Fix is cumulative and may contain other fixes in addition to the issues that affect your site. The Interim Fix must be applied in full in order to be supportable. Customers should validate this Interim Fix by installing it in a test environment before rolling it out to a production environment. Interim Fixes, by their very nature, go through a limited quality assurance cycle and may not be included in the latest available program patch. =============================================================================================== II. Resource Information =============================================================================================== Knowledge center URL: http://www-01.ibm.com/support/knowledgecenter/SSLKT6_7.1.0/com.ibm.mam.doc_7.1/mam_welcome.htm Description: Access the knowledge center to view the product documentation. Topics include product overviews; installation and configuration tasks; instructions for using, administering, and troubleshooting the product; and security information. Asset Management community on Service Management Connect URL: https://www.ibm.com/developerworks/servicemanagement/am/ Description: Use Service Management Connect to access the product's blogs, wikis, forums, and communities. In Service Management Connect you can review information such as best practices, performance and tuning, and product integrations. You can also collaborate with IBM experts and the broader user community and access continuous open betas. IBM Maximo Asset Management support resources portal http://www-947.ibm.com/support/entry/portal/overview/software/tivoli/maximo_asset_management Description: The IBM support resources portal provides access to tools and resources to keep your systems, software, and applications running smoothly. From the support resources portal you can find fixes, service requests, useful links and an enhanced search to help you find information quickly. =============================================================================================== III. Installation Instructions =============================================================================================== NOTE For Microsoft Windows 2008 users, you must log in as an administrator before you upgrade to a Maximo Asset Management interim fix pack. If you attempt to upgrade when you are not logged in as an administrator, the installation fails. Follow these steps to apply this Interim Fix: 1 Ensure that no database configuration changes are pending. 2 Shut down the Maximo application server. 3 Back up the database. 4 Copy the Maximo directory. 5 Download the MBS_71112_LAFIX.20141029-1817.psi.zip file. 6 To start the PSI Installer, click All Programs > Tivoli base services > Process Solution Installer. 7 In the Introduction panel, click Next. 8 In the Choose PSI Package panel, click Choose, navigate to the MBS_71112_LAFIX.20141029-1817.psi.zip file, select the file, and click Open. 9 Follow the onscreen instructions. 10 Run the 'updatedb.bat' utility to run all the interim fix database scripts: a. At a DOS prompt, change directory to '\tools\maximo'. For example, c:\IBM\SMP\maximo\tools\maximo. b. Run 'updatedb.bat'. 11 Apply any manual updates listed in this readme.txt file. To find the manual updates for each APAR, the information related to the APAR in the Manual Changes section. 12 Delete the application server cache folders. For Oracle WebLogic Server, delete the 'cache' and 'tmp' folders in \user_projects\domains\mydomain\servers\AdminServer\. Example: C:\bea923\user_projects\domains\max711domain\servers\AdminServer\cache C:\bea923\user_projects\domains\max711domain\servers\AdminServer\tmp For IBM WebSphere(R) Application Server, delete the cache folder in \AppServer\profiles\Custom01\temp\Node01\MAXIMOSERVER 13 Delete the Web browser cache on every computer that uses Maximo base services. 14 Rebuild and redeploy the EAR files, and then restart the application server. =============================================================================================== IV. Manual Changes =============================================================================================== APAR #: IV44092 Issue(s): 95808 Description: In the Lock Out/Tag Out application, when you create a new tag out, in the Lock Out Operations section the Remove Sequence function is applied before the Apply Sequence function. Database Scripts: N/A Manual Changes: 1) Go To->Application Designer and export TAGLOCKS application xml 2) Look for this line: Modify it to look like this:
3) Save file, and restart MX server 4) Log into MX server and navigate to Application Designer. 5) Search for TAGLOCKS application. 6) Import the file taglocks.xml that you have modified in step2. 7) Log out and log back in. --- APAR #: IV45230 Defect: 125421 Description: In the Purchasing application, you are unable to submit a desktop requisition if it contains an item that has a condition that is enabled. Database Scripts: N/A Manual Changes: Change presentation file resources\presentations\system\library.xml as follows: 1) Search for 2) Check to see if this is under the above line: 3) If not, add there. 4) Save the change and import the file using Application Designer. 5) Restart the MX server for the new field to show up. ==================================================================================================== V. Issues Resolved ==================================================================================================== -------- =============================================================================================== Begin IF001 (MBS_71112_LAFIX.20130801-1220.psi.zip) =============================================================================================== -------- Issue(s): 94186 Description: In the Assets application, the Measure Date field is populated with getString(readingDateAttribute) command, and it is not populated by the getDate (ReadingDateAttribute) command. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44088 Issue(s): 98600 Description: In the Work Order Tracking application, the Work Order history does not display when a job plan has a direct issue planned material. Database Scripts: N/A Manual Changes: N/A -------- =============================================================================================== End IF001 (MBS_71112_LAFIX.20130801-1220.psi.zip) =============================================================================================== -------- ============================================================================================== Begin IF002 (MBS_71112_LAFIX.20130903-1142.psi.zip) ============================================================================================== -------- APAR #: IV44092 Issue(s): 95808 Description: In the Lock Out/Tag Out application, when you create a new tag out, in the Lock Out Operations section the Remove Sequence function is applied before the Apply Sequence function. Database Scripts: N/A Manual Changes: Refer to the Manual Changes section for this APAR. -------- =============================================================================================== End IF002 (MBS_71112_LAFIX.20130903-1142.psi.zip) =============================================================================================== -------- ============================================================================================== Begin IF003 (MBS_71112_LAFIX.20131016-1509.psi.zip) ============================================================================================== -------- APAR #: IV44419 Issue(s): 105378 Description: In the Calendars application, the date filter does not work correctly when you change a user's time. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46701 RTC Defect: 108641 Description: In the Work Order Tracking application, work order generation incorrectly requires rights to Work Order Tracking. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV01044 RTC Defect: 109514 Description: In the Publish Channels application, when the Evaluation When rule is set to changed, it returns true even if the value is set to the same value it was set to before. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46511 RTC Defect: 109510 Description: In the Work Order Tracking application, when you add an attachment that is an invalid file type, the file is still uploaded after the error message prompts. Database Scripts: N/A -------- ============================================================================================== End IF003 (MBS_71112_LAFIX.20131016-1509.zip) ============================================================================================== -------- ============================================================================================== Begin IF004 (MBS_71112_LAFIX.20131212-1403.psi.zip) ============================================================================================== -------- APAR #: IV50677 RTC Defect: 111179 Description: When you use Microsoft Internet Explorer 10 and SCCD 7.5.1, if you press the enter key on the list tab you are returned to the Start Center. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49749 RTC Defect: 111819 Description: In the Receiving application, you are unable to complete an inspection when the Change Inspection Status Box prompts. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV20929/12-12889 RTC Defect: 111820 Description: When you open the Drilldown from the Location field, the Drilldown does not open to the Location tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45534 RTC Defect: 111650 Description: A workflow does not start the specified tab when you use Maximo Everyplace. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44907 RTC Defect: 98203 Description: When you install Java version 1.7.0.21, a dialog box is displayed when you select options from the Start Center menu. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50913 RTC Defect: 112435 Description: Company-related accounts are not updated when a synonym COMPTYPE is used. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39184 RTC defect: 100116 Description: Security vulnerability: report clauses Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45182 RTC defect: 115078 Description: When you duplicate a PR, vendor and contract references of the duplicated PR are not read-only. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46299 RTC defect: 115081 Description: In the Invoices application, the GL Debit Account field is inconsistent when you set the type to Standard Services. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47650 RTC defect: 115083 Description: In the Purchase Requisitions application, when you link a purchase requisition to a work order and then change that work order, the original work order that is associated to that purchase requisition still keeps the link to that purchase requisition. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV40210 RTC defect: 115076 Description: In the Service Items appliaction, the site and organization lookups incorrectly display all entries and not just the sites and organizations to which the user is assigned. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51391 RTC defect: 113710 Description: In the Receiving application, after all material on a Work Order is received, the status of the WO remains at WMATL. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46506 Issue(s): 115079 Description: In the Classifications application, when multiple classifications are displayed on a list and you add information to classifications that are not first on the list, the Class Structure ID is defaulted back to the first classifications Class Structure ID. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV43835 Issue(s):114339 Description: In the Work Order Tracking application, when you duplicate work orders with tasks, records in the MULTIASSETLOCCI table are duplicated multiple times. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51795 Issue(s): 116839 Description: In the Inventory application, an assembly transaction does not add the Usage field of subitems to the MATUSETRANS table. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53221 Issue(s): 117447 Description: As a result of security changes in Oracle JRE, applets must be signed and the Applet manifest must contain extra attributes to prevent security warnings. Database Scripts: N/A Manual Changes: Clear Java Applet Caches --- APAR #: IV49268 RTC Defect: 112934 Description: INTERNAL SECURITY: XSS Database Scripts: N/A Manual Changes: N/A -------- ============================================================================================== End IF004 (MBS_71112_LAFIX.20131212-1403.psi.zip) ============================================================================================== -------- ============================================================================================== Begin IF005 (MBS_71112_LAFIX.20140115-1402.psi.zip) ============================================================================================== -------- APAR #: IV43843 Issue(s): 104496 Description: In CI Types application, CIRELATION End date is not populated if CIRELATION deleted via MIF data import. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51076 Issue(s): 111559 Description: After you return to an application from a prompt window, the focus returns to the filter label rather than the first field of the application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52891 Issue(s): 116838 Description: In the Invoices application, when you define a crossover from WORKORDER to INVOICECOST, the crossover fails. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30369 Issue(s): 113678 Description: In the Security Groups application, when you try to specify a default query or edit an existing query, the following error message is displayed: BMXAA0029E - You are not authorized to perform this action for this record. Contact your system administrator to request changes to your authorization. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50875 Defect(s): 119534 Description: When you enter a value in the Invoice Total Tax field, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV43045 Issue(s): 115080 Description: When you append an order by clause that has multiple columns that are selected, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45066 Defect(s): 118679 Description: When you apply a filter, the Total Cost field on a contract is calculated incorrectly. Database Scripts: HF71112_03.dbc Manual Changes: Run interim fix script HF71112_03.dbc -------- ============================================================================================== End IF005 (MBS_71112_LAFIX.20140115-1402.psi.zip) ============================================================================================== -------- ============================================================================================== Begin IF006 (MBS_71112_IFIX.20140218-1510.psi.zip) ============================================================================================== -------- APAR #: IV54264 Defect(s): 120403 Description: In the Application Designer application, if you use Microsoft Internet Explorer 10, you are unable to select controls with a left mouse click. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53966 Defect(s): 120205 Description: In the Application Designer application, when you upgrade from 7.1.1.9 to 7.1.1.12, the POSITEID attribute does not exist and an error occurs in the log. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54578 Defect(s): 121881 Description: In Invoice application, when you invoice a receipt of an item that required inspection, the invoice line's debit GL account is different from the PR and PO lines' GL account. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54578 Defect(s): 121911 Dup of 121935 Description: When you invoice the receipt of an item that required inspection from the Materials tab of the Copy PO Lines dialog on the InvoiceLines tab, the Invoice Line's debit GL account is different from the PR Line's and the PO Line's debit GL account. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54288 Defect(s): 121302 Description: When you change the status of a location from OPERATING to DECOMMISSIONED, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44530 Defect(s): 122019 Description: When you put the SmartCloud Control Desk into maintenance mode, the program freezes. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52631 Defect(s): 117962 Description: If you enter measurements or observations via work order tasks that reference measurement points, entries are generated in MEASUREMENT but the WOMETER is not updated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30761 Defect(s): 123585 Description: In the Labor application, you are unable to perform a wildcard search with the CraftRate lookup. Database Scripts: N/A Manual Changes: N/A -------- ============================================================================================== End IF006 (MBS_71112_IFIX.20140218-1510.psi.zip) ============================================================================================== -------- ============================================================================================== Begin IF007 (MBS_71112_IFIX.20140321-1336.psi.zip) ============================================================================================== -------- APAR #: IV55352 Defect: 123869 Description: In the Purchasing application, when you select some items for return, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39179 Defect: 125418 Description: When an ad hoc report is created and it incorporates local functions to present the correct descriptions, it does not always produce the correct description. Database Scripts: N/A Manual Changes : This change only affects new QBR reports. Existing reports must be recreated to be affected. --- APAR #: IV42630 Defect: 125417 Description: When there are multiple organizations with the same MR number and one of those MR numbers is closed, the Change Status list for the other MR is empty. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46140 Defect: 125426 Description: You are unable to move an asset back to an old site if there is a decomissioned location on the Decomissioned Asset record. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44560 Defect(s): 125445 Description: When you add a system to a site that does not have a primary system that is established, an error occurs that does not allow a primary system to be set up for the site. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45230 Defect: 125421 Description: In the Purchasing application, you are unable to submit a desktop requisition if it contains an item that has a condition that is enabled. Database Scripts: N/A Manual Changes: Change presentation file resources\presentations\system\library.xml as follows: 1) Search for 2) Check to see if this is under the above line: 3) If not, add there. 4) Save the change and import the file using Application Designer. 5) Restart the MX server for the new field to show up. --- APAR #: IV47462 Defect(s): 125428 Description: When you clear the Issue on Receipt check box and then approve the PO, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV43036 Defect: 125320 Description: In the View Requisitions application, when you attempt to change the MR Number field, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46770 Issue(s): 125427 Description: A security group that has access to the Inventory application does not have access to adjust the current inventory balances. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV40704 Defect: 115077 Description: In the Create Service Requests application, users that are restricted to limited sites are able to view and select assets from sites they do not have authorization to access via the Create Service Request application. Database Scripts: N/A Manual Changes: N/A -------- ============================================================================================== End IF007 (MBS_71112_IFIX.20140321-1336.psi.zip) ============================================================================================== -------- ============================================================================================== Begin IF008 (MBS_71112_IFIX.20140410-0935.psi.zip) ============================================================================================== -------- APAR #: IV55289 Defect(s): 126401 Description: In the Invoices application, when you link to a purchase order screen in an invoice, the search does not work. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52122 Defect(s): 127261 Description: In the Assets applications, when you change the location status of a record to "Decommissioned" and there is a preventive maintenance record with an inactive status, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55915 Defect(s): 127367 Description: In the Purhcasing Requisitions application, there are inconsistencies with Storeroom and Conversion Factor fields set to read-only or editable. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56680 Defect(s): 127377 Description: If you create a new result set portlet, and enter XSS attack strings in the Display Name, when the portlet is viewed, the Legend Attribute Title and Legend Value Title fields are triggered. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV58088 Defect(s): 128848 Description: When you try to receive a service line against a purhcase order, and you add two new security groups are added to the user profile, an error occurs. The message, "BMXAA3140E - The receipt cannot be created for the selected row 1." Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54187 Defect(s): 123696 Description: When you enter actual labor in a time zone that is ahead of the your server time zone, and you enter an End Time value that is in the future, an error occurs. The message, "BMXAA2569E - Finish date and time must be later than start date and time," is displayed. Database Scripts: N/A Manual Changes: N/A --- ============================================================================================== End IF008 (MBS_71112_IFIX.20140410-0935.psi.zip) ============================================================================================== ============================================================================================== Begin IF009 (MBS_71112_LAFIX.20140521-1147.psi.zip) ============================================================================================== APAR #: IV57457 Defect(s): 128586 Description: When a language other than English is set as default, the log out message is in English when form-based authentication is used. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59279 Defect(s): 130677 Description: You cannot see all items or standard service items in the Item Lookup. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47809 Defect(s): 131022 Description: Commas are replaced by periods in email communications. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59067 Defect(s): 130787 Description: When you add an action to a task and save the task, when you remove the action, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45367 Defect(s): 131814 Description: The system does not prompt you for an electronic signature when you set the Security Control option in the Users or Security Groups application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV43854 Defect(s): 131810 Description: When you specify more that one email address in the Inventory Reorder Email Address Notification field, no email notifications are sent. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55717 Defect(s): 131816 Description: The status of a receipt is changed from partial to none on a completion receipt when no lines were received. Database Scripts: N/A Manual Changes: N/A --- ============================================================================================== End IF009 (MBS_71112_LAFIX.20140521-1147.psi.zip) ============================================================================================== ============================================================================================== Begin IF010(MBS_71112_LAFIX.20140625-1402.psi.zip) ============================================================================================= APAR #: IV56643 Defect(s): 133651 Description: In the SmartCloud Control Desk 7511, when you run a BIRT report, the CSRF token can be modified. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34122 Defect(s): 137251 Description: When you change the quantity of the Materials on a WO to 1, there are multiple reservations recorded. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60977 Defect(s): 136666 Description: In the Labor Reporting application, the Select Record check box is missing. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51667 Defect(s): 135187 Description: In the Database Configuration application, when you sign in to Maximo with a non-English language, you cannot save changes to the DB configuration application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44929 Defect(s): 135604 Description: When you use a base language of English and an extra language as Spanish, when you update an object that has an attribute, all objects with that attribute have a To Be Changed status. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59960 Defect(s): 132649 Description: When you apply the fix for APAR IV24726, the Or function no longer works in searches. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ51060 Defect(s): 134010 Description: Integration Framework file based reprocessing reports an inaccurate count of errors and thus does not detect when it has completed processing the file. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34502 Defect(s): 129224 Description: When you change the status of a PM work order to Approved, a duplicate reservation line is created. Database Scripts: N/A Manual Changes: N/A ============================================================================================== End IF010 (MBS_71112_LAFIX.20140625-1402.psi.zip) ============================================================================================== ============================================================================================== Begin IF011 (MBS_71112_LAFIX.20140813-1030.psi.zip) ============================================================================================== APAR #: IV62038 Defect(s): 140319 Description: In the Purchasing application, when you add a purchase order and change the inspection status, there are discrepancies in the receipt, transfer, and invoice line costs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49794 Defect(s): 141058 Description: After a PM meter-based work order is canceled, the PM WOGEN cron task runs and generates a work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62345 Defect(s): 141050 Description: When a PM work order is canceled, the Next Due Date field is set to null. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62061 Defect(s): 139261 Description: In the Work Order Tracking application, when you enter a meter reading from the Detail menu, an error message displays. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59068 Defect(s): 131050,141578 Description: In the Work Order tracking application, you can change a status with a current date, even though a previous status change had a future date. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63329 Defect(s): 144049 Description: After applying LAFIX.20140625, preview of QBR report and drill through throw 500 error. Database Scripts: N/A Manual Changes: N/A ============================================================================================== End IF011 (MBS_71112_LAFIX.20140813-1030.psi.zip) ============================================================================================== ============================================================================================== Begin IF012 (MBS_71112_LAFIX.20140904-0745.psi.zip) ============================================================================================== --- APAR #: IV61707 Defect(s): 138285 Description: Integration error when updating item records, "BMXAA0266E - NOT A VALID COMMODITY CODE" Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ91185 Defect(s): 122681 Description: In the Login Tracking table, when you log out or timeout, an incorrect value displays. Database Scripts: N/A Manual Changes: N/A ============================================================================================== End IF012 (MBS_71112_LAFIX.20140904-0745.psi.zip) ============================================================================================== ============================================================================================== Start IF013 (MBS_71112_LAFIX.20141001-1334.psi.zip) ============================================================================================== APAR #: IV63670 Defect(s): 145692 Description: When you use a hyperlink from a report to open a different report, some hyperlinks fail to work and show details. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64824 Defect(s): 147934 Description: After you add text to a Long Description record, you are unable to close the Long Description dialog. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59845 Defect(s): 132112 Description: In the Escalations application, you are not able to select persistent objects that are not marked as main. Database Scripts: N/A Manual Changes: N/A --- ============================================================================================== End IF013 (MBS_71112_LAFIX.20141001-1334.psi.zip) ============================================================================================== ============================================================================================== Begin IF014 (MBS_71112_LAFIX.20141029-1817.psi.zip) ============================================================================================== APAR #: IV60977 Defect(s): 136666 Description: In the Labor Reporting application, the Select Record check box is missing. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57457 Defect(s): 128586 Description: When you implement the Lightweight Directory Access Protocol and the default language is set to French, the Log Out message appears in English. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38540 Defect(s): 149676 Description: Escalation tasks incorrectly create a separate database for each task. This negatively effects the performance of Maximo when numerous tasks are entered. Database Scripts: N/A Manual Changes: N/A --- ============================================================================================== End IF014 (MBS_71112_LAFIX.20141029-1817.psi.zip) ============================================================================================== APAR #: IV65548 Defect: 150652 Description: BMXAA4214E error when selecting a communication template with a person group that has no people in it. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV31819 Defect: 156341 Description: From charge information section,work order field, select value box brings up historical records. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV48028 Defect: 158846 Description: In the Purchase Requisitions application, the GL navigator does not work for default table data until a new row is selected for the PR and PO application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68565 Defect: 159696 Description: When a meter is added to a new, duplicated, unsaved asset, the meter disappears from the Meters table window when the new duplicated asset is ultimately saved. Database Scripts: N/A Manual Changes: N/A --- ============================================================================================== VI. Notices ============================================================================================== This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to: Intellectual Property Licensing Legal and Intellectual Property Law IBM Japan, Ltd. 19-21, Nihonbashi-Hakozakicho, Chuo-ku Tokyo 103-8510, Japan The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact: IBM Corporation 2Z4A/101 11400 Burnet Road Austin, TX 78758 U.S.A. Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee. The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us. Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products. All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. If you are viewing this information softcopy, the photographs and color illustrations may not appear. Trademarks IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at Copyright and trademark information at www.ibm.com/legal/copytrade.shtml. Adobe, the Adobe logo, PostScript, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States, and/or other countries. Java and all Java-based trademarks and logos are trademarks of Oracle and/or its affiliates. Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. Intel, Intel logo, Intel Inside, Intel Inside logo, Intel Centrino, Intel Centrino logo, Celeron, Intel Xeon, Intel SpeedStep, Itanium, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries. Privacy Policy Considerations IBM Software products, including software as service solutions, (“Software Offerings”) may use cookies or other technologies to collect product usage information, to help improve the end user experience, to tailor interactions with the end user, or for other purposes. In many cases, no personally identifiable information is collected by the Software Offerings. Some of our Software Offerings can help enable you to collect personally identifiable information. If this Software Offering uses cookies to collect personally identifiable information, specific information about this offering’s use of cookies is set forth below. Depending on the configuration that is deployed in the application server, this Software Offering may use session cookies for session management. These cookies can optionally be enabled or disabled, but disabling the cookies will also disable the functionality that they enable. See the application server documentation for additional information. Optionally, you can also use functionality, such as typeahead, to store data locally on the browser. The data that is stored locally could contain personally identifiable information. For more information, see the Data validation topic in the Maximo Asset Management Information Center: http://pic.dhe.ibm.com/infocenter/tivihelp/v49r1/topic/com.ibm.mbs.doc/designer/c_ctr_data_validation.html If the configurations that are deployed for this Software Offering provide you as customer the ability to collect personally identifiable information from end users by using cookies and other technologies, you should seek your own legal advice about any laws that are applicable to such data collection, including any requirements for notice and consent. For more information about the use of various technologies, including cookies, for these purposes, see IBM’s Privacy Policy at http://www.ibm.com/privacy, IBM's Online Privacy Statement at http://www.ibm.com/privacy/details in the section entitled Cookies, Web Beacons and Other Technologies, and the IBM Software Products and Software-as-a-Service Privacy Statement at http://www.ibm.com/software/info/product-privacy.