Collection Services data files: QAPMLAPD
This database file includes integrated services digital network LAPD file entries and lists the fields in the LAPD file.
| Field Name | Description | Attribute |
|---|---|---|
| INTNUM | Interval number: The nth sample database interval based on the start time specified in the Create Performance Data (CRTPFRDTA) command. | PD (5,0) |
| DTETIM | Interval date (yymmdd) and time (hhmmss): The date and time of the sample interval. | C (12) |
| INTSEC | Elapsed interval seconds: The number of seconds since the last sample interval. | PD (7,0) |
| IOPRN | IOP resource name. | C(10) |
| LDIOP | Reserved. | C(1) |
| LDTYPE | The resource type of the IOP or adapter represented by this record. | C (4) |
| LDNWI | Network interface: The name of the network interface description. | C (10) |
| LDLSP | Link speed: The speed of this channel in bits per second. | PD (11,0) |
| LDPRCL | Protocol type: D for LAPD. | C (1) |
| LPLOFA | Loss of frame alignment: Total number of times when a time period equivalent to two 48-bit frames has elapsed without having detected valid pairs of line code violations. | PD (11,0) |
| LPLECV | Reserved. | PD (11,0) |
| LPDTSI | Reserved. | PD (11,0) |
| LPDTSO | Reserved. | PD (11,0) |
| LPFECV | Reserved. | PD (11,0) |
| LPES | Errored seconds: Total number of seconds that had one or more path coding violations, one or more out of frame defects, one or more controlled slip events, or a detected alarm indication signal defect. | PD (5,0) |
| LPSES | Severely errored seconds: Total number of seconds that had
320 or more path coding violation error events, one or more out of
frame defects, or a detected alarm indication signal event.
|
PD (5,0) |
| LPCOL | Collision detect: The number of times the TE detected that its transmitted frame had been corrupted by another TE attempting to use the same bus. | PD (11,0) |
| LLCRCE | Receive CRC errors: The number of received frames that contain a CRC (cycle redundancy check) error. | PD (11,0) |
| LLSFE | Short frame errors: The number of short frames received. A short frame is a frame that has fewer octets between its start flag and end flag than is permitted. | PD (11,0) |
| LLORUN | Receive overrun: The number of times the ISDN subsystem could not keep pace with incoming data because of local controller overload. | PD (11,0) |
| LLURUN | Transmit underrun: The number of times the ISDN subsystem could not keep pace with outgoing data because of local controller overload. | PD (11,0) |
| LLABRT | Aborts received: The number of frames received that contained HDLC abort indicators. | PD (11,0) |
| LLFRIE | Frames received in error: The sum of receive cycle redundancy check (CRC) errors, short frame errors, receive overrun, transmit underrun, aborts received, and frame sequence errors (LLCRCE, LLSFE, LLORUN, LLURUN, LLABRT, LSSEQE). | PD (11,0) |
| LSFRT | Retransmitted frames. | PD (11,0) |
| LSSEQE | Sequence errors: The number of received frames that contained sequence numbers indicating frames were lost. | PD (11,0) |
| LSFTRN | Total number of frames transmitted: This includes information (I), unnumbered information (UI), and supervisory (S) frames sent to a remote link station. This includes frames retransmitted and frames sent on transmissions stopped by transmit underrun, in addition to successful transmissions. | PD (11,0) |
| LSFRCV | Total number of frames received: This includes information (I), unnumbered information (UI), and supervisory (S) frames received from the remote link station. This includes no errors. | PD (11,0) |
| LSBTRN | Total bytes transmitted: The total number of bytes transmitted to a remote link station. This includes bytes retransmitted and bytes sent on transmissions stopped by a transmit underrun, in addition to successful transmissions. | PD (11,0) |
| LSBRCV | Total bytes received: The total number of bytes received from the remote link station. This includes no errors. | PD (11,0) |
| LQTOC | Total outgoing calls: The number of outgoing call attempts. For X.31 this includes outgoing SETUP messages requesting a packet switched connection. For Q.932, outgoing REGISTER messages are not included in this count. | PD (11,0) |
| LQROC | Retry for outgoing calls: The number of outgoing calls that were rejected by the network. For X.31 this includes retry for outgoing SETUP messages requesting a packet switched connection. For Q.932, retry for outgoing REGISTER messages are not included in this count. | PD (11,0) |
| LQTIC | Total incoming calls: The number of incoming call attempts. For X.31 this includes incoming SETUP messages requesting a packet switched connection. For Q.932, incoming REGISTER messages are not included in this count. | PD (11,0) |
| LQRIC | Rejected incoming calls: The number of incoming calls that are rejected by the TE. For passive bus, the call may be intended for another TE that shares the same passive bus. This includes calls rejected both directly by the IOP and by the IOM. For X.31 this includes rejected incoming SETUP messages requesting a packet switched connection. For Q.932, rejected incoming REGISTER messages are not included in this count. | PD (11,0) |
| LDCHLS1 | S1 maintenance channel: Set to one if the S1 maintenance channel was active. | PD (1,0) |
| LPLES | Line errored seconds: The number of seconds that had one or more line coding violations. | PD (5,0) |
| LPCSS | Controlled slip seconds: The number of seconds that had one or more controlled slip events. | PD (5,0) |
| LPBES | Bursty errored seconds (error second type B): The number of seconds that had greater than one but fewer than 320 path coding violation error events, no severely errored frame defects, and no detected incoming alarm indication signal defects. | PD (5,0) |
| LPSEFS | Severely errored framing seconds: The number of seconds that had one or more out of frame defects or a detected alarm indication signal defect. | PD (5,0) |
| LPDM | Degraded minutes: The number of minutes during which the estimated error rate exceeds 1E-6 but does not exceed 1E-3. | PD (5,0) |
| LPUS | Unavailable seconds: The number of seconds during which the interface is unavailable. | PD (5,0) |